Nanoparticles and Single Atoms in Commercial Carbon-Supported Platinum-Group Metal Catalysts

Probing Basal and Prismatic Planes of Graphitic Materials for Metal Single Atom and Subnanometer Cluster Stabilization

Supported metal single atom catalysis is a dynamic research area in catalysis science combining the advantages of homogeneous and heterogeneous catalysis. Understanding the interactions between metal single atoms and the support constitutes a challenge facing the development of such catalysts, since these interactions are essential in optimizing the catalytic performance. For conventional carbon supports, two types of surfaces can contribute to single atom stabilization: the basal planes and the prismatic surface; both of which can be decorated by defects and surface oxygen groups. To date, most studies on carbon-supported single atom catalysts focused on nitrogen-doped carbons, which, unlike classic carbon materials, have a fairly well-defined chemical environment. Herein we report the synthesis, characterization and modeling of rhodium single atom catalysts supported on carbon materials presenting distinct concentrations of surface oxygen groups and basal/prismatic surface area. The influence of these parameters on the speciation of the Rh species, their coordination and ultimately on their catalytic performance in hydrogenation and hydroformylation reactions is analyzed. The results obtained show that catalysis itself is an interesting tool for the fine characterization of these materials, for which the detection of small quantities of metal clusters remains a challenge, even when combining several cutting-edge analytical methods.

Single-Atom Catalysts on Covalent Triazine Frameworks: at the Crossroad between Homogeneous and Heterogeneous Catalysis

Heterogeneous single-site and single-atom catalysts potentially enable combining the high catalytic activity and selectivity of molecular catalysts with the easy continuous operation and recycling of solid catalysts. In recent years, covalent triazine frameworks (CTFs) found increasing attention as support materials for particulate and isolated metal species. Bearing a high fraction of nitrogen sites, they allow coordinating molecular metal species and stabilizing particulate metal species, respectively. Dependent on synthesis method and pretreatment of CTFs, materials resembling well-defined highly crosslinked polymers or materials comparable to structurally ill-defined nitrogen-containing carbons result. Accordingly, CTFs serve as model systems elucidating the interaction of single-site, single-atom and particulate metal species with such supports. Factors influencing the transition between molecular and particulate systems are discussed to allow deriving tailored catalyst systems.

Single atoms and small clusters of atoms may accompany Au and Pd dendrimer-encapsulated nanoparticles

We report the presence of small clusters of atoms (<1 nm) (SCs) and single atoms (SAs) in solutions containing 1-2 nm dendrimer-encapsulated nanoparticles (DENs). Au and Pd DENs were imaged using aberration-corrected scanning transmission electron microscopy (ac-STEM), and energy dispersive spectroscopy (EDS) was used to identify and quantify the SAs/SCs. Two main findings have emerged from this work. First, the presence or absence of SAs/SCs depends on both the terminal functional group of the dendrimer (-NH₂ or -OH) and the elemental composition of the DENs (Au or Pd). Second, dialysis can be used to remove the majority of SAs/SCs in cases where a high density of SAs/SCs are present. The foregoing conclusions provide insights into the mechanisms for Au and Pd DEN synthesis and stability. Ultimately, these results demonstrate the need for careful characterization of systems containing nanoparticles to ensure that SAs/SCs, which may be below the detection limit of most analytical methods, are taken into consideration (especially for catalysis experiments).

Chemo-bio catalysis using carbon supports: application in H2-driven cofactor recycling

Heterogeneous biocatalytic hydrogenation is an attractive strategy for clean, enantioselective C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> X reduction. This approach relies on enzymes powered by H₂-driven NADH recycling. Commercially available carbon-supported metal (metal/C) catalysts are investigated here for direct H₂-driven NAD⁺ reduction. Selected metal/C catalysts are then used for H₂ oxidation with electrons transferred via the conductive carbon support material to an adsorbed enzyme for NAD⁺ reduction. These chemo-bio catalysts show improved activity and selectivity for generating bioactive NADH under ambient reaction conditions compared to metal/C catalysts. The metal/C catalysts and carbon support materials (all activated carbon or carbon black) are characterised to probe which properties potentially influence catalyst activity. The optimised chemo-bio catalysts are then used to supply NADH to an alcohol dehydrogenase for enantioselective (>99% ee) ketone reductions, leading to high cofactor turnover numbers and Pd and NAD⁺ reductase activities of 441 h⁻¹ and 2347 h⁻¹, respectively. This method demonstrates a new way of combining chemo- and biocatalysis on carbon supports, highlighted here for selective hydrogenation reactions.

Heterogeneous chemo-bio catalytic hydrogenation is an attractive strategy for clean, enantioselective CX reduction.

Cooperativity in supported metal single atom catalysis

The discussion concerning cooperativity in supported single-atom (SA) catalysis is often limited to the metal-support interaction, which is certainly important, but which is not the only lever for modifying the catalytic performance. Indeed, if the interaction between the SA and the support, which can be seen as a solid ligand presenting its own specificities that fix the first coordination sphere of the metal, plays a central role as in homogeneous catalysis, other factors can strongly contribute to modification of the activity, selectivity and stability of SAs. Therefore, in this mini-review, we briefly summarize the importance of the support (oxide, carbon or a second metal) in SA photo- electro- and thermal-catalysis (support-assisted operation), and concentrate on other types of cooperativities that in some cases enable previously impossible reaction pathways on supported metal SAs. This includes topics that are not specific to SA catalysis, such as metal-ligand or heterobimetallic cooperativity, and cooperativity which is SA-specific such as nanoparticle-SA or mixed-valence SA cooperativity.

Preprints in Chemistry: An Exploratory Analysis of Differences with Journal Articles

The exploratory analysis of the differences between preprints and the corresponding peer reviewed journal articles for ten studies first published on ChemRxiv and on Preprints, though statistically non-significant, suggests outcomes of relevance for chemistry researchers and educators. The full transition to open science requires new education of doctoral students and young researchers on scholarly communication in the digital age. The preliminary findings of this study will contribute to inform the curriculum of the aforementioned new courses for young chemists, eventually promoting accelerated innovation in a science that, unique amid all basic sciences, originates a huge industry central to the wealth of nations.

Control of the single atom/nanoparticle ratio in Pd/C catalysts to optimize the cooperative hydrogenation of alkenes

Control of the single atom/nanoparticle ratio allows preparation of highly active Pd/C hydrogenation catalysts integrating the ultra-rational use of Pd.

Ru single atoms and nanoparticles on carbon nanotubes as multifunctional catalysts

In the last decade we have witnessed increasing interest in the production of renewable energy and value-added chemicals through sustainable and low-cost technologies where catalysts play a crucial role. Herein, we report the application of a Ru/CNT material containing a mixture of Ru single atoms and Ru nanoparticles as a multifunctional catalyst for both the catalytic reduction of nitroarenes and the electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The catalytic activity of the Ru-CNT material was evaluated in the reduction of 4-nitrophenol (4-NP), 4-nitroaniline (4-NA) and 2-nitrophenol (2-NP) in the presence of sodium borohydride as a reducing agent at room temperature, showing high catalytic activity with normalized rate constants (k_nor) of 19.0 × 10³, 57.7 × 10³ and 16.6 × 10³ min^-1 mmol^-1 respectively. Furthermore, the catalyst could be reused in at least 10 cycles without catalytic activity loss, confirming the high stability and robustness of the material. The Ru/CNT material also showed good ORR electrocatalytic activity in alkaline medium with E_onset of 0.76 V vs. RHE, a diffusion-limited current density of 3.89 mA cm^-2 and ñ_O2 of 3.3. In addition, Ru/CNT was remarkably insensitive to methanol with a current retention of 93% (51% for Pt/C) and competitive electrochemical stability of 80% after 20 000 s. Moreover, Ru/CNT was active for the OER with j_max = 29.5 mA cm^-2 at E = 1.86 V vs. RHE, η₁₀ = 0.50 V and good stability (η₁₀ changed to 0.01 V and j_max only decreased by ≈12% after 500 cycles).

Aqueous Dehydration, Hydrogenation and Hydrodeoxygenation Reactions of Bio-Based Mucic Acid over Ni, NiMo, Pt, Rh, and Ru on Neutral or Acidic Catalyst Supports

Hydrotreatment of mucic acid (also known as galactaric acid, an glucaric acid enantiomer), one of the most promising bio-based platform chemicals, was systematically investigated in aqueous media over alumina, silica, or carbon-supported transition (nickel and nickel-molybdenum) or noble (platinum, ruthenium and rhodium) metals. Mucic acid was only converted into mucic-1,4-lactone under non-catalytic reaction conditions in N2 atmosphere, while the 5 MPa gaseous H2 addition triggers hydrogenation in the bulk phase, resulting in formation of galacturonic and galactonic acid. However, dehydroxylation, hydrogenation, decarbonylation, decarboxylation, and cyclization occurred during catalytic hydrotreatment, forming various partially and completely deoxygenated products with a chain length of 3–6 C atoms. Characterization results of tested catalysts were correlated with their activity and selectivity. Insufficient pore diameter of microporous supports completely hindered the mass transfer of reactants to the active sites, resulting in negligible conversion of mucic acid. A comprehensive reaction pathway network was proposed and several industrially interesting compounds were formed, including levulinic acid, furoic acid, and adipic acid. However, selectivity towards adipic acid, a bio-based nylon 6,6 precursor, was low (up to 5 mol%) in aqueous media and elevated temperatures.