Minimising Blood Stream Infection: Developing New Materials for Intravascular Catheters

Preventive Activity of an Arginine-Based Surfactant on the Formation of Mixed Biofilms of Fluconazole-Resistant Candida albicans and Extended-Spectrum-Beta-Lactamase-Producing Escherichia coli on Central Venous Catheters

Background/Objectives: Mixed bloodstream infections associated with central venous catheter (CVC) use are a growing problem. The aim of this study was to evaluate the activity of a cationic arginine-based gemini surfactant, C9(LA)2, against mixed biofilms of fluconazole-resistant Candida albicans and extended-spectrum beta-lactamase (ESBL)-producing E. coli, and the preventive effect of this surfactant impregnated in CVCs on the formation of inter-kingdom biofilms. Methods: Broth microdilution assays were performed along with evaluation of the effect against mixed biofilms in formation. The impregnation of CVCs with the surfactant and with a hydrogel containing the cationic surfactant was investigated to assess their potential to prevent the formation of mixed biofilms. Scanning electron microscopy (SEM) was also utilized. Results: Minimum inhibitory concentrations (MICs) for resistant C. albicans ranged from 4-5.3 µg/mL, while for E. coli, the MICs varied from 85.3 to 298.7 µg/mL. Fungicidal and bactericidal action patterns were obtained. In mixed biofilm formation in 96-well plates, there was a significant reduction in the colony-forming unit (CFU) count. The impregnation of the CVC with C9(LA)2 alone resulted in a biofilm reduction of 62% versus C. albicans and 48.7% against E. coli in terms of CFUs. When the CVC was impregnated with the surfactant hydrogel, the effect was improved with an inhibition of 71.7% for C. albicans and 86.7% for E. coli. The images obtained by SEM corroborated the results. Conclusions: C9(LA)2 has potential for use in CVC impregnation to prevent the formation of mixed biofilms of fluconazole-resistant C. albicans and ESBL-producing E. coli.

Medical Device-Associated Biofilm Infections and Multidrug-Resistant Pathogens

Medical devices such as venous catheters (VCs) and urinary catheters (UCs) are widely used in the hospital setting. However, the implantation of these devices is often accompanied by complications. About 60 to 70% of nosocomial infections (NIs) are linked to biofilms. The main complication is the ability of microorganisms to adhere to surfaces and form biofilms which protect them and help them to persist in the host. Indeed, by crossing the skin barrier, the insertion of VC inevitably allows skin flora or accidental environmental contaminants to access the underlying tissues and cause fatal complications like bloodstream infections (BSIs). In fact, 80,000 central venous catheters-BSIs (CVC-BSIs)-mainly occur in intensive care units (ICUs) with a death rate of 12 to 25%. Similarly, catheter-associated urinary tract infections (CA-UTIs) are the most commonlyhospital-acquired infections (HAIs) worldwide.These infections represent up to 40% of NIs.In this review, we present a summary of biofilm formation steps. We provide an overview of two main and important infections in clinical settings linked to medical devices, namely the catheter-asociated bloodstream infections (CA-BSIs) and catheter-associated urinary tract infections (CA-UTIs), and highlight also the most multidrug resistant bacteria implicated in these infections. Furthermore, we draw attention toseveral useful prevention strategies, and advanced antimicrobial and antifouling approaches developed to reduce bacterial colonization on catheter surfaces and the incidence of the catheter-related infections.

Hydrophilic biomaterial intravenous hydrogel catheter for complication reduction in PICC and midline catheters

INTRODUCTION

More than 30% of peripherally inserted central catheters (PICCs) and midline catheters experience complications. Most complications are related to thrombotic cellular adherence to catheter materials.

AREAS COVERED

This manuscript outlines PICC and midline catheter complications, the need to reduce complications and how hydrogel catheters may provide a solution to address these unmet needs based on available evidence.

EXPERT OPINION

Patients commonly require PICC or midline catheters for treatment to establish a reliable form of intravenous access. Catheters, while reliable in most cases, are not without complications, including occlusion, thrombosis and infection, each related to cellular adherence to the catheter material. Hydrophilic catheter coatings and composites have been developed to mitigate these thrombotic complications, reduce adherence of blood and bacterial cells to catheters and provide greater patient safety with these devices. Hydrogel materials are highly biocompatible and have been effective in reducing cellular adherence and the formation of biofilms on surfaces. Smooth hydrophilic catheter surfaces are potentially more comfortable for the patient, with reduced friction during insertion and removal. A catheter constructed of hydrophilic biomaterial, a hydrogel composite material, may minimize thrombotic complications in PICC and midline catheters, improving catheter performance and outcomes for patients.

KiteLock 4%: the next generation of CVAD locking solutions

Central venous access devices (CVADs), including peripherally inserted central catheters (PICCs) and cuffed tunnelled catheters, play a crucial role in modern medicine by providing reliable access for medication and treatments directly into the bloodstream. However, these vital medical devices also pose a significant risk of catheter-related bloodstream infections (CRBSIs) alongside associated complications such as thrombosis or catheter occlusion. To mitigate these risks, healthcare providers employ various strategies, including the use of locking solutions in combination with meticulous care and maintenance protocols. KiteLock 4% catheter lock is a solution designed to combat the triple threat of infection, occlusion and biofilm. This locking solution is described as the only locking solution to provide cover for all three complications.

Integration of Riboflavin-Modified Carbon Fiber Mesh Electrode Systems in a 3D-Printed Catheter Hub

BACKGROUND

Catheter line infection is a common complication within clinical environments, and there is a pressing need for technological options to aid in reducing the possibility of sepsis. The early identification of contamination could be pivotal in reducing cases and improving outcomes.

METHOD

A sensing rationale based on a riboflavin-modified electrode system integrated within a modified 3D-printed catheter needle-free connector is proposed, which can monitor changes in pH brought about by bacterial contamination.

RESULTS

Riboflavin, vitamin B2, is a biocompatible chemical that possesses a redox-active flavin core that is pH dependent. The oxidation peak potential of the adsorbed riboflavin responds linearly to changes in pH with a near-Nernstian behavior of 63 mV/pH unit and is capable of accurately monitoring the pH of an authentic IV infusate.

CONCLUSIONS

The proof of principle is demonstrated with an electrode-printed hub design offering a valuable foundation from which to explore bacterial interactions within the catheter lumen with the potential of providing an early warning of contamination.

Phyto-assisted synthesis of zinc oxide nanoparticles for developing antibiofilm surface coatings on central venous catheters

Medical devices such as Central Venous Catheters (CVCs), are routinely used in intensive and critical care settings. In the present scenario, incidences of Catheter-Related Blood Stream Infections (CRBSIs) pose a serious challenge. Despite considerable advancements in the antimicrobial therapy and material design of CVCs, clinicians continue to struggle with infection-related complications. These complications are often due colonization of bacteria on the surface of the medical devices, termed as biofilms, leading to infections. Biofilm formation is recognized as a critical virulence trait rendering infections chronic and difficult to treat even with 1,000x, the minimum inhibitory concentration (MIC) of antibiotics. Therefore, non-antibiotic-based solutions that prevent bacterial adhesion on medical devices are warranted. In our study, we report a novel and simple method to synthesize zinc oxide (ZnO) nanoparticles using ethanolic plant extracts of Eupatorium odoratum. We investigated its physio-chemical characteristics using Field Emission- Scanning Electron Microscopy and Energy dispersive X-Ray analysis, X-Ray Diffraction (XRD), Photoluminescence Spectroscopy, UV-Visible and Diffuse Reflectance spectroscopy, and Dynamic Light Scattering characterization methods. Hexagonal phase with wurtzite structure was confirmed using XRD with particle size of ∼50 nm. ZnO nanoparticles showed a band gap 3.25 eV. Photoluminescence spectra showed prominent peak corresponding to defects formed in the synthesized ZnO nanoparticles. Clinically relevant bacterial strains, viz., Proteus aeruginosa PAO1, Escherichia coli MTCC 119 and Staphylococcus aureus MTCC 7443 were treated with different concentrations of ZnO NPs. A concentration dependent increase in killing efficacy was observed with 99.99% killing at 500 μg/mL. Further, we coated the commercial CVCs using green synthesized ZnO NPs and evaluated it is in vitro antibiofilm efficacy using previously optimized in situ continuous flow model. The hydrophilic functionalized interface of CVC prevents biofilm formation by P. aeruginosa, E. coli and S. aureus. Based on our findings, we propose ZnO nanoparticles as a promising non-antibiotic-based preventive solutions to reduce the risk of central venous catheter-associated infections.

Impact of mechanical stress on flexible tubing used for biomedical applications: Characterization of the damages and impact on the patient's health

Flexible tubing is a key part of a lot of medical devices used in hospital, but may be subjected to a lot of various mechanical stresses that can led to the failure or to complications for the patients. The nature and causes of these mechanical stresses were listed for peristaltic pump tubing, infusion set tubing and catheters. Their consequences in term of tubing damages and particular contamination were reported. The impact of the chemical nature of the tubing, of its size and also the impact of various parameters of the clinical acts were reviewed. Last the consequences for the patient's health were discussed.

[Update of the recommendations of the Bacteraemia Zero Project]

El proyecto Bacteriemia Zero (BZ) fue el primero de los Proyectos Zero que se implementó en las Unidades de Cuidados Intensivos (UCI), consiguiendo una disminución de las tasas de infección relacionadas con catéter por debajo de las recomendadas por los estándares de calidad de las sociedades científicas. A raíz de la pandemia causada por el SARS-CoV-2 en las UCI, se ha observado un incremento importante de estas tasas de infección. El incremento de las tasas de infección y la necesidad de incorporar en la práctica clínica la mejor evidencia disponible, justifica la necesidad de actualizar las recomendaciones del proyecto BZ. Se constituyó un grupo de trabajo formado por miembros de las diferentes sociedades científicas que consideró que el paquete de medidas obligatorias del proyecto no debía modificarse debido a su eficacia demostrada y decidió incorporar, después de su revisión, las siguientes medidas opcionales: uso de catéteres impregnados con antimicrobianos, uso de apósitos impregnados con clorhexidina, uso de tapones con solución antiséptica en los conectores e higiene corporal diaria con clorhexidina.

A Niclosamide-releasing hot-melt extruded catheter prevents Staphylococcus aureus experimental biomaterial-associated infection

Biomaterial-associated infections are a major healthcare challenge as they are responsible for high disease burden in critically ill patients. In this study, we have developed drug-eluting antibacterial catheters to prevent catheter-related infections. Niclosamide (NIC), originally an antiparasitic drug, was incorporated into the polymeric matrix of thermoplastic polyurethane (TPU) via solvent casting, and catheters were fabricated using hot-melt extrusion technology. The mechanical and physicochemical properties of TPU polymers loaded with NIC were studied. NIC was released in a sustained manner from the catheters and exhibited in vitro antibacterial activity against Staphylococcus aureus and Staphylococcus epidermidis. Moreover, the antibacterial efficacy of NIC-loaded catheters was validated in an in vivo biomaterial-associated infection model using a methicillin-susceptible and methicillin-resistant strain of S. aureus. The released NIC from the produced catheters reduced bacterial colonization of the catheter as well as of the surrounding tissue. In summary, the NIC-releasing hot-melt extruded catheters prevented implant colonization and reduced the bacterial colonization of peri-catheter tissue by methicillin sensitive as well as resistant S. aureus in a biomaterial-associated infection mouse model and has good prospects for preclinical development.

Even the Simplest Devices May Malfunction: Split Septum Design Revisited

Split septum medical devices are used in tubing for intravenous (IV) fluid administration-an extremely common clinical task. These tubing caps contain a needleless, valveless system that allows fluid to flow directly through the lumen of the catheter but prevents backflow of fluid or blood when the tubing extension is not connected. We experienced complete failure of a needle-free connector extension set with a Luer-access split septum device in multiple patients due to the split septum remaining fused and essentially unsplit despite being connected on both ends. This led to an adverse event in a patient due to repeated unnecessary IV insertion attempts. This case shows how even the simplest of devices can malfunction and highlights the need for vigilance in clinical practice.

Even the Simplest Devices May Malfunction: Split Septum Design Revisited

Split septum medical devices are used in tubing for intravenous (IV) fluid administration-an extremely common clinical task. These tubing caps contain a needleless, valveless system that allows fluid to flow directly through the lumen of the catheter but prevents backflow of fluid or blood when the tubing extension is not connected. We experienced complete failure of a needle-free connector extension set with a Luer-access split septum device in multiple patients due to the split septum remaining fused and essentially unsplit despite being connected on both ends. This led to an adverse event in a patient due to repeated unnecessary IV insertion attempts. This case shows how even the simplest of devices can malfunction and highlights the need for vigilance in clinical practice.