Nepafenac-Loaded Cyclodextrin/Polymer Nanoaggregates: A New Approach to Eye Drop Formulation

Development of ion-triggered in situ gel containing ketoconazole/hydroxypropyl-β-cyclodextrin for ocular delivery: in vitro and in vivo evaluation

The application of ketoconazole (KET) in ocular drug delivery is restricted by its poor aqueous solubility though its broad-spectrum antifungal activity. The aim of this study is to develop an ion-sensitive in situ gel (ISG) of KET to promote its ocular bioavailability in topical application. The solubility of KET in water was increased by complexation with hydroxypropyl-β-cyclodextrin (HPβCD), then KET-HPβCD inclusion complex (KET-IC) was fabricated into an ion-sensitive ISG triggered by sodium alginate (SA). The in vitro drug release and antifungal activities investigations demonstrated that the KET-IC-ISG formulation increased drug release and anti-fungal activities compared to pure KET. The ex vivo rabbit corneal permeation studied demonstrated higher permeability of KET-IC-ISG formulation (Papp of (6.34 ± 0.21) × 10-4 cm/h) than pure KET (Papp of (3.09 ± 0.09) × 10-4 cm/h). The cytotoxicity assay and the ocular irritation study in rabbits confirmed the KET-IC-ISG safety and well tolerance. The ocular pharmacokinetics of KET in rabbits was investigated and the results showed that the KET-IC-ISG increased its bioavailability in cornea by 47-fold. In conclusion, the KET-IC-ISG system promoted the precorneal retention, the ocular drug bioavailability and the developed formulation is a potential strategy to treat mycotic keratitis.

Improved triamcinolone acetonide-eluting contact lenses based on cyclodextrins and high hydrostatic pressure assisted complexation

Contact lenses (CLs) constitute an advantageous platform for the topical release of corticosteroids due to their prolonged contact with the eye. However, the lipophilic nature of corticosteroids hampers CLs' ability to release therapeutic amounts. Two approaches to improve loading and release of triamcinolone acetonide (TA) from poly(2-hydroxyethyl methacrylate)-based hydrogels were investigated: adding 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) to the monomers solution before polymerization (HEMA/i-CD) and an hydrogels' post-treatment with HP-β-CD (HEMA/p-CD). The effect of HP-β-CD and sterilization by high hydrostatic pressure (HHP) on the hydrogel properties (water content, oxygen and ion permeability, roughness, transmittance, and stiffness) was evaluated. The HEMA/i-CD hydrogels had stronger affinity for TA, sustaining its release for one day. HHP sterilization promoted the formation of cyclodextrin-TA complexes within the hydrogels, improving their drug-loading capacity »60 %. Cytotoxicity and irritability tests confirmed the safety of the therapeutic CLs. TA released from the hydrogels permeated through ocular tissues ex vivo and showed anti-inflammatory activity. Finally, a previously validated mathematical model was used to estimate the ability of the TA-loaded CLs to deliver therapeutic drug concentrations to the posterior part of the eye. Overall, HP-β-CD-containing CLs are promising candidates for the topical ocular application of TA as an alternative delivery system to intraocular injections.

Development of Innovative Electrospun Nepafenac-Loaded Nanofibers-based Ophthalmic Inserts

Electrospun nanofibers can be utilized to develop patient-centric ophthalmic formulations with reasonable bioavailability at the targeted site. The current study aimed to develop 0.1% w/w of nepafenac-loaded electrospun nanofibrous webs as potential candidates for ocular delivery of nepafenac with improved solubility and stability. Nine different formulations were prepared by electrospinning and investigated for morphology, physicochemical properties, drug release, cytocompatibility, and in vitro and ex vivo permeability. The scanning electron microscopy images showed fibrous samples. Fourier transform infrared spectroscopy and X-ray diffraction confirmed the polymer cross-linking and the formation of amorphous solid dispersion. All formulations showed complete and fast release of nepafenac (≤ 60 minutes), and the release followed first-order kinetics (β values for all formulations were <1). The formulations (F3, F6, and F9) showed considerable in vitro and ex vivo permeability. The Raman studies revealed comparable corneal distributions of F3 and the commercial Nevanac® suspension at 60 min (p value = 0.6433). The fibrous composition remains stable under stress conditions (40 ± 2 °C, 75 ± 5% relative humidity). The formulation composition showed good cytocompatibility with hen eggs tested on the chorioallantoic membrane of chick embryos. The developed nanofiber webs could be a promising candidate for nepafenac-loaded ophthalmic inserts. Chemical compounds studied in this article Nepafenac (PubChem CID151075); Polyvinyl alcohol (PubChem CID 11199); Poloxamer 407 (PubChem CID 24751); Chloroform (PubChem CID 6212); Methanol (PubChem CID 887); L-α-phosphatidylcholine (PubChem CID 10425706); Ethylenediaminetetraacetic acid (PubChem CID 6049).

Cyclodextrin-enabled nepafenac eye drops with improved absorption open a new therapeutic window

Nepafenac is a highly effective NSAID used for treating postoperative ocular inflammation and pain after cataract surgery and its advantage over conventional topical NSAIDs has been proved many times. However, Nevanac® is a suspension eye drop, which clearly lacks patient compliance causing irritation, blurred vision, foreign body sensation along with problematic dosage due to its sticky, inhomogeneous consistence. In this study, nepafenac containing eye drops were prepared using hydroxypropyl-β-cyclodextrin to ensure complete dissolution of nepafenac, sodium hyaluronate to provide mucoadhesion and adequate viscosity and a preservative-free officinal formula, Oculogutta Carbomerae containing carbomer (just like Nevanac®), therefore providing a similar base for the new formulations. According to an experimental design, 11 formulations were tested in vitro including two reference formulations by measuring their viscosity, mucoadhesion, drug release and corneal permeability. Finally, two formulations were found promising and investigated further on porcine eyes ex vivo and corneal distribution of nepafenac was determined by RAMAN mapping. The results showed that one formulation possessed better bioavailability ex vivo than Nevanac® 0.1 % suspension, while the other formulation containing only 60 % of the original dose were ex vivo equivalent with Nevanac® opening the way to nepafenac-containing eye drops with better patient compliance in the future.

A topical fluorometholone nanoformulation fabricated under aqueous condition for the treatment of dry eye

Fluorometholone (FMT) is a frequently prescribed drug for the alleviation of dry eye. However, due to low aqueous solubility, it has been routinely used as an ophthalmic suspension, which is characterized by low bioavailability, inconvenience of administration, and difficulty in delivering accurate dose. Furthermore, the opaque appearance of the ophthalmic suspension is not desirable for optical purpose. In the present study, a transparent FMT nanoformulation (FMT-CD NPs) was fabricated by the cyclodextrin (CD) nanoparticle technology without organic solvents. It was demonstrated that FMT was encapsulated in an amorphous form, which was associated with increased release rate and enhanced corneal penetration efficiency. The biocompatibility of FMT-CD NPs was confirmed by the Live/Dead assay, CCK-8 assay and the wound healing assay. Most importantly, FMT-CD NPs alleviated dry eye signs more efficiently than the commercial eye drop, with one-fifth the dosage of FMT in the latter. Collectively, our study provides a promising FMT formulation for improved management of dry eye while reducing drug related side effects.

Effect of Soluplus® on γ-cyclodextrin solubilization of irbesartan and candesartan and their nanoaggregates formation

The poor aqueous solubility of irbesartan (IRB) and candesartan cilexetil (CAC) may hamper their bioavailability when orally or topically administered. Among several attempts, the promising nanoaggregate formation by γ-cyclodextrin (γCD) complexation of drugs in aqueous solution with or without water-soluble polymers was investigated. According to phase solubility studies, Soluplus® showed the highest complexation efficiency (CE) of drug/γCD complexes among the polymers tested. The aqueous solubility of IRB and CAC was markedly increased as a function of Soluplus^® concentrations. The binary drug/γCD and ternary drug/γCD/Soluplus^® complex formations were supported and confirmed by solid-state characterizations, including differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and Fourier transform infrared (FT-IR) spectroscopy. The true inclusion mode was also proved by proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The nanoaggregate size and morphology of binary and ternary systems were observed using dynamic light scattering (DLS), and transmission electron microscopy (TEM) techniques. The size of these nanocarriers depends on the concentration of Soluplus^®. The use of Soluplus^® could significantly enhance drug solubility and stabilize complex nanoaggregates, which could be a prospective platform for drug delivery systems.

Cyclodextrins Allow the Combination of Incompatible Vancomycin and Ceftazidime into an Ophthalmic Formulation for the Treatment of Bacterial Keratitis

Ceftazidime (CZ) and vancomycin (VA) are two antibiotics used to treat bacterial keratitis. Due to their physical incompatibility (formation of a precipitate), it is not currently possible to associate both molecules in a single container for ophthalmic administration. We firstly characterized the incompatibility then investigated if 2-hydroxypropyl-beta (HPβCD) and 2-hydroxypropyl-gamma cyclodextrins (HPγCD) could prevent this incompatibility. The impact of pH on the precipitation phenomena was investigated by analysing the supernatant solution of the mixture using high performance liquid chromatography. A characterization of the inclusion of CZ with HPγCD using ¹H nuclear magnetic resonance (NMR), and VA with HPβCD using ¹H-NMR and a solubility diagram was performed. A design of experiment was built to determine the optimal conditions to obtain a formulation that had the lowest turbidity and particle count. Our results showed that VA and CZ form an equimolar precipitate below pH 7.3. The best formulation obtained underwent an in-vitro evaluation of its antibacterial activity. The impact of HPCDs on incompatibility has been demonstrated through the inclusion of antibiotics and especially VA. The formulation has been shown to be able to inhibit the incompatibility for pH higher than 7.3 and to possess unaltered antibacterial activity.

HP-β-CD for the formulation of IgG and Ig-based biotherapeutics

The main challenge to develop HCF for IgG and Ig-based therapeutics is to achieve essential solubility, viscosity and stability of these molecules in order to maintain product quality and meet regulatory requirement during manufacturing, production, storage, shipment and administration processes. The commonly used and FDA approved excipients for IgG and Ig -based therapeutics may no longer fulfil the challenge of HCF development for these molecules to certain extent, especially for some complex Ig-based platforms. 2-Hydroxypropyl beta-cyclodextrin (HP-β-CD) is one of the promising excipients applied recently for HCF development of IgG and Ig-based therapeutics although it has been used for formulation of small synthesized chemical drugs for more than thirty years. This review describes essential aspects about application of HP-β-CD as excipient in pharmaceutical formulation, including physico-chemical properties of HP-β-CD, supply chain, regulatory, patent landscape, marketed drugs with HP-β-CD, analytics and analytical challenges, stability and control strategies, and safety concerns. It also provides an overview of different studies, and outcomes thereof, regarding formulation development for IgGs and Ig-based molecules in liquid and solid (lyophilized) dosage forms with HP-β-CD. The review specifically highlights the challenges for formulation manufacturing of IgG and Ig-based therapeutics with HP-β-CD and identifies areas for future work in pharmaceutical and formulation development.

Latanoprost-loaded cyclodextrin microaggregate suspension eye drops for enhanced bioavailability and stability

OBJECTIVE

The bioavailability of conventional eye drops is very low due to different physiological barriers. Commercial latanoprost (LAT) eye drops (Xalatan®) need to be refrigerated and protected from light. The purpose of this study was to develop novel LAT eye drops to improve ocular bioavailability and stability.

METHODS

Ophthalmic suspension containing LAT/γ-cyclodextrin (γCD) aggregates was designed and the preparation process was sufficiently studied. The prepared formulations were evaluated for pH, viscosity, osmolality, particle size, entrapment efficiency and in vitro release study. In vitro permeability study using Human Corneal Epithelial Cells and in vivo studies on rabbits were also performed.

RESULTS

LAT/γCD aggregates were formed and confirmed by scanning electron microscopy. LAT/γCD eye drops showed obvious sustained release profiles and were more stable than Xalatan®. In vitro corneal permeation study indicated LAT/γCD eye drops had no significant cytotoxicity and had higher cell permeability. In vivo precorneal retention study showed AUC_0-6 h, C_max, and mean residence time (MRT) of LAT/γCD eye drops were 3.98, 2.12, and 2.07 times higher than those of Xalatan®, respectively. In vivo ocular distribution study revealed that AUC_0-24 h, C_max, and MRT for latanoprost acid in aqueous humor exhibited 2.60-fold, 1.36-fold, and 1.99-fold increase in LAT/γCD eye drops group than those of Xalatan® group, respectively.

CONCLUSION

Cyclodextrin microaggregate suspension eye drops represent a potential strategy for enhanced bioavailability and stability of LAT.

Degradation profile of nepafenac in aqueous solution and structural characterization of a novel degradation product

The stability of the anti-inflammatory drug nepafenac was investigated in aqueous solutions containing hydroxypropyl-β-cyclodextrin at three different values of pH and degradation products were identified. (2-Amino-3-benzoyl)-oxoacetic acid, previously not reported as nepafenac-related impurity, was isolated and structurally characterized by NMR and ESI-MS analyses. It was also shown that the formation of this α-ketoacid from nepafenac in alkaline water/organic cosolvent solution occurs through an aerobic oxidation of the key intermediate 7-benzoyl-1,3-dihydro-indol-2-one, which in some extent is protected from oxidation in the presence of the cyclodextrin additive.

Therapies Based on Nanoparticles for Eye Drug Delivery

Eye drug delivery, particularly to the retina, is a technical hurdle that needs to be solved and represents an ongoing current important medical field. Posterior segment eye diseases are a major cause of visual impairment worldwide. Age-related macular degeneration, glaucoma, and diabetic retinopathy are the major causes of blindness. To achieve efficient drug delivery and drug retention time in the posterior segment of the eye, novel delivery systems based on nanoparticles have been developed in the last few years. Nowadays, liposomes represent the most utilized nanoparticles for eye drug delivery and, recently, a broad spectrum of diverse nanoparticles continue to emerge with special characteristics representing ideal candidates for eye drug delivery.

Recent Advances in the Design of Topical Ophthalmic Delivery Systems in the Treatment of Ocular Surface Inflammation and Their Biopharmaceutical Evaluation

Ocular inflammation is one of the most common symptom of eye disorders and diseases. The therapeutic management of this inflammation must be rapid and effective in order to avoid deleterious effects for the eye and the vision. Steroidal (SAID) and non-steroidal (NSAID) anti-inflammatory drugs and immunosuppressive agents have been shown to be effective in treating inflammation of the ocular surface of the eye by topical administration. However, it is well established that the anatomical and physiological ocular barriers are limiting factors for drug penetration. In addition, such drugs are generally characterized by a very low aqueous solubility, resulting in low bioavailability as only 1% to 5% of the applied drug permeates the cornea. The present review gives an updated insight on the conventional formulations used in the treatment of ocular inflammation, i.e., ointments, eye drops, solutions, suspensions, gels, and emulsions, based on the commercial products available on the US, European, and French markets. Additionally, sophisticated formulations and innovative ocular drug delivery systems will be discussed. Promising results are presented with micro- and nanoparticulated systems, or combined strategies with polymers and colloidal systems, which offer a synergy in bioavailability and sustained release. Finally, different tools allowing the physical characterization of all these delivery systems, as well as in vitro, ex vivo, and in vivo evaluations, will be considered with regards to the safety, the tolerance, and the efficiency of the drug products.

Therapies Based on Nanoparticles for Eye Drug Delivery

Eye drug delivery, particularly to the retina, is a technical hurdle that needs to be solved and represents an ongoing current important medical field. Posterior segment eye diseases are a major cause of visual impairment worldwide. Age-related macular degeneration, glaucoma, and diabetic retinopathy are the major causes of blindness. To achieve efficient drug delivery and drug retention time in the posterior segment of the eye, novel delivery systems based on nanoparticles have been developed in the last few years. Nowadays, liposomes represent the most utilized nanoparticles for eye drug delivery and, recently, a broad spectrum of diverse nanoparticles continue to emerge with special characteristics representing ideal candidates for eye drug delivery.

In Vitro and Ex Vivo Evaluation of Nepafenac-Based Cyclodextrin Microparticles for Treatment of Eye Inflammation

The aim of this study was to design and evaluate novel cyclodextrin (CD)-based aggregate formulations to efficiently deliver nepafenac topically to the eye structure, to treat inflammation and increase nepafenac levels in the posterior segment, thus attenuating the response of inflammatory mediators. The physicochemical properties of nine aggregate formulations containing nepafenac/γ-CD/hydroxypropyl-β (HPβ)-CD complexes as well as their rheological properties, mucoadhesion, ocular irritancy, corneal and scleral permeability, and anti-inflammatory activity were investigated in detail. The results were compared with a commercially available nepafenac suspension, Nevanac^® 3 mg/mL. All formulations showed microparticles, neutral pH, and negative zeta potential (–6 to –27 mV). They were non-irritating and nontoxic and showed high permeation through bovine sclera. Formulations containing carboxymethyl cellulose (CMC) showed greater anti-inflammatory activity, even higher than the commercial formulation, Nevanac^® 0.3%. The optimized formulations represent an opportunity for topical instillation of drugs to the posterior segment of the eye.

Current Approaches to Use Cyclodextrins and Mucoadhesive Polymers in Ocular Drug Delivery—A Mini-Review

Ocular drug delivery provides a challenging opportunity to develop optimal formulations with proper therapeutic effects and acceptable patient compliance because there are many restricting factors involved, such as complex anatomical structures, defensive mechanisms, rapid drainage, and applicability issues. Fortunately, recent advances in the field mean that these problems can be overcome through the formulation of innovative ophthalmic products. Through the addition of solubility enhancer cyclodextrin derivatives and mucoadhesive polymers, the permeability of active ingredients is improved, and retention time is increased in the ocular surface. Therefore, preferable efficacy and bioavailability can be achieved. In this short review, the authors describe the theoretical background, technological possibilities, and the current approaches in the field of ophthalmology.