Microbiological Quality Assessment of Chicken Thigh Fillets Using Spectroscopic Sensors and Multivariate Data Analysis

Deep machine learning identified fish flesh using multispectral imaging

Food fraud is widespread in the aquatic food market, hence fast and non-destructive methods of identification of fish flesh are needed. In this study, multispectral imaging (MSI) was used to screen flesh slices from 20 edible fish species commonly found in the sea around Yantai, China, by combining identification based on the mitochondrial COI gene. We found that nCDA images transformed from MSI data showed significant differences in flesh splices of the 20 fish species. We then employed eight models to compare their prediction performances based on the hold-out method with 70% training and 30% test sets. Convolutional neural network (CNN), quadratic discriminant analysis (QDA), support vector machine (SVM), and linear discriminant analysis (LDA) models perform well on cross-validation and test data. CNN and QDA achieved more than 99% accuracy on the test set. By extracting the CNN features for optimization, a very high degree of separation was obtained for all species. Furthermore, based on the Gini index in RF, 11 bands were selected as key classification features for CNN, and an accuracy of 98% was achieved. Our study developed a successful pipeline for employing machine learning models (especially CNN) on MSI identification of fish flesh, and provided a convenient and non-destructive method to determine the marketing of fish flesh in the future.

Features in visible and Fourier transform infrared spectra confronting aspects of meat quality and fraud

Rapid assessment of microbiological quality (i.e., Total Aerobic Counts, TAC) and authentication (i.e., fresh vs frozen/thawed) of meat was investigated using spectroscopic-based methods. Data were collected throughout storage experiments from different conditions. In total 526 spectra (Fourier transform infrared, FTIR) and 534 multispectral images (MSI) were acquired. Partial Least Squares (PLS) was applied to select/transform the variables. In the case of FTIR data 30 % of the initial features were used, while for MSI-based models all features were employed. Subsequently, Support Vector Machines (SVM) regression/classification models were developed and evaluated. The performance of the models was evaluated based on the external validation set. In both cases MSI-based models (Root Mean Square Error, RMSE: 0.48-1.08, Accuracy: 91-97 %) were slightly better compared to FTIR (RMSE: 0.83-1.31, Accuracy: 88-94 %). The most informative features of FTIR for the case of quality were mainly in 900-1700 cm-1, while for fraud the features were more dispersed.

Optimization of dry-aging conditions for chicken meat using the electric field supercooling system

This study was designed to determine the optimal aging conditions after analyzing the physicochemical and microbiological properties of dry-aged chicken breast using an electric field supercooling system (EFSS). Chicken breast was aged for up 5 weeks at three different temperatures (0°C, -1°C, and -2°C). Aging and trimming loss at -2°C treatment showed lower values than at 0°C and -1°C treatments. Thiobarbituric acid reactive substances and volatile basic nitrogen in all treatments increased during the aging process but showed the lowest levels at -2°C. As a result of analysis of aerobic bacteria, it is microbiologically safe to dry-age for up to 2 weeks at 0°C and up to 3 weeks at -1°C and -2°C. Therefore, the dry-aged chicken breast with EFSS was optimally aged for 3 weeks at -2°C.

Preliminary investigation into the prediction of indicators of beef spoilage using Raman and Fourier transform infrared spectroscopy

The objective of this study was to assess the potential to predict the microbial beef spoilage indicators by Raman and Fourier transform infrared (FT-IR) spectroscopies. Vacuum skin packaged (VSP) beef steaks were stored at 0 °C, 4 °C, 8 °C and under a dynamic temperature condition (0 °C ∼ 4 °C ∼ 8 °C, for 36 d). Total viable count (TVC) and total volatile basic nitrogen (TVB-N) were obtained during the storage period along with spectroscopic data. The Raman and FTIR spectra were baseline corrected, pre-processed using Savitzky-Golay smoothing and normalized. Subsequently partial least squares regression (PLSR) models of TVC and TVB-N were developed and evaluated. The root mean squared error (RMSE) ranged from 0.81 to1.59 (log CFU/g or mg/100 g) and the determination coefficient (R²) from 0.54 to 0.75. The performance of PLSR model based on data fusion (combination of Raman and FT-IR data) is better than that based on Raman spectra and similar to that of FT-IR. Overall, Raman spectroscopy, FT-IR spectroscopy, and a combination of both exhibited a potential for the prediction of the beef spoilage.

Assessment of the Microbial Spoilage and Quality of Marinated Chicken Souvlaki through Spectroscopic and Biomimetic Sensors and Data Fusion

Fourier-transform infrared spectroscopy (FT-IR), multispectral imaging (MSI), and an electronic nose (E-nose) were implemented individually and in combination in an attempt to investigate and, hence, identify the complexity of the phenomenon of spoilage in poultry. For this purpose, marinated chicken souvlaki samples were subjected to storage experiments (isothermal conditions: 0, 5, and 10 °C; dynamic temperature conditions: 12 h at 0 °C, 8 h at 5 °C, and 4 h at 10 °C) under aerobic conditions. At pre-determined intervals, samples were microbiologically analyzed for the enumeration of total viable counts (TVCs) and Pseudomonas spp., while, in parallel, FT-IR, MSI, and E-nose measurements were acquired. Quantitative models of partial least squares–Regression (PLS-R) and support vector machine–regression (SVM-R) (separately for each sensor and in combination) were developed and validated for the estimation of TVCs in marinated chicken souvlaki. Furthermore, classification models of linear discriminant analysis (LDA), linear support vector machine (LSVM), and cubic support vector machines (CSVM) that classified samples into two quality classes (non-spoiled or spoiled) were optimized and evaluated. The model performance was assessed with data obtained by six different analysts and three different batches of marinated souvlaki. Concerning the estimation of the TVCs via the PLS-R model, the most efficient prediction was obtained with spectral data from MSI (root mean squared error—RMSE: 0.998 log CFU/g), as well as with combined data from FT-IR/MSI (RMSE: 0.983 log CFU/g). From the developed SVM-R models, the predictions derived from MSI and FT-IR/MSI data accurately estimated the TVCs with RMSE values of 0.973 and 0.999 log CFU/g, respectively. For the two-class models, the combined data from the FT-IR/MSI instruments analyzed with the CSVM algorithm provided an overall accuracy of 87.5%, followed by the MSI spectral data analyzed with LSVM, with an overall accuracy of 80%. The abovementioned findings highlighted the efficacy of these non-invasive rapid methods when used individually and in combination for the assessment of spoilage in marinated chicken products regardless of the impact of the analyst, season, or batch.

Development and Validation of a Simple Method to Quantify Contents of Phospholipids in Krill Oil by Fourier-Transform Infrared Spectroscopy

This study focuses on developing a quantification method for phosphatidylcholine (PC) and total phospholipid (PL) in krill oil using Fourier-transform infrared (FT-IR) spectroscopy. Signals derived from the choline and phosphate groups were selected as indicator variables for determining PC and total PL content; calibration curves with a correlation coefficient of >0.988 were constructed with calibration samples prepared by mixing krill oil raw material and fish oil in different ratios. The limit of detection (LOD, 0.35–3.29%) of the method was suitable for the designed assay with good accuracy (97.90–100.33%). The relative standard deviations for repeatability (0.90–2.31%) were acceptable. Therefore, both the methods using absorbance and that using second-derivative were confirmed to be suitable for quantitative analysis. When applying this method to test samples, including supplements, the PC content and total PL content were in good agreement with an average difference of 2–3% compared to the 31P NMR method. These results confirmed that the FT-IR method can be used as a convenient and rapid alternative to the 31P NMR method for quantifying PLs in krill oil.