Advanced Photocatalytic Treatment of Wastewater Using Immobilized Titanium Dioxide as a Photocatalyst in a Pilot-Scale Reactor: Process Intensification

Sodium alginate microspheres loaded with purple phosphorus-based immobilized microorganisms for oilfield wastewater purification and heavy oil viscosity reduction

Immobilized microbial technology is a simple, cost-effective, and efficient technique to minimize the difficulty and energy consumption of heavy oil extraction, and the Chemical Oxygen Demand (COD) of oilfield wastewater. In this study, SA@VP-g-L was developed and utilized as a microbial immobilization carrier obtained by grafting lecithin onto purple phosphorus. The unique physicochemical properties of this carrier provide a stable and efficient attachment environment and survival site for microorganisms. Orthogonal tests showed that the optimum temperature for SA@VP-g-L immobilized microorganisms was 38 °C, the optimum pH was 7, the optimum inoculum was 7 % and the desired mineralization level was not higher than 15,000 ppm. Under suitable conditions, the immobilized microorganisms of SA@VP-g-L-immobilized microorganisms showed a COD removal of more than 80 %, the viscosity of heavy oil was reduced by 88.5 %. Displacement experiments indicated that the use of the carrier (SA@VP-g-L) led to an increase of 28.95 % in the heavy oil recovery. This phenomenon was ascribed to the reduction in the COD and the viscosity of the heavy oil within the re-injected water. Therefore, the application of SA@VP-g-L as a carrier to immobilize microorganisms in oilfields can improve the metabolic activity of microbial communities.

Sustainable treatment of surgical cotton processing effluent through coupled biological and photocatalytic reactors

The growing demand for surgical cotton in the healthcare sector has led to increased production in southern Tamil Nadu, generating effluents that pose environmental risks due to their chemical composition. Unlike conventional textile effluents, surgical cotton processing wastewater is distinct for its lack of colour additive, but it exhibits high chemical oxygen demand (COD) and contains significant inorganic pollutants, necessitating tailored treatment strategies. Despite extensive research on textile wastewater, effective solutions for surgical cotton effluents remain underexplored. This research bridges this gap by exploring a novel synergic method, algae-bacterial symbiosis combined with photocatalytic degradation for real surgical cotton effluent, in order to ultimately improve the removal ability of the contaminants. The general aim was to study the performance of three continuous reactor, a photocatalytic reactor, a biological rector and coupled biological-photocatalytic (CBPCR) reactor in the degradation of surgical cotton processing effluent during 30 days. The treatment efficacy was measured by observing the removal rates of inorganic nutrient, COD, and microbial growth. It was concluded that the CBPCR system successfully removed nitrate, phosphate, ammonia, and COD by 90%, 87%, 75%, and 93% respectively. In particular, the system fostered vigorous growth of both microalgae and bacteria, as indicated by a total chlorophyll concentration of 20.1 ± 0.91 mg/L and a dry cell weight of 1.81 ± 0.09 g/L. This paper shows the feasibility of the CBPCR system as a green, sustainable strategy for the treatment of surgical cotton effluent and as such fills a gap in current practice of industrial wastewater treatment.

Recent advances in designing and developing efficient sillenite-based materials for photocatalytic applications

Sillenite materials have been the subject of intense investigation for recent years due to their unique characteristics. They possess a distinct structure with space group I23, allowing them to exhibit distinctive features, such as an electronic structure ideal for certain applications such as photocatalysis. The present research delves into the structure, synthesis, and properties of sillenites, highlighting their suitability for photocatalysis. It explores also advanced engineering strategies for designing sillenite-based photocatalysts, including heterojunction formation, morphology modification, doping, and hybrid processes. Each strategy offers advantages and limitations that are critically discussed. The review then lists and discusses the photocatalytic performance of various sillenite-based systems recently developed for common applications, such as removing hazardous organic and inorganic contaminants, and even infrequent applications, such as microbial inactivation, H2 generation, CO2 reduction and N2 fixation. Finally, valuable insights and suggestions are put forward for future research directions in the field of sillenite-based photocatalysis. This comprehensive overview would provide a valuable resource for the development of efficient photocatalytic systems to address environmental and energy challenges.

Preliminary insights on the development of a continuous-flow solar system for the photocatalytic degradation of contaminants of emerging concern in water

The ubiquity and impact of pharmaceuticals and pesticides, as well as their residues in environmental compartments, particularly in water, have raised human and environmental health concerns. This emphasizes the need of developing sustainable methods for their removal. Solar-driven photocatalytic degradation has emerged as a promising approach for the chemical decontamination of water, sparking intensive scientific research in this field. Advancements in photocatalytic materials have driven the need for solar reactors that efficiently integrate photocatalysts for real-world water treatment. This study reports preliminary results from the development and evaluation of a solar system for TiO2-based photocatalytic degradation of intermittently flowing water contaminated with doxycycline (DXC), sulfamethoxazole (SMX), dexamethasone (DXM), and carbendazim (CBZ). The system consisted of a Fresnel-type UV solar concentrator that focused on the opening and focal point of a parabolic trough concentrator, within which tubular quartz glass reactors were fixed. Concentric springs coated with TiO2, arranged one inside the other, were fixed inside the quartz reactors. The reactors are connected to a raw water tank at the inlet and a check valve at the outlet. Rotating wheels at the collector base enable solar tracking in two axes. The substances (SMX, DXC, and CBZ) were dissolved in dechlorinated tap water at a concentration of 1.0 mg/L, except DXM (0.8 mg/L). The water underwent sequential batch (~ 3 L each, without recirculation) processing with retention times of 15, 30, 60, 90, and 120 min. After 15 min, the degradation rates were as follows: DXC 87%, SMX 35.5%, DXM 32%, and CBZ 31.8%. The system processed 101 L of water daily, simultaneously removing 870, 355, 256, and 318 µg/L of DXC, SMX, DXM, and CBZ, respectively, showcasing its potential for real-world chemical water decontamination application. Further enhancements that enable continuous-flow operation and integrate highly effective adsorbents and photocatalytic materials can significantly enhance system performance.

Advancement in nanomaterials for environmental pollutants remediation: a systematic review on bibliometrics analysis, material types, synthesis pathways, and related mechanisms

Environmental pollution is a major issue that requires effective solutions. Nanomaterials (NMs) have emerged as promising candidates for pollution remediation due to their unique properties. This review paper provides a systematic analysis of the potential of NMs for environmental pollution remediation compared to conventional techniques. It elaborates on several aspects, including conventional and advanced techniques for removing pollutants, classification of NMs (organic, inorganic, and composite base). The efficiency of NMs in remediation of pollutants depends on their dispersion and retention, with each type of NM having different advantages and disadvantages. Various synthesis pathways for NMs, including traditional synthesis (chemical and physical) and biological synthesis pathways, mechanisms of reaction for pollutants removal using NMs, such as adsorption, filtration, disinfection, photocatalysis, and oxidation, also are evaluated. Additionally, this review presents suggestions for future investigation strategies to improve the efficacy of NMs in environmental remediation. The research so far provides strong evidence that NMs could effectively remove contaminants and may be valuable assets for various industrial purposes. However, further research and development are necessary to fully realize this potential, such as exploring new synthesis pathways and improving the dispersion and retention of NMs in the environment. Furthermore, there is a need to compare the efficacy of different types of NMs for remediating specific pollutants. Overall, this review highlights the immense potential of NMs for mitigating environmental pollutants and calls for more research in this direction.

ASPAD dynamic simulation and artificial neural network for atenolol adsorption in GGSWAC packed bed column

This study aimed to assess the dynamic simulation models provided by Aspen adsorption (ASPAD) and artificial neural network (ANN) in understanding the adsorption behavior of atenolol (ATN) on gasified Glyricidia sepium woodchips activated carbon (GGSWAC) within fixed bed columns for wastewater treatment. The findings demonstrated that increasing the bed height from 1 to 3 cm extended breakthrough and exhaustion times while enhancing adsorption capacity. Conversely, higher initial ATN concentrations resulted in shorter breakthrough and exhaustion times but increased adsorption capacity. Elevated influent flow rates reduced breakthrough and exhaustion times while maintaining constant adsorption capacity. The ASPAD software demonstrated competence in accurately modeling the crucial exhaustion points. However, there is room for enhancement in forecasting breakthrough times, as it exhibited deviations ranging from 6.52 to 239.53% when compared to the actual experimental data. ANN models in both MATLAB and Python demonstrated precise predictive abilities, with the Python model (R2 = 0.985) outperforming the MATLAB model (R2 = 0.9691). The Python ANN also exhibited superior fitting performance with lower MSE and MAE. The most influential factor was the initial ATN concentration (28.96%), followed by bed height (26.39%), influent flow rate (22.43%), and total effluent time (22.22%). The findings of this study offer an extensive comprehension of breakthrough patterns and enable accurate forecasts of column performance.

Process analysis of microplastic aging during the photochemical oxidation process and its effect on the adsorption behavior of dissolved organic matter

Information on microplastics (MPs) interactions with dissolved organic matter (DOM) is essential for understanding their environmental impacts. However, research is scarce regarding the adsorption behavior of DOM with different characteristics onto pristine and aged MPs. This research thus investigates MPs aging behavior accelerated by UV/Persulfate and UV/chlorine oxidation processes and the adsorption behavior of organic matter with low-specific ultraviolet absorbance (L-SUVA) and high-SUVA (H-SUVA) characteristics. MPs were degraded by UV/Cl and UV/Persulfate for 30 days. Changes in thermal properties, surface morphology, and chemistry were studied using different analytical techniques. The adsorption behavior was assessed by adsorption kinetic and isotherm study. After oxidation, the surface of the MPs showed a significant increase in the oxygen-containing functional groups, contact angle, surface roughness, and surface energy, and a decrease in crystallinity. The oxidation effect follows the order of UV/Cl > UV/Persulfate. The kinetic and equilibrium data of H-SUVA adsorption on pristine and aged MPs well-fitted the pseudo-second-order and Langmuir model. In contrast, L-SUVA well-fitted the pseudo-first-order and Freundlich model. The adsorption capacity (qm) increased in the following orders: 8.11 > 5.87>4.29 mg g-1 for H-SUVA and 19.81 > 6.662>5.315 mg g-1 for L-SUVA by MPs aged with UV/Cl, UV/Persulfate and pristine MPs, respectively. The larger the surface damage of MPs, the greater the adsorption affinity of DOM. The result was attributed to the physical adsorption process, hydrophobic interactions, electrostatic, hydrogen, and halogen bonding. These findings are beneficial to provide new insights involving the adsorption behavior and interaction mechanisms of DOM onto MPs for the environmental risk assessment.

Plants, animals, and fisheries waste-mediated bioremediation of contaminants of environmental and emerging concern (CEECs)-a circular bioresource utilization approach

The release of contaminants of environmental concern including heavy metals and metalloids, and contaminants of emerging concern including organic micropollutants from processing industries, pharmaceuticals, personal care, and anthropogenic sources, is a growing threat worldwide. Mitigating inorganic and organic contaminants, which can be coined as contaminants of environmental and emerging concern (CEECs), is a big challenge as traditional physicochemical processes are not economically viable for managing mixed contaminants of low concentrations. As a result, low-cost materials must be designed to provide high CEEC removal efficiency. One of the environmentally viable and energy-efficient approaches is biosorption, which involves using biomass or biopolymers isolated from plants or animals to decontaminate heavy metals in contaminated environments using inherent biological mechanisms. Among chemical constituents in plant biomass, cellulose, lignin, hemicellulose, proteins, polysaccharides, phenolic compounds, and animal biomass include polysaccharides and other compounds to bind heavy metals covalently and non-covalently. These functional groups include carboxyl, hydroxyl, carbonyl, amide, amine, and sulfhydryl. Cation-exchange capacities of these bioadsorbents can be improved by applying chemical modifications. The relevance of chemical constituents and bioactives in biosorbents derived from agricultural production such as food and fodder crops, bioenergy and cash crops, fruit and vegetable crops, medicinal and aromatic plants, plantation trees, aquatic and terrestrial weeds, and animal production such as dairy, goatery, poultry, duckery, and fisheries is highlighted in this comprehensive review for sequestering and bioremediation of CEECs, including as many as ten different heavy metals and metalloids co-contaminated with other organic micropollutants in circular bioresource utilization and one-health concepts.

β-Cyclodextrin functionalized magnetic polyamine-amine dendrimers for high enrichment and effective analysis of trace bisphenolic pollutants in beverages

Bisphenols (BPs) are typical endocrine disruptors, which can cause great effects on environmental, organisms and human health. In this study, β-Cyclodextrin (β-CD) functionalized polyamidoamine dendrimers-modified Fe₃O₄ nanomaterials (MNPs@PAMAM (G3.0)@β-CD) were facilely synthesized. It exhibited good adsorption capacities for BPs, which was utilized to construct a sensitive tool in combination with high performance liquid chromatography for monitoring BPs such as bisphenol A (BPA), tetrabromobisphenol A (TBBPA), bisphenol S (BPS), bisphenol AF (BPAF) and bisphenol AP (BPAP) in beverage samples. The factors affecting the enrichment were examined such as generation of adsorbent, dosage of adsorbent, type and volume of eluting solvent, elution time and pH value of sample solution. The optimal parameters for enrichment was as follows: dosage of adsorbent, 60 mg; adsorption time, 50min; sample pH, pH7; elutent, 9 mL mixture of methanol and acetone(1:1); elution time, 6min; sample volume, 60 mL. The experimental results demonstrated that the adsorption conformed to pseudo-second-order kinetic model and Langmuir adsorption isotherm model. The results showed the maximum adsorption capacities of BPS, TBBPA, BPA, BPAF and BPAP were 131.80 μgg^-1, 139.84 μgg^-1, 157.08 μgg^-1, 142.11 μgg^-1 and 134.23 μgg^-1, respectively. Under optimal conditions, BPS had good linear relationship over range from of 0.5-300 μgL^-1, and the linear ranges of BPA, TBBPA, BPAF and BPAP ranged from 0.1 to 300 μgL^-1. The limits of detection (S/N = 3) for BPs were good in range of 0.016-0.039 μgL^-1. The spiked recoveries of target bisphenols (BPs) in beverages were approving over range from 92.3% to 99.2%. The established method possessed merits of easy to operate, good sensitivity, rapidness as well as environmental friendliness, and which earned great application potential for the enrichment and detection of trace BPs in practical samples.

Natural-based coagulants/flocculants as sustainable market-valued products for industrial wastewater treatment: a review of recent developments

Industrial wastewater is categorized as a voracious consumer of fresh water and a high-strength source of pollution. Coagulation-flocculation is a simple and cost-effective technique for removing organic/inorganic compounds and colloidal particles from industrial effluents. Despite the outstanding natural properties, biodegradability, and efficacy of natural coagulants/flocculants (NC/Fs) in industrial wastewater treatment, their significant potential to remediate such effluents is underappreciated, particularly in commercial scale applications. Most reviews on NC/Fs focused on the possible application of plant-based sources such as plant seeds, tannin, certain vegetables/fruit peels, and their lab-scale potential. Our review expands the scope by examining the feasibility of using natural materials from other sources for industrial effluent decontamination. By analyzing the latest data on NC/Fs, we identify the most promising preparation techniques for making these materials stable enough to compete with traditional options in the marketplace. An interesting presentation of the results of various recent studies has also been highlighted and discussed. Additionally, we highlight the recent success of using magnetic-natural coagulants/flocculants (M-NC/Fs) in treating diverse industrial effluents, and discuss the potential for reprocessing spent materials as a renewable resource. The review also offers different concepts for suggested large-scale treatment systems used by MN-CFs.

Ni4 complex anchored porous silica for enhanced adsorption of organic pollutants in the wastewater

In the current study, tetranuclear Ni complex [Ni₄(LH)₄]·CH₃CN (1) (LH₃=(E)-2-(hydroxymethyl)-6-(((2-hydroxyphenyl)imino)methyl)phenol) was prepared and incorporated in sulfonic acid functionalized MCM-48 material. This composite nanoporous material was investigated for the adsorption of toxic cationic water pollutant dyes like crystal violet (CV) and methylene blue (MB) from the water solution. Thorough characterization was carried out using a variety of techniques, including NMR, ICP, powder XRD, TGA, SEM, BET, and FT-IR, to verify the phase purity, existence of guest moiety, material morphology, and other crucial variables. The adsorption property was increased with the metal complex immobilization on the porous support. The effect of various parameters on the adsorption process was discussed, including adsorbent dosage, temperature, pH, NaCl concentration, and contact time. Maximum dye adsorption was found at 0.2 mg/ml adsorbent dosage, 10 ppm dye concentration, 6-7 pH, 25 °C temperature, and 15 minutes of contact time. The adsorption of MB (methylene blue) and CV (crystal violet) dyes by Ni complex integrated MCM-48 was effective, with over 99% adsorption achieved in 15 minutes. A recyclability test was also performed, and the material is reusable up to the third cycle, with no notable decline in adsorption found. From the previous literature survey, it is clear that very high adsorption efficiency was achieved using MCM-48-SO₃-Ni in considerably short contact time which proves the novelty and effectiveness of the modified material. Ni₄ was prepared, characterized, and immobilized in sulfonic acid functionalized MCM-48, and this robust and reusable adsorbent was highly effective for the adsorption of methylene blue and crystal violet dyes with >99% adsorption efficiency in short duration.

In Silico Study of Novel Cyclodextrin Inclusion Complexes of Polycaprolactone and Its Correlation with Skin Regeneration

Three novel biomaterials obtained via inclusion complexes of β-cyclodextrin, 6-deoxi-6-amino-β-cyclodextrin and epithelial growth factor grafted to 6-deoxi-6-amino-β-cyclodextrin with polycaprolactone. Furthermore, some physicochemical, toxicological and absorption properties were predicted using bioinformatics tools. The electronic, geometrical and spectroscopical calculated properties agree with the properties obtained via experimental methods, explaining the behaviors observed in each case. The interaction energy was obtained, and its values were -60.6, -20.9 and -17.1 kcal/mol for β-cyclodextrin/polycaprolactone followed by the 6-amino-β-cyclodextrin-polycaprolactone complex and finally the complex of epithelial growth factor anchored to 6-deoxy-6-amino-β-cyclodextrin/polycaprolactone. Additionally, the dipolar moments were calculated, achieving values of 3.2688, 5.9249 and 5.0998 Debye, respectively, and in addition the experimental wettability behavior of the studied materials has also been explained. It is important to note that the toxicological predictions suggested no mutagenic, tumorigenic or reproductive effects; moreover, an anti-inflammatory effect has been shown. Finally, the improvement in the cicatricial effect of the novel materials has been conveniently explained by comparing the poly-caprolactone data obtained in the experimental assessments.

Cadmium-treatment efficiency and membrane fouling during electrodialysis of wastewater discharged from zinc smelting

Zinc smelting wastewater contains high concentrations of Cd. Here, the treatment efficiency of Cd using electrodialysis was evaluated. In addition, scale accumulation of ion-exchange membrane (IEM) was analyzed, and fouling control was studied. The results showed that spacers effectively improved the limiting current density but accelerated foulant accumulation. The Cd-treatment efficiency improved to 85.4% without a spacer. Dissolved organic carbon (DOC) and hydrophobic DOC levels in diluted water decreased by 0.65 mg L^-1 and 2.1 mg L^-1, respectively; in contrast, hydrophilic DOC level increased by 1.45 mg L^-1. Some of the hydrophobic DOC in the diluted water was converted to hydrophilic DOC and subsequently to low-molecular-weight (LMW) DOC. DOC level in the concentrated water did not change substantially, but the LMW fraction of the hydrophilic DOC increased. In the cation-exchange membrane, a material composed of calcium sulfate accumulated in the bottom layer, and hydroxides of divalent and trivalent ions accumulated on top of it. In contrast, the anion-exchange membrane was fouled by humic substances. In terms of fouling control, physical and acid cleaning of IEMs was more effective than the reversal operation.

Photocatalysts for a sustainable future: Innovations in large-scale environmental and energy applications

The growing environmental and energy crises have prompted researchers to seek new solutions, including large-scale photocatalytic environmental remediation and the production of solar hydrogen using photocatalytic materials. To achieve this goal, scientists have developed numerous photocatalysts with high efficiency and stability. However, the large-scale application of photocatalytic systems under real-world conditions is still limited. These limitations arise at every step, including the large-scale synthesis and deposition of photocatalyst particles on a solid support, and the development of an optimal design with high mass transfer and efficient photon absorption. The purpose of this article is to provide a detailed description of the primary challenges and potential solutions encountered in scaling up photocatalytic systems for use in large-scale water and air purification and solar hydrogen production. Additionally, based on a review of current pilot developments, we draw conclusions and make comparisons regarding the main operating parameters that affect performance, as well as propose strategies for future research.

The Performance Analysis of PSO-ResNet for the Fault Diagnosis of Vibration Signals Based on the Pipeline Robot

In the context of pipeline robots, the timely detection of faults is crucial in preventing safety incidents. In order to ensure the reliability and safety of the entire application process, robots' fault diagnosis techniques play a vital role. However, traditional diagnostic methods for motor drive end-bearing faults in pipeline robots are often ineffective when the operating conditions are variable. An efficient solution for fault diagnosis is the application of deep learning algorithms. This paper proposes a rolling bearing fault diagnosis method (PSO-ResNet) that combines a Particle Swarm Optimization algorithm (PSO) with a residual network. A number of vibration signal sensors are placed at different locations in the pipeline robot to obtain vibration signals from different parts. The input to the PSO-ResNet algorithm is a two-bit image obtained by continuous wavelet transform of the vibration signal. The accuracy of this fault diagnosis method is compared with different types of fault diagnosis algorithms, and the experimental analysis shows that PSO-ResNet has higher accuracy. The algorithm was also deployed on an Nvidia Jetson Nano and a Raspberry Pi 4B. Through comparative experimental analysis, the proposed fault diagnosis algorithm was chosen to be deployed on the Nvidia Jetson Nano and used as the core fault diagnosis control unit of the pipeline robot for practical scenarios. However, the PSO-ResNet model needs further improvement in terms of accuracy, which is the focus of future research work.

Efficient Adsorption of Tebuconazole in Aqueous Solution by Calcium Modified Water Hyacinth-Based Biochar: Adsorption Kinetics, Mechanism, and Feasibility

The application of fungicides (such as tebuconazole) can impose harmful impacts on the ecosystem and humans. In this study, a new calcium modified water hyacinth-based biochar (WHCBC) was prepared and its effectiveness for removing tebuconazole (TE) via adsorption from water was tested. The results showed that Ca was loaded chemically (CaC₂O₄) onto the surface of WHCBC. The adsorption capacity of the modified biochar increased by 2.5 times in comparison to that of the unmodified water hyacinth biochar. The enhanced adsorption was attributed to the improved chemical adsorption capacity of the biochar through calcium modification. The adsorption data were better fitted to the pseudo-second-order kinetics and the Langmuir isotherm model, indicating that the adsorption process was dominated by monolayer adsorption. It was found that liquid film diffusion was the main rate-limiting step in the adsorption process. The maximum adsorption capacity of WHCBC was 40.5 mg/g for TE. The results indicate that the absorption mechanisms involved surface complexation, hydrogen bonding, and π-π interactions. The inhibitory rate of Cu²⁺ and Ca²⁺ on the adsorption of TE by WHCBC were at 4.05-22.8%. In contrast, the presence of other coexisting cations (Cr⁶⁺, K⁺, Mg²⁺, Pb²⁺), as well as natural organic matter (humic acid), could promote the adsorption of TE by 4.45-20.9%. In addition, the regeneration rate of WHCBC was able to reach up to 83.3% after five regeneration cycles by desorption stirring with 0.2 mol/L HCl (t = 360 min). The results suggest that WHCBC has a potential in application for removing TE from water.

Degradation of Phenol via an Advanced Oxidation Process (AOP) with Immobilized Commercial Titanium Dioxide (TiO2) Photocatalysts

Four commercial titanium dioxide (TiO₂) photocatalysts, namely P25, P90, PC105, and PC500, were immobilized onto steel plates using a sol-gel binder and investigated for phenol degradation under 365 nm UV-LED irradiation. High-performance liquid chromatography (HPLC) and total organic carbon (TOC) analyses were performed to study the impact of three types of oxygen sources (air, dispersed synthetic air, and hydrogen peroxide) on the photocatalytic performance. The photocatalyst films were stable and there were significant differences in their performance. The best result was obtained with the P90/UV/H₂O₂ system with 100% degradation and about 70% mineralization within 3 h of irradiation. The operating conditions varied, showing that water quality is crucial for the performance. A wastewater treatment plant was developed based on the lab-scale results and water treatment costs were estimated for two cases of irradiation: UV-LED (about 600 EUR/m³) and sunlight (about 60 EUR/m³). The data show the high potential of immobilized photocatalysts for pollutant degradation under advanced oxidation process (AOP) conditions, but there is still a need for optimization to further reduce treatment costs.

Preparation of phosphoric-modified aloe vera/chitosan aerogels and their efficient adsorption of U(VI)

The efficient adsorption of radioactive elements from nuclear wastewater is an important research topic in the environmental field. The unique three-dimensional porous structure of aerogels has great potential in the field of adsorption. Phosphoric-modified aloe vera/chitosan aerogel (CS/AL-AP) was prepared from chitosan, phosphoric acid, and aloe powder by vacuum freeze-drying self-assembly. The maximum adsorption of uranyl ions by CS/AL-AP was found to be 322.34 mg/g at pH 6, adsorption time of 120 min, solid-to-liquid ratio of 0.125 g/L, reaction temperature of 303 K, and initial uranyl ion concentration of 50 mg/L. The adsorption process is consistent with the Langmuir isotherm model and the quasi-secondary kinetic model, indicating that the adsorption process is monolayer adsorption. The type of adsorption is mainly chemisorption. FTIR and XPS analyses indicate that the adsorption of U(VI) by CS/AL-AP results from the combined action of coordination or chelation of amino, hydroxyl, and carboxyl groups. In addition, CS/AL-AP shows excellent adsorption capacity in the presence of complex co-existing ions. After five adsorption-desorption experiments, the adsorption capacity of CS/AL-AP for uranyl ions remained at a high level. It indicates that CS/AL-AP has good stability and recoverability. The results indicate that CS/AL-AP has excellent potential in the field of uranium removal.