Water-Transmitted Fungi are Involved in Degradation of Concrete Drinking Water Storage Tanks

Potable water as a source of intermediate and borderline-resistant Aspergillus and Candida strains

The World Health Organization calls to assess possible health risks from emerging fungi originating not only from hospitals but also from the natural environment. Fungal contamination in oligotrophic water systems represents a public health concern due to the potential for the emergence of antifungal-resistant strains. This study focused on the identification of Aspergillus spp. and Candida spp. isolated from different water sources and materials in contact with water. Isolated strains have been tested against nine antifungals to assess the prevalence of resistance in these strains. Only one strain of Aspergillus protuberus was resistant to amphotericin B. On the other hand, all Candida strains were intermediately resistant to anidulafungin and micafungin, 5.8% were borderline resistant to 5-flucytosine and fluconazole, and 3% to voriconazole. Candida parapsilosis sensu stricto isolated from water samples had statistically higher minimal inhibitory concentration (MIC) for anidulafungin than clinical strains and clinical strains had statistically higher MIC for itraconazole. Statistical analysis pointed out habitat to be significant for higher MIC in C. parapsilosis. Our findings show that borderline-resistant strains can be transferred by water; thus, potable water should be considered as a possible source of resistant strains in hospitals and healthcare units.

Enhanced Specificity in Colorimetric LAMP Assay for Sarocladium kiliense Detection Using a Combination of Two Additives

The genus Sarocladium comprises fungal species closely related to Acremonium, with S. kiliense and S. strictum being medically important. These species can cause infections in both immunocompetent and immunocompromised individuals. The current detection methods are limited, prompting the need for rapid and specific diagnostic tools. We developed a colorimetric loop-mediated isothermal amplification (LAMP) assay targeting S. kiliense (SK-LAMP). The initial prototype assay faced challenges with cross-reactivities with closely related species. To address this, we incorporated two additives, pullulan and tetramethylammonium chloride (TMAC), which are known to reduce non-specific signals in amplification assays. Our study found that a combination of 1% (v/v) pullulan and 0.03 M TMAC enhanced the specific detection of S. kiliense in a 45 min reaction, without non-specific false-positive results for other fungal species. This optimised LAMP assay demonstrated high sensitivity and specificity, offering a reliable and rapid method for detecting S. kiliense. The novel approach of combining additives to enhance assay specificity presents a promising strategy for improving LAMP assays targeting closely related fungal species. This advancement can aid in the timely diagnosis and management of infections caused by S. kiliense, contributing to better patient outcomes and infection control.

Effect of Location, Disinfection, and Building Materials on the Presence and Richness of Culturable Mycobiota through Oligotrophic Drinking Water Systems

Safe drinking water is a constant challenge due to global environmental changes and the rise of emerging pathogens-lately, these also include fungi. The fungal presence in water greatly varies between sampling locations. Little is known about fungi from water in combination with a selection of materials used in water distribution systems. Our research was focused on five water plants located in the Pannonian Plain, Slovenia. Sampled water originated from different natural water sources and was subjected to different cleaning methods before distribution. The average numbers of fungi from natural water, water after disinfection, water at the first sampling point in the water network, and water at the last sampling point were 260, 49, 64, and 97 CFU/L, respectively. Chlorination reduced the number of fungi by a factor of 5, but its effect decreased with the length of the water network. The occurrence of different fungi in water and on materials depended on the choice of material. The presence of the genera Aspergillus, Acremonium, Furcasterigmium, Gliomastix, and Sarocladium was mostly observed on cement, while Cadophora, Cladosporium, Cyphellophora, and Exophiala prevailed on metals. Plastic materials were more susceptible to colonization with basidiomycetous fungi. Opportunistically pathogenic fungi were isolated sporadically from materials and water and do not represent a significant health risk for water consumers. In addition to cultivation data, physico-chemical features of water were measured and later processed with machine learning methods, revealing the sampling location and water cleaning processes as the main factors affecting fungal presence and richness in water and materials in contact with water.

Hidden risks: Simulated leakage of domestic sewage to secondary water supply systems poses serious microbiological risks

There are continuous reports about the pollution of the secondary water supply systems (SWSSs), among which domestic sewage leakage is the most serious. In this study, a pilot experiment lasting 70 days was conducted to explore the changes in physicochemical water quality and the microbial profiles in SWSSs polluted by different doses of domestic sewage through qPCR and high-throughput sequencing methods. The results showed that when domestic sewage entered the simulated water storage tank, a large amount of organic matter brought by domestic sewage quickly consumed chlorine disinfectants. High pollution levels (pollution index ≥ 1/1000) were accompanied by significant increases in turbidity and ammonia nitrogen concentration (p < 0.05) and by abnormal changes in sensory properties. Although different microbial community structures were found only at high pollution levels, qPCR results showed that the abundance of the bacterial 16S rRNA gene and some pathogenic gene markers in the polluted tank increased with the pollution level, and the specific gene marker of pathogens could be detected even at imperceptible pollution levels. In particular, the high detection frequency and abundance of Escherichia coli and Enterococcus faecails in polluted tank water samples demonstrated that they can be used for early warning. Moreover, it seems that the microorganisms that came with the domestic sewage lost their cultivability soon after entering SWSSs but could recover their activities during stagnation. In addition, the biofilm biomass in the polluted tank with high pollution levels increased faster at the initial stage, while after a longer contact time, it tended to remain at the same level as the control tank. This study emphasized the high microbial risk introduced by sewage water leakage even at imperceptible levels and could provide scientific suggestions for early warning and prevention of pollution to SWSSs.

Soil Microbial Community Composition and Tolerance to Contaminants in an Urban Brownfield Site

Brownfields are unused sites that contain hazardous substances due to previous commercial or industrial use. The sites are inhospitable for many organisms, but some fungi and microbes can tolerate and thrive in the nutrient-depleted and contaminated soils. However, few studies have characterized the impacts of long-term contamination on soil microbiome composition and diversity at brownfields. This study focuses on an urban brownfield-a former rail yard in Los Angeles that is contaminated with heavy metals, volatile organic compounds, and petroleum-derived pollutants. We anticipate that heavy metals and organic pollutants will shape soil microbiome diversity and that several candidate fungi and bacteria will be tolerant to the contaminants. We sequence three gene markers (16S ribosomal RNA, 18S ribosomal RNA, and the fungal internal transcribed spacer (FITS)) in 55 soil samples collected at five depths to (1) profile the composition of the soil microbiome across depths; (2) determine the extent to which hazardous chemicals predict microbiome variation; and (3) identify microbial taxonomic groups that may metabolize these contaminants. Detected contaminants in the samples included heavy metals, petroleum hydrocarbons, polycyclic aromatic hydrocarbons, and volatile organic compounds. Bacterial, eukaryotic, and fungal communities all varied with depth and with concentrations of arsenic, chromium, cobalt, and lead. 18S rRNA microbiome richness and fungal richness were positively correlated with lead and cobalt levels, respectively. Furthermore, bacterial Paenibacillus and Iamia, eukaryotic Actinochloris, and fungal Alternaria were enriched in contaminated soils compared to uncontaminated soils and represent taxa of interest for future bioremediation research. Based on our results, we recommend incorporating DNA-based multi-marker microbial community profiling at multiple sites and depths in brownfield site assessment standard methods and restoration.

Identifying Eukaryotes and Factors Influencing Their Biogeography in Drinking Water Metagenomes

The biogeography of eukaryotes in drinking water systems is poorly understood relative to that of prokaryotes or viruses, limiting the understanding of their role and management. A challenge with studying complex eukaryotic communities is that metagenomic analysis workflows are currently not as mature as those that focus on prokaryotes or viruses. In this study, we benchmarked different strategies to recover eukaryotic sequences and genomes from metagenomic data and applied the best-performing workflow to explore the factors affecting the relative abundance and diversity of eukaryotic communities in drinking water distribution systems (DWDSs). We developed an ensemble approach exploiting k-mer- and reference-based strategies to improve eukaryotic sequence identification and identified MetaBAT2 as the best-performing binning approach for their clustering. Applying this workflow to the DWDS metagenomes showed that eukaryotic sequences typically constituted small proportions (i.e., <1%) of the overall metagenomic data with higher relative abundances in surface water-fed or chlorinated systems with high residuals. The α and β diversities of eukaryotes were correlated with those of prokaryotic and viral communities, highlighting the common role of environmental/management factors. Finally, a co-occurrence analysis highlighted clusters of eukaryotes whose members' presence and abundance in DWDSs were affected by disinfection strategies, climate conditions, and source water types.

A survey on heavy metal concentrations in residential neighborhoods: The influence of secondary water supply systems

Water quality deterioration often occurs in secondary water supply systems (SWSSs), and increased heavy metal concentrations can be a serious problem. In this survey, twelve residential neighborhoods were selected to investigate the influence of SWSSs on the seasonal changes in heavy metal concentrations from input water to tank and tap water. The concentrations of nine evaluated heavy metals in all groups of water samples were found to be far below the specified standard levels in China. The concentrations of Fe, Mn, and Zn increased significantly from the input water samples to the tank and tap water samples in spring and summer (p < 0.05), especially for the water samples that had been stagnant for a long time. Negative correlations were found between most of the heavy metals and residual chlorine (Fe, Cu, Zn, and As, r = -0.186 to -0.519, p < 0.05). In particular, a high negative correlation was observed between Fe and residual chlorine (r = -0.489 to -0.519, p < 0.01) in spring and summer. Fe and Mn displayed positive correlations with turbidity (r = 0.672 and 0.328, respectively; p < 0.05). In addition, Cr and As were found to be positively associated with some nutrients (NO₃^-, TN, and SO₄^2-; r = 0.420-0.786, p < 0.01). The material of the storage tanks had little influence on the difference in heavy metal concentrations. Overall, this survey illustrated that SWSSs may pose a chronic threat to water quality and could provide useful information for practitioners.

A comprehensive investigation of the microbial risk of secondary water supply systems in residential neighborhoods in a large city

Secondary water supply systems (SWSSs) are characterized by long water stagnation and low levels of chlorine residuals, which may pose a high microbial risk to terminal users. In this study, the SWSSs of 12 residential neighborhoods in a metropolitan area of 5 million people in southeastern China were seasonally investigated to assess their microbial risks by determining more than 30 physicochemical and biological parameters. Although the microbiological quality of SWSS water met the requirements of the standards for drinking water quality of China, it did deteriorate in various aspects. The heterotrophic plate counts with R2A media were high (> 100 CFU/mL) in some SWSS tank and tap water samples. Propidium monoazide (PMA)-qPCR revealed a one magnitude higher abundance of viable bacteria in the tank and tap water samples (average 10^3.63±1.10 and 10^3.65±1.25 gene copies/mL, respectively) compared with the input water samples, and Enterococcus, Acanthamoeba, and Hartmannella vermiformis were only detected in the tanks. In particular, the high detection frequency of Legionella in 35% tank and 21% tap water samples suggested it is a supplementary microbial safety indicator in SWSSs. The microbial regrowth potential was more obvious in summer, and Illumina sequencing also demonstrated distinct seasonal changes in the relative abundance of bacterial gene sequences at the genus level. Turbidity and residual chlorine were closely connected with total bacterial biomass, and the latter seemed responsible for microbial community structure alteration. The extremely low chlorine residuals associated with a high abundance of total bacteria (as high as 10^6.48 gene copies/mL) and Legionella (as high as 10^6.71 gene copies/100 mL) in the closed valve tanks highlighted the high microbial risk increased by mishandling the operation of SWSSs. This study found that SWSSs possessed a higher microbial risk than the drinking water network, which suggested that the frequency and scope of monitoring the microbial risk of SWSSs in megacities should be strengthened for the purpose of waterborne epidemic disease prevention and control.

Draft Genome Sequences of Two Cadophora Strains Isolated from Water and a Nonalcoholic Beverage Ingredient

Members of the fungal genus Cadophora are isolated from a variety of habitats, including plants, soil, water, food, and indoor environments. Here, we report the draft genome sequences of two strains, Cadophora malorum M34 and Cadophora sp. strain M221.