Molecular Functionality of Plant Proteins from Low- to High-Solid Systems with Ligand and Co-Solute

Food Hydrocolloids: Structure, Properties, and Applications

Hydrocolloids are extensively used in the food industry for various functions, including gelling, thickening, stabilizing foams, emulsions, and dispersions, as well as facilitating the controlled release of flavor [...].

Application of emerging thermal and nonthermal technologies for improving textural properties of food grains: A critical review

Emerging nonthermal and thermal food processing technologies are a better alternative to conventional thermal processing techniques because they offer high-quality, minimally processed food. Texture is important in the food industry because it encompasses several product attributes and plays a vital role in consumer acceptance. Therefore, it is imperative to analyze the extent to which these technologies influence the textural attributes of food grains. Physical forces produced by cavitation are attributed to ultrasound treatment-induced changes in the conformational and structural properties of food proteins. Pulsed electric field treatment causes polarization of starch granules, damaging the dense outer layer of starch granules and decreasing the mechanical strength of starch. Prolonged radio frequency heating results in the denaturation of proteins and gelatinization of starch, thus reducing binding tendency during cooking. Microwave energy induces rapid removal of water from the product surface, resulting in lower bulk density, low shrinkage, and a porous structure. However, evaluating the influence of these techniques on food grain texture is difficult owing to differences in their primary operation mode, operating conditions, and equipment design. To maximize the advantages of nonthermal and thermal technologies, in-depth research should be conducted on their effects on the textural properties of different food grains while ensuring the selection of appropriate operating conditions for each food grain type. This article summarizes all recent developments in these emerging processing technologies for food grains, discusses their potential applications and drawbacks, and presents prospects for future developments in food texture enhancement.

Synthesis and characterization of La QDs: sensors for anions and H2O2

The development of sensitive and accurate fluorescence sensors for the detection of anions and reactive oxygen species (ROS, H2O2) is essential as they play significant roles in biological and chemical processes.

Controlled oxidation and digestion of Pickering emulsions stabilized by quinoa protein and (-)-epigallocatechin-3-gallate (EGCG) hybrid particles

In this study, we prepared Pickering emulsions stabilized by quinoa protein isolate (QPI) and (-)-epigallocatechin-3-gallate (EGCG) non-covalent hybrid particles using ultrasonic emulsification technique and demonstrated lipid oxidation and in vitro digestion process of Pickering emulsions. The interaction forces between QPI and EGCG were characterized using fluorescence spectroscopy, isothermal titration calorimetry, and Fourier transform infrared spectroscopy. Results indicated that the non-covalent QPI/EGCG hybrid particles were formed mainly via hydrophobic interactions, hydrogen bonds, and electrostatic interactions at pH 5. Then, the QPI/EGCG non-covalent hybrid particles were applied to modify the Pickering emulsion with ultrasonic homogenization. The rheological experimental results showed that the energy storage modulus (G') was higher than the loss modulus (G″), indicating that the emulsion had solid-like properties. As a physical barrier, interfacial layer fabricated by antioxidant QPI/EGCG hybrid particles limited lipid oxidation at 60 °C for 15 days. At 37 °C, the QPI/EGCG hybrid particles stabilized Pickering emulsions with robust antioxidant interfacial structure limited the lipid digestion under simulated gastrointestinal tract (gastric, small intestine phases). Thus, EGCG and quinoa proteins were more resistant to free radical oxidation and gastrointestinal digestion with the assistance of ultrasound. It provides a basis for better development of food and drug delivery systems by fully utilizing the antioxidant properties of plant polyphenols.

Improvement of structural, physicochemical, and rheological properties of porcine myofibrillar proteins by high-intensity ultrasound treatment for application as Pickering stabilizers

This study aimed to evaluate the potential of time-dependent (0, 15, 30, 60, 120 min) treatment of porcine-derived myofibrillar proteins (MPs) with high-intensity ultrasound (HIU) for utilizing them as a Pickering stabilizer and decipher the underlying mechanism by which HIU treatment increases the emulsification and dispersion stability of MPs. To accomplish this, we analyzed the structural, physicochemical, and rheological properties of the HIU-treated MPs. Myosin heavy chain and actin were observed to be denatured, and the particle size of MPs decreased from 3,342.7 nm for the control group to 153.9 nm for 120 min HIU-treated MPs. Fourier-transformed infrared spectroscopy and circular dichroism spectroscopy confirmed that as the HIU treatment time increased, α-helical content increased, and β-sheet decreased, indicating that the protein secondary/tertiary structure was modified. In addition, the turbidity, apparent viscosity, and viscoelastic properties of the HIU-treated MP solution were decreased compared to the control, while the surface hydrophobicity was significantly increased. Analyses of the emulsification properties of the Pickering emulsions prepared using time-dependent HIU-treated MPs revealed that the emulsion activity index and emulsion stability index of HIU-treated MP were improved. Confocal laser scanning microscopy images indicated that small spherical droplets adsorbed with MPs were formed by HIU treatment and that dispersion stabilities were improved because the Turbiscan stability index of the HIU-treated group was lower than that of the control group. These findings could be used as supporting data for the utilizing porcine-derived MPs, which have been treated with HIU for appropriate time periods, as Pickering stabilizers.

Proteomic and computational characterisation of 11S globulins from grape seed flour by-product and its interaction with malvidin 3-glucoside by molecular docking

Grape seed flour by-product (GSBP) is an economic and renewable source of proteins, increasingly being explored due to interesting technological application such as colour protection in rich-anthocyanins beverages. Globulin-like proteins from GSBP were characterised by proteomic and computational studies. MALDI TOF/TOF analysis revealed the presence of two 11S globulins (acid and basic), whose 3D structures have been elucidated for the first time in Vitis vinifera L. grape seeds by using homology models and molecular dynamics. The secondary structure showed 11 α-helices and 25 β-sheets for acid and 12 α-helices and 24 β-sheets for basic 11S globulins. Molecular docking results indicate that both grape seed 11S globulins could establish different types of non-covalent interactions (π-π) with malvidin 3-O-glucoside (wine anthocyanin), which suggest a possible colour protection similar to that occurring in copigmentation phenomenon. These findings provide valuable information of globulin family proteins that could be relevant in food industry applications.

Nano-enabled plant-based colloidal delivery systems for bioactive agents in foods: Design, formulation, and application

Consumers are becoming increasingly aware of the impact of their dietary choices on the environment, animal welfare, and health, which is causing many of them to adopt more plant-based diets. For this reason, many sectors of the food industry are reformulating their products to contain more plant-based ingredients. This article describes recent research on the formation and application of nano-enabled colloidal delivery systems formulated from plant-based ingredients, such as polysaccharides, proteins, lipids, and phospholipids. These delivery systems include nanoemulsions, solid lipid nanoparticles, nanoliposomes, nanophytosomes, and biopolymer nanoparticles. The composition, size, structure, and charge of the particles in these delivery systems can be manipulated to create novel or improved functionalities, such as improved robustness, higher optical clarity, controlled release, and increased bioavailability. There have been major advances in the design, assembly, and application of plant-based edible nanoparticles within the food industry over the past decade or so. As a result, there are now a wide range of different options available for creating delivery systems for specific applications. In the future, it will be important to establish whether these formulations can be produced using economically viable methods and provide the desired functionality in real-life applications.

Pulse protein ingredient modification

Increasing population and depletion of resources have paved the way to find sustainable and nutritious alternative protein sources. Pulses have been identified as a nutritious and inexpensive alternative source of protein that can meet this market demand. Pulses can be converted into protein concentrates and isolates through dry and wet separation techniques. Wet extraction results in relatively pure protein isolates but less sustainable due to higher energy requirements and high waste generation. Dry separation focuses on ingredient functionality rather than molecular level purity. These extracted pulse protein ingredients can be incorporated into different food systems to increase the nutritional value and to achieve the desired functionality. But many plant-based alternative proteins including pulses, face several formulation challenges especially in nutritional, sensory, and functional aspects. Native pulse protein ingredients can contain antinutrients, beany flavor, and undesirable functionality. Modification by biological (enzymatic, fermentation), chemical (acylation, deamidation, glycosylation, phosphorylation), and physical (cold plasma, extrusion, heat, high pressure, ultrasound) methods or a combination of these can improve pulse protein ingredients at the macro and micro level for their desired use. These modification processes will thermodynamically change the structural and conformational characteristics of proteins and expect to improve the quality. © 2021 Society of Chemical Industry.

Lupin Protein Isolate Structure Diversity in Frozen-Cast Foams: Effects of Transglutaminases and Edible Fats

This study addresses an innovative approach to generate aerated foods with appealing texture through the utilization of lupin protein isolate (LPI) in combination with edible fats. We show the impact of transglutaminases (TGs; SB6 and commercial), glycerol (Gly), soy lecithin (Lec) and linoleic acid (LA) on the micro- and nanostructure of health promoting solid foods created from LPI and fats blends. 3-D tomographic images of LPI with TG revealed that SB6 contributed to an exceptional bubble spatial organization. The inclusion of Gly and Lec decreased protein polymerization and also induced the formation of a porous layered material. LA promoted protein polymerization and formation of homogeneous thick layers in the LPI matrix. Thus, the LPI is a promising protein resource which when in blend with additives is able to create diverse food structures. Much focus has been placed on the great foamability of LPI and here we show the resulting microstructure of LPI foams, and how these were improved with addition of TGs. New food applications for LPI can arise with the addition of food grade dispersant Lec and essential fatty-acid LA, by improved puffiness, and their contributing as replacer of chemical leavening additives in gluten-free products.

Elucidation of the 3D structure of grape seed 7S globulin and its interaction with malvidin 3-glucoside: A molecular modeling approach

Plant proteins are biopolymers with interesting technological applications for the food industry due to their ability to interact with phenolic compounds such as anthocyanins. The 3D structure of the 7S globulin from grape seed was elucidated for the first time using a homology model. The constructed 3D model showed that grape seed 7S globulin is rich in α-helices and β-sheets stabilized by six disulfide bridges. The interaction with the major grape anthocyanin malvidin-3-glucoside was also assessed by Docking and Molecular Dynamic simulation. Theoretical results demonstrated that 7S globulin interacts with Mv3glc through hydrogen, alkyl and π-alkyl bonds and the flavylium cation is oriented towards a hydrophobic region of the protein, being protected from hydration. Results provide valuable insights for understanding the mechanisms involved in the molecular interaction of grape anthocyanins with grape seed proteins that could be relevant to use them as potential color protecting agents in food industry applications.