Glassy Microspheres for Energy Applications

Waste Glass Upcycling Supported by Alkali Activation: An Overview

Alkali-activated materials are gaining much interest due to their outstanding performance, including their great resistance to chemical corrosion, good thermal characteristics, and ability to valorise industrial waste materials. Reusing waste glasses in creating alkali-activated materials appears to be a viable option for more effective solid waste utilisation and lower-cost products. However, very little research has been conducted on the suitability of waste glass as a prime precursor for alkali activation. This study examines the reuse of seven different types of waste glasses in the creation of geopolymeric and cementitious concretes as sustainable building materials, focusing in particular on how using waste glasses as the raw material in alkali-activated materials affects the durability, microstructures, hydration products, and fresh and hardened properties in comparison with using traditional raw materials. The impacts of several vital parameters, including the employment of a chemical activator, gel formation, post-fabrication curing procedures, and the distribution of source materials, are carefully considered. This review will offer insight into an in-depth understanding of the manufacturing and performance in promising applications of alkali-activated waste glass in light of future uses. The current study aims to provide a contemporary review of the chemical and structural properties of glasses and the state of research on the utilisation of waste glasses in the creation of alkali-activated materials.

A Biomimetic Lignocellulose Aerogel-Based Membrane for Efficient Phenol Extraction from Water

Rapid extraction and concentration systems based on green materials such as cellulose or lignin are promising. However, there is still a need to optimize the material properties and production processes. Unlike conventional cellulose or lignin sorbent materials, aquatic reed root cells can concentrate external organic pollutants in the water and accumulate them in the plant. Inspired by this, a new nanocellulose-lignin aerogel (NLAG) was designed, in which nanocellulose was used as a substrate and lignin and polyamide epoxy chloropropane were used to crosslink cellulose in order to enhance the strength of the NLGA, resulting in good mechanical stability and water-oil amphiphilic properties. In practical applications, the organic membrane on the NLAG can transport organic pollutants from water to the NLAG, where they are immobilized. This is evidenced by the fact that the aerogel can remove more than 93% of exogenous phenol within a few minutes, highly enriching it inside. In addition, the aerogel facilitates filtration and shape recovery for reuse. This work establishes a novel biopolymer-aerogel-based extraction system with the advantages of sustainability, high efficiency, stability, and easy detachability, which are hard for the traditional adsorbent materials to attain.

Research on the Sound Insulation Performance of Composite Rubber Reinforced with Hollow Glass Microsphere Based on Acoustic Finite Element Simulation

The composite rubber reinforced with hollow glass microsphere (HGM) was a promising composite material for noise reduction, and its sound insulation mechanism was studied based on an acoustic finite element simulation to gain the appropriate parameter with certain constraint conditions. The built simulation model included the air domain, polymer domain and inorganic particles domain. The sound insulation mechanism of the composite material was investigated through distributions of the sound pressure and sound pressure level. The influences of the parameters on the sound transmission loss (STL) were researched one by one, such as the densities of the composite rubber and HGM, the acoustic velocities in the polymer and inorganic particle, the frequency of the incident wave, the thickness of the sound insulator, and the diameter, volume ratio and hollow ratio of the HGM. The weighted STL with the 1/3 octave band was treated as the evaluation criterion to compare the sound insulation property with the various parameters. For the limited thicknesses of 1 mm, 2 mm, 3 mm and 4 mm, the corresponding optimal weighted STL of the composite material reached 14.02 dB, 19.88 dB, 22.838 dB and 25.27 dB with the selected parameters, which exhibited an excellent sound insulation performance and could promote the practical applications of the proposed composite rubber reinforced with HGM.

Porous Glass Microspheres from Alkali-Activated Fiber Glass Waste

Fiber glass waste (FGW) was subjected to alkali activation in an aqueous solution with different concentrations of sodium/potassium hydroxide. The activated materials were fed into a methane–oxygen flame with a temperature of around 1600 °C. X-ray diffraction analysis confirmed the formation of several hydrated compounds, which decomposed upon flame synthesis, leading to porous glass microspheres (PGMs). Pore formation was favored by using highly concentrated activating alkali solutions. The highest homogeneity and yield of PGMs corresponded to the activation with 9 M KOH aqueous solution.

Editorial for the Special Issue on Glassy Materials Based Microdevices

Glassy materials, i.e., glasses and most polymers, play a very important role in microtechnologies and photonics[...].