Hydrophilicity, Viscoelastic, and Physicochemical Properties Variations in Dental Bone Grafting Substitutes

An Up-to-Date Review of Materials Science Advances in Bone Grafting for Oral and Maxillofacial Pathology

Bone grafting in oral and maxillofacial surgery has evolved significantly due to developments in materials science, offering innovative alternatives for the repair of bone defects. A few grafts are currently used in clinical settings, including autografts, xenografts, and allografts. However, despite their benefits, they have some challenges, such as limited availability, the possibility of disease transmission, and lack of personalization for the defect. Synthetic bone grafts have gained attention since they have the potential to overcome these limitations. Moreover, new technologies like nanotechnology, 3D printing, and 3D bioprinting have allowed the incorporation of molecules or substances within grafts to aid in bone repair. The addition of different moieties, such as growth factors, stem cells, and nanomaterials, has been reported to help mimic the natural bone healing process more closely, promoting faster and more complete regeneration. In this regard, this review explores the currently available bone grafts, the possibility of incorporating substances and molecules into their composition to accelerate and improve bone regeneration, and advanced graft manufacturing techniques. Furthermore, the presented current clinical applications and success stories for novel bone grafts emphasize the future potential of synthetic grafts and biomaterial innovations in improving patient outcomes in oral and maxillofacial surgery.

Biphasic bone substitutes coated with PLGA incorporating therapeutic ions Sr2+ and Mg2+: cytotoxicity cascade and in vivo response of immune and bone regeneration

The incorporation of bioactive ions into biomaterials has gained significant attention as a strategy to enhance bone tissue regeneration on the molecular level. However, little knowledge exists about the effects of the addition of these ions on the immune response and especially on the most important cellular regulators, the macrophages. Thus, this study aimed to investigate the in vitro cytocompatibility and in vivo regulation of bone remodeling and material-related immune responses of a biphasic bone substitute (BBS) coated with metal ions (Sr2+/Mg2+) and PLGA, using the pure BBS as control group. Initially, two cytocompatible modified material variants were identified according to the in vitro results obtained following the DIN EN ISO 10993-5 protocol. The surface structure and ion release of both materials were characterized using SEM-EDX and ICP-OES. The materials were then implanted into Wistar rats for 10, 30, and 90 days using a cranial defect model. Histopathological and histomorphometrical analyses were applied to evaluate material degradation, bone regeneration, osteoconductivity, and immune response. The findings revealed that in all study groups comparable new bone formation were found. However, during the early implantation period, the BBS_Sr2+ group exhibited significantly faster regeneration compared to the other two groups. Additionally, all materials induced comparable tissue and immune responses involving high numbers of both pro-inflammatory macrophages and multinucleated giant cells (MNGCs). In conclusion, this study delved into the repercussions of therapeutic ion doping on bone regeneration patterns and inflammatory responses, offering insights for the advancement of a new generation of biphasic calcium phosphate materials with potential clinical applicability.

Influence of physicochemical characteristics of calcium phosphate-based biomaterials in cranio-maxillofacial bone regeneration. A systematic literature review and meta-analysis of preclinical models

Objectives

Calcium phosphate-based biomaterials (CaP) are the most widely used biomaterials to enhance bone regeneration in the treatment of alveolar bone deficiencies, cranio-maxillofacial and periodontal infrabony defects, with positive preclinical and clinical results reported. This systematic review aimed to assess the influence of the physicochemical properties of CaP biomaterials on the performance of bone regeneration in preclinical animal models.

Methods

The PubMed, EMBASE and Web of Science databases were searched to retrieve the preclinical studies investigating physicochemical characteristics of CaP biomaterials. The studies were screened for inclusion based on intervention (physicochemical characterization and in vivo evaluation) and reported measurable outcomes.

Results

A total of 1532 articles were retrieved and 58 studies were ultimately included in the systematic review. A wide range of physicochemical characteristics of CaP biomaterials was found to be assessed in the included studies. Despite a high degree of heterogeneity, the meta-analysis was performed on 39 studies and evidenced significant effects of biomaterial characteristics on their bone regeneration outcomes. The study specifically showed that macropore size, Ca/P ratio, and compressive strength exerted significant influence on the formation of newly regenerated bone. Moreover, factors such as particle size, Ca/P ratio, and surface area were found to impact bone-to-material contact during the regeneration process. In terms of biodegradability, the amount of residual graft was determined by macropore size, particle size, and compressive strength.

Conclusion

The systematic review showed that the physicochemical characteristics of CaP biomaterials are highly determining for scaffold's performance, emphasizing its usefulness in designing the next generation of bone scaffolds to target higher rates of regeneration.

A comparative analysis of particulate bovine bone substitutes for oral regeneration: a narrative review

PURPOSE

Particulate bovine bone substitutes (BS) are commonly used in oral regeneration. However, more literature is needed focusing on comparative analyses among various particulate bovine BS. This study evaluates pre-clinical and clinical data of different particulate bovine BS in oral regeneration.

METHODS

A narrative review was conducted by screening the PubMed database Included in the review were pre-clinical and clinical studies until 2024 comparing a minimum of two distinct particulate bovine BS. In addition to examining general data concerning manufacturing and treatment processes, biological safety, physical and chemical characteristics, and graft resorption, particular emphasis was placed on assessing pre-clinical and clinical data related to ridge preservation, sinus floor elevation, peri-implant defects, and various forms of alveolar ridge augmentation utilizing particulate bovine BS.

RESULTS

Various treatment temperatures ranging from 300 to 1,250 °C and the employment of chemical cleaning steps were identified for the manufacturing process of particulate bovine BS deemed to possess biosecurity. A notable heterogeneity was observed in the physical and chemical characteristics of particulate bovine BS, with minimal or negligible graft resorption. Variations were evident in particle and pore sizes and the porosity of particulate bovine BS. Pre-clinical assessments noted a marginal inclination towards favorable outcomes for particulate bovine BS subjected to higher treatment temperatures. However, clinical data are insufficient. No distinctions were observed regarding ridge preservation, while slight advantages were noted for high-temperature treated particulate bovine BS in sinus floor elevation.

CONCLUSIONS

Subtle variances in both pre-clinical and clinical outcomes were observed in across various particulate bovine BS. Due to inadequate data, numerous considerations related to diverse particulate bovine BS, including peri-implant defects, must be more conclusive. Additional clinical studies are imperative to address these knowledge gaps effectively.

The response of human osteoblasts on bovine xenografts with and without hyaluronate used in bone augmentation

The aim of the in vitro study was to asses the effect of hyaluronate in conjunction with bovine derived xenografts on the viability, proliferation on day 4, 7 and 10, expression of early osteogenic differentiation marker Alkaline phosphatase on day 14 and 21, collagen, calcium deposition on day 14, 21 and 28 and cellular characteristics, as assessed through live cell image analysis, confocal laser scanning microscopy and scanning electron microscopy, in primary human osteoblasts compared to three bovine xenografts without hyaluronate. All experiments were performed in triplicates. Data were compared between groups and timepoints using one-way analysis of variance (ANOVA). Bonferroni post hoc test were further used for multiple comparison between groups (p < .05) An increase in cell viability (p < .05) and enhanced ALP activity was observed in all xenografts. Specimens containing hyaluronate showed a highest significant difference (23755 ± 29953, p < .0001). The highest levels of calcium (1.60 ± 0.30) and collagen (1.92 ± 0.09, p < .0001) deposition were also observed with hyaluronate loaded groups. The osteoblasts were well attached and spread on all xenograft groups. However, a higher number of cells were observed with hyaluronate functionalized xenograft (76.27 ± 15.11, (p < .0001) in live cell image analysis and they migrated towards the graft boundaries. The biofunctionalization of xenografts with hyaluronate improves their in vitro performance on human osteoblasts. This suggests that hyaluronate might be able to improve the bone regeneration when using such xenografts.

Biological performance of a novel bovine hydroxyapatite in a guided bone regeneration model: A preclinical study in a mandibular defect in dogs

OBJECTIVES

This preclinical model study aims to evaluate the performance and safety of a novel hydroxyapatite biomaterial (Wishbone Hydroxyapatite, WHA) on guided bone regeneration compared to a commercially available deproteinized bovine bone mineral (Bio-Oss, BO).

MATERIAL AND METHODS

Twenty-four beagle dogs were allocated to three timepoint cohorts (4, 12, and 26 weeks) of eight animals each. In all animals, four critical-sized, independent wall mandibular defects were created (32 defects/cohort). Each animal received all four treatments, allocated randomly to separated defects: WHA + collagen membrane (M), BO + M, no treatment (Sham, Sh), and Sh + M. At each timepoint, the specimens were harvested for histologic and histomorphometric analyses to determine the newly formed bone and osteoconductivity.

RESULTS

At 4 weeks, bone regeneration was significantly higher for WHA + M (46.8%) when compared to BO + M (21.4%), Sh (15.1%), and Sh + M (23.1%) (p < 0.05); at 12 and 26 weeks, regeneration was similar for WHA and BO. Bone-to-material contact increased over time similarly for WHA + M and BO + M. From a safety point of view, inflammation attributed to WHA + M or BO + M was minimal; necrosis or fatty infiltrate was absent.

CONCLUSIONS

WHA + M resulted in higher bone regeneration rate than BO + M at 4 weeks. Both BO + M and WHA + M were more efficient than both Sh groups at all timepoints. Safety and biocompatibility of WHA was favorable and comparable to that of BO.

Horizontal and Vertical Defect Management with a Novel Degradable Pure Magnesium Guided Bone Regeneration (GBR) Membrane-A Clinical Case

Background and objectives: In guided bone regeneration (GBR), large defects comprising both horizontal and vertical components usually require additional mechanical support to stabilize the augmentation and preserve the bone volume. This additional support is usually attained by using non-resorbable materials. A recently developed magnesium membrane presents the possibility of providing mechanical support whilst being completely resorbable. The aim of this case report was to describe the application and outcome of the magnesium membrane in combination with a collagen pericardium membrane for GBR. Materials and methods: A 74 year old, in an otherwise good general health condition, was presented with stage 2 grade A periodontitis and an impacted canine. After extraction of the impacted canine, a defect was created with both vertical and horizontal components. The defect was augmented using the magnesium membrane to create a supportive arch to the underlying bone graft and a collagen pericardium membrane was placed on top to aid with the soft tissue closure. Results: Upon reentry at 8 months, complete resorption of the magnesium devices was confirmed as there were no visible remnants remaining. A successful augmentation outcome had been achieved as the magnesium membrane in combination with the collagen membrane had maintained the augmented bone well. Two dental implants could be successfully placed in the healed augmentation. Conclusions: In this case, the magnesium membrane in combination with a collagen pericardium membrane presented a potentially viable alternative treatment to titanium meshes or titanium-reinforced membranes for the augmentation of a defect with both horizontal and vertical components that is completely resorbable. It was demonstrated that it is possible to attain a good quality and quantity of bone using a resorbable system that has been completely resorbed by the time of reentry.

First Clinical Case Report of a Xenograft-Allograft Combination for Alveolar Ridge Augmentation Using a Bovine Bone Substitute Material with Hyaluronate (Cerabone® Plus) Combined with Allogeneic Bone Granules (Maxgraft®)

BACKGROUND

A patient had lost the first left maxillary incisor in the esthetic zone.

METHODS

The defect in the alveolar ridge was reconstructed for an implant-supported restoration using a new xenogeneic bone substitute containing hyaluronate, which was used in combination with allogeneic bone granules.

RESULTS

After three years of follow-up, the dental implant was stable and showed no signs of infection.

CONCLUSIONS

This is the first case report with a long-term follow-up time of three years of a successful clinical application of a xenograft-allograft combination (cerabone® plus combined with maxgraft®) for alveolar ridge augmentation before dental implantation. Cerabone® plus offers volume stability, provides reliable and efficient structural support of the oral soft tissues in the augmented region (particularly crucial in the aesthetic zone), and preserves the alveolar ridge shape.

Evaluation between Biodegradable Magnesium Metal GBR Membrane and Bovine Graft with or without Hyaluronate

Bone substitutes and barrier membranes are widely used in dental regeneration procedures. New materials are constantly being developed to provide the most optimal surgical outcomes. One of these developments is the addition of hyaluronate (HA) to the bovine bone graft, which has beneficial wound healing and handling properties. However, an acidic environment that is potentially produced by the HA is known to increase the degradation of magnesium metal. The aim of this study was to evaluate the potential risk for the addition of HA to the bovine bone graft on the degradation rate and hence the efficacy of a new biodegradable magnesium metal GBR membrane. pH and conductivity measurements were made in vitro for samples placed in phosphate-buffered solutions. These in vitro tests showed that the combination of the bovine graft with HA resulted in an alkaline environment for the concentrations that were used. The combination was also tested in a clinical setting. The use of the magnesium metal membrane in combination with the tested grafting materials achieved successful treatment in these patients and no adverse effects were observed in vivo for regenerative treatments with or without HA. Magnesium based biodegradable GBR membranes can be safely used in combination with bovine graft with or without hyaluronate.

Bone Grafts in Dental Medicine: An Overview of Autografts, Allografts and Synthetic Materials

This review provides an overview of various materials used in dentistry and oral and maxillofacial surgeries to replace or repair bone defects. The choice of material depends on factors such as tissue viability, size, shape, and defect volume. While small bone defects can regenerate naturally, extensive defects or loss or pathological fractures require surgical intervention and the use of substitute bones. Autologous bone, taken from the patient's own body, is the gold standard for bone grafting but has drawbacks such as uncertain prognosis, surgery at the donor site, and limited availability. Other alternatives for medium and small-sized defects include allografts (from human donors), xenografts (from animals), and synthetic materials with osteoconductive properties. Allografts are carefully selected and processed human bone materials, while xenografts are derived from animals and possess similar chemical composition to human bone. Synthetic materials such as ceramics and bioactive glasses are used for small defects but may lack osteoinductivity and moldability. Calcium-phosphate-based ceramics, particularly hydroxyapatite, are extensively studied and commonly used due to their compositional similarity to natural bone. Additional components, such as growth factors, autogenous bone, and therapeutic elements, can be incorporated into synthetic or xenogeneic scaffolds to enhance their osteogenic properties. This review aims to provide a comprehensive analysis of grafting materials in dentistry, discussing their properties, advantages, and disadvantages. It also highlights the challenges of analyzing in vivo and clinical studies to select the most suitable option for specific situations.

Analyses of the Cellular Interactions between the Ossification of Collagen-Based Barrier Membranes and the Underlying Bone Defects

Barrier membranes are an essential tool in guided bone Regeneration (GBR), which have been widely presumed to have a bioactive effect that is beyond their occluding and space maintenance functionalities. A standardized calvaria implantation model was applied for 2, 8, and 16 weeks on Wistar rats to test the interactions between the barrier membrane and the underlying bone defects which were filled with bovine bone substitute materials (BSM). In an effort to understand the barrier membrane’s bioactivity, deeper histochemical analyses, as well as the immunohistochemical detection of macrophage subtypes (M1/M2) and vascular endothelial cells, were conducted and combined with histomorphometric and statistical approaches. The native collagen-based membrane was found to have ossified due to its potentially osteoconductive and osteogenic properties, forming a “bony shield” overlying the bone defects. Histomorphometrical evaluation revealed the resorption of the membranes and their substitution with bone matrix. The numbers of both M1- and M2-macrophages were significantly higher within the membrane compartments compared to the underlying bone defects. Thereby, M2-macrophages significantly dominated the tissue reaction within the membrane compartments. Statistically, a correlation between M2-macropahges and bone regeneration was only found at 2 weeks post implantationem, while the pro-inflammatory limb of the immune response correlated with the two processes at 8 weeks. Altogether, this study elaborates on the increasingly described correlations between barrier membranes and the underlying bone regeneration, which sheds a light on the understanding of the immunomodulatory features of biomaterials.

The effects of nano-hydroxyapatite/polyamide 66 scaffold on dog femoral head osteonecrosis model: a preclinical study

The lack of mechanical support in the bone tunnel formed after CD often results in a poor therapeutic effect in ONFH. The n-HA/P66 has excellent biocompatibility and mechanical properties and has been widely used in bone regeneration. The present study aimed to evaluate the effects of n-HA/P66 scaffold treatment in a dog model of ONFH. A FEA was performed to analyze the mechanical changes in the femoral head after CD and n-HA/P66 scaffold or tantalum rod implantation. Fifteen male beagles were selected to establish the model of ONFH by liquid nitrogen freezing method, and the models were identified by x-ray and MRI 4 weeks after modeling and randomly divided into three groups. Nine weeks later, femoral head samples were taken for morphology, micro-CT, and histological examination. The FEA showed that the n-HA/P66 scaffold proved the structural support in the bone tunnel, similar to the tantalum rod. The morphology showed that the femoral head with n-HA/P66 implantation is intact, while the femoral heads in the model group and CD group are collapsing. Moreover, the micro-CT results of the n-HA/P66 scaffold group were better than the model group and the CD group, and the interface between the n-HA/P66 scaffold and bone tissue is blurred. Furthermore, the histological result also verifies the alterations in micro-CT, and bone tissue grows in the bone tunnel with n-HA/P66 scaffold implanted while few in the CD group. The CD results in a lack of mechanical support in the femoral head subchondral bone and bone tunnel high stress. The n-HA/P66 scaffold implantation can provide mechanical support and relieve high stress induced by CD. The n-HA/P66 scaffold can treat femoral head necrosis and provide the bone tissue growth scaffold for the femoral head after CD to promote bone tissue regeneration.

Differences in Mechanical and Physicochemical Properties of Several PTFE Membranes Used in Guided Bone Regeneration

Non-resorbable PTFE membranes are frequently used in dental-guided bone regeneration (GBR). However, there is a lack of detailed comparative studies that define variations among commonly used PTFE membranes in daily dental clinical practice. The aim of this study was to examine differences in physicochemical and mechanical properties of several recent commercial PTFE membranes for dental GBR (CytoplastTM TXT-200, permamem®, NeoGen®, Surgitime, OsseoGuard®-TXT, OsseoGuard®-NTXT). Such differences have been rarely recorded so far, which might be a reason for the varied clinical results. For that reason, we analyzed their surface architecture, chemical composition, tensile strength, Young's modulus, wettability, roughness, density, thickness and porosity. SEM revealed different microarchitectures among the non-textured membranes; the textured ones had hexagonal indentations and XPS indicated an identical spectral portfolio in all membranes. NeoGen® was determined to be the strongest and OsseoGuard®-TXT was the most elastic. Wettability and roughness were highest for Surgitime but lowest for OsseoGuard®-NTXT. Furthermore, permamem® was the thinnest and NeoGen® was identified as the thickest investigated GBR membrane. The defect volumes and defect volume ratio (%) varied significantly, indicating that permamem® had the least imperfect structure, followed by NeoGen® and then Cytoplast TM TXT-200. These differences may potentially affect the clinical outcomes of dental GBR procedures.

Plasma Electrolytic Polished Patient-Specific Orbital Implants in Clinical Use-A Technical Note

This technical note describes the technique of plasma electrolytic polishing on orbital patient-specific implants and demonstrates clinical handling and use by the insertion of a plasma electrolytic polished orbital implant into a patient.

Cellular Behaviors of Periodontal Ligament Stem Cells in the Presence of Bone Grafting Biomaterials, In-Vitro Study

Periodontal regeneration through the employment of bone substitutes has become a feasible strategy in animal and clinical studies. In this regard, we aimed to compare the periodontal ligament stem cell behavior in the vicinity of various bone grafting substitutes. Three types of popular bone substitutes, including allografts (Regen), xenografts (Cerabone), and alloplasts (Osteon) were studied in this experimental survey. The cellular attachment was assessed after four hours using the MTS assay and SEM imaging. In addition, cellular proliferation was investigated after 1, 3, 5, and 7 days through MTS assay. Osteogenesis was studied after 21 days of cell culture in a differentiation medium (DM+) and a normal medium (DM-), by employing real-time PCR and alizarin red staining. The highest cellular attachment was seen in the xenograft group with a significant difference in comparison to the other grafting materials. Despite the relatively low primary attachment of cells to allografts, the allograft group showed the highest total proliferation rate, while the lowest proliferation capacity was found in the alloplast group. Osteogenesis fount to be accelerated mostly by xenografts in both mediums (DM+ and DM-) after 3 weeks, while alloplasts showed the lowest osteogenesis. This study revealed that the type of bone substitutes used in regenerative treatments can affect cellular behavior and as a whole allografts and xenografts showed better results.

Frontiers of Hydroxyapatite Composites in Bionic Bone Tissue Engineering

Bone defects caused by various factors may cause morphological and functional disorders that can seriously affect patient's quality of life. Autologous bone grafting is morbid, involves numerous complications, and provides limited volume at donor site. Hence, tissue-engineered bone is a better alternative for repair of bone defects and for promoting a patient's functional recovery. Besides good biocompatibility, scaffolding materials represented by hydroxyapatite (HA) composites in tissue-engineered bone also have strong ability to guide bone regeneration. The development of manufacturing technology and advances in material science have made HA composite scaffolding more closely related to the composition and mechanical properties of natural bone. The surface morphology and pore diameter of the scaffold material are more important for cell proliferation, differentiation, and nutrient exchange. The degradation rate of the composite scaffold should match the rate of osteogenesis, and the loading of cells/cytokine is beneficial to promote the formation of new bone. In conclusion, there is no doubt that a breakthrough has been made in composition, mechanical properties, and degradation of HA composites. Biomimetic tissue-engineered bone based on vascularization and innervation show a promising future.

The allogeneic shell technique for alveolar ridge augmentation: a multicenter case series and experiences of more than 300 cases

PURPOSE

Allogeneic cortical bone plates (CP) might be used for alveolar ridge augmentation as an alternative to autogenous grafts (AG) and bone substitutes (BS). We report about a multicenter case series and our experiences of more than 300 cases using CP and the shell technique for reconstruction of the alveolar process to illustrate surgical key steps, variations, and complication management.

METHODS

Different types of alveolar ridge defects were augmented using the shell technique via CP. The space between the CP and the alveolar bone was filled with either autogenous or allogeneic granules (AUG, ALG) or a mixture of both. Implants were placed after 4-6 months. Microscopic and histological assessments were performed. In addition, space filling using AUG, ALG and bovine BS was discussed.

RESULTS

Scanning electron microscopy demonstrated the compact cortical structure of CP and the porous structure of ALG allowing micro-vessel ingrowth and bone remodeling. Histological assessment demonstrated sufficient bone remodeling and graft resorption after 4-6 months. In total, 372 CP cases and 656 implants were included to data analysis. The mean follow-up period was about 3.5 years. Four implants failed, while all implant failures were caused by peri-implantitis. Next, 30 CP complications were seen, while in 26 CP complications implant placement was possible. CP rehydration, stable positioning by adjusting screws, smoothing of sharp edges, and a tension-free wound closure were identified as relevant success factors. Space filling using ALG and a mixture of AUG/ALG resulted in sufficient bone remodeling, graft resorption and stability of the augmented bone.

CONCLUSIONS

CP and the shell technique is appropriate for alveolar ridge augmentation with adequate bone remodeling and low complication rates. Allografts can prevent donor site morbidity and therefore may decrease discomfort for the patient.

Influence of Xenogeneic and Alloplastic Carriers for Bone Augmentation on Human Unrestricted Somatic Stem Cells

Alloplastic and xenogeneic bone grafting materials are frequently used for bone augmentation. The effect of these materials on precursor cells for bone augmentation is yet to be determined. The aim of this study was to ascertain, in vitro, how augmentation materials influence the growth rates and viability of human unrestricted somatic stem cells. The biocompatibility of two xenogeneic and one alloplastic bone graft was tested using human unrestricted somatic stem cells (USSCs). Proliferation, growth, survival and attachment of unrestricted somatic stem cells were monitored after 24 h, 48 h and 7 days. Furthermore, cell shape and morphology were evaluated by SEM. Scaffolds were assessed for their physical properties by Micro-CT imaging. USSCs showed distinct proliferation on the different carriers. Greatest proliferation was observed on the xenogeneic carriers along with improved viability of the cells. Pore sizes of the scaffolds varied significantly, with the xenogeneic materials providing greater pore sizes than the synthetic inorganic material. Unrestricted somatic stem cells in combination with a bovine collagenous bone block seem to be very compatible. A scaffold’s surface morphology, pore size and bioactive characteristics influence the proliferation, attachment and viability of USSCs.

Sinus Mucosa Thinning and Perforations after Sinus Lifting Performed with Different Xenografts: A Histological Analysis in Rabbits

Background: Experimental studies have shown a progressive thinning and perforations of the sinus mucosa associated with sharpened edges and the cutting projections of graft particles used simultaneously for maxillary sinus augmentation. Hence, the aim of the present study was to evaluate the damaging effects of two different bovine grafts on the sinus mucosa after sinus augmentation. Methods: Twenty New Zealand rabbits received a bilateral sinus lifting using, as fillers, two different types of deproteinized bovine bone in granules, one processed at low temperature (low-T group), and the other at high temperature (high-T group). Thinned mucosa sites (<40 µm) and perforations were evaluated in the sinus mucosa that were in contact with graft granules after 2 and 10 weeks, in ten animals per period. Results: After 2 weeks of healing, the number of thinned mucosa sites was 118 in the low-T group, and 149 in the high-T group (p = 0.191). At the 10-week assessment, the thinned sites increased to 237 and 195 sites, respectively. The numbers of sinus mucosa perforations after 2 weeks were eight and three in the low-T and high-T group, respectively. At the 10-week evaluation, the perforations increased to 19 in the low-T group, and to 14 in the high-T group. Conclusions: The contact with bovine xenografts yielded thinning and perforations of the sinus mucosa. Despite the differences in characteristics and dimensions, no differences were found between the two xenografts in the numbers of thinning mucosa sites and perforations. However, a trend of more events was found in the low-T compared to the high-T group.

LED photobiomodulation therapy combined with biomaterial as a scaffold promotes better bone quality in the dental alveolus in an experimental extraction model

A bone scaffold added to the dental alveolus immediately after an extraction avoids bone atrophy and deformity at the tooth loss site, enabling rehabilitation with implants. Photobiomodulation accelerates bone healing by stimulating blood flow, activating osteoblasts, diminishing osteoclastic activity, and improving the integration of the biomaterial with the bone tissue. The aim of the present study was to evaluate the effect of photobiomodulation with LED at a wavelength of 850 nm on bone quality in Wistar rats submitted to molar extraction with and without a bone graft using hydroxyapatite biomaterial (Straumann® Cerabone®). Forty-eight rats were distributed among five groups (n = 12): basal (no interventions); control (extraction) (basal and control were the same animal, but at different sides); LED (extraction + LED λ = 850 nm); biomaterial (extraction + biomaterial), and biomaterial + LED (extraction + biomaterial + LED λ = 850 nm). Euthanasia occurred at 15 and 30 days after the induction of the extraction. The ALP analysis revealed an improvement in bone formation in the control and biomaterial + LED groups at 15 days (p = 0.0086 and p = 0.0379, Bonferroni). Moreover, the LED group had better bone formation compared to the other groups at 30 days (p = 0.0007, Bonferroni). In the analysis of AcP, all groups had less resorption compared to the basal group. Bone volume increased in the biomaterial, biomaterial + LED, and basal groups in comparison to the control group at 15 days (p < 0.05, t-test). At 30 days, the basal group had greater volume compared to the control and LED groups (p < 0.05, t-test). LED combined with the biomaterial improved bone formation in the histological analysis and diminished bone degeneration (demonstrated by the reduction in AcP), promoting an increase in bone density and volume. LED may be an important therapy to combine with biomaterials to promote bone formation, along with the other known benefits of this therapy, such as the control of pain and the inflammatory process.

In vitro resorbability and granular characteristics of 3D-printed hydroxyapatite granules versus allograft, xenograft, and alloplast for alveolar cleft surgery applications

Three-dimensionally printed hydroxyapatite (3DP HA) was investigated in regards to its functional properties supporting bone regeneration and tooth movement in alveolar cleft applications. Commercially available bovine xenograft (BXG), biphasic calcium phosphate alloplast (BCP), and two types of freeze-dried bone allograft granules (FDBA and FDBA-CMC) were employed as control samples. Degradability was studied by submerging the samples in pH 7.4 buffered solution at 37°C for 28 days and determining subsequent weight loss percentage. The wicking property and granular agglomeration were evaluated by putting the granules in contact with deionized water, blood, and phosphate-buffered saline (PBS). Both of FDBA and FDBA-CMC showed the greatest weight loss at 28 days followed by 3DP HA. In contrast, 3DP HA showed significantly greater wicking ability than other samples for all liquid types. FDBA-CMC exhibited the greatest granular agglomeration for all liquid types followed by 3DP HA. 3DP HA was found to be a favorable candidate for bone grafting in alveolar cleft treatment.

Cytocompatibility of Bone Substitute Materials and Membranes

BACKGROUND/AIM

With the demographic change and associated chronic bone loss, the need for cytocompatible bone replacement materials arise in modern medicine. The aim of this in vitro study was to investigate the cytocompatibility of eleven different bone substitute materials and membranes.

MATERIALS AND METHODS

Seven bone substitute materials and four membranes were assessed in vitro. The specimens were tested based on their interaction with MC3T3 pre-osteoblasts, through the utilization of viability, proliferation, and cytotoxicity assays. Cell vitality was evaluated using live-dead staining.

RESULTS

Although we found minor differences in cytocompatibility among the assessed materials, all tested materials can be considered as cytocompatible with a viability of more than 70% of the negative control, which indicates the non-toxic range as defined in current, international standards (DIN EN ISO 10993-5:2009, German Institute for Standardization, Berlin, Germany). Direct live-dead staining assays confirmed satisfactory cytocompatibility of all tested membranes.

CONCLUSION

All examined bone substitute materials and membranes were found to be cytocompatible. In order to assess whether the observed minor differences can impact regenerative processes, further in vivo studies need to be conducted.

The Influence of Hyaluronic Acid Biofunctionalization of a Bovine Bone Substitute on Osteoblast Activity In Vitro

Bovine bone substitute materials (BSMs) are used for oral bone regeneration. The objective was to analyze the influence of BSM biofunctionalization via hyaluronic acid (HA) on human osteoblasts (HOBs). BSMs with ± HA were incubated with HOBs including HOBs alone as a negative control. On days 3, 7 and 10, cell viability, migration and proliferation were analyzed by fluorescence staining, scratch wound assay and MTT assay. On days 3, 7 and 10, an increased cell viability was demonstrated for BSM+ compared with BSM- and the control (each p ≤ 0.05). The cell migration was enhanced for BSM+ compared with BSM- and the control after day 3 and day 7 (each p ≤ 0.05). At day 10, an accelerated wound closure was found for the control compared with BSM+/- (each p < 0.05). The highest proliferation rate was observed for BSM+ on day 3 (p ≤ 0.05) followed by BSM- and the control (each p ≤ 0.05). At day 7, a non-significantly increased proliferation was shown for BSM+ while the control was higher than BSM- (each p < 0.05). The least proliferation activity was observed for BSM- (p < 0.05) at day 10. HA biofunctionalization of the BSMs caused an increased HOB activity and might represent a promising alternative to BSM- in oral bone regeneration.

Scaffold-Type Structure Dental Ceramics with Different Compositions Evaluated through Physicochemical Characteristics and Biosecurity Profiles

The design and development of ceramic structures based on 3D scaffolding as dental bone substitutes has become a topic of great interest in the regenerative dentistry research area. In this regard, the present study focuses on the development of two scaffold-type structures obtained from different commercial dental ceramics by employing the foam replication method. At the same time, the study underlines the physicochemical features and the biological profiles of the newly developed scaffolds, compared to two traditional Cerabone^® materials used for bone augmentation, by employing both the in vitro Alamar blue proliferation test at 24, 48 and 96 h poststimulation and the in ovo chick chorioallantoic membrane (CAM) assay. The data reveal that the newly developed scaffolds express comparable results with the traditional Cerabone^® augmentation masses. In terms of network porosity, the scaffolds show higher pore interconnectivity compared to Cerabone^® granules, whereas regarding the biosafety profile, all ceramic samples manifest good biocompatibility on primary human gingival fibroblasts (HGFs); however only the Cerabone^® samples induced proliferation of HGF cells following exposure to concentrations of 5 and 10 µg/mL. Additionally, none of the test samples induce irritative activity on the vascular developing plexus. Thus, based on the current results, the preliminary biosecurity profile of ceramic scaffolds supports the usefulness for further testing of high relevance for their possible clinical dental applications.

The ultralong-term comparison of osteogenic behavior of three scaffolds with different matrices and degradability between one and two years

Attributed to their structure and composition manipulated to mimic natural bone tissue, porous scaffolds composed of inorganic nano-hydroxyapatite (n-HA) and organic polymers with different degrees of degradability have been proven to be a promising bone regeneration strategy. However, long-term and in-depth comparative research on the effects of scaffolds with different matrices and degrees of degradability on bone reconstruction is still lacking. In this study, the ultralong-term osteogenic performance of three polymeric composite scaffolds based on non-degradable polyamide 66 (PA66), slowly degradable polycaprolactone (PCL) and fast degradable poly (lactic-co-glycolic acid) (PLGA) were investigated comparatively after implanting the scaffolds into rabbit femoral defects for 12, 15, 18 and 21 months. The results demonstrated that the structural integrity of the scaffolds played a positive role in long-term bone reconstruction. Thus the n-HA/PA66 and n-HA/PCL scaffolds have a higher relative bone volume and bone density than the n-HA/PLGA scaffolds from 12 to 21 months. In addition, the favorable surface wettability and collagen-like molecular structure should endow the n-HA/PA66 scaffold with the best long-term osteogenic property among the three scaffolds. The ultralong-term comparative study reveals that a relatively stable scaffold integrity, together with favorable matrix molecular characteristics and hydrophilicity, may be more important for long-term osteogenesis besides the effect of scaffold pore structure, rather than the pursuit of fast scaffold degradation. The results also show that the space left by scaffold degradation is not easily occupied by new bone tissue, especially after bone tissue has formed a stable structure or the bone interface has become inert.

Pre-Treat Xenogenic Collagenous Blocks of Bone Substitutes with Saline Facilitate Their Manipulation and Guarantee High Bone Regeneration Rates, Qualitatively and Quantitatively

Deproteinized bovine bone mineral particles embedded in collagen (DBBM-C) are widely used for bone regenerations with excellent, albeit sometimes variable clinical outcomes. Clinicians usually prepare DBBM-C by mixing with blood. Replacing blood by saline represents an alternative. We investigated if saline treatment could improve DBBM-C i. handling in vitro and ii. biological performances in a rabbit calvarial model. In vitro, DBBM-C blocks soaked in saline or blood were submitted to compression tests. In vivo, four poly ether ether ketone (PEEK)cylinders were placed on 16 rabbit skulls, filled with DBBM-C soaked in blood or saline for 2-4-8-12 weeks before histomorphometry. DBBM-C blocks were fully hydrated after 30 s in saline when 120 s in blood could not hydrate blocks core. Stiffness gradually decreased 2.5-fold after blood soaking whereas a six-fold decrease was measured after 30 s in saline. In vivo, saline treatment allowed 50% more bone regeneration during the first month when compared to blood soaking. This difference was then no longer visible. New bone morphology and maturity were equivalent in both conditions. DBBM-C saline-soaking facilitated its handling and accelerated bone regeneration of highly qualitative tissues when compared to blood treatment. Saline pretreatment thus may increase the clinical predictability of bone augmentation procedures.

Activation of Human Osteoblasts via Different Bovine Bone Substitute Materials With and Without Injectable Platelet Rich Fibrin in vitro

INTRODUCTION

The aim of the in vitro study was to compare the effect of four bovine bone substitute materials (XBSM) with and without injectable platelet-reach fibrin for viability and metabolic activity of human osteoblasts (HOB) as well as expression of alkaline phosphatase (ALP), bone morphogenetic protein 2 (BMP-2), and osteonectin (OCN).

MATERIALS AND METHODS

Cerabone® (CB), Bio-Oss® (BO), Creos Xenogain® (CX) and MinerOss® X (MO) ± i-PRF were incubated with HOB. At day 3, 7, and 10, cell viability and metabolic activity as well as expression of ALP, OCN, and BMP-2, was examined.

RESULTS

For non-i-PRF groups, the highest values concerning viability were seen for CB at all time points. Pre-treatment with i-PRF increased viability in all groups with the highest values for CB-i-PRF after 3 and 7 and for CX-i-PRF after 10 days. For metabolic activity, the highest rate among non-i-PRF groups was seen for MO at day 3 and for CB at day 7 and 10. Here, i-PRF groups showed higher values than non-i-PRF groups (highest values: CB + i-PRF) at all time points. There was no difference in ALP-expression between groups. For OCN expression in non-i-PRF groups, CB showed the highest values after day 3, CX after day 7 and 10. Among i-PRF-groups, the highest values were seen for CX + i-PRF. At day 3, the highest BMP-2 expression was observed for CX. Here, for i-PRF groups, the highest increase was seen for CX + i-PRF at day 3. At day 7 and 10, there was no significant difference among groups.

CONCLUSION

XBSM sintered under high temperature showed increased HOB viability and metabolic activity through the whole period when compared to XBSM manufactured at lower temperatures. Overall, the combination of XBSM with i-PRF improved all cellular parameters, ALP and BMP-2 expression at earlier stages as well as OCN expression at later stages.

Comparison of Bone Formation After Sinus Membrane Lifting Without Graft or Using Bone Substitute "Histologic and Radiographic Evaluation"

PURPOSE

Sinus floor elevation without using autogenous bone graft or bone substitute will eliminate donor site morbidity and reduce the cost and the risk of infection. We evaluated the bone gain after sinus membrane elevation without graft or using bone substitute in the same maxilla. Dental implants were inserted simultaneously as a 1-stage procedure.

PATIENTS AND METHODS

In a split-mouth design, we conducted a randomized double-blinded clinical trial performing sinus lifts and simultaneous implant insertion in 10 healthy patients (n = 20). On the 1 site, we performed graft-less sinus lift (group 1) and on the other site Cerabone was used as bone substitute (group 2), respectively. The quantity and quality of bone gained in each sinus were evaluated and compared radiologically and histomorphometrically.

RESULTS

After 6 months, the average gain of bone height was 6.21 and 9.58 mm in group 1 and 2, respectively, as measured radiologically (P < .001, P < .001). Histomorphometric examination showed significantly higher thickness of trabeculae and bone formation in group 1 (P = .003 and P = .002). However, the neovascularization was higher, but not significantly (P = .288).

CONCLUSIONS

Radiological bone gain was similar in both groups. However, histomorphometric examination showed superior bone formation in graft-less group as compared to the Cerabone group. The blood clot seems to be an adequate filler and excellent medium for bone formation. More studies in split-mouth design are needed to compare different bone substitutes.

Histological and Radiological Features of a Four-Phase Injectable Synthetic Bone Graft in Guided Bone Regeneration: A Case Report

BACKGROUND AND OBJECTIVE

Injectable synthetic bone grafts (ISBG) are widely used biomaterials for regeneration purposes. The aim of this case report was to examine the efficacy of ISBG in the management of buccal fenestration in the case of a 25-year-old female.

CASE REPORT

After a traumatic tooth extraction, the defect was filled with ISBG and covered with a resorbable membrane. The ISBG showed easy handling and the patient had no complications during healing. Six months after augmentation, a bone biopsy was taken during implant bed preparation. The histological results showed good integration of ISBG into the newly formed bone and no signs of tissue inflammation. Additionally, a CBCT (cone beam computed tomography) analysis was performed to support the histological results.

CONCLUSION

The use of the examined ISBG led to successful treatment of the buccal fenestration defect.

Physicochemical Characterization of Five Different Bone Graft Substitutes Used in Periodontal Regeneration: An In Vitro Study

Background:

Periodontal regeneration involves using a variety of bone graft substitutes (BGS) of varying origin and manufacturing processes. These include a wide range of biomaterials that are mainly of two types: the xenografts and alloplasts. The efficacy of these BGS depends upon the physical characteristics such as particle size, porous nature, surface morphology, as well as the chemical characteristics like composition, crystallinity and resorption properties.

Aims:

The present study is a descriptive study that focuses on describing the physicochemical characteristics of five selected commercially available BGS that are frequently used in periodontal regeneration procedures. The BGS studied here included two xenografts (colocast and osseograft) and three alloplasts (B-OstIN, biograft HABG active and biograft HT).

Materials and Methods:

The physical properties of the BGS, including particle size, morphology, and surface topography, were analyzed using SEM. The mineral phases and crystallinity of the BGS were analyzed using XRD.

Results:

The results showed that the xenografts (colocast and osseograft) had minimal mineral composition and crystalline structure. The physical properties such as surface roughness and porosity were less compared to alloplastic materials. The alloplasts (B-OstIN, biograft HABG and biograft HT) that had different chemical compositions showed varying physical and crystalline properties. Biograft HT showed a superior porous scaffold architecture among all BGS studied.

Conclusion:

It is important for a clinician to have a thorough understanding about the physicochemical characteristics of BGS they use in periodontal regeneration. The xenografts evaluated here had minimal physical and crystalline properties. Among the alloplasts studied, biograft HT showed superior physicochemical properties, while the presence of bioactive glass in biograft HABG enhanced regeneration.

Influence of Different Rehydration Protocols on Biomechanical Properties of Allogeneic Cortical Bone Plates: A Combined in-vitro/in-vivo Study

Introduction: Allogeneic cortical bone plates (CP) are used for alveolar ridge augmentation. Since CP are freeze-dried and dehydrated during processing, the breaking strength (BS) and the flexibility (FX) are reduced, resulting in a relevant risk for plate fractures during insertion. The aim of this study was to evaluate the influence of rehydration time on the biomechanical properties (BS & FX) of CP in-vitro and in vivo.Material and Methods: 40 CP were randomly divided into four experimental groups. (A) untreated control (n = 10), rehydration for 10 (B), 30 (C) and 60 (D) minutes in 0.9% saline solution (n = 10 each). BS [Newton, N] and FX [mm] (force till fracture and distance of deflection to the breaking point) were analyzed. Besides, architectural features of all CP groups were visualized and examined by scanning electron microscopy (SEM). In addition, the frequency of CP fractures of rehydrated- vs. non-rehydrated CP was retrospectively analyzed in 6 patients.Results: Compared to the control group, significantly increased BS and FX were demonstrated after 10, 30 and 60 minutes of rehydration (p each ≤ 0.035). After a rehydration time of 10 minutes, no additional increase of BS and FX was seen when compared to30 and 60 minutes (p each = 1.0). SEM scans demonstrated that the CP fracture characteristics were influenced by the different rehydration protocols. The frequency of CP fractures was reduced in patients by CP rehydration.Conclusion: The biomechanical properties of CP can be significantly improved by 10 min of rehydration, resulting in an increased BS and FX, that might be clinically relevant.

Synthetic Bone Substitutes and Mechanical Devices for the Augmentation of Osteoporotic Proximal Humeral Fractures: A Systematic Review of Clinical Studies

BACKGROUND

Different augmentation techniques have been described in the literature in addition to the surgical treatment of proximal humeral fractures. The aim of this systematic review was to analyze the use of cements, bone substitutes, and other devices for the augmentation of proximal humeral fractures.

METHODS

A systematic review was conducted by using PubMed/MEDLINE, ISI Web of Knowledge, Cochrane Library, Scopus/EMBASE, and Google Scholar databases according the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines over the years 1966 to 2019. The search term "humeral fracture proximal" was combined with "augmentation"; "polymethylmethacrylate, PMMA"; "cement"; "bone substitutes"; "hydroxyapatite"; "calcium phosphates"; "calcium sulfate"; "cell therapies", and "tissue engineering" to find the literature relevant to the topic under review.

RESULTS

A total of 10 clinical studies considered eligible for the review, with a total of 308 patients, were included. Mean age at the time of injury was 68.8 years (range of 58-92). The most commonly described techniques were reinforcing the screw-bone interface with bone PMMA cement (three studies), filling the metaphyseal void with synthetic bone substitutes (five studies), and enhancing structural support with metallic devices (two studies).

CONCLUSION

PMMA cementation could improve screw-tip fixation. Calcium phosphate and calcium sulfate injectable composites provided good biocompatibility, osteoconductivity, and lower mechanical failure rate when compared to non-augmented fractures. Mechanical devices currently have a limited role. However, the available evidence is provided mainly by level III to IV studies, and none of the proposed techniques have been sufficiently studied.

In situ bone tissue engineering using gene delivery nanocomplexes

Gene delivery offers promising outcomes for functional recovery or regeneration of lost tissues at cellular and tissue levels. However, more efficient carriers are needed to safely and locally delivery of genetic materials. Herein, we demonstrate microfluidic-assisted synthesis of plasmid DNA (pDNA)-based nanocomplexe (NC) platforms for bone tissue regeneration. pDNA encoding human bone morphogenesis protein-2 (BMP-2) was used as a gene of interest. Formation and fine-tuning of nanocomplexes (NCs) between pDNA and chitosan (CS) as carriers were performed using a micromixer platform. Flow characteristics were adjusted to tune mixing time and consequently size, zeta potential, and compactness of assembled NCs. Subsequently, NCs were immobilized on a nanofibrous Poly(ε-caprolactone) (PCL) scaffold functionalized with metalloprotease-sensitive peptide (MMP-sensitive). This construct can provide an environmental-sensitive and localized gene delivery platform. Osteogenic differentiation of bone marrow-derived mesenchymal stem cells (MSCs) was studied using chemical and biological assays. The presented results converge to indicate a great potential of the developed methodology for in situ bone tissue engineering using immobilized microfluidic-synthesized gene delivery nanocomplexes, which is readily expandable in the field of regenerative nanomedicine. STATEMENT OF SIGNIFICANCE: In this study, we demonstrate microfluidic-assisted synthesis of plasmid DNA (pDNA)-based nanocomplexes (NCs) platforms for bone tissue regeneration. We used pDNA encoding human bone morphogenesis protein-2 (BMP-2) as the gene of interest. Using micromixer platform nanocomplexes (NCs) between pDNA and chitosan (CS) were fabricated and optimized. NCs were immobilized on a nanofibrous polycaprolactone scaffold functionalized with metalloprotease-sensitive peptide. In vitro and in vivo assays confirmed the osteogenic differentiation of mesenchymal stem cells (MSCs). The obtained data indicated great potential of the developed methodology for in situ bone tissue engineering using immobilized microfluidic-synthesized gene delivery nanocomplexes, which is readily expandable in the field of regenerative nanomedicine.

Effect of Sintering on In Vivo Biological Performance of Chemically Deproteinized Bovine Hydroxyapatite

The influence of the manufacturing process on physicochemical properties and biological performance of xenogenic biomaterials has been extensively studied, but its quantification on bone-to-material contact remains poorly investigated. The aim of this study was to investigate the effect of different heat treatments of an experimental chemically-deproteinized bovine hydroxyapatite in vivo in terms of new bone formation and osteoconductivity. Protein-free hydroxyapatite from bovine origin was produced under sub-critical conditions and then either sintered at 820 °C or 1200 °C. Structural and morphological properties were assessed by scanning electron microscopy (SEM), measurement of surface area and X-ray diffractometry (XRD). The materials were then implanted in standardized alveolar bone defects in minipigs and histomorphometric evaluations were performed using non-decalcified sections. Marked topographical differences were observed by SEM analysis. As the sintering temperature of the experimental material increased, the surface area significantly decreased while crystallite size increased. In vivo samples showed that the highly sintered BHA presented a significantly lower percentage of newly formed bone than the unheated one (p = 0.009). In addition, the percentage of bone-to-material contact (BMC) was significantly lowered in the highly sintered group when compared to the unsintered (p = 0.01) and 820 °C sintered (p = 0.02) groups. Non-sintered or sintered at 820 °C BHA seems to maintain a certain surface roughness allowing better bone regeneration and BMC. On the contrary, sintering of BHA at 1200 °C has an effect on its morphological and structural characteristics and significantly modify its biological performance (osteoconductivity) and crystallinity.

Histological and immunohistochemical comparison of two different allogeneic bone grafting materials for alveolar ridge reconstruction: A prospective randomized trial in humans

Background

Preclinical studies have hypothesized a possible immunological reponse to allogeneic materials due to detection of remnants of potential immunogenic molecules. However, their impact on integration, bone remodeling and immunological reaction after the augmentation procedure is largely unknown and a direct correlation of analytical data and evaluation of human biopsies is missing.

Purpose

The present study aimed to compare two commercially available allogeneic materials regarding their content of cellular remnants as well as the bone remodeling, and integration and potential immunologic reactions on a histological and immunohistochemical level, integrating also in vitro analytical evaluation of the specific batches that were used clinically.

Materials and Methods

Twenty patients were randomly assigned to treatment with Maxgraft or Puros for lateral ridge augmentation in a two‐stage surgery. After a mean healing period of 5 months, implants were placed and biopsies were taken for histological, immunhistochemical, and histomorphometrical evaluation regarding bone remodeling and inflammation, protein concentrations in vitro and the presence of MHC molecules of the same batches used clinically.

Results

No differences in clinical outcome, histological, immunohistochemical, and in vitro protein analysis between the two bone grafting materials were observed. Active bone remodeling, amount of newly formed bone, and residual grafting material was independent of the materials used, but varied between subjects. MHC1 residues were not detected in any sample.

Conclusions

Within the limitations of this study, both tested materials yielded equivalent results in terms of clinical outcome, new bone formation, and lack of immunological potential on a histological and immunohistochemical level.

Enamel matrix derivative in liquid form as adjunct to natural bovine bone grafting at buccal bone dehiscence defects at implant sites: An experimental study in beagle dogs

OBJECTIVES

To evaluate the effect of enamel matrix derivative in liquid form (EMD-liquid) as adjunct to grafting with natural bovine bone (NBB), on new bone formation and osseointegration in buccal dehiscence defects at dental implants.

MATERIAL AND METHODS

In six beagles, 3 months after extraction of the mandibular premolars and first molars. Three titanium implants (3.3 Ø × 8.0 mm) were inserted, and dehiscence-type defects (mesiodistal width 3 mm × 5 mm depth) were created on their buccal aspect. The defects were randomly assigned to one of the following three treatment groups: Group 1: NBB, Group 2: NBB/EMD-L, Group 3: Control. All sites were covered with a collagen membrane. Histomorphometric measurements were performed after 3 months of healing.

RESULTS

New bone area, bone-to-implant contact (BIC), and first BIC (fBIC) in the NBB and NBB/EMD-L groups were significantly greater than in the control group (p < .05). Further, f-BIC was at a significantly more coronal position in the NBB + EMD-liquid group (0.4 ± 0.1 mm) compared with the NBB group (1.2 ± 0.2 mm).

CONCLUSIONS

Natural bovine bone grafting enhances bone regeneration and osseointegration at implants with buccal bone dehiscences compared with no grafting, and adjunct use of EMD-liquid appears to further enhance bone formation and osseointegration.

Histological and Histomorphometric Analyses of Two Bovine Bone Blocks Implanted in Rabbit Calvaria

This study compared the osteogenic potential of two types of bovine bone blocks. Blocks were obtained by either sintered or a nonsintered process. Calvaria were surgically exposed in 20 rabbits. In each animal, six 0.5-mm-diameter cortical microperforations were drilled with a carbide bur before grafting to promote graft irrigation. The sintered (group 1) and nonsintered (group 2) bovine bone blocks (6 mm diameter, 5 mm high) were bilaterally screwed onto calvarial bone. Blocks were previously prepared from a larger block using a trephine bur. Rabbits were sacrificed after 6 and 8 weeks for the histological and histomorphometric analyses. Samples were processed using the historesin technique. The quantitative and qualitative analyses of the newly formed bone were undertaken using light microscopy. Both groups showed modest new bone formation and remodeling. At the 8-week follow-up, the sintered group displayed significantly lower bone resorption (average of 10% in group 1 and 25% in group 2) and neo-formation (12.86 ± 1.52%) compared to the nonsintered group (16.10 ± 1.29%) at both follow-ups (p < 0.05). One limitation of the present animal model is that the study demonstrates that variations in the physico-chemical properties of the bone substitute material clearly influence the in vivo behavior.

Histologic and Histomorphometric Analysis of Bone Regeneration with Bovine Grafting Material after 24 Months of Healing. A Case Report

Anorganic bovine bone mineral matrix (ABBMM) has been reported to have osteoconductive properties and no inflammatory or adverse responses when used as grafting material in sinus augmentation procedures. However, controversy remains in regard to degradation rate of ABBMM. The aim of this study was to histologically and histomorphometrically evaluate the degradation of ABBMM in human bone samples obtained in one patient 24 months after sinus augmentation. Materials and Methods: The histologic and histomorphometric analysis was performed by means of light microscopy in three specimens harvested from the same patient, Results: After 24 months the tissue pattern appeared to be composed of residual particles, some in close contact with the newly formed bone, others separated by translucent areas and osteoid tissues. Newly-formed bone presented different levels of maturation and numerous osteocytes, with greater numbers in bone closer to the grafted particles (27.3% vs. 11.2%, p < 0.05). The histomorphometric analysis showed mean values of 40.84% newly-formed bone, 33.58% residual graft material, 23.84% marrow spaces, and 1.69% osteoid tissue, Conclusions: Even though ABBMM underwent considerable resorption, a great amount of residual grafting material was still present after two years of healing following sinus augmentation. This study confirms that the bovine grafts can be classified as long-term degradation materials.