Aspergillus Section Fumigati in Firefighter Headquarters

Assessment of Portuguese fitness centers: Bridging the knowledge gap on harmful microbial contamination with focus on fungi

The lack of knowledge regarding the extent of microbial contamination in Portuguese fitness centers (FC) puts attendees and athletes at risk for bioaerosol exposure. This study intends to characterize microbial contamination in Portuguese FC by passive sampling methods: electrostatic dust collectors (EDC) (N = 39), settled dust (N = 8), vacuum filters (N = 8), and used cleaning mops (N = 12). The obtained extracts were plated in selective culture media for fungi and bacteria. Filters, EDC, and mop samples' extracts were also screened for antifungal resistance and used for the molecular detection of the selected Aspergillus sections. The detection of mycotoxins was conducted using a high-performance liquid chromatograph (HPLC) system and to determine the cytotoxicity of microbial contaminants recovered by passive sampling, HepG2 (human liver carcinoma) and A549 (human alveolar epithelial) cells were employed. The results reinforce the use of passive sampling methods to identify the most critical areas and identify environmental factors that influence microbial contamination, namely having a swimming pool. The cardio fitness area presented the highest median value of total bacteria (TSA: 9.69 × 102 CFU m-2.day-1) and Gram-negative bacteria (VRBA: 1.23 CFU m-2.day-1), while for fungi it was the open space area, with 1.86 × 101 CFU m-2.day-1. Aspergillus sp. was present in EDC and in filters used to collect settled dust. Reduced azole susceptibility was observed in filters and EDC (on ICZ and VCZ), and in mops (on ICZ). Fumonisin B2 was the only mycotoxin detected and it was present in all sampling matrixes except settled dust. High and moderate cytotoxicity was obtained, suggesting that A549 cells were more sensitive to samples' contaminants. The observed widespread of critical toxigenic fungal species with clinical relevance, such as Aspergillus section Fumigati, as well as Fumonisin B2 emphasizes the importance of frequent and effective cleaning procedures while using shared mops appeared as a vehicle of cross-contamination.

One Health Approach to Tackle Microbial Contamination on Poultries-A Systematic Review

This study reports the search of available data published regarding microbial occupational exposure assessment in poultries, following the PRISMA methodology. Air collection through filtration was the most frequently used. The most commonly used passive sampling method was material collection such as dust, cages, soils, sediment, and wastewater. Regarding assays applied, the majority of studies comprised culture-based methods, but molecular tools were also frequently used. Screening for antimicrobial susceptibility was performed only for bacteria; cytotoxicity, virological and serological assays were also performed. Most of the selected studies focused on bacteria, although fungi, endotoxins, and β-glucans were also assessed. The only study concerning fungi and mycotoxins reported the carcinogenic mycotoxin AFB1. This study gives a comprehensive overview of microbial contamination in the poultry industry, emphasizing this setting as a potential reservoir of microbial pathogens threatening human, animal, and environmental health. Additionally, this research helps to provide a sampling and analysis protocol proposal to evaluate the microbiological contamination in these facilities. Few articles were found reporting fungal contamination in poultry farms worldwide. In addition, information concerning fungal resistance profile and mycotoxin contamination remain scarce. Overall, a One Health approach should be incorporated in exposure assessments and the knowledge gaps identified in this paper should be addressed in further research.

Microbial Contamination of Bedding Material: One Health in Poultry Production

In poultry farms, the mixture of bedding material, chicken excrement, and feathers seems to play an important role in pathogen development which may contribute to a potential risk of zoonosis, spreading the disease through the food chain. The purpose of this study was to analyze microbial contamination in bedding material and other matrices as well as potential antimicrobial resistances in chicken production facilities, and also to identify the sampling techniques and assays used. This study evidences the available data published, following the PRISMA methodology. Among the environmental samples, surface swabs were frequently used as a passive sampling technique. Morphological identification was performed in all studies. From all the matrices, the bedding material was the most contaminated. Most studies focused on bacterial contamination, with Salmonella sp. and Campylobacter sp. being commonly reported and three studies evidenced fungal contamination, being Penicillium sp.- and Aspergillus sp.-dominant. Mycotoxin assessment was only performed in one study, being identified in all bedding samples. The screening for bacteria resistance evidenced bacteria multidrug resistance; however, fungal susceptibility to azoles was not assessed in any of the analyzed studies. Briefly, this review evidences the microbial contamination in poultry facilities, emphasizing animals' bedding as a potential source of contamination. Additionally, this study contributes to a sampling and analysis protocol proposal to assess the microbial contamination in this setting. Additionally, the knowledge gaps identified highlight the need of further research regarding microbial contamination and toxicological potential on animals' bedding in order to mitigate the exposure in poultry pavilions.

Microbial Contamination in the Coffee Industry: An Occupational Menace besides a Food Safety Concern?

Respiratory abnormalities among workers at coffee roasting and packaging facilities have already been reported; however, little is known about microbiological contamination inside coffee production facilities. This study intends to assess the microbial contamination (fungi and bacteria) in two coffee industries from Brazil with a multi-approach protocol for sampling and for subsequent analyses using four main sources of samples: filtering respiratory protection devices (FRPD) used by workers, settled dust, electrostatic dust cloths (EDC) and coffee beans. The fungal contamination in the assessed industries was also characterized through the molecular detection of toxigenic species and antifungal resistance. Total bacteria contamination presented the highest values in FRPD collected from both industries (7.45 × 104 CFU·m^-2; 1.09 × 104 CFU·m^-2). Aspergillus genera was widespread in all the environmental samples collected and sections with clinical relevance (Fumigati) and with toxigenic potential (Nigri and Circumdati) were recovered from FRPD. Circumdati section was observed in 4 mg/mL itraconazole. Sections Circumdati (EDC, coffee beans and settled dust) and Nidulantes (EDC, coffee beans and FRPD) were detected by qPCR. Some of the targeted Aspergillus sections that have been identified microscopically were not detected by qPCR and vice-versa. Overall, this study revealed that microbial contamination is a potential occupational risk in the milling stage and should be tackled when assessing exposure and performing risk assessment. In addition, a multi-sampling campaign should be the approach to follow when assessing microbial contamination and FRPD should be included in this campaign. Occupational exposure to mycotoxins should be considered due to high fungal diversity and contamination. A One Health approach should address these issues in order to prevent consumption of coffee crops and beans infected by fungi and, more specifically, to avoid widespread azole resistance.

Unveiling the Occupational Exposure to Microbial Contamination in Conservation–Restoration Settings

Assuring a proper environment for the fulfillment of professional activities is one of the Sustainable Development Goals and is contemplated in the One Health approach assumed by the World Health Organization. This particular study is applied to an often neglected sector of our society—the conservators/restorers—despite the many health issues reported by these professionals. Three different specialties (textiles, paintings and wood sculpture) and locations were selected for evaluation by placement of electrostatic dust cloths. After treatment of the samples, bacterial and fungal contamination were assessed, as well as mycotoxin determination, the presence of azole-resistant strains and cytotoxicity of the microorganisms encountered. Bacteria were only present in one of medias used and showed relatively low numbers. The highest level of contamination by fungi was identified in one of the textiles settings. The textile area also showed the highest variability for fungi. Aspergillus sp. are one indicator of possible environmental issues, and A. sections Fumigati and Circumdati were particularly relevant in two of the settings and identified in all of them. No mycotoxins were detected and the large majority of the fungi identified were non-cytotoxic. Overall, these can be considered low-contaminated environments but attention should be given to the Aspergillus sp. contamination. Additional studies are needed not only to make these results more robust, but also to test if the environmental sampling alone is the best approach in a setting where there is very little movement and dust displacement and where professionals are in very close proximity to the artefacts being treated, which may suggest the existence of a micro-atmosphere worth evaluating and comparing to the obtained results.

Development of an Indexed Score to Identify the Most Suitable Sampling Method to Assess Occupational Exposure to Fungi

The sampling approach is of utmost importance to obtain data regarding microbial viability and truly assess workers’ potential health effects. The purpose of this assessment is to create a score which will provide up-to-date information to identify the most suitable sampling method to assess occupational exposure to fungi. Data from a sampling campaign performed at Firefighters Headquarters (FFH) was analysed and a score was calculated from one (1) to three (3) for five (5) distinct sample parameters: (a) accuracy; (b) complexity of the field work; (c) cost; (d) complexity in laboratory work; and (e) time taken since the fieldwork until obtaining the fungal contamination characterization. The statistical analysis allowed us to conclude that settled dust and Andersen six-stage were the best sampling methods to perform the assessment of the occupational exposure to fungi at FFH, when considering the number of species. As for the final score, the results showed that surface swabs were the best sampling method. The results obtained for surface swabs highlights the low complexity of this processing combined with the fact that it is a low-cost sampling method. This study reinforces the need to use a wide array of sampling methods when assessing occupational exposure to fungal contamination to ensure an accurate risk characterization.

Microbial contamination in waste collection: Unveiling this Portuguese occupational exposure scenario

Previous studies anticipated that microorganisms and their metabolites in waste will increase as a consequence of a decreased collection frequency and due to differences in what kind of waste is bagged before collection leading to an increased exposure of workers handling the waste. This study aim was to investigate the microbial contamination present in the waste collection trucks (WCT) and in the support facilities (waste collection station - WCS). It was applied a multi-approach protocol using active (air sampling by impingement and impaction) and passive (surface swabs, electrostatic dust cloths and settled dust) sampling methods. The screening of azole-resistance, the investigation of mycotoxins and the assessment of the elicited biological responses in vitro were also carried out aiming recognizing the possible health effects of waste collection drivers. SARS-CoV-2 detection was also performed. In WCS only air samples had contamination in all the four sampling sites (canteen, operational removal core, operational removal center, and administrative service). Among all the analyzed matrices from the WCT a higher percentage of total bacterial counts and Gram-was detected in swabs (66.93%; 99.36%). In WCS the most common species were Penicillium sp. (43.98%) and Cladosporium sp. (24.68%), while on WCT Aspergillus sp. (4.18%) was also one of the most found. In the azole resistance screening Aspergillus genera was not observed in the azole-supplemented media. SARS-CoV-2 was not detected in any of the environmental samples collected, but Aspergillus section Fumigati was detected in 5 samples. Mycotoxins were not detected in EDC from WCS, while in WCT they were detected in filters (N = 1) and in settled dust samples (N = 16). In conclusion, our study reveals that a comprehensive sampling approach using active and passive sampling (e.g. settled dust sampling for a representative mycotoxin evaluation) and combined analytic methods (i.e., culture-based and molecular) is an important asset in microbial exposure assessments. Concerning the waste collection exposure scenario, the results of this study unveiled a complex exposure, particularly to fungi and their metabolites. Aspergillus section Fumigati highlight the significance of targeting this section in the waste management industry as an indicator of occupational health risk.

Microbial contamination in waste collection: Unveiling this Portuguese occupational exposure scenario

Previous studies anticipated that microorganisms and their metabolites in waste will increase as a consequence of a decreased collection frequency and due to differences in what kind of waste is bagged before collection leading to an increased exposure of workers handling the waste. This study aim was to investigate the microbial contamination present in the waste collection trucks (WCT) and in the support facilities (waste collection station - WCS). It was applied a multi-approach protocol using active (air sampling by impingement and impaction) and passive (surface swabs, electrostatic dust cloths and settled dust) sampling methods. The screening of azole-resistance, the investigation of mycotoxins and the assessment of the elicited biological responses in vitro were also carried out aiming recognizing the possible health effects of waste collection drivers. SARS-CoV-2 detection was also performed. In WCS only air samples had contamination in all the four sampling sites (canteen, operational removal core, operational removal center, and administrative service). Among all the analyzed matrices from the WCT a higher percentage of total bacterial counts and Gram-was detected in swabs (66.93%; 99.36%). In WCS the most common species were Penicillium sp. (43.98%) and Cladosporium sp. (24.68%), while on WCT Aspergillus sp. (4.18%) was also one of the most found. In the azole resistance screening Aspergillus genera was not observed in the azole-supplemented media. SARS-CoV-2 was not detected in any of the environmental samples collected, but Aspergillus section Fumigati was detected in 5 samples. Mycotoxins were not detected in EDC from WCS, while in WCT they were detected in filters (N = 1) and in settled dust samples (N = 16). In conclusion, our study reveals that a comprehensive sampling approach using active and passive sampling (e.g. settled dust sampling for a representative mycotoxin evaluation) and combined analytic methods (i.e., culture-based and molecular) is an important asset in microbial exposure assessments. Concerning the waste collection exposure scenario, the results of this study unveiled a complex exposure, particularly to fungi and their metabolites. Aspergillus section Fumigati highlight the significance of targeting this section in the waste management industry as an indicator of occupational health risk.

Electrostatic Dust Cloth: A Useful Passive Sampling Method When Assessing Exposure to Fungi Demonstrated in Studies Developed in Portugal (2018–2021)

Electrostatic dust cloths (EDC) have been widely used for microbiologic contamination assessment in different indoor and occupational environments. This paper reviews sixteen studies performed in Portugal between 2018 and 2021 for evaluating the exposure to microbiological agents and focusing on fungi using EDC as a passive sampling method. The findings suggest that EDC can be applied as a screening method for particulate matter-exposure assessment and as a complementary method to characterize microbial exposures in occupational environments. Overall, EDC should be included, side by side with other sampling methods, in sampling campaigns focused on exposure assessments due to the advantages such as the straightforward extraction protocol favoring the employment of different assays, which allows us to assess exposure to a wide range of microbial agents, and presents higher accuracy regarding the fungal diversity.

Microbial Occupational Exposure Assessments in Sawmills—A Review

The composition of airborne microflora in sawmills may vary to a great degree depending on the kind of timber being processed and the technology of production being used. Cases of allergy alveolitis and asthma have been reported in woodworkers who were exposed to wood dust largely infected with microorganisms. The aim of this review article is to identify studies where the microbial occupational exposure assessment was performed in sawmills and the characteristics of the contamination found, as well as to identify which sampling methods and assays were applied. This study reports the search of available data published regarding microbial occupational exposure assessment in environmental samples from sawmills, following the Preferred Reporting Items for Systematic Reviews (PRISMA) methodology. The most used sampling method was air sampling, impaction being the most common method. Regarding analytical procedures for microbial characterization, morphological identification of fungi and bacteria was the most frequent approach. Screening for fungal susceptibility to azoles was performed in two studies and four studies applied molecular tools. Regarding microbial contamination, high fungal levels were frequent, as well as high bacteria levels. Fungal identification evidenced Penicillium as the most frequent genera followed by Aspergillus sp. Mycotoxins were not assessed in any of the analyzed studies. Microbial occupational exposure assessment in sawmills is crucial to allow this risk characterization and management.

Cytotoxicity of Aspergillus Section Fumigati Isolates Recovered from Protection Devices Used on Waste Sorting Industry

Safe working conditions must be guaranteed during waste sorting, which is crucial to maximizing recycling and reuse, in order to minimize workers’ exposure to chemical and biological hazards. This study determines the contribution of Aspergillus section Fumigati to the overall cytotoxicity of filtering respiratory protection devices (FRPD) and mechanic protection gloves (MPG) collected in 2019 from different workstations in one waste sorting industry in Portugal. The cytotoxicity of 133 Aspergillus section Fumigati isolates was determined as IC50 in human A549 epithelial lung cells and swine kidney cells, using the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. Aspergillus section Fumigati cytotoxicity results were compared with previous total cytotoxicity data from FRPD and MPG samples. A significant correlation was detected between the total cytotoxicity of samples and cytotoxicity of Aspergillus section Fumigati isolates in A549 cells (rS = −0.339, p = 0.030). The cytotoxicity of Aspergillus section Fumigati isolates explained 10.7% of the total cytotoxicity of the sample. On the basis of the comparison of cytotoxicity levels, it was possible to determine the contribution of Aspergillus section Fumigati isolates for the total cytotoxicity of protection devices used in the waste sorting industry. The results support in vitro toxicology as a relevant approach in risk assessments regarding cytotoxicity in passive sampling, and thus, useful in determining the contribution of relevant microbial contaminants to overall cytotoxicity. This approach can provide valuable answers in dose/response studies, and support innovations in risk characterization and their translation into occupational policies.