PEG-Plasma Hydrogels Increase Epithelialization Using a Human Ex Vivo Skin Model

Technological advances in fibrin for tissue engineering

Fibrin is a promising natural polymer that is widely used for diverse applications, such as hemostatic glue, carrier for drug and cell delivery, and matrix for tissue engineering. Despite the significant advances in the use of fibrin for bioengineering and biomedical applications, some of its characteristics must be improved for suitability for general use. For example, fibrin hydrogels tend to shrink and degrade quickly after polymerization, particularly when they contain embedded cells. In addition, their poor mechanical properties and batch-to-batch variability affect their handling, long-term stability, standardization, and reliability. One of the most widely used approaches to improve their properties has been modification of the structure and composition of fibrin hydrogels. In this review, recent advances in composite fibrin scaffolds, chemically modified fibrin hydrogels, interpenetrated polymer network (IPN) hydrogels composed of fibrin and other synthetic or natural polymers are critically reviewed, focusing on their use for tissue engineering.

Density Functional Theory Interaction Study of a Polyethylene Glycol-Based Nanocomposite with Cephalexin Drug for the Elimination of Wound Infection

In this paper, density functional theory (DFT) simulations are used to evaluate the possible use of a graphene oxide-based poly(ethylene glycol) (GO/PEG) nanocomposite as a drug delivery substrate for cephalexin (CEX), an antibiotic drug employed to treat wound infection. First, the stable configuration of the PEGylated system was generated with a binding energy of -25.67 kcal/mol at 1.62 Å through Monte Carlo simulation and DFT calculation for a favorable adsorption site. The most stable configuration shows that PEG interacts with GO through hydrogen bonding of the oxygen atom on the hydroxyl group of PEG with the hydrogen atom of the carboxylic group on GO. Similarly, for the interaction of the CEX drug with the GO/PEG nanocomposite excipient system, the adsorption energies are computed after determining the optimal and thermodynamically favorable configuration. The nitrogen atom from the amine group of the drug binds with a hydrogen atom from the carboxylic group of the GO/PEG nanocomposite at 1.75 Å, with an adsorption energy of -36.17 kcal/mol, in the most stable drug-excipient system. Drug release for tissue regeneration at the predicted target cell is more rapid in moist conditions than in the gas phase. The solubility of the suggested drug in the aqueous media around the open wound is shown by the magnitude of the predicted solvation energy. The findings from this study theoretically validate the potential use of a GO/PEG nanocomposite for wound treatment application as a drug carrier for sustained release of the CEX drug.

Application of an instructive hydrogel accelerates re-epithelialization of xenografted human skin wounds

Poor quality (eg. excessive scarring) or delayed closure of skin wounds can have profound physical and pyschosocial effects on patients as well as pose an enormous economic burden on the healthcare system. An effective means of improving both the rate and quality of wound healing is needed for all patients suffering from skin injury. Despite wound care being a multi-billion-dollar industry, effective treatments aimed at rapidly restoring the skin barrier function or mitigating the severity of fibrotic scar remain elusive. Previously, a hydrogel conjugated angiopoietin-1 derived peptide (QHREDGS; Q-peptide) was shown to increase keratinocyte migration and improve wound healing in diabetic mice. Here, we evaluated the effect of this Q-Peptide Hydrogel on human skin wound healing using a mouse xenograft model. First, we confirmed that the Q-Peptide Hydrogel promoted the migration of adult human keratinocytes and modulated their cytokine profile in vitro. Next, utilizing our human to mouse split-thickness skin xenograft model, we found improved healing of wounded human epidermis following Q-Peptide Hydrogel treatment. Importantly, Q-Peptide Hydrogel treatment enhanced this wound re-epithelialization via increased keratinocyte migration and survival, rather than a sustained increase in proliferation. Overall, these data provide strong evidence that topical application of QHREDGS peptide-modified hydrogels results in accelerated wound closure that may lead to improved outcomes for patients.

Chronic wounds

Chronic wounds are characterized by their inability to heal within an expected time frame and have emerged as an increasingly important clinical problem over the past several decades, owing to their increasing incidence and greater recognition of associated morbidity and socio-economic burden. Even up to a few years ago, the management of chronic wounds relied on standards of care that were outdated. However, the approach to these chronic conditions has improved, with better prevention, diagnosis and treatment. Such improvements are due to major advances in understanding of cellular and molecular aspects of basic science, in innovative and technological breakthroughs in treatment modalities from biomedical engineering, and in our ability to conduct well-controlled and reliable clinical research. The evidence-based approaches resulting from these advances have become the new standard of care. At the same time, these improvements are tempered by the recognition that persistent gaps exist in scientific knowledge of impaired healing and the ability of clinicians to reduce morbidity, loss of limb and mortality. Therefore, taking stock of what is known and what is needed to improve understanding of chronic wounds and their associated failure to heal is crucial to ensuring better treatments and outcomes.

Advancements in Extracellular Matrix-Based Biomaterials and Biofabrication of 3D Organotypic Skin Models

Over the last decades, three-dimensional (3D) organotypic skin models have received enormous attention as alternative models to in vivo animal models and in vitro two-dimensional assays. To date, most organotypic skin models have an epidermal layer of keratinocytes and a dermal layer of fibroblasts embedded in an extracellular matrix (ECM)-based biomaterial. The ECM provides mechanical support and biochemical signals to the cells. Without advancements in ECM-based biomaterials and biofabrication technologies, it would have been impossible to create organotypic skin models that mimic native human skin. In this review, the use of ECM-based biomaterials in the reconstruction of skin models, as well as the study of complete ECM-based biomaterials, such as fibroblasts-derived ECM and decellularized ECM as a better biomaterial, will be highlighted. We also discuss the benefits and drawbacks of several biofabrication processes used in the fabrication of ECM-based biomaterials, such as conventional static culture, electrospinning, 3D bioprinting, and skin-on-a-chip. Advancements and future possibilities in modifying ECM-based biomaterials to recreate disease-like skin models will also be highlighted, given the importance of organotypic skin models in disease modeling. Overall, this review provides an overview of the present variety of ECM-based biomaterials and biofabrication technologies available. An enhanced organotypic skin model is expected to be produced in the near future by combining knowledge from previous experiences and current research.

Safety and efficacy of acellular human amniotic fluid and membrane in the treatment of non-healing wounds in a patient with chronic venous insufficiency

Chronic, non-healing venous ulcers of the lower extremity are often limb-threatening conditions. Their management is characterized by a prolonged and frequently frustrating clinical course that represents an economic burden to both the patient and healthcare system. During the last two decades, thermal ablation of underlying incompetent venous systems has been extensively utilized to treat chronic venous insufficiency. Despite successful correction of venous hypertension, a substantial subgroup of patients remain affected by non-healing venous ulcers, thus posing a significant clinical challenge. In this case report, we detail quantitative and qualitative wound treatment course in a patient refractory to standard interventions, by treatment with a combination of cell-free amniotic fluid and dehydrated amniotic membrane following successful thermal ablation of refluxing veins.

Hyaluronic acid-fibrin hydrogels show improved mechanical stability in dermo-epidermal skin substitutes

Human plasma-derived bilayered skin substitutes have been successfully used by our group in different skin tissue engineering applications. However, several issues associated with their poor mechanical properties were observed, and they often resulted in rapid contraction and degradation. In this sense, hydrogels composed of plasma-derived fibrin and thiolated-hyaluronic acid (HA-SH, 0.05-0.2% w/v) crosslinked with poly(ethylene glycol) diacrylate (PEGDA, 2:1, 6:1, 10:1 and 14:1 mol of thiol to moles of acrylate) were developed to reduce the shrinking rates and enhance the mechanical properties of the plasma-derived matrices. Plasma/HA-SH-PEGDA hydrogels showed a decrease in the contraction behaviour ranging from 5% to 25% and an increase in Young's modulus. Furthermore, the results showed that a minimal amount of the added HA-SH was able to escape the plasma/HA-SH-PEGDA hydrogels after incubation in PBS. The results showed that the increase in rigidity of the matrices as well as the absence of adhesion cellular moieties in the second network of HA-SH/PEGDA, resulted in a decrease in contraction in the presence of the encapsulated primary human fibroblasts (hFBs), which may have been related to an overall decrease in proliferation of hFBs found for all hydrogels after 7 days with respect to the plasma control. The metabolic activity of hFB returned to the control levels at 14 days except for the 2:1 PEGDA crosslinking ratio. The metabolic activity of primary human keratinocytes (hKCs) seeded on the hydrogels showed a decrease when high amounts of HA-SH and PEGDA crosslinker were incorporated. Organotypic skins formed in vitro after 21 days with plasma/HA-SH-PEGDA hydrogels with an HA content of 0.05% w/v and a 2:1 crosslinking ratio were up to three times thicker than the plasma controls, evidencing a reduction in contraction, while they also showed better and more homogeneous keratin 10 (K10) expression in the supra-basal layer of the epidermis. Furthermore, filaggrin expression showed the formation of an enhanced stratum corneum for the constructs containing HA. These promising results indicate the potential of using these biomimetic hydrogels as in vitro skin models for pharmaceutical products and cosmetics and future work will elucidate their potential functionality for clinical treatment.

Elastin-Plasma Hybrid Hydrogels for Skin Tissue Engineering

Dermo-epidermal equivalents based on plasma-derived fibrin hydrogels have been extensively studied for skin engineering. However, they showed rapid degradation and contraction over time and low mechanical properties which limit their reproducibility and lifespan. In order to achieve better mechanical properties, elasticity and biological properties, we incorporated a elastin-like recombinamer (ELR) network, based on two types of ELR, one modified with azide (SKS-N₃) and other with cyclooctyne (SKS-Cyclo) chemical groups at molar ratio 1:1 at three different SKS (serine-lysine-serine sequence) concentrations (1, 3, and 5 wt.%), into plasma-derived fibrin hydrogels. Our results showed a decrease in gelation time and contraction, both in the absence and presence of the encapsulated human primary fibroblasts (hFBs), higher mechanical properties and increase in elasticity when SKSs content is equal or higher than 3%. However, hFBs proliferation showed an improvement when the lowest SKS content (1 wt.%) was used but started decreasing when increasing SKS concentration at day 14 with respect to the plasma control. Proliferation of human primary keratinocytes (hKCs) seeded on top of the hybrid-plasma hydrogels containing 1 and 3% of SKS showed no differences to plasma control and an increase in hKCs proliferation was observed for hybrid-plasma hydrogels containing 5 wt.% of SKS. These promising results showed the need to achieve a balance between the reduced contraction, the better mechanical properties and biological properties and indicate the potential of using this type of hydrogel as a testing platform for pharmaceutical products and cosmetics, and future work will elucidate their potential.

Effect of Fibrin Concentration on the In Vitro Production of Dermo-Epidermal Equivalents

Human plasma-derived bilayered skin substitutes were successfully used by our group to produce human-based in vitro skin models for toxicity, cosmetic, and pharmaceutical testing. However, mechanical weakness, which causes the plasma-derived fibrin matrices to contract significantly, led us to attempt to improve their stability. In this work, we studied whether an increase in fibrin concentration from 1.2 to 2.4 mg/mL (which is the useful fibrinogen concentration range that can be obtained from plasma) improves the matrix and, hence, the performance of the in vitro skin cultures. The results show that this increase in fibrin concentration indeed affected the mechanical properties by doubling the elastic moduli and the maximum load. A structural analysis indicated a decreased porosity for the 2.4 mg/mL hydrogels, which can help explain this mechanical behavior. The contraction was clearly reduced for the 2.4 mg/mL matrices, which also allowed for the growth and proliferation of primary fibroblasts and keratinocytes, although at a somewhat reduced rate compared to the 1.2 mg/mL gels. Finally, both concentrations of fibrin gave rise to organotypic skin cultures with a fully differentiated epidermis, although their lifespans were longer (25–35%) in cultures with more concentrated matrices, which improves their usefulness. These systems will allow the generation of much better in vitro skin models for the testing of drugs, cosmetics and chemicals, or even to “personalized” skin for the diagnosis or determination of the most effective treatment possible.

Effects of various wound dressings on microbial growth in perfused equine musculocutaneous flaps

OBJECTIVE

To compare the effect of multiple wound dressings on microbial growth in a perfused equine wound model.

SAMPLE

Abdominal musculocutaneous flaps from 16 equine cadavers.

PROCEDURES

8 full-thickness skin wound covered were created in each flap. Tissues were perfused with saline (0.9% NaCl) solution. Wounds were inoculated with methicillin-resistant Staphylococcus aureus (MRSA) or Pseudomonas aeruginosa (10⁶ CFUs), incubated, and covered with a dressing containing activated charcoal, boric acid, cadexomer iodine, calcium alginate, manuka honey, nanoparticle silver, or polyhexamethylene biguanide or with a control (nonadherent gauze) dressing. Muscle biopsy specimens were obtained at baseline (immediately prior to dressing application) and 6, 12, 18, and 24 hours later for mean bacterial load (MBL) determination. The MBLs at each subsequent time point were compared with that at baseline within dressing types, and MBLs at each time point were compared among dressing types.

RESULTS

MBLs in MRSA-inoculated wounds covered with cadexomer iodine dressings were significantly decreased from baseline at the 6- and 12-hour time points. For P aeruginosa-inoculated wounds, MBLs were significantly increased from baseline in all wounds at various times except for wounds with cadexomer iodine dressings. The MBLs of wounds with cadexomer iodine dressings were lower than all others, although not always significantly different from those for wounds with boric acid, manuka honey, nanoparticle silver, and polyhexamethylene biguanide dressings.

CONCLUSIONS AND CLINICAL RELEVANCE

In this nonviable perfused wound model, growth of MRSA and P aeruginosa was most effectively reduced or inhibited by cadexomer iodine dressings. These results and the effect of the dressings on wound healing should be confirmed with in vivo studies.

Contraction of fibrin-derived matrices and its implications for in vitro human skin bioengineering

It is well-known that fibroblasts play a fundamental role in the contraction of collagen and fibrin hydrogels when used in the production of in vitro bilayered skin substitutes. However, little is known about the contribution of other factors, such as the hydrogel matrix itself, on this contraction. In this work, we studied the contraction of plasma-derived fibrin hydrogels at different temperatures (4, 23, and 37°C) in an isotonic buffer (phosphate-buffered saline). These types of hydrogels presented a contraction of approximately 30% during the first 24 hr, following a similar kinetics irrespectively of the temperature. This kinetics continued in a slowed down manner to reach a plateau value of 40% contraction after 10-15 days. Contraction of commercial fibrinogen hydrogels was studied under similar conditions and the kinetics was completed after 8 hr, reaching values between 20 and 70% depending on the temperature. We attribute these substantial differences to a modulatory effect on the contraction due to plasma proteins which are initially embedded in, and progressively released from, the plasma-based hydrogels. The elastic modulus of hydrogels measured at a constant frequency decreased with increasing temperature in 7-day gels. Rheological measurements showed the absence of a strain-hardening behavior in the plasma-derived fibrin hydrogels. Finally, plasma-derived fibrin hydrogels with and without human primary fibroblast and keratinocytes were prepared in transwell inserts and their height measured over time. Both cellular and acellular gels showed a height reduction of 30% during the first 24 hr likely due to the above-mentioned intrinsic fibrin matrix contraction.

Towards advanced wound regeneration

Wound management is a major contributor towards the economic burden placed upon the national health service (NHS), serving as an important target for the development of advanced therapeutic interventions. The economic expenditure of wound care for the NHS exceeds £5 billion per annum, thus presenting a significant opportunity for the introduction of alternative treatments in regards to their approach in tackling the ever increasing prevalence of wound management associated problems. As most wounds typically fall under the acute or chronic category, it is therefore necessary to design a therapeutic intervention capable of effectively resolving the pathologies associated with each problem. Such an intervention should be of increased economic viability and therapeutic effectiveness when compared to standardized treatments, thus helping to alleviate the financial burden imposed upon the NHS. The purpose of this review is to critically analyse the various aspects associated with wound management, detailing the fundamental concepts of dermal regeneration, whilst also providing an evaluation of the different materials and methods that can be utilised to achieve maximal wound regeneration. The primary aspects of this review revolve around the three concepts of antibacterial methodology, enhancement of dermal regeneration and the utilisation of a carrier medium to facilitate the regenerative process. Each aspect is explored, conveying its justifications as a target for dermal regeneration, whilst offering various solutions towards the fulfilment of a therapeutic design that is both effective and financially feasible.

Human Wound Healing Ex Vivo Model with Focus on Molecular Markers

Wound healing is a complex, multifactorial process that is divided in sequential and overlapping phases in order to restore the skin barrier. For the study of wound healing, different in vivo, in vitro, and ex vivo models have been used in the past. Here we describe in detail the methodology of the human skin punch-in-a-punch ex vivo wound healing model.

Plasma-Alginate Composite Material Provides Improved Mechanical Support for Stem Cell Growth and Delivery

Blood plasma-based products have been recently utilized in different tissue engineering applications, ranging from soft tissue repair to bone regeneration. Plasma contains fibrinogen which can be converted to an insoluble fibrin-laden gel in the presence of activated thrombin. In tissue engineering, these plasma-based materials can serve either as a three-dimensional scaffold to deliver therapeutic cells in vivo or as a growth factor-rich supply for tissue regeneration. Unfortunately, plasma-based materials are often mechanically weak and easily deformed, thus limiting their usability in harsh clinical settings. Simpler methods to create sturdier plasma-based materials are therefore needed. To this end, we hypothesized that combining alginate with plasma can create a composite plasma material with improved mechanical properties. Incorporating alginate into plasma produced composite gels with increasing bulk stiffness, as measured by rheology. Specifically, the plasma-alginate composite (PAC) gels with an alginate concentration of 2.86 mg/mL were 10-fold stiffer than pure plasma gels (11 vs 112 Pa). Interestingly, gel lysis rates were unchanged despite increasing alginate concentration (lysis time approximately 50 min). Adipose-derived stem cells cultured in the stiffer PAC gels expressed stemness markers (THY1, ENG, NT5E) at levels comparable to those in the pure plasma gels. Similarly, proangiogenic factor secretion was also constant across all gel conditions. In sum, we envision this PAC gel system will extend the use of plasma gel-based therapies into more rigorous clinical applications.