Cu(I/II) Metal-Organic Frameworks Incorporated Nanofiltration Membranes for Organic Solvent Separation

Triazole-Based Cu(I) Cationic Metal-Organic Frameworks with Lewis Basic Pyridine Sites for Selective Detection of Ce3+ Ions

A highly symmetric bis-triazole-pyridine-based organic ligand, i.e., 3,5-di(4H-1,2,4-triazol-4-yl)pyridine (L), and Cu(II) salts were used to synthesize three cationic Cu(I) metal-organic frameworks (MOFs), namely, {[Cu(L)]·(NO₃)·(H₂O)}_n (1), {[Cu(L)]·(BF₄)·0.5H₂O}_n (2), and {[Cu_1.25(L)]·1.25(ClO₄)·H₂O}_n (3). All three MOFs have nonbonded anions situated inside the pore spaces. Both 1 and 2 have a two-dimensional network structure, while 3 has a three-dimensional structure. All three MOFs were characterized using Fourier transform infrared spectroscopy, elemental (C, H, and N) analysis, thermogravimetric analysis, and powder and single-crystal X-ray diffraction. Due to the presence of a Lewis basic pyridine moiety, these MOFs could serve as luminescent probes for the selective detection of Ce³⁺ ions with excellent efficiency (10^-7 M). The synthesis of Cu(I)-based MOFs and their use to detect Ce³⁺ ions in water via a turn-on fluorescence process have rarely been reported. These MOFs are highly stable in water, are recyclable, and function efficiently at different pH values.

Fabrication of a Cation-Exchange Membrane via the Blending of SPES/N-Phthaloyl Chitosan/MIL-101(Fe) Using Response Surface Methodology for Desalination

In the present work, a novel mixed matrix cation exchange membrane composed of sulfonated polyether sulfone (SPES), N-phthaloyl chitosan (NPHCs) and MIL-101(Fe) was synthesized using response surface methodology (RSM). The electrochemical and physical properties of the membrane, such as ion exchange capacity, water content, morphology, contact angle, fixed ion concentration and thermal stability were investigated. The RSM based on the Box–Behnken design (BBD) model was employed to simulate and evaluate the influence of preparation conditions on the properties of CEMs. The regression model was validated via the analysis of variance (ANOVA) which exhibited a high reliability and accuracy of the results. Moreover, the experimental data have a good fit and high reproducibility with the predicted results according to the regression analysis. The embedding of MIL-101(Fe) nanoparticles contributed to the improvement of ion selective separation by forming hydrogen bonds with the polymer network in the membrane. The optimum synthesis parameters such as degree of sulfonation (DS), the content of SPES and NPHCs and the content of MIL-101(Fe) were acquired to be 30%, 85:15 and 2%, respectively, and the corresponding desalination rate of the CEMs improved to 136% while the energy consumption reduced to 90%. These results revealed that the RSM was a promising strategy for optimizing the preparation factors of CEMs and other similar multi-response optimization studies.

Novel Mixed Matrix Membranes Based on Polymer of Intrinsic Microporosity PIM-1 Modified with Metal-Organic Frameworks for Removal of Heavy Metal Ions and Food Dyes by Nanofiltration

Nowadays, nanofiltration is widely used for water treatment due to its advantages, such as energy-saving, sustainability, high efficiency, and compact equipment. In the present work, novel nanofiltration membranes based on the polymer of intrinsic microporosity PIM-1 modified by metal-organic frameworks (MOFs)-MIL-140A and MIL-125-were developed to increase nanofiltration efficiency for the removal of heavy metal ions and dyes. The structural and physicochemical properties of the developed PIM-1 and PIM-1/MOFs membranes were studied by the spectroscopic technique (FTIR), microscopic methods (SEM and AFM), and contact angle measurement. Transport properties of the developed PIM-1 and PIM-1/MOFs membranes were evaluated in the nanofiltration of the model and real mixtures containing food dyes and heavy metal ions. It was found that the introduction of MOFs (MIL-140A and MIL-125) led to an increase in membrane permeability. It was demonstrated that the membranes could be used to remove and concentrate the food dyes and heavy metal ions from model and real mixtures.

Continuous MOF Membrane-Based Sensors via Functionalization of Interdigitated Electrodes

Three M-MOF-74 (M = Co, Mg, Ni) metal-organic framework (MOF) thin film membranes have been synthesized through a sensor functionalization method for the direct electrical detection of NO₂. The two-step surface functionalization procedure on the glass/Pt interdigitated electrodes resulted in a terminal carboxylate group, with both steps confirmed through infrared spectroscopic analysis. This surface functionalization allowed the MOF materials to grow largely in a uniform manner over the surface of the electrode forming a thin film membrane over the Pt sensing electrodes. The growth of each membrane was confirmed through scanning electron microscopy (SEM) and X-ray diffraction analysis. The Ni and Mg MOFs grew as a continuous but non-defect free membrane with overlapping polycrystallites across the glass surface, whereas the Co-MOF-74 grew discontinuously. To demonstrate the use of these MOF membranes as an NO₂ gas sensor, Ni-MOF-74 was chosen as it was consistently fabricated as the best thin and homogenous membrane, as confirmed by SEM. The membrane was exposed to 5 ppm NO₂ and the impedance magnitude was observed to decrease 123× in 4 h, with a larger change in impedance and a faster response than the bulk material. Importantly, the use of these membranes as a sensor for NO₂ does not require them to be defect-free, but solely continuous and overlapping growth.

A novel copper(i) metal–organic framework as a highly efficient and ultrasensitive electrochemical platform for detection of Hg(ii) ions in aqueous solution

A novel copper(i) metal–organic framework was constructed and used to modify a glassy carbon electrode, and exhibits excellent electrochemical sensing of Hg(ii) ions.