Assessment of a Novel Adult Mass-Rearing Cage for Aedes albopictus (Skuse) and Anopheles arabiensis (Patton)

Requirements for market entry of gene drive-modified mosquitoes for control of vector-borne diseases: analogies to other biologic and biotechnology products

Gene drive-modified mosquitoes (GDMMs) are proposed as new tools for control and elimination of malaria and other mosquito-borne diseases, and promising results have been observed from testing conducted in containment. Although still at an early stage of development, it is important to begin now to consider approval procedures and market entry strategies for the eventual implementation of GDMMs in the context of disease control programs, as these could impact future research plans. It is expected that, as for other types of new products, those seeking to bring GDMMs to market will be required to provide sufficient information to allow the regulator(s) to determine whether the product is safe and effective for its proposed use. There already has been much emphasis on developing requirements for the biosafety components of the "safe and effective" benchmark, largely concerned with their regulation as genetically modified organisms. Other potential approval requirements have received little attention, however. Although GDMMs are expected to be implemented primarily in the context of public health programs, any regulatory analogies to other public health products, such as pharmaceuticals, vaccines, or chemical pesticides, must take into account the characteristics of live mosquito products. Typical manufacturing standards related to product identity, potency or quality will need to be adapted to GDMMs. Valuable lessons can be drawn from the regulatory approval processes for other whole organism and genetically modified (GM) organism products. Supply chain requirements, such as scale of production, location and design of production facilities, and methods of distribution and delivery, will be dependent upon the characteristics of the particular GDMM product, the conditions of use, and the region to be served. Plans for fulfilling supply chain needs can build upon experience in the development of other live insect products for use in public health and agriculture. Implementation of GDMMs would benefit from additional research on enabling technologies for long-term storage of mosquito life stages, efficient mass production, and area-wide delivery of GDMMs. Early consideration of these practical requirements for market entry will help to mitigate downstream delays in the development of these promising new technologies.

Response of male adult Aedes mosquitoes to gamma radiation in different nitrogen environments

The developmental stage of the mosquito is one of the main factors that affect its response to ionizing radiation. Irradiation of adults has been reported to have beneficial effects. However, the main challenge is to immobilize and compact a large number of adult male mosquitoes for homogenous irradiation with minimal deleterious effects on their quality. The present study investigates the use of nitrogen in the irradiation of adult Aedes albopictus and Ae. aegypti. Irradiation in nitrogen (N₂) and in air after being treated with nitrogen (PreN₂) were compared with irradiation in air at gamma radiation doses of 0, 55, 70, 90, 110, and 125 Gy. In both species, approximately 0% egg hatch rate was observed following doses above 55 Gy in air versus 70 Gy in PreN₂ and 90 Gy in N₂. Males irradiated at a high mosquito density showed similar egg hatch rates as those irradiated at a low density. Nitrogen treatments showed beneficial effects on the longevity of irradiated males for a given dose, revealing the radioprotective effect of anoxia. However, irradiation in N₂ or PreN₂ slightly reduced the male flight ability. Nitrogen treatment was found to be a reliable method for adult mosquito immobilization. Overall, our results demonstrated that nitrogen may be useful in adult Aedes mass irradiation. The best option seems to be PreN₂ since it reduces the immobilization duration and requires a lower dose than that required in the N₂ environment to achieve full sterility but with similar effects on male quality. However, further studies are necessary to develop standardized procedures including containers, time and pressure for flushing with nitrogen, immobilization duration considering mosquito species, age, and density.

Strain Characterisation for Measuring Bioefficacy of ITNs Treated with Two Active Ingredients (Dual-AI ITNs): Developing a Robust Protocol by Building Consensus

Durability monitoring of insecticide-treated nets (ITNs) containing a pyrethroid in combination with a second active ingredient (AI) must be adapted so that the insecticidal bioefficacy of each AI can be monitored independently. An effective way to do this is to measure rapid knock down of a pyrethroid-susceptible strain of mosquitoes to assess the bioefficacy of the pyrethroid component and to use a pyrethroid-resistant strain to measure the bioefficacy of the second ingredient. To allow robust comparison of results across tests within and between test facilities, and over time, protocols for bioefficacy testing must include either characterisation of the resistant strain, standardisation of the mosquitoes used for bioassays, or a combination of the two. Through a series of virtual meetings, key stakeholders and practitioners explored different approaches to achieving these goals. Via an iterative process we decided on the preferred approach and produced a protocol consisting of characterising mosquitoes used for bioefficacy testing before and after a round of bioassays, for example at each time point in a durability monitoring study. We present the final protocol and justify our approach to establishing a standard methodology for durability monitoring of ITNs containing pyrethroid and a second AI.

Adult mosquito predation and potential impact on the sterile insect technique

The sterile insect technique is a promising environmentally friendly method for mosquito control. This technique involves releasing laboratory-produced sterile males into a target field site, and its effectiveness may be affected by the extent of adult mosquito predation. Sterile males undergo several treatments. Therefore, it is vital to understand which treatments are essential in minimizing risks to predation once released. The present study investigates the predation propensity of four mantis species (Phyllocrania paradoxa, Hymenopus coronatus, Blepharopsis mendica, Deroplatys desiccata) and two gecko species (Phelsuma standingi, P. laticauda) on adult Aedes aegypti, Ae. albopictus and Anopheles arabiensis mosquitoes in a laboratory setting. First, any inherent predation preferences regarding mosquito species and sex were evaluated. Subsequently, the effects of chilling, marking, and irradiation, on predation rates were assessed. The selected predators effectively preyed on all mosquito species regardless of the treatment. Predation propensity varied over days for the same individuals and between predator individuals. Overall, there was no impact of laboratory treatments of sterile males on the relative risk of predation by the test predators, unless purposely exposed to double the required sterilizing irradiation dose. Further investigations on standardized predation trials may lead to additional quality control tools for irradiated mosquitoes.

The Insect Pest Control Laboratory of the Joint FAO/IAEA Programme: Ten Years (2010-2020) of Research and Development, Achievements and Challenges in Support of the Sterile Insect Technique

The Joint FAO/IAEA Centre (formerly called Division) of Nuclear Techniques in Food and Agriculture was established in 1964 and its accompanying laboratories in 1961. One of its subprograms deals with insect pest control, and has the mandate to develop and implement the sterile insect technique (SIT) for selected key insect pests, with the goal of reducing the use of insecticides, reducing animal and crop losses, protecting the environment, facilitating international trade in agricultural commodities and improving human health. Since its inception, the Insect Pest Control Laboratory (IPCL) (formerly named Entomology Unit) has been implementing research in relation to the development of the SIT package for insect pests of crops, livestock and human health. This paper provides a review of research carried out between 2010 and 2020 at the IPCL. Research on plant pests has focused on the development of genetic sexing strains, characterizing and assessing the performance of these strains (e.g., Ceratitis capitata), elucidation of the taxonomic status of several members of the Bactrocera dorsalis and Anastrepha fraterculus complexes, the use of microbiota as probiotics, genomics, supplements to improve the performance of the reared insects, and the development of the SIT package for fruit fly species such as Bactrocera oleae and Drosophila suzukii. Research on livestock pests has focused on colony maintenance and establishment, tsetse symbionts and pathogens, sex separation, morphology, sterile male quality, radiation biology, mating behavior and transportation and release systems. Research with human disease vectors has focused on the development of genetic sexing strains (Anopheles arabiensis, Aedes aegypti and Aedes albopictus), the development of a more cost-effective larvae and adult rearing system, assessing various aspects of radiation biology, characterizing symbionts and pathogens, studying mating behavior and the development of quality control procedures, and handling and release methods. During the review period, 13 coordinated research projects (CRPs) were completed and six are still being implemented. At the end of each CRP, the results were published in a special issue of a peer-reviewed journal. The review concludes with an overview of future challenges, such as the need to adhere to a phased conditional approach for the implementation of operational SIT programs, the need to make the SIT more cost effective, to respond with demand driven research to solve the problems faced by the operational SIT programs and the use of the SIT to address a multitude of exotic species that are being introduced, due to globalization, and established in areas where they could not survive before, due to climate change.

Sterile Insect Technique in an Integrated Vector Management Program against Tiger Mosquito Aedes albopictus in the Valencia Region (Spain): Operating Procedures and Quality Control Parameters

Aedes albopictus and Aedes aegypti are the main vectors of arboviral diseases such as dengue, Zika and chikungunya viruses. About a third of the world population is currently at risk of contracting Aedes-borne epidemics. In recent years, A. albopictus has drastically increased its distribution in many countries. In the absence of efficient mosquito vector control methods, the sterile insect technique (SIT) is presented as a very promising and environment-friendly control tool. The Agriculture Department of the Valencian Region is promoting an ongoing pilot project to evaluate the efficacy of an integrated vector management program (IVM) based on the use of the SIT as the main method of control. The laboratory studies for evaluating the entomological efficacy of SIT through the phased conditional testing process recommended by World Health Organization and the International Atomic Energy Agency (WHO-IAEA) are addressed. This study describes the routine operating procedures and quality control parameters for the medium-scale rearing of sterile male A. albopictus. More than 15 million sterile males have been produced and released in an area of 80 ha between 2018 and 2020. Of the initial L1 larvae, we recovered 17.2% of male pupae after sex sorting to be sterilized and released on the field, while the rest of the pupae remained available to maintain the rearing colony. The residual percentage of females after sex sorting was on average 0.17%. The obtained values in terms of production and quality control as well as the proposed rearing methodology can be useful for designing a medium-scale mosquito-rearing pipeline.