Adsorption and Release Properties of Drug Delivery System Naproxen-SBA-15: Effect of Surface Polarity, Sodium/Acid Drug Form and pH

pH-responsive Aminated mesoporous silica microspheres modified with soybean hull polysaccharides for curcumin encapsulation and controlled release

Mesoporous silica microspheres (MSMs) possess poor biocompatibility. This study focuses on integrating MSMs with polymers to obtain hybrid materials with superior performance compared to the individual components and responsive release in specific environments. The synthesized MSMs were aminated, and subsequently, soybean hull polysaccharide (SHPs) was modified onto MSMs-NH2 to produce MSMs-NH2@SHPs nanoparticles. The encapsulation rate, loading rate of curcumin (Cur), and in vitro release behavior were investigated. Results indicated that the encapsulation efficiency of Cur by MSMs-NH2@SHPs nanoparticles reached 75.58%, 6.95 times that of MSMs-NH2 with a load capacity of 35.12%. It is noteworthy that these nanoparticles exhibit pH-responsive release capacity in vitro. The cumulative release rate of the three nanoparticles at pH 5.0 was higher than that at pH 7.4. MSMs-NH2@SHPs had a cumulative release rate of 56.55% at pH 7.4, increasing to 76.21% at pH 5.0. In vitro experiments have shown that MSMs-based nanoparticles have high delivery efficiency and can achieve pH-sensitive drug release, with a high release rate in a slightly acidic acid, highlighting the potential for controlled release of Cur.

Important role of pore-filling mechanism in separating naproxen from water by micro-mesoporous carbonaceous material

Commercial micro-mesoporous carbonaceous material (MCM; 56.8% mesopores) was applied for investigating the removal phenomenon of naproxen drug in aqueous solutions through batch adsorption experiments. Results demonstrated that the adsorption capacity of MCM to naproxen was slightly affected by different pHeq (2.0-11) and ionic strength (0-1 M NaCl). Adsorption kinetics, isotherms, thermodynamics, and mechanisms were evaluated at pH 7.0. Adsorption kinetics indicated the rate constants for adsorption (0.2 × 10-3  L/(mg × min) and desorption (0.076/min) and the adsorption equilibrium constant (2.6 × 10-3  L/mg). Adsorption isotherm showed that MCM exhibited a high-affinity adsorption capacity to naproxen (even at low concentrations) and its Langmuir maximum adsorption capacity (Qmax ) was 252.7 mg/g at 25°C. Adsorption thermodynamics proved that the adsorption process was endothermic and physisorption (ΔH° = 9.66 kJ/mol). The analysis result of pore size distribution demonstrated that the internal pore structure of MCM was appropriate for adsorbing naproxen molecules. Pore-filing mechanism (pore diffusion phenomenon) was confirmed by a considerable decrease in BET-surface area (585 m2 /g) and total pore volume (0.417 cm3 /g) of MCM after adsorbing naproxen (~1000 mg/L and pH 7.0) at 5 min (341 and 0.256), 60 min (191 and 0.205), 120 min (183 and 0.193), 360 min (144 and 0.175), and 24 h (71.6 m2 /g and 0.123 cm3 /g, respectively). The pore diffusion occurred rapidly (even at the initial adsorption period of 5 min). The FTIR technique was applied to identify the existence of C-H···π and n-π interaction. π-π interaction (evaluated through ID /IG ratio and C=C band) played a minor contribution in adsorption mechanisms. The ID /IG ratio (determined by the Raman technique) of MCM before adsorption (1.195) was similar to that after adsorption (1.190), and the wavenumber (C=C band; its FTIR spectrum) slightly shifted from 1638 to 1634 cm-1 after adsorption. A decrease in the Qmax value of MCM from 249 to 217 (H2 O2 -oxidized MCM) or to 224 mg/g (HNO3 -oxidized MCM) confirmed the presence of π-π interaction. Electrostatic attraction was a minor contribution. MCM can serve as a promising material for removing naproxen from water environment through a pore-filling mechanism. PRACTITIONER POINTS: Pore-filling mechanism was proposed by comparing textural properties of MCM before and after adsorbing naproxen. C-H···π and n-π interactions were identified via FTIR technique. π-π interaction was observed by FTIR and Raman techniques. Oxidation of MCM with HNO3 or H2 O2 was a helpful method to explore π-π interaction. Electrostatic attraction was explained through studies: effects of pH and NaCl along with desorption.

Acid treatment for enhancing Hg0 removal efficiency of chlorine-loaded biochar: mechanism and kinetic analysis

Adsorbents modified solely with chlorine have limited effectiveness in removing mercury at high temperatures. This study aims to investigate the influence of various acid (HNO3, H2SO4, and H2O2) loadings on the removal efficiency of mercury from NH4Cl-modified adsorbents. The objective is to develop rice straw carbon adsorbents that are both more efficient and cost-effective. The experiments were conducted on a fixed bed experimental platform, with SEM and BET to observe the physical property changes of the modified char samples. XPS analysis was employed to analyze the effects of oxygen, chlorine, and sulfur functional groups. Additionally, a kinetic model was used to investigate the interaction mechanism between the adsorbent and mercury. The findings demonstrate that co-modification surpasses the use of NH4Cl alone, with the combination of NH4Cl and HNO3 yielding the best results. Co-modification enhances the development of a more refined and compact pore structure on the char surface, promoting the physical adsorption of mercury. Moreover, an increased presence of chlorine and oxygen functional groups is observed on the char surface, particularly in the NH4Cl and HNO3 co-modified samples, further enhancing the chemical adsorption capacity of the char. The results from the kinetic analysis support this conclusion. Furthermore, the adsorption process of Hg0 relies on both external mass transfer and chemical adsorption, with the chemical adsorption process playing a more significant role as the controlling factor.

Effective transport of aggregated hypericin encapsulated in SBA-15 nanoporous silica particles for photodynamic therapy of cancer cells

Photodynamic therapy (PDT) represents an interesting modality for the elimination of damaged biomaterials and cells. This treatment takes advantage of the photosensitizing properties of molecules that are active only when irradiated with light. In the present work, a dual property of hypericin, a hydrophobic molecule with high performance in photodiagnostics and photodynamic therapy, was exploited. The non-fluorescent and photodynamically inactive form of hypericin aggregates was loaded into the nanopores of SBA-15 silica particles. The synthesized particles were characterized by infrared spectroscopy, thermogravimetry, differential thermal analysis, small-angle X-ray scattering and transmission electron microscopy. Hypericin aggregates were confirmed by absorption spectra typical of aggregated hypericin and by its short fluorescence lifetime. Release of hypericin from the particles was observed toward serum proteins, mimicking physiological conditions. Temperature- and time-dependent uptake of hypericin by cancer cells showed gradual release of hypericin from the particles and active cellular transport by endocytosis. A closer examination of SBA-15-hypericin uptake by fluorescence lifetime imaging showed that aggregated hypericin molecules, characterized by a short fluorescence lifetime (∼4 ns), were still present in the SBA-15 particles upon uptake by cells. However, monomerization of hypericin in cancer cells was observed by extending the hypericin fluorescence lifetime by ∼8 ns, preferentially in lipid compartments and the plasma membrane. This suggests a promising prognosis for delayed biological activity of the entire cargo, which was confirmed by effective PDT in vitro. In summary, this work presents an approach for safe, inactive delivery of hypericin that is activated at the target site in cells and tissues.

Redistribution of hydrophobic hypericin from nanoporous particles of SBA-15 silica in vitro, in cells and in vivo

Nanoporous silica is nowadays used in various fields of nano- and micro-materials research. The advantage of nanoporous material is that it can be filled with various hydrophilic and hydrophobic molecules, which are then delivered to the target cells and tissues. In the present study, we have studied the interaction of nanoporous silica with hydrophobic and photodynamically active molecule - hypericin. Hypericin was adsorbed on/in SBA-15 silica, which led to the disappearance of its fluorescence due to hypericin aggregate formation. However, it was observed here that hypericin can be easily redistributed from these particles towards proteins and lipids in serum and cells in vitro and in vivo. Moreover, the charged surface character of SBA-15 pores forced the creation of protein/lipid corona on particles. Such complex enabled monomerization of hypericin on the surface of particles presented by fluorescence in the corona and singlet oxygen production suitable for photodynamic therapy (PDT). The PDT efficacy achieved by introducing the new construct into the PDT protocol was comparable to the efficacy of hypericin PDT. In conclusion, this study demonstrates a promising approach for the delivery of hydrophobic photosensitizers to cancer cells by nanoporous silica using fluorescence techniques.

Application of TGA/c-DTA for Distinguishing between Two Forms of Naproxen in Pharmaceutical Preparations

Naproxen is one of the most used non-steroidal anti-inflammatory drugs (NSAIDs). It is used to treat pain of various origins, inflammation and fever. Pharmaceutical preparations containing naproxen are available with prescription and over-the-counter (OTC). Naproxen in pharmaceutical preparations is used in the form of acid and sodium salt. From the point of view of pharmaceutical analysis, it is crucial to distinguish between these two forms of drugs. There are many costly and laborious methods to do this. Therefore, new, faster, cheaper and, at the same time, simple-to-perform identification methods are sought. In the conducted studies, thermal methods such as thermogravimetry (TGA) supported by calculated differential thermal analysis (c-DTA) were proposed to identify the type of naproxen in commercially available pharmaceutical preparations. In addition, the thermal methods used were compared with pharmacopoeial methods for the identification of compounds, such as high-performance liquid chromatography (HPLC), Fourier-transform infrared spectroscopy (FTIR), UV-Vis spectrophotometry, and a simple colorimetric analyses. In addition, using nabumetone, a close structural analog of naproxen, the specificity of the TGA and c-DTA methods was assessed. Studies have shown that the thermal analyses used are effective and selective in distinguishing the form of naproxen in pharmaceutical preparations. This indicates the potential possibility of using TGA supported by c-DTA as an alternative method.