Keratin Biomembranes as a Model for Studying Onychomycosis

Keratin/Copper Complex Electrospun Nanofibers for Antibacterial Treatments: Property Investigation and In Vitro Response

The frontiers of antibacterial materials in the biomedical field are constantly evolving since infectious diseases are a continuous threat to human health. In this work, waste-wool-derived keratin electrospun nanofibers were blended with copper by an optimized impregnation procedure to fabricate antibacterial membranes with intrinsic biological activity, excellent degradability and good cytocompatibility. The keratin/copper complex electrospun nanofibers were multi-analytically characterized and the main differences in their physical-chemical features were related to the crosslinking effect caused by Cu2+. Indeed, copper ions modified the thermal profiles, improving the thermal stability (evaluated by differential scanning calorimetry and thermogravimetry), and changed the infrared vibrational features (determined by infrared spectroscopy) and the chemical composition (studied by an X-ray energy-dispersive spectroscopy probe and optical emission spectrometry). The copper impregnation process also affected the morphology, leading to partial nanofiber swelling, as evidenced by scanning electron microscopy analyses. Then, the membranes were successfully tested as antibacterial materials against gram-negative bacteria, Escherichia coli. Regarding cytocompatibility, in vitro assays performed with L929 cells showed good levels of cell adhesion and proliferation (XTT assay), and no significant cytotoxic effect, in comparison to bare keratin nanofibers. Given these results, the material described in this work can be suitable for use as antibiotic-free fibers for skin wound dressing or membranes for guided tissue regeneration.

Keratin-based bioplastics extracted from chicken feathers: Effect of chitosan concentration on the structural, chemical bonding, and mechanical properties of bioplastics

Keratin was synthesized by alkaline hydrolysis from chicken feathers and then continue by casting method for producing bioplastics with additional various amounts of chitosan as a filler, polyvinyl alcohol (PVA) and glycerol as a plasticizer. The main purpose is analysis the effect of chitosan on the structural properties using quantitative analysis of X-ray diffraction (XRD) spectra, chemical bonding by Fourier transforms infrared (FTIR) spectra, and mechanical properties by texture analyser to the keratin-based bioplastics. Biodegradation of bioplastics was analysed from the loss of weight by burying in the soil. It's found that, the additional of chitosan (0 %, 2 %, 5 %, and 8 %) increased the crystallinity of bioplastics by 11.83 %, 11.12 %, 18.99 %, and 17.03 %, respectively, but decreasing tensile strength and elasticity of bioplastics. Degradation of bioplastic keratin-based shows that the addition of chitosan can reduce the degradation time which is directly proportional to the loss of CO bonds. The highest degradation rate is 89.29 % in 49 days for keratin-based bioplastics with 8 % chitosan, indicated that high potential for future production.

Production and characterization of human hair keratin bioplastic films with novel plasticizers

Since their invention, conventional plastics have contributed in the betterment of the society in numerous ways, nevertheless their deleterious impacts on the natural ecosystems and living creatures is irrefutable. The management of plastic waste generated is a concern worldwide and therefore quest for the plastic alternates or bioplastics is imminent. Here, we explore the suitability of keratin from human hair waste as the candidate for the production of bioplastic films. Keratin extracted from hair was used to form the films or 'kertics' by solution casting and curing. Ethanediol, di-ethylene glycol and tri-ethylene glycol were used as novel plasticizers along with glycerol in the keratin film formation. The film prepared were of the thickness 190-220 µm with the area of about 4.54 ± 0.2 cm2. Water uptake by G100, ED100, DEG100 and TEG100 films was recorded to be 4.8, 6.2, 4.9 and 6.3% respectively. FESEM analysis revealed that the films with 100 µl of 1% glycerol (G100) had continuous surface morphology except few pits of 0.1 µm, also DEG100 and TEG100 films have the most uniform surface morphology with no evident pits, holes or bulges. X-ray diffractogram showed characteristic peak of keratin at 19.5° and the d-spacing value observed was 0.45 nm. The FTIR studies suggested that the films retained keratin in non degraded form, and possessed the characteristic Amide peaks. The films were also found to be biodegradable in studies involving keratinophilic fungal strain of A. oryzae. These films could found potential applications in packaging industry, disposable items manufacturing and biomaterial generation.

Investigation of human hair keratin-based nanofibrous scaffold for skin tissue engineering application

Keratin-based nanofibers were fabricated using the electrospinning technique, and their potential as scaffolds for tissue engineering was investigated. Keratin, extracted from the human hair, was blended with poly(vinyl alcohol) (PVA) in an aqueous medium. Morphological characterizations of the fabricated PVA-keratin nanofiber (PK-NF) random and aligned scaffolds performed using a scanning electron microscope (SEM) revealed the formation of uniform and randomly oriented nanofibers with an interconnected three-dimensional network structure. The mean diameter of the nanofibers ranged from 100 to 250 nm. Functional groups and structural studies were done by infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis. FTIR study suggested that PVA interacted with keratin by hydrogen bonding. Moreover, the in vitro cell culture study could suggest that PK-NF scaffolds were non-cytotoxic by supporting the growth of murine embryonic stem cells (ESCs), human keratinocytes (HaCaT), and dermal fibroblast (NHDF) cell lines. Further, the immunocytochemical characterization revealed the successful infiltration, adhesion, and growth of ESCs, HaCaT, and NHDF cells seeded on PK-NF scaffolds. However, there was no noteworthy difference observed concerning cell growth and viability irrespective of the random and aligned internal fibril arrangement of the PK-NF scaffolds. The infiltration and growth pattern of HaCaT and NHDF cells adjacent to each other in a 3D co-culture study mimicked that of epidermal and dermal skin cells and indeed underscored the potential of PK-NFs as a scaffold for skin tissue engineering.

One-Pot Extraction of Bioresources from Human Hair via a Zero-Waste Green Route

In recent years, the extraction of bioresources from biowaste via green chemistry and their utilization for the production of materials has gained global momentum due to growing awareness of the concepts of sustainability. Herein, we report a benign process using an ionic liquid (IL), 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), for the simultaneous extraction of keratin and melanin from human hair. Chemical characterization, secondary structure studies, and thermal analysis of the regenerated protein were performed thoroughly. Hemolytic potential assays demonstrated hemocompatibility of the keratin, and thus, it can be used in blood-contacting biomaterials such as sealants, catheters, hemostats, tissue engineering scaffolds, and so on. Scanning electron microscopy showed retention of the ellipsoidal morphology of melanin after the extraction procedure. The pigment demonstrated the ability to reduce 2,2-diphenyl-1-picrylhydrazyl indicative of its free-radical scavenging activity. Notably, the IL could be recovered and recycled from the dialysis remains which also exhibited conductivity and can be potentially used for bioelectronics. Altogether, this work investigates an extraction process of biopolymers using green chemistry from abundantly available biowaste for the production of biomaterials and does not produce any noxious waste matter.

Efficacy of Bovine Nail Membranes as In Vitro Model for Onychomycosis Infected by Trichophyton Species

Onychomycosis is a fungal infection caused by different etiologic agents, including dermatophytes that specifically colonize keratin-rich substrates. The aim of this work was to investigate mechanical modifications of bovine membranes (used as an in vitro nail model) placed in contact with Trichophyton species. Trichophyton strains were isolated from toenails specimens. The procedure was set up by spreading T. rubrum,T. interdigitale, and T. mentagrophytes strains on Petri dishes with minimal and rich media; after that, bovine membranes were placed in the center. After 27 days, T. interdigitale and T. mentagrophytes significantly reduced the thickness of the colonized membranes, whereas two T. rubrum strains showed the highest degradation limited to the small colonized area. These results were confirmed by SEM images of the colonization profile on membranes. Mechanical analyses performed on membranes were used as an innovative method to evaluate the thickness and structural integrity of membranes variation following fungal colonization. In conclusion, mechanical analyses of substrate may be used as a procedure for the development of a new onychomycosis diagnosis test in order to develop personalized and strain-specific treatment.

Electrospun non-wovens potential wound dressing material based on polyacrylonitrile/chicken feathers keratin nanofiber

Electrospinning nanofibers have a tremendous interest in biomedical applications such as tissue engineering, drug administration, and wound healing because of their ability to replicate and restore the function of the natural extracellular matrix found in tissues. The study’s highlight is the electrospinning preparation and characterization of polyacrylonitrile with chicken feather keratin as an additive. In this study, keratin was extracted from chicken feather waste using an environmentally friendly method and used to reinforce polymeric nanofiber mats. Scanning electron microscopy, energy dispersive spectroscopy, and transmission electron microscopy were used to examine the morphology and the structure of the prepared nanofiber mats. The effect of keratin on the porosity and the tensile strength of reinforcing nanofibers is investigated. The porosity ratio of the nanofiber mats goes up from 24.52 ± 2.12 for blank polyacrylonitrile (PAN (NF)) to 90.89 ± 1.91% for polyacrylonitrile nanofiber with 0.05 wt% keratin (PAN/0.05% K). Furthermore, keratin reinforcement improves the nanofiber's mechanical properties, which are important for wound dressing application, as well as its antibacterial activity without causing hemolysis (less than 2%). The best antibacterial activities were observed against Pseudomonas aeruginosa (30 ± 0.17 mm inhibition zone) and Staphylococcus aureus (29 ± 0.31 mm inhibition zone) for PAN/0.05% K sample, according to the antibacterial test. This research has a good potential to broaden the use of feather keratin-based nanofibers in wound healing.

Bioactive and multifunctional keratin-pullulan based hydrogel membranes facilitate re-epithelization in diabetic model

Hydrogel membrane dressings with multifunctional tunable properties encompassing biocompatibility, anti-bacterial, oxygen permeability, and adequate mechanical strength are highly preferred for wound healing. The present study aimed to develop biopolymer-based hydrogel membranes for the controlled release of therapeutic agent at the wound site. Toward this end we developed Cefotaxime sodium (CTX) loaded keratin (KR)-pullulan (PL) based hydrogel membrane dressings. All membranes show optimized vapor transmission rate (≥1000 g/ m²/day), oxygen permeability >8.2 mg/mL, MTT confirmed good biocompatibility and sufficient tensile strength (17.53 ± 1.9) for being used as a wound dressing. Nonetheless, KR-PL-PVA membranes show controlled CTX release due to enriched hydrophilic moieties which protect the wound from getting infected. In vivo results depict that CTX-KR-PL-PVA membrane group shows a rapid wound closure rate (p < 0.05) with appreciable angiogenesis, accelerated re-epithelization, and excessive collagen deposition at the wound site. These results endorsed that CTX-KR-PL-PVA hydrogel membranes are potential candidates for being used as dressing material in the diabetic wound.

Sustainable Applications of Animal Waste Proteins

Currently, the growth of the global population leads to an increase in demand for agricultural products. Expanding the obtaining and consumption of food products results in a scale up in the amount of by-products formed, the development of processing methods for which is becoming an urgent task of modern science. Collagen and keratin make up a significant part of the animal origin protein waste, and the potential for their biotechnological application is almost inexhaustible. The specific fibrillar structure allows collagen and keratin to be in demand in bioengineering in various forms and formats, as a basis for obtaining hydrogels, nanoparticles and scaffolds for regenerative medicine and targeted drug delivery, films for the development of biodegradable packaging materials, etc. This review describes the variety of sustainable sources of collagen and keratin and the beneficial application multiformity of these proteins.

Synthesis of Silica-Based Boron-Incorporated Collagen/Human Hair Keratin Hybrid Cryogels with the Potential Bone Formation Capability

Tissue engineering and regenerative medicine have evolved into a different concept, the so-called clinical tissue engineering. Within this context, the synthesis of next-generation inorganic-organic hybrid constructs without the use of chemical crosslinkers emerges with a great potential for treating bone defects. Here, we propose a sophisticated approach for synthesizing cost-effective boron (B)- and silicon (Si)-incorporated collagen/hair keratin (B-Si-Col-HK) cryogels with the help of sol-gel reactions. In this approach, collagen and hair keratin were engaged with a B-Si network using tetraethyl orthosilicate as a silica precursor, and the obtained cryogels were characterized in depth with attenuated total reflectance-Fourier transform infrared spectroscopy, solid-state NMR, X-ray diffraction, thermogravimetric analysis, porosity and swelling tests, Brunauer-Emmett-Teller and Barrett-Joyner-Halenda analyses, frequency sweep and temperature-dependent rheology, contact angle analysis, micromechanical tests, and scanning electron microscopy with energy dispersive X-ray analysis. In addition, the cell survival and osteogenic features of the cryogels were evaluated by the MTS test, live/dead assay, immuno/histochemistry, and quantitative real-time polymerase chain reaction analyses. We conclude that the B-Si-networked Col-HK cryogels having good mechanical durability and osteoinductive features would have the potential bone formation capability.

Photodynamic Eradication of Trichophyton rubrum and Candida albicans

Conventional methods of onychomycosis treatment are ineffective in some cases because the cure of onychomycosis very often depends on the patient’s individual response to the treatment; therefore, there is a crucial need to research and develop new methods of onychomycosis therapy. One of the most innovative treatments is photodynamic therapy (PDT) using photosensitizers (PSs). However, effective treatment depends on the correct choice of photosensitizer and substances that improve the characteristics of the final formulation. The aim of our work was to find an effective formulation for the treatment of onychomycosis. To achieve this goal, we tested the effect of three types of PSs, rose Bengal (RB), malachite green oxalate (MGO), and methylene blue (MB), on Candida albicans. The most effective PS was RB, and so the study was continued with Trichophyton rubrum. Additional comparative studies were carried out on substances included in the formulation (urea and thiourea), focusing on their antifungal activity, which can improve penetration through the nail plate. The composition of the formulation that achieved 100% eradication of Trichophyton rubrum under our conditions consisted of 150 μM RB, 5% urea, and 0.5% thiourea in glycerol/water (70/30%, w/w) solution. A white luminescent lamp was used as a light source (1.9 ± 0.1 mW cm⁻²). Stability of the formulation was checked. The selected formulation shows potential for future simplification and acceleration of PDT treatment of onychomycosis.

Raman Spectroscopy, X-ray Diffraction, and Scanning Electron Microscopy as Noninvasive Methods for Microstructural Alterations in Psoriatic Nails

Psoriasis is a chronic inflammatory disease associated with immune system dysfunction that can affect nails, with a negative impact on patient life quality. Usually, nail psoriasis is associated with skin psoriasis and is therefore relatively simple to diagnose. However, up to 10% of nail psoriasis occurs isolated and may be difficult to diagnose by means of current methods (nail biopsy, dermoscopy, video dermoscopy, capillaroscopy, ultrasound of the nails, etc.). Since the nail is a complex biological tissue, mainly composes of hard α-keratins, the structural and morphological techniques can be used to analyze the human fingernails. The aim of this study was to corroborate the information obtained using Raman spectroscopy with those obtained by scanning electron microscopy (SEM) and X-ray diffractometry and to assess the potential of these techniques as non-invasive dermatologic diagnostic tools and an alternative to current methods.