Effects of Radio Frequency Pretreatment on Quality of Tree Peony Seed Oils: Process Optimization and Comparison with Microwave and Roasting

Effect of radio frequency pretreatment on the component of rapeseed and its product: Comparative study with microwave pretreatment under different oil extraction methods

Radio frequency (RF) is an emerging technology for rapeseed pretreatment, offering a comparison to the established microwave (MW) technique. This study investigated the effects of RF and MW pretreatment combined with different oil extraction methods on the oil yield, quality characteristics and lipid concomitant contents of rapeseed and its products. Results indicated that RF combined with pressing extraction yielded the highest tocopherol and canolol contents in rapeseed oil (839.6 and 1316.4 mg/kg, 8.0 % and 7.9 times higher than the control, respectively), and MW combined with supercritical carbon dioxide fluid extraction yielded the highest phytosterol content (8402.0 mg/kg, 16.6 % higher than the control). These results indicate the effectiveness of RF as a novel pretreatment method for rapeseed and its potentially greater advantage than MW. Results also imply that RF could contribute to sustainable and efficient oil extraction processes in the future food industry owing to its high efficiency and energy-saving capability.

Phytosterol-enriched Camellia oleifera Abel seed oil obtained by subcritical butane extraction: Physicochemical properties and oxidative stability

Tea (Camellia oleifera Abel) seed oil (TSO) has antioxidant and pharmacological properties. In this study, TSO was obtained from tea seeds by subcritical n-butane extraction (SBE), which is an environmentally friendly method. The oil yield, quality characteristics, and chemical composition of the extracted TSO were compared with those of oils obtained by supercritical carbon dioxide extraction (SCDE) and conventional cold pressing (CP). The TSO yield from SBE (51.35 %) was similar to that from SCDE (50.30 %), but higher than that from CP (31.82 %). TSO from SBE had better oxidative stability than that from SCDE and a lower toxic aldehyde content (0.41 mg/L) than that from SCDE (0.71 mg/L) and CP (2.67 mg/L). Moreover, TSO from SBE had relatively high tocopherols (26.20 mg/100 g) and phytosterols (842.25 mg/100 g) contents. Based on these findings, SBE is a promising method for obtaining high-quality TSO enriched with tocopherols and phytosterols.

Enhancing waste sludge solubilization through radio frequency treatment perforating bacterial cells

Sludge solubilization is known as a rate-limiting step of anaerobic digestion. Although radio frequency (RF) has been applied for sludge pretreatment due to its similar thermal effect as microwave, the potential non-thermal effects of RF treatment remain controversial. In this study, we demonstrate that RF pretreatment enhances the solubilization and lysis of sludge by 8.02%-19.69% through both thermal and non-thermal mechanisms with less energy input. Scanning electron microscope images provide direct evidence that RF-induced microcurrents penetrated bacterial cells, leading to the release of intracellular substances through formed pores. Additionally, the non-thermal effect of RF treatment which could weaken the cell protection and accelerate the lysis rate involves the disruption of binding forces between extracellular polymeric substances and microbial cells. On average, the utilization of RF at a frequency of 27.12 MHz demonstrates its efficacy as a sludge pretreatment technique, as evidenced by a 13.39% reduction in energy consumption and a 16.9% improvement in treatment performance compared to conductive heating (CH). The findings of this study elucidate the possible mechanism of RF treatment of sludge and could establish a theoretical basis for the practical application of RF treatment in sludge management.

The current state of knowledge about thermal processing of edible seeds; a special emphasis on their bioactive constituents and antioxidant activity

Thermal processing can alter the biological activity of seed phytochemicals in various ways, thus improving shelf life, bioavailability, oxidative stability, and oil yield; it can also decrease the content of antinutritional compounds, reduce cytotoxic activity and increase the total phenolic content of the seeds. However, this treatment can also inactivate beneficial compounds, including phenolics. This review describes the effect of different thermal processing methods on the content, activity, and bioavailability of chemical compounds from different edible seeds. The outcome is dependent on the method, temperature, time of processing, and type of seeds. Although thermal processing has many benefits, its precise effect on different species requires further clarification to determine how it influences their phytochemical content and biological activity, and identify the optimal conditions for processing.

Comparative phytochemical, antioxidant, and hemostatic studies of fractions from raw and roasted sea buckthorn seeds in vitro

Various seeds, including sea buckthorn (Hippophae rhamnoides L.) seeds, are sources of different bioactive compounds. They can show anti-inflammatory, hypoglycemic, anti-hyperlipidemic, antibacterial, antioxidant, or other biological properties in in vitro and in vivo models. Our preliminary in vitro results have demonstrated that the extracts from raw (no thermal processing) and roasted (thermally processed) sea buckthorn seeds have antioxidant potential and anticoagulant activity. However, it was unclear which compounds were responsible for these properties. Therefore, in continuation of our previous study, the extracts were fractionated by C18 chromatography. Phytochemical analysis of three fractions (a, b, and c) from raw sea buckthorn seeds and four fractions (d, e, f, and g) from roasted sea buckthorn seeds were performed. Several in vitro assays were also conducted to determine the antioxidant and procoagulant/anticoagulant potential of the fractions and two of their major constituents-isorhamnetin 3-O-β-glucoside7-O-α-rhamnoside and serotonin. LC-MS analyses showed that serotonin is the dominant constituent of fractions c and f, which was tentatively identified on the basis of its HRMS and UV spectra. Moreover, fractions c and f, as well as b and e, contained different B-type proanthocyanidins. Fractions b and e consisted mainly of numerous glycosides of kaempferol, quercetin, and isorhamnetin. The results of oxidative stress assays (measurements of protein carbonylation, lipid peroxidation, and thiol groups oxidation) showed that out of all the tested fractions, fraction g (isolated from roasted seeds and containing mainly dihexoses, and serotonin) demonstrated the strongest antioxidant properties.

Comparison evaluation pretreatments on the quality characteristics, oxidative stability, and volatile flavor of walnut oil

In this study, we applied various thermal pretreatment methods (e.g., hot-air, microwave, and stir-frying) to process walnut kernels, and conducted comparative analysis of the physicochemical properties, nutritional components, in vitro antioxidant activity, and flavor substances of the extracted walnut oil (WO). The results indicated that, thermal pretreatment significantly increased the extraction of total trace nutrients (e.g., total phenols, tocopherols, and phytosterols) in WO. The WO produced using microwave had 2316.71 mg/kg of total trace nutrients, closely followed by the stir-frying method, which yielded an 11.22% increase compared to the untreated method. The WO obtained by the microwave method had a higher Oxidative inductance period (4.05 h) and oil yield (2.48%). After analyzing the flavor in WO, we found that aldehydes accounted for 28.77% of the 73 of volatile compounds and 58.12% of the total flavor compound content in microwave-pretreated WO, these percentages were higher than those recorded by using other methods. Based on the comprehensive score obtained by the PCA, microwave-pretreatment might be a promising strategy to improve the quality of WO based on aromatic characteristics.

Effect of radio frequency roasting on the lipid profile of peanut oil and the mechanism of lipids transformation: Revealed by untargeted lipidomics approach

Radio frequency (RF) heating has been proved an alternative roasting method for peanuts, which could effectively degrade aflatoxins and possesses the advantages of greater heating efficiency and penetration depth. This study aimed to investigate the influences of RF roasting on the lipid profile of peanut oil under 150 °C target temperature with varied peanut moisture contents (8.29 % and 20 %) and holding times (0, 7.5, and 15 min), using ultra-performance liquid chromatography-quadrupole time-of-flight tandem mass spectrometry (UPLC-QTOF-MS/MS)-based lipidomics. In total, 2587 lipid species from 35 subclasses were identified. After roasting, the contents of sterol lipid (ST) and subclasses of glycerophospholipids (GPs) and glycoglycerolipids increased significantly, while fatty acid (FA), Oxidized (Ox-) FA, cholesterol (CE), and all subclasses of glycerolipids (GLs) decreased, and 1084 differential lipids were screened. The highest ST and lowest CE contents in peanut oil were achieved by medium roasting (7.5 min). The raise in moisture content of peanut simply affected a few GPs subclasses adversely. Compared with hot air (HA) roasting, RF decelerated lipid oxidation, showing higher levels of diacylglycerol, triacylglycerol and FA, with no additional negative impact and only 69 exclusive differential lipids. During RF roasting, hydrolysis and oxidation of fatty acyl chains into secondary oxides were the central behaviors of lipids transformation. This study could provide insights into the lipid changes and transformation mechanism of peanut oil by RF roasting processing.

Nutritional composition, health-promoting effects, bioavailability, and encapsulation of tree peony seed oil: a review

Tree peony is cultivated worldwide in large quantities due to its exceptional ornamental and medicinal value. In recent years, the edible value of tree peony seed oil (TPSO) has garnered significant attention for its high content of alpha-linolenic acid (ALA, >40%) and other beneficial minor components, including phytosterols, tocopherols, squalene, and phenolics. This review provides a systematic summary of the nutritional composition and health-promoting effects of TPSO, with a specific focus on its digestion, absorption, bioavailability, and encapsulation status. Additionally, information on techniques for extracting and identifying adulteration of TPSO, as well as its commercial applications and regulated policies, is included. Thanks to its unique nutrients, TPSO offers a wide range of health benefits, such as hypolipidemic, anti-obesity, cholesterol-lowering, antioxidant and hypoglycemic activities, and regulation of the intestinal microbiota. Consequently, TPSO shows promising potential in the food and cosmetic industries and should be cultivated in more countries. However, the application of TPSO is hindered by its low bioavailability, poor stability, and limited water dispersibility. Therefore, it is crucial to develop effective delivery strategies, such as microencapsulation and emulsion, to overcome these limitations. In conclusion, this review provides a comprehensive understanding of the nutritional value of TPSO and emphasizes the need for further research on its nutrition and product development.

Quality Evaluation of Walnuts from Different Regions in China

This study analyzed and evaluated the basic crude fat contents, crude protein contents, phenolic compounds, lipid compositions (fatty acids, phytosterols, and tocopherols), and amino acid compositions of 26 walnut samples from 11 walnut-growing provinces in China. The results indicate that the oil contents of the samples varied from 60.08% to 71.06%, and their protein contents ranged from 7.26 g/100 g to 19.50 g/100 g. The composition of fatty acids corresponded to palmitic acid at 4.61-8.27%, stearic acid at 1.90-3.55%, oleic acid at 15.50-32.28%, linoleic acid at 53.44-67.64%, and α-linolenic acid at 2.45-12.77%. The samples provided micronutrients in widely varying amounts, including tocopherol, phytosterol, and total phenolic content, which were found in the walnut oil samples in amounts ranging from 356.49 to 930.43 mg/kg, from 1248.61 to 2155.24 mg/kg, and from 15.85 to 68.51 mg/kg, respectively. A comprehensive evaluation of walnut oil quality in the samples from the 11 provinces using a principal component analysis was conducted. The findings revealed that the samples from Henan, Gansu, and Zhejiang had the highest composite scores among all provinces. Overall, Yunnan-produced walnuts had high levels of crude fat, polyunsaturated fatty acids, and total tocopherols, making them more suitable for producing high-quality oil, whereas Henan-produced walnuts, although lower in crude fat, had a higher crude protein content and composite score, thus showing the best walnut characteristics.

Effect of Adsorption Deacidification on the Quality of Peony Seed Oil

To overcome the issues in the traditional deacidification processes of peony seed oil (PSO), such as losses of neutral oil and trace nutrients, waste discharge, and high energy consumption, adsorption deacidification was developed. The acid removal capacity of adsorbent-alkali microcrystalline cellulose was evaluated using the isothermal adsorption equilibrium and the pseudo-first-order rate equation. The optimized adsorption deacidification conditions included adsorbent-alkali microcrystalline cellulose at 3%, a heating temperature of 50 °C, and a holding time of 60 min. The physicochemical, bioactive properties, antioxidant capacities, and oxidative stabilities of PSO processed by alkali refining and oil-hexane miscella deacidification were compared under the same operating conditions. Fatty acid content was not significantly different across all three methods. The deacidification rates were 88.29%, 98.11%, and 97.76%, respectively, for adsorption deacidification, alkali refining, and oil-hexane miscella deacidification. Among the three deacidification samples, adsorption deacidification showed the highest retention of tocopherols (92.66%), phytosterols (91.96%), and polyphenols (70.64%). Additionally, the obtained extract preserved about 67.32% of the total antioxidant activity. The oil stability index was increased 1.35 times by adsorption deacidification. Overall, adsorption deacidification can be considered a promising extraction technology in terms of quality as compared to alkali refining and oil-hexane miscella deacidification.

Insights into flavor and key influencing factors of Maillard reaction products: A recent update

During food processing, especially heating, the flavor and color of food change to a great extent due to Maillard reaction (MR). MR is a natural process for improving the flavor in various model systems and food products. Maillard reaction Products (MRPs) serve as ideal materials for the production of diverse flavors, which ultimately improve the flavor or reduce the odor of raw materials. Due to the complexity of the reaction, MR is affected by various factors, such as protein source, hydrolysis conditions, polypeptide molecular weight, temperature, and pH. In the recent years, much emphasis is given on conditional MR that could be used in producing of flavor-enhancing peptides and other compounds to increase the consumer preference and acceptability of processed foods. Recent reviews have highlighted the effects of MR on the functional and biological properties, without elaborating the flavor compounds obtained by the MR. In this review, we have mainly introduced the Maillard reaction-derived flavors (MF), the main substances producing MF, and detection methods. Subsequently, the main factors influencing MF, from the selection of materials (sugar sources, protein sources, enzymatic hydrolysis methods, molecular weights of peptides) to the reaction conditions (temperature, pH), are also described. In addition, the existing adverse effects of MR on the biological properties of protein are also pointed out.

Comprehensive evaluation of chemical composition and health-promoting effects with chemometrics analysis of plant derived edible oils

•

22 edible oils can be discriminated based on tocopherol and phytosterol contents.

•

In vitro antioxidant activity is correlated to polyphenol, tocopherol, and squalene.

•

Oxidative and heat stress resistance is correlated to tocopherol and phytosterol.

•

In vivo antioxidant activity is correlated to polyphenol, squalene, MUFA and PUFA.

In the last decade, with a growing emphasis on healthy diets, functional edible oils with high nutritional quality are becoming increasingly popular around the world. This study systematically compared the chemical composition and protective effect of 22 vegetable oils using multivariate chemometric tools. The results showed that the fatty acid composition and minor compounds were extremely variable among tested oils. Hierarchical cluster and principal component analysis discriminated these oils according to the tocopherol and phytosterol contents. The Pearson’s correlation analysis indicated that in vitro radical scavenging capacity was significantly correlated to polyphenol, tocopherol, and squalene. Additionally, the ameliorate effects on the heat and oxidative stress, ROS contents, and antioxidant enzyme activities were measured in Caenorhabditis elegans. The results showed that the antioxidant activity and stress resistance were positively correlated to polyphenol, tocopherol, phytosterol, MUFA, and PUFA, respectively. This study may offer an insight into oil discrimination and functional oil exploitation.