Methodologies for Fabricating Flexible Supercapacitors

Composite of CoS1.97 nanoparticles decorated CuS hollow cubes with rGO as thin film electrode for high-performance all solid flexible supercapacitors

Stretchable flexible thin-film electrodes are extensively explored for developing new wearable energy storage devices. However, traditional carbon-based materials used in such independent electrodes have limited practical applications owing to their low energy storage capacity and energy density. To address this, a unique structure and remarkable mechanical stability thin-film flexible positive electrode comprising CoS1.97 nanoparticles decorated hollow CuS cubes and reduced graphene oxide (rGO), hereinafter referred to as CCSrGO, is prepared. Transition metal sulfide CoS1.97 and CuS shows high energy density owing to the synergistic effects of its active components. The electrode can simultaneously meet the high-energy density and safety requirements of new wearable energy storage devices. The electrode has excellent electrochemical performance (1380 F/g at 1 A/g) and ideal capacitance retention (93.8 % after 10,000 cycles) owing to its unique three-dimensional hollow structure and polymetallic synergies between copper and cobalt elements, which are attributed to their different energy storage mechanisms. Furthermore, a flexible asymmetric supercapacitor (FASC) was constructed using CCSrGO as the positive electrode and rGO as the negative electrode (CCSrGO//rGO), which delivers an energy density of 100 Wh kg-1 and a corresponding power density of 2663 W kg-1 within a voltage window of 0-1.5 V. The resulting FASC can power a light-emitting diode (LED) at different bending and twisting angles, exerting little effect on the capacitance. Therefore, the prepared CCSrGO//rGO FASC devices show great application prospects in energy storage.

SCOBY-based bacterial cellulose as free standing electrodes for safer, greener and cleaner energy storage technology

Bacterial Cellulose (BC) derived from local market or symbiotic culture of bacteria and yeast (SCOBY) was employed as the polymer matrix for hydroxyl multi-walled carbon nanotube (MWCNT-OH)-based electrochemical double-layer capacitor (EDLC). Chitosan (CS)-sodium iodide (NaI)-glycerol (Gly) electrolyte systems were used as the polymer electrolyte. CS-NaI-Gly electrolyte possesses conductivity, potential stability and ionic transference number of (1.20 ± 0.26) × 10^-3 S cm^-2, 2.5 V and 0.99, respectively. For the electrodes, MWCNT-OH was observed to be well dispersed in the matrix of BC which was obtained via FESEM analysis. The inclusion of MWCNT-OH reduced the crystallinity of the BC polymeric structure. From EIS measurement, it was verified that the presence of MWCNT-OH decreased the electron transfer resistance of BC-based electrodes. Cyclic voltammetry (CV) showed that the shape of the CV plots changed to a rectangular-like shape plot as more MWCNT were added, thus verifying the capacitive behavior. Various amount of MWCNT-OH was used in the fabrication of the EDLC where it was discovered that more MWCNT-OH leads to a better EDLC performance. The EDLC was tested for 5000 complete charge-discharge cycles. The optimum performance of this low voltage EDLC was obtained with 0.1 g MWCNT where the average specific capacitance was 8.80 F g^-1. The maximum power and energy density of the fabricated EDLC were 300 W kg^-1 and 1.6 W h kg^-1, respectively.

Sustainable and Printable Nanocellulose-Based Ionogels as Gel Polymer Electrolytes for Supercapacitors

A new gel polymer electrolyte (GPE) based supercapacitor with an ionic conductivity up to 0.32–0.94 mS cm⁻² has been synthesized from a mixture of an ionic liquid (IL) with nanocellulose (NC). The new NC-ionogel was prepared by combining the IL 1-ethyl-3-methylimidazolium dimethyl phosphate (EMIMP) with carboxymethylated cellulose nanofibers (CNFc) at different ratios (CNFc ratio from 1 to 4). The addition of CNFc improved the ionogel properties to become easily printable onto the electrode surface. The new GPE based supercapacitor cell showed good electrochemical performance with specific capacitance of 160 F g⁻¹ and an equivalent series resistance (ESR) of 10.2 Ω cm⁻² at a current density of 1 mA cm⁻². The accessibility to the full capacitance of the device is demonstrated after the addition of CNFc in EMIMP compared to the pristine EMIMP (99 F g⁻¹ and 14.7 Ω cm⁻²).