Precipitation of phosphate minerals by microorganisms isolated from a fixed-biofilm reactor used for the treatment of domestic wastewater

Effects of Physicochemical Parameters on Struvite Crystallization Based on Kinetics

The precipitation of struvite (MgNH₄PO₄·6H₂O) is considered to be a promising method for the recovery of phosphate from wastewater. In this review, the kinetic models, which are commonly used to explain the process of struvite crystallization, are described. The mixed-suspension mixed-product removal (MSMPR) model is based on the population balance equation (the size-dependent growth model and the size-independent growth model). Thereafter, the first-order kinetic fitting model that aligned with concentration changes in the substrate is summarized. Finally, the several physical and chemical factors that affected the efficiency of struvite crystallization are determined. The supersaturation ratio, which is seen as the driving force of struvite crystallization, is the main factor that influences crystallization; however, it cannot be used in practical applications of engineering because it is indirectly associated with the following factors: pH, the molar ratio of Mg:N:P, and the interference of foreign impurities. In this study, we present conclusions that should be used to guide further research studies, and encourage the engineering practice of wastewater treatment with struvite precipitation.

Discovery and Biotechnological Exploitation of Glycoside-Phosphorylases

Among carbohydrate active enzymes, glycoside phosphorylases (GPs) are valuable catalysts for white biotechnologies, due to their exquisite capacity to efficiently re-modulate oligo- and poly-saccharides, without the need for costly activated sugars as substrates. The reversibility of the phosphorolysis reaction, indeed, makes them attractive tools for glycodiversification. However, discovery of new GP functions is hindered by the difficulty in identifying them in sequence databases, and, rather, relies on extensive and tedious biochemical characterization studies. Nevertheless, recent advances in automated tools have led to major improvements in GP mining, activity predictions, and functional screening. Implementation of GPs into innovative in vitro and in cellulo bioproduction strategies has also made substantial advances. Herein, we propose to discuss the latest developments in the strategies employed to efficiently discover GPs and make the best use of their exceptional catalytic properties for glycoside bioproduction.

Understanding the Fundamental Basis for Biofilm Formation on Plastic Surfaces: Role of Conditioning Films

Conditioning films (CFs) are surface coatings formed by the adsorption of biomolecules from the surrounding environment that can modify the material-specific surface properties and precedes the attachment of microorganisms. Hence, CFs are a biologically relevant identity that could govern the behavior and fate of microplastics in the aquatic environment. In the present study, polyethylene terephthalate (PET) and polylactic acid (PLA) plastic cards were immersed in natural seawater to allow the formation of CFs. The changes in the surface roughness after 24 h were investigated by atomic force microscopy (AFM), and the surface changes were visualized by scanning electron microscopy (SEM). The global elemental composition of the conditioned surface was investigated by energy dispersive spectroscopy (EDS). Results indicated that marine conditioning of PET and PLA samples for 24 h resulted in an increase of ∼11 and 31% in the average surface roughness, respectively. SEM images revealed the attachment of coccoid-shaped bacterial cells on the conditioned surfaces, and the accumulation of salts of sodium and phosphate-containing precipitates was revealed through the EDS analysis. The results indicate that the increase in surface roughness due to conditioning is linked to a material’s hydrophilicity leading to a rapid attachment of bacteria on the surfaces. Further investigations into the CFs can unfold crucial knowledge surrounding the plastic-microbe interaction that has implications for medical, industrial, and environmental research.

Bacteria-induced mineral precipitation: a mechanistic review

Micro-organisms contribute to Earth's mineral deposits through a process known as bacteria-induced mineral precipitation (BIMP). It is a complex phenomenon that can occur as a result of a variety of physiological activities that influence the supersaturation state and nucleation catalysis of mineral precipitation in the environment. There is a good understanding of BIMP induced by bacterial metabolism through the control of metal redox states and enzyme-mediated reactions such as ureolysis. However, other forms of BIMP often cannot be attributed to a single pathway but rather appear to be a passive result of bacterial activity, where minerals form as a result of metabolic by-products and surface interactions within the surrounding environment. BIMP from such processes has formed the basis of many new innovative biotechnologies, such as soil consolidation, heavy metal remediation, restoration of historic buildings and even self-healing concrete. However, these applications to date have primarily incorporated BIMP-capable bacteria sampled from the environment, while detailed investigations of the underpinning mechanisms have been lagging behind. This review covers our current mechanistic understanding of bacterial activities that indirectly influence BIMP and highlights the complexity and connectivity between the different cellular and metabolic processes involved. Ultimately, detailed insights will facilitate the rational design of application-specific BIMP technologies and deepen our understanding of how bacteria are shaping our world.

Understanding the Fundamental Basis for Biofilm Formation on Plastic Surfaces: Role of Conditioning Films

Conditioning films (CFs) are surface coatings formed by the adsorption of biomolecules from the surrounding environment that can modify the material-specific surface properties and precedes the attachment of microorganisms. Hence, CFs are a biologically relevant identity that could govern the behavior and fate of microplastics in the aquatic environment. In the present study, polyethylene terephthalate (PET) and polylactic acid (PLA) plastic cards were immersed in natural seawater to allow the formation of CFs. The changes in the surface roughness after 24 h were investigated by atomic force microscopy (AFM), and the surface changes were visualized by scanning electron microscopy (SEM). The global elemental composition of the conditioned surface was investigated by energy dispersive spectroscopy (EDS). Results indicated that marine conditioning of PET and PLA samples for 24 h resulted in an increase of ∼11 and 31% in the average surface roughness, respectively. SEM images revealed the attachment of coccoid-shaped bacterial cells on the conditioned surfaces, and the accumulation of salts of sodium and phosphate-containing precipitates was revealed through the EDS analysis. The results indicate that the increase in surface roughness due to conditioning is linked to a material's hydrophilicity leading to a rapid attachment of bacteria on the surfaces. Further investigations into the CFs can unfold crucial knowledge surrounding the plastic-microbe interaction that has implications for medical, industrial, and environmental research.

Phosphorus and ammonium removal characteristics from aqueous solutions by a newly isolated plant growth-promoting bacterium

An indigenous plant growth-promoting bacterium isolated from Peganum Harmala rhizosphere in the arid ecosystem was found to solubilize and accumulate phosphates. This isolate was identified as Pseudomonas sp. (PHR6) by partial 16S rRNA gene sequence analysis. Controlled batch experiments on nutrients removal by this isolate in mineral medium showed relatively high efficiencies after 24 h of aerobic incubation with average values of 117.59 and 335.38 mg gVSS^-1 for phosphorus (P-PO₄) and nitrogen (N-NH₄), respectively. Furthermore, the strain performed heterotrophic nitrification ranging from 48.81% to 84.24% of the total removed nitrogen. On the other hand, the experimental results showed that a short idle period (24 h) significantly enhanced P accumulation (up to 95%) and N assimilation (up to 50%) of the total removed amounts. However, long idle period (20 days) revealed firstly aerobic phosphorous release phase succeeded by another removal one within 24 h of incubation. Overall, the idle treatment enhances P removal efficiency from the mineral liquid medium without significant effects on N-NH₄ removal performance. The isolated strain showed also significant nutrient removal ability from synthetic wastewater providing an accumulated fraction of 98% from the total removed phosphorus amount. This study highlights the potential contribution of the selected rhizobacterium PHR6 to both environmental nutrient recycling and pollution control especially regarding phosphorus.

Biofouling Formation and Bacterial Community Structure in Hybrid Moving Bed Biofilm Reactor-Membrane Bioreactors: Influence of Salinity Concentration

Two pilot-scale hybrid moving bed biofilm reactor-membrane bioreactors were operated in parallel for the treatment of salinity-amended urban wastewater under 6 hours of hydraulic retention time and 2500 mg L−1 total solids concentration. Two salinity conditions were tested: the constant salinity of 6.5 mS cm−1 electric conductivity (3.6 g L−1 NaCl) and the tidal-like variable salinity with maximum 6.5 mS cm−1 electric conductivity. An investigation was developed on the biofouling produced on the ultrafiltration membrane surface evaluating its bacterial community structure and its potential function in the fouling processes. The results showed that biofouling was clearly affected by salinity scenarios in terms of α-diversity and β-diversity and bacterial community structure, which confirms lower bacterial diversity under variable salinity conditions with Rhodanobacter and Dyella as dominant phylotypes. Microorganisms identified as bio-mineral formers belonged to genera Bacillus, Citrobacter, and Brevibacterium. These findings will be of help for the prevention and control of biofouling in saline wastewater treatment systems.

Characterisation of Phosphate Accumulating Organisms and Techniques for Polyphosphate Detection: A Review

Phosphate minerals have long been used for the production of phosphorus-based chemicals used in many economic sectors. However, these resources are not renewable and the natural phosphate stocks are decreasing. In this context, the research of new phosphate sources has become necessary. Many types of wastes contain non-negligible phosphate concentrations, such as wastewater. In wastewater treatment plants, phosphorus is eliminated by physicochemical and/or biological techniques. In this latter case, a specific microbiota, phosphate accumulating organisms (PAOs), accumulates phosphate as polyphosphate. This molecule can be considered as an alternative phosphate source, and is directly extracted from wastewater generated by human activities. This review focuses on the techniques which can be applied to enrich and try to isolate these PAOs, and to detect the presence of polyphosphate in microbial cells.

Isolation and metagenomic characterization of bacteria associated with calcium carbonate and struvite precipitation in a pure moving bed biofilm reactor-membrane bioreactor

A bench-scale pure moving bed bioreactor-membrane bioreactor (MBBR-MBR) used for the treatment of urban wastewater was analyzed for the identification of bacterial strains with the potential capacity for calcium carbonate and struvite biomineral formation. Isolation of mineral-forming strains on calcium carbonate and struvite media revealed six major colonies with a carbonate or struvite precipitation capacity in the biofouling on the membrane surface and showed that heterotrophic bacteria with the ability to precipitate calcium carbonate and struvite constituted ~7.5% of the total platable bacteria. These belonged to the genera Lysinibacillus, Trichococcus, Comamomas and Bacillus. Pyrosequencing analysis of the microbial communities in the suspended cells and membrane biofouling showed a high degree of similarity in all the samples collected with respect to bacterial assemblage. The study of operational taxonomic units (OTUs) identified through pyrosequencing suggested that ~21% of the total bacterial community identified in the biofouling could potentially form calcium carbonate or struvite crystals in the pure MBBR-MBR system used for the treatment of urban wastewater.