Volatile Compounds in Pulses: A Review

Macronutrient balance determines the human gut microbiome eubiosis: insights from in vitro gastrointestinal digestion and fermentation of eight pulse species

The interactions between macronutrients, the human gut microbiome, and their metabolites (short-chain fatty acids) were comprehensively investigated via an in vitro digestion and fermentation model subjected to eight pulse species. 16S rRNA sequencing and taxonomic analysis of pulse digesta fermented for up to 24 h revealed an increase in the relative abundance of gut health-detrimental genera represented by Escherichia-Shigella in kidney bean, soybean, cowpea, chickpea, and black bean samples. In contrast, the relative abundance of health-positive genera, including Bacteroides, Eubacterium, and Akkermansia, was elevated in red bean, mung bean, and Heunguseul. At the same time, the proportion of the pathogenic Escherichia-Shigella decreased. Concurrently, these three species exhibited an increase in microbial diversity as evidenced by the calculation of α-diversity (Shannon index) and β-diversity (Bray-Curtis distance). Despite the lower nutrient contents in the three pulses, represented by carbohydrates, amino acids, and fatty acids, network analysis revealed that the nutrient contents in the pulse digesta possess complex positive or negative correlations with a variety of bacteria, as well as their metabolites. These correlations were more pronounced in red bean, mung bean, and Heunguseul than in the other pulses. It was postulated that the overall potential to nourish gut environments in these species was due to the balance of their nutritional components. The linear regression analysis demonstrated that there was a negative association between carbohydrate and amino acid contents and the increase in Shannon indices. Furthermore, the ratio of carbohydrates to fatty acids and amino acids to fatty acids displayed negative correlations with the diversity increase. The ratio of carbohydrates to amino acids showed a weak positive correlation. It is noteworthy that a diet comprising foods with a balanced nutritional profile supports the growth of beneficial gut microbes, thereby promoting microbial eubiosis. Consistent work on different ingredients is essential for precise insight into the interplay between food and the human microbiome in complex dietary patterns.

Effects of Different Types and Ratios of Dry Tea Residues on Nutrient Content, In Vitro Rumen Fermentation, and the Bacterial Community of Ensiled Sweet Sorghum

Dry tea residue is a byproduct generated during the production, processing, and storage of tea leaves. The active ingredients and microbial composition of dried tea residue vary depending on different tea processing techniques. This study investigated the effects of six processed dry tea residues-green tea (G), black tea (B), raw Pu'er tea (Z), white tea (W), and ripe Pu'er tea (D)-at two addition ratios (5% and 10%) on the nutritional composition, fermentation quality, in vitro fermentation, and bacterial community of sweet sorghum (Sorghum bicolor) in the ensiling process. Compared to the control group (CK), the addition of tea residue significantly increased the crude protein (CP) content in silage by 17.9% to 180% (p < 0.05), and the content increased with increasing ratios of tea residue. The G10 treatment resulted in the highest CP content, reaching 16.4%. Including tea residue also influenced the ratio of ammonia nitrogen (NH3-N) to non-protein nitrogen (NPN). Furthermore, the G and Z treatments at both addition levels increased the total phenolic content, DPPH free-radical scavenging activity, and total antioxidant capacity of the sweet sorghum silage. Except for the Z5 and W10 treatments, the addition of tea residue did not significantly affect in vitro dry matter digestibility. Overall, this study showed that incorporating tea residue could enhance the nutritional quality and antioxidant capacity of sweet sorghum silage, and the G5 treatment performed the best. The research results suggested that dried tea residues have potential as silage additives.

Potential of volatile organic compounds in the management of insect pests and diseases of food legumes: a comprehensive review

Cool season legumes (Faba bean, chickpea, lentil, pea, and grass pea) are important protein harvests for food and nutrition security in many countries. They play key roles in sustainable cereal production through their ecological benefits. However, diseases and pests attack continue to have a substantial impact on crop yield and quality. Although growers used different control options to manage these biotic stresses such as pesticide application, cultural practices, and resistant varieties, there is a pressing need for the development of new, more cost-effective and environmentally friendly solution to help farmers in facing the existing environmental issues. Recently, there is a growing interest among researchers in exploiting Volatile Organic Compounds (VOCs) for the elaboration of disease and pest control strategies in food legumes and other crops. These compounds have important functions in ecological relationships occurring between plants and their surrounding environment, as well as plants and others species, such as pests and pathogens. Due to their unique properties, VOCs can be employed in improving management alternatives for food legume diseases and pests. In this assessment, we investigated the role of VOCs in plant-pest and plant-pathogen interactions and their present applications in pest and diseases control strategies. We emphasized the ecological importance of employing plant VOCs in legume farming and crop breeding. Additionally, we highlighted the potential of microbial VOCs in facilitating microbe-microbe, microbe-plant and microbe-plant-pest interactions, along with their role in food legume protection.

Identification of volatile and odor-active compounds in pea protein fractions obtained by a modified extraction method using fermentation

This study investigates the aromatic composition of pea albumin and globulin fractions obtained through either fermentation or conventional acidification using hydrochloric acid (control) toward the isoelectric point of pea globulins. Different lactic acid bacteria were used including S. thermophilus (ST), L. plantarum (LP), and their coculture (STLP). The volatile compounds were extracted by solvent-assisted flavor evaporation technique and quantified by gas chromatography-mass spectrometry (GC-MS). Odor-active compounds (OAC) were further characterized by gas chromatography-olfactometry (GC-O). In total, 96 volatile and 36 OACs were identified by GC-MS and GC-O, respectively. The results indicated that the protein fractions obtained by conventional acidification were mainly described by green notes for the presence of different volatile compounds such as hexanal. However, the samples obtained by fermentation had a lower content of these volatile compounds. Moreover, protein fractions obtained by coculture fermentation were described by volatile compounds associated with fruity, floral, and lactic notes. PRACTICAL APPLICATION: The insights from this study on pea protein aroma could find practical use in the food industry to enhance the sensory qualities of plant-based products. By utilizing fermentation methods and specific lactic acid bacteria combinations, manufacturers may produce pea protein with reduced undesirable green notes, offering consumers food options with improved flavors. This research may contribute to the development of plant-based foods that not only provide nutritional benefits but also meet consumer preferences for a more appealing taste profile.

Effect of the Drying Method and Storage Conditions on the Quality and Content of Selected Bioactive Compounds of Green Legume Vegetables

This study aimed to determine the effect of the drying method (freeze-drying, air-drying), storage period (12 months), and storage conditions (2-4 °C, 18-22 °C) applied to two legume species: green beans and green peas. The raw and dried materials were determined for selected physical parameters typical of dried vegetables, contents of bioactive components (vitamin C and E, total chlorophyll, total carotenoids, β-carotene, and total polyphenols), antioxidative activity against the DPPH radical, and sensory attributes (overall quality and profiles of color, texture, and palatability). Green beans had a significantly higher content of bioactive components compared to peas. Freeze-drying and cold storage conditions facilitated better retention of these compounds, i.e., by 9-39% and 3-11%, respectively. After 12 months of storage, higher retention of bioactive components, except for total chlorophyll, was determined in peas regardless of the drying method, i.e., by 38-75% in the freeze-dried product and 30-77% in the air-dried product, compared to the raw material.

Effects of germination time on the structure, functionality, flavour attributes, and in vitro digestibility of green Altamura lentils (Lens culinaris Medik.) flour

There has been an increase in the use of adoptable bioprocessing methods for the development of high-quality leguminous ingredients. The potential use of germinated green Altamura lentils as a food ingredient is closely related to the resulting properties. The objective of this study was to evaluate the impact of three germination times - 0 (C), 24 (G) and 48 (H) hours - on the physicochemical, microstructural, flavour, functional, and nutritional features of lentil flour samples (CF, GF and HF). Lentil flour samples were obtained by grinding both whole green seeds (C) and germinated seeds (G and H), and then sifting them to obtain a particle size < 300 μm. The germinated samples - GF (24 h) and HF (48 h) - exhibited differences (P < 0.05) in the physicochemical and bioactive properties of CF (control). Similarly, compared with those in the control sample, the total starch, amylose and total phenolic contents in the GF and HF samples decreased, while the protein content increased (p < 0.05). A decrease in the presence of intact starch granules was observed via SEM in the germinated samples. The germination time had a significant (P < 0.05) effect on the colour indices, L*, a*, and b* of the samples. Flavour attributes were significantly influenced by the germination time. Overall, a total of 14 (CF) and 17 (GF and HF) aromatic compounds were identified. The technological characteristics of the CF, GF and HF dough samples were studied using a Brabender farinograph. Germination time affects the flour properties, leading to a significant decrease in farinographic parameters such as water absorption (WA), dough development time (DT), and dough stability (DS) and an increase in the degree of dough weakening (DOS). Differential scanning calorimetry was employed to examine the gelatinization transition of the samples. Germination strongly influenced all the thermal properties of the samples. It also had a significant impact on the in vitro starch digestibility, starch fraction and glycaemic index (eGI) of the samples. In particular, the eGI of germinated lentils was lower than that of the CF. In conclusion, the germination time could be a key factor modulating some crucial lentil flour properties.

Conjugation of gum Arabic and lentil protein hydrolysates through Maillard reaction: Antioxidant activity, volatile compounds, functional and sensory properties

Lentil protein hydrolysates (LPH) and lentil protein hydrolysates cross-linked (LPHC) were grafted with gum Arabic (GA) through a wet Maillard reaction at 100°C for 2 h and called MLPH and MLPHC. The samples were assessed for absorption, degree of grafting (DG), surface hydrophobicity, antioxidant activity, molecular weight (MW) profile, chemical alteration, volatile compounds, functional and sensory properties. Results showed that Maillard grafting led to increase in absorption and DG (maximum value: MLPHC), and led to the reduction of the surface hydrophobicity and antioxidant activity (minimum value: MLPHC). MW profiles indicated that MLPH and MLPHC formed new bands at MW >250 kDa. Regarding the Fourier transform infrared spectroscopy (FTIR), Maillard conjugation led to the occurrence of peaks at 1759 and 1765 cm-1, while the intensities of amide I bands at 1637 and 1659 cm-1 and amide II bands at 1498 and 1495 cm-1 were decreased. Hydrolysis, cross-linking, and especially Maillard grafting provided well-balanced content of volatile components. Indeed, the proportions of alcohols, ketones, aldehydes, and acids were changed, thereby, the inherent grassy and planty tastes were diminished while new umami taste was developed. Maillard grafting led to significant improvement of functional properties, while MLPH and MLPHC indicated the highest emulsifying activity at pH 10.0 (73.76 and 70.12 m2/g, respectively) and stability (369.64 and 288.22 min), foaming capacity (88.57% and 142.86%) and stability (60.57% and 72%). Sensory analysis has demonstrated that umami taste was highly developed in MLPH and MLPHC, which can be well considered as meat proteins and flavor enhancers such as monosodium glutamate (MSG).

Identification of key aroma compounds of faba beans (Vicia faba) and their development during germination - a SENSOMICS approach

Faba beans are a promising source of valuable plant protein. However, their aroma impression is often a hindrance for the use in a broad range of food products. To develop mitigation strategies, a deeper insight into the faba bean aroma is required. Therefore, for the first time, the SENSOMICS concept was applied. First, 52 aroma active compounds in raw and malted faba beans were identified and semi-quantitatively preselected by aroma extract dilution analysis. Afterwards, the aroma compounds were quantified, odor activity values were calculated, and the 17 prominent odors were selected and used in the reconstitution of the faba bean aroma. Seven statistically significant key aroma compounds 3-methylbutanoic acid, (E)-non-2-enal, hexanal, methional, 3-methylbutanal, sotolon, and 2-methylbutan-1-ol were identified in omission experiments. Finally, their development upon malting was studied. To conclude, by knowing the key aroma compounds, specific mitigation strategies can be developed, which facilitates the broader use of faba beans.

Nutrient Levels, Bioactive Metabolite Contents, and Antioxidant Capacities of Faba Beans as Affected by Dehulling

Legume dehulling often removes anti-nutrients while improving nutritional quality. However, the process may reduce the levels of other health-promoting metabolites. This study investigated the effect of dehulling on major nutrients, bioactive metabolites, and antioxidant activities using 22 faba bean cultivars typically grown in different parts of the world. The faba bean cultivars differed significantly in all the parameters assessed. Crude fiber (CFC), dietary fiber (DFC), crude protein, and crude fat contents were in the ranges of 5.24-10.56, 16.17-25.15, 19.83-30.90, and 0.79-1.94% in the whole seeds and 0.96-1.59, 4.14-9.50, 22.47-36.61, and 1.13-2.07% in the dehulled seeds, respectively. Moreover, fatty acids including palmitic acid, stearic acid, oleic acid, linoleic acid, and linolenic acid, bioactive metabolites including total phenol (TPC), total saponin (TSC), and total tannin (TTC) contents, and antioxidant activities including ABTS•+-scavenging activity, ferric antioxidant power (FRAP), and DPPH•-scavenging activity also showed significant variations. Dehulling significantly reduced DFC (55.09-79.30%), CFC (69.61-87.52%), and TTC (1.70-66.99%) in all the faba bean cultivars while increasing total protein content (9.31-17.69%). Dehulling also increased the total fat content (3.02-48.13%) in all the cultivars except Giant Three Seeded, a Japanese cultivar, which showed a 12.62% decrease. In contrast, dehulling exhibited varying results on fatty acids, TPC, TSC, and antioxidant activities among the faba bean cultivars. Accordingly, three cultivars: Primus from Hungary, Levens Marschbohne from Germany, and Ascott from France, exhibited simultaneous increases in nutritional levels after dehulling. Domasna-2 from Macedonia, Abawi# 1 from Peru, Seville from the United Kingdom, and Large Mazandran from Iran, on the other hand, exhibited marked reductions in nutritional levels, functional metabolites, and antioxidant activities. In general, our findings indicated that dehulling reduces crude fiber, dietary fiber, and tannin levels while increasing protein and fat contents in faba beans. However, fatty acids, phenolic content, and antioxidant activity may not be equally affected by dehulling and, therefore, specific genotypes should be inspected.

Application of state diagrams to understand the nature and kinetics of (bio)chemical reactions in dry common bean seeds: A scientific guide to establish suitable postharvest storage conditions

Storage is a fundamental part of the common bean postharvest chain that ensures a steady supply of safe and nutritious beans of acceptable cooking quality to the consumers. Although it is known that extrinsic factors of temperature and relative humidity (influencing the bean moisture content) control the cooking quality deterioration of beans during storage, the precise interactions among these extrinsic factors and the physical state of the bean matrix in influencing the rate of quality deteriorative reactions is poorly understood. Understanding the types and kinetics of (bio)chemical reactions that influence the cooking quality of beans during storage is important in establishing suitable storage conditions to ensure quality stability. In this review, we integrate the current insights on glass transition phenomena and its significance in describing the kinetics of (bio)chemical reactions that influence the cooking quality changes during storage of common beans. Furthermore, a storage stability map based on the glass transition temperature of beans as well as kinetics of the main (bio)chemical reactions linked to cooking quality deterioration during storage was designed as a guide for determining appropriate storage conditions to ensure cooking quality stability.

The challenge of breeding for reduced off-flavor in faba bean ingredients

The growing interest in plant protein sources, such as pulses, is driven by the necessity for sustainable food production and climate change mitigation strategies. Faba bean (Vicia faba L.) is a promising protein crop for temperate climates, owing to its remarkable yield potential (up to 8 tonnes ha-1 in favourable growing conditions) and high protein content (~29% dry matter basis). Nevertheless, the adoption of faba bean protein in plant-based products that aim to resemble animal-derived counterparts is hindered by its distinctive taste and aroma, regarded as "off-flavors". In this review, we propose to introduce off-flavor as a trait in breeding programs by identifying molecules involved in sensory perception and defining key breeding targets. We discuss the role of lipid oxidation in producing volatile and non-volatile compounds responsible for the beany aroma and bitter taste, respectively. We further investigate the contribution of saponin, tannin, and other polyphenols to bitterness and astringency. To develop faba bean varieties with diminished off-flavors, we suggest targeting genes to reduce lipid oxidation, such as lipoxygenases (lox) and fatty acid desaturases (fad), and genes involved in phenylpropanoid and saponin biosynthesis, such as zero-tannin (zt), chalcone isomerase (chi), chalcone synthase (chs), β-amyrin (bas1). Additionally, we address potential challenges, including the need for high-throughput phenotyping and possible limitations that could arise during the genetic improvement process. The breeding approach can facilitate the use of faba bean protein in plant-based food such as meat and dairy analogues more extensively, fostering a transition toward more sustainable and climate-resilient diets.

Malting-A method for modifying volatile composition of black, brown and green lentil seeds

Technique of malting legume seeds is not currently widespread among scientists as well as industrial maltsters. However, this method of seed modification is successfully used by humankind for millennia to improve technological parameters, as well as change taste and aroma of various food products. Three lentil cultivars (black, brown and green) were malted (steeped, germinated for three various time periods and then kilned) to produce nine lentil malts. Malting had significant influence on the volatile composition of lentil seeds. Total concentration of volatiles in the green lentils increased and decreased in the case of black and brown lentils after malting procedure. However, most importantly, in every lentil cultivar the contribution of various groups of compounds (such as aldehydes, alcohols, terpenes or ketones) to the overall volatilome was changed due to the malting procedure.

Activation of bitter taste receptors by saponins and alkaloids identified in faba beans (Vicia faba L. minor)

Despite their interests, faba beans are characterised by bitterness but little is known about its compounds that activate the 25 human bitter receptors (TAS2Rs). This study aimed to determine the bitter molecules in faba beans, especially saponins and alkaloids. These molecules were quantified by UHPLC-HRMS in flour, starch and protein fractions of 3 faba bean cultivars. The fractions from the low-alkaloid cultivar and the protein fractions exhibited higher saponin content. Vicine and convicine were highly correlated with bitter perception. The bitterness of soyasaponin βb and alkaloids was studied using a cellular approach. Soyasaponin βb activated 11 TAS2Rs, including TAS2R42 whereas vicine activated only TAS2R16. The high vicine content should explain the faba bean bitterness considering that concentration of soyasaponin βb was low. This research provides a better understanding of the bitter molecules in faba beans. Selection of low-alkaloid ingredients or alkaloid removal treatments could improve the faba bean flavour.

Mushroom-Legume-Based Minced Meat: Physico-Chemical and Sensory Properties

A growing number of health-conscious consumers are looking for animal protein alternatives with similar texture, appearance, and flavor. However, research and development still needs to find alternative non-meat materials. The aim of this study was to develop a mushroom-based minced meat substitute (MMMS) from edible Pleurotus sajor-caju (PSC) mushrooms and optimize the concentration of chickpea flour (CF), beetroot extract, and canola oil. CF was used to improve the textural properties of the MMMS by mixing it with PSC mushrooms in ratios of 0:50, 12.5:37.5, 25:25, 37.5:12.5, and 50:0. Textural and sensory attributes suggest that PSC mushrooms to CF in a ratio of 37.5:12.5 had better textural properties, showing hardness of 2610 N and higher consumer acceptability with protein content up to 47%. Sensory analysis suggests that 5% (w/w) canola oil showed the most acceptable consumer acceptability compared to other concentrations. Color parameters indicate that 0.2% beetroot extract shows higher whiteness, less redness, and higher yellowness for both fresh and cooked MMMS. This research suggests that MMMS containing PSC, CF, canola oil, and beetroot extract could be a suitable alternative and sustainable food product which may lead to higher consumer adoption as a meat substitute.

Effects of the use of raw or cooked chickpeas and the sausage cooking time on the quality of a lamb-meat, olive-oil emulsion-type sausage

Reformulation of cooked sausages using high-protein plant-based food such as chickpea as meat extenders and vegetable oils to replace animal fat can be a suitable approach to promote the consumption of smaller portions of meat. The pre-processing of chickpea and the sausage cooking intensity can potentially affect the quality of reformulated sausages. In this study, an emulsion-type sausage made with lamb meat, chickpea and olive oil was prepared in triplicate following three different formulations containing the same targeted levels of protein (8.9%), lipids (21.5%), and starch (2.9%): control sausage (CON; control, without chickpea), and raw (RCP) and cooked chickpea (CCP) sausages (both with 7% chickpea). Sausages were cooked at 85 °C for two heating times (40 min or 80 min) and were analysed for weight loss, emulsion stability, colour, texture, lipid oxidation and volatile composition. Compared to CON sausages, the use of raw chickpea reduced the elasticity and significantly increased lipid oxidation during the sausage-making process resulting in major changes in the volatile composition. The use of previously cooked chickpea, however, resulted in the sausages having greater cooking loss, hardness and chewiness than CON sausages, while there was no difference in lipid oxidation, and differences in volatile compounds were scarce. The reformulation with cooked chickpea could provide a sausage with more similarity to the CON sausage. The extended heating time of 80 min at 85 °C did not significantly affect the quality traits in either CON or reformulated sausages except for a higher cooking loss.

Unravelling dynamic changes in non-volatile and volatile metabolites of pulses during soaking: An integrated metabolomics approach

An integrated metabolomics approach based on UPLC-QTOF-MS and HS-SPME-GC-orbitrap-MS was performed to investigate the dynamic changes of metabolite profiling in chickpeas, red speckled kidney beans, and mung beans during soaking. There were 23, 23, 16 non-volatile metabolites, and 18, 21, 22 volatile metabolites were identified as differential metabolites in chickpeas, red speckled kidney beans, and mung beans during soaking, respectively. These metabolites mainly included flavonoids, lysophosphatidylcholines (LPCs), lysophosphatidylethanolamines (LPEs), fatty acids, alcohols, aldehydes, and esters. The key time points responsible for the significant changes in metabolites and quality of the three pulses were 4, 8, and 24 h of soaking. Results revealed that the variations of some metabolites could attribute to oxidation and hydrolysis reactions. These results contribute to a better understanding of how soaking affects pulses quality, and provide useful information for determining soaking time according to nutritional and sensory requirements of their final products or dishes.

Non-Volatile Compounds Involved in Bitterness and Astringency of Pulses: A Review

Despite the many advantages of pulses, they are characterised by off-flavours that limit their consumption. Off-notes, bitterness and astringency contribute to negative perceptions of pulses. Several hypotheses have assumed that non-volatile compounds, including saponins, phenolic compounds, and alkaloids, are responsible for pulse bitterness and astringency. This review aims to provide an overview highlighting the non-volatile compounds identified in pulses and their bitter and/or astringent characteristics to suggest their potential involvement in pulse off-flavours. Sensorial analyses are mainly used to describe the bitterness and astringency of molecules. However, in vitro cellular assays have shown the activation of bitter taste receptors by many phenolic compounds, suggesting their potential involvement in pulse bitterness. A better knowledge of the non-volatile compounds involved in the off-flavours should enable the creation of efficient strategies to limit their impact on overall perception and increase consumer acceptability.

Comparison of sensitivity to taste and astringency stimuli among vegans and omnivores

Taste perception plays a crucial role in determining food choices. It has been described in literature a relationship between diet composition and taste perception. Nowadays, with the rising concern in climate change and animal welfare, the number of people following a vegan diet is increasing to become a real trend. Research about differences in taste perception between vegan and omnivore is lacking. The aim of the study was to compare detection threshold for bitter, sour, umami and astringency stimuli (quinine monohydrochloride dihydrate, citric acid anhydrous, monosodium glutamate and tannic acid, respectively) participants following a vegan diet (n=24) and participants following an omnivore diet (n=30). Participants reported their consumption frequency for main food categories. The mean detection thresholds between the two groups narrowly missed significance with p-values of 0.07, 0.08, 0.06, for bitter, umami and astringency perception, respectively. No differences were found for sour taste (p-value=0.33). Further research is required to validate such findings and to understand the origin of the relationship between diet style and taste sensitivity.

Bread Products from Blends of African Climate Resilient Crops: Baking Quality, Sensory Profile and Consumers' Perception

With food insecurity rising dramatically in Sub-Saharan Africa, promoting the use of sorghum, cowpea and cassava flours in staple food such as bread may reduce wheat imports and stimulate the local economy through new value chains. However, studies addressing the technological functionality of blends of these crops and the sensory properties of the obtained breads are scarce. In this study, cowpea varieties (i.e., Glenda and Bechuana), dry-heating of cowpea flour and cowpea to sorghum ratio were studied for their effects on the physical and sensory properties of breads made from flour blends. Increasing cowpea Glenda flour addition from 9 to 27% (in place of sorghum) significantly improved bread specific volume and crumb texture in terms of instrumental hardness and cohesiveness. These improvements were explained by higher water binding, starch gelatinization temperatures and starch granule integrity during pasting of cowpea compared to sorghum and cassava. Differences in physicochemical properties among cowpea flours did not significantly affect bread properties and texture sensory attributes. However, cowpea variety and dry-heating significantly affected flavour attributes (i.e., beany, yeasty and ryebread). Consumer tests indicated that composite breads could be significantly distinguished for most of the sensory attributes compared to commercial wholemeal wheat bread. Nevertheless, the majority of consumers scored the composite breads from neutral to positive with regard to liking. Using these composite doughs, chapati were produced in Uganda by street vendors and tin breads by local bakeries, demonstrating the practical relevance of the study and the potential impact for the local situation. Overall, this study shows that sorghum, cowpea and cassava flour blends can be used for commercial bread-type applications instead of wheat in Sub-Saharan Africa.

Origins of volatile compounds and identification of odour-active compounds in air-classified fractions of faba bean (Vicia faba L. minor)

Faba bean (Vicia faba L. minor) has many interests but is characterised by off-notes (negative odours/aromas) due to volatile compounds that are promoted during seed processing. Little is known about the volatile compounds of faba bean and their contribution to its odour. The purpose of this study was to determine the volatile compound origins of air-classified fractions (flour (F), starch (S) and protein (P)) from 3 faba bean cultivars and identify the odour-active compounds. Firstly, the volatile content of the fractions was extracted by solvent-assisted flavour evaporation (SAFE) and analysed by gas chromatography-mass spectrometry (GC-MS). A total of 147 volatile compounds were detected and categorised into 12 chemical classes. The P fractions had many volatile compounds from free fatty acid (FFA) oxidation and a higher lipoxygenase (LOX) activity. The volatile content suggested that cultivar 1 (C1) was confronted with a biotic stress at field whereas cultivar 2 (C2), richer in molecules from amino acid (AA) degradation, was contaminated by microorganisms in the field. Secondly, 35 odour-active compounds (OACs) were identified by GC-olfactometry (GC-O) and 12 odour-classes were used to describe the faba bean odours. The P fractions had higher detection frequency (DF) than the S and F fractions. P2 had a more complex odour profile due to important FFA and AA degradation. This work provides a better understanding of the impact of cultivar and processing steps on the faba bean volatile content. Selection of pulse-based ingredients with low volatile compounds could improve their flavour and increase their consumption.

Development and Chemical-Sensory Characterization of Chickpeas-Based Beverages Fermented with Selected Starters

Legume protein ingredients are receiving continuous interest for their potential to formulate plant-based dairy analogs. In this study, a legume-based slurry was produced from an Apulian black chickpeas (BCP) protein concentrate and fermented with three starter cultures, Streptococcus thermophilus (ST), a co-culture of ST with Lactococcus lactis (STLL) and a co-culture of ST with Lactobacillus plantarum (STLP). The effect of fermentation on the biochemical, texture and sensorial parameters was evaluated. The same beverage without inoculum was used as a control (CTRL). All the obtained fermented beverages were characterized by high protein (120.00 g kg−1) and low-fat contents (17.12 g kg−1). Fermentation contributed to a decrease in the contents of phytic acid by 10 to 79% and saturated fatty acids by 30 to 43%, with the STLP fermentation exercising the major effect. The three culture starters influenced the texture and sensorial attributes and the profile of the volatile compounds differently. Fermentation increased the lightness, consistency, cohesivity and viscosity of the formulated beverages. On a sensorial level, STLL had a major effect on the acidity, sourness and astringency, while both ST and STLP affected the creaminess, solubility and stickiness. Legumes and grass aromas were masked in LAB-fermented samples, probably due to a new VOC formation. The functional properties of LAB fermentation, along with the high protein content of the black chickpeas concentrate, provide the opportunity to formulate a clean label and safe plant-based fermented beverage with higher nutritional value compared to the others currently found in the market.

Quality and health dimensions of pulse-based dairy alternatives with chickpeas, lupins and mung beans

Health and environmental issues regarding dairy consumption have been highlighted in recent years leading to tremendous consumer demand for plant-based substitutes. In this review, we focused on quality and health dimensions of pulse-based dairy alternatives (PuBDA) using chickpeas, lupins and mung beans. Appraisal of existing documents show that there is limited information on PuBDA with the said pulses compared to similar materials such as soy and pea. Most of the studies focused on milk or fermented milks, either in full or partial substitution of the dairy ingredients with the pulses. Issues on stability, sensory properties, shelf life and nutritional quality were underlined by existing literature. Although it was emphasized in some reports the health potential through the bioactive components, there is scarce data on clinical studies showing actual health benefits of the featured PuBDA in this paper. There is also a scant number of these PuBDA that are currently available in the market and in general, these products have inferior nutritional quality compared to the animal-based counterparts. Technological innovations involving physical, biological and chemical techniques can potentially address the quality problems in the use of chickpeas, lupins, and mung beans as raw materials in dairy alternatives.

Heat Treatment, Cultivar and Formulation Modify the Sensory Properties and Consumer Acceptability of Gels Containing Faba Bean (Vicia faba L. minor) Protein Concentrates

Faba bean (Vicia faba L. minor) is an emerging plant-based ingredient due to its environmental, nutritional and functional benefits. However, like other pulses, it exhibits many off-flavours that limit its consumption. Little is known about the flavour of faba beans, and previous studies have focused on volatile compounds and the overall flavour. In the present study, xanthan gum gels were formulated with crude or heated protein concentrates from three faba bean cultivars and with the addition of oil and/or salt. A trained panel analysed the sensory properties of these gels, and a consumer test was carried out to assess their acceptability. The gels formulated with crude protein concentrates exhibited bitterness and green, metallic and rancid notes that decreased consumer appreciation. The heat treatment promoted pleasant notes such as potato, cereal and haricot bean notes and attenuated the most penalising descriptors associated with off-flavours. Cultivar 2 was characterised by fewer off-flavours and should be preferred over the other cultivars for the formulation of faba bean products. This work provides information on the sensory properties of different cultivars of faba bean concentrates and information likely to help improve their acceptability in the context of the formulation of food intended for humans.

Elemental Profiles of Legumes and Seeds in View of Chemometric Approach

The study aimed to evaluate fourteen elements’ profiles of legumes and oilseeds, of various geographical origins, available on the Polish market. They were determined by flame atomic absorption spectrometry (F-AAS) and spectrophotometric method (phosphorus) in 90 analytical samples. In general, legumes were characterized with lower mean concentrations of Ca, Mg, Na, P, Zn, Cu, Fe, Mn, and Cr than oilseeds. However, the concentrations ranges within each group differed significantly (p < 0.05). Calcium content varied between 6.2 and 243.5 mg/100 g in legumes and 38.4 and 2003 mg/100 g in oilseeds. In the case of Fe, its concentration was between 1.99 mg/100 g and 10.5 mg/100 g in legumes, and 2.05 mg and 12.15 mg/100 g in seeds. All the samples were characterized with Pb concentration below the LOQ (30 µg/100 g). In the case of Cd, its presence (>LOQ, 9 µg/100 g) was confirmed in one sample of legumes (soybean) and five samples of seeds (poppy seeds, roasted linseeds, hulled wheat, linseed, and sunflower seeds). The detected Cd content in every sample, except for soybean and hulled wheat, exceeded the permissible European standards. According to Kruskal-Wallis test results, Mg, Na, K, P, Zn, Cu, Mn, Cr, and Cd content depended on the type of the analyzed product, while in the case of botanical provenance such relationship was recorded for most of the analyzed components, except for Fe, Cr, and Co. Factor and cluster analyses classified the analyzed samples in view of their botanical species and type based on their mineral composition.