Surface Persistence of Trace Level Deposits of Highly Energetic Materials

A Mathematical Model for Sublimation of a Thin Film in Trace Explosive Detection Problem

Here, we introduce an advanced mathematical model for the sublimation of thin films of explosives. The model relies on the Hertz-Knudsen-Langmuir (HKL) equation that describes the vaporization rate of an explosive and controls the mass exchange between the surface and the ambient air. The latest experimental data on sublimation and diffusion of 2,4,6-trinitrotoluene (TNT) monocrystals were factored in, as well as the data on the sublimation rate of hexogen (RDX), octogen (HMX), and picramide (TNA) traces. To advance the mathematical model we suggested previously, we took into account the structure of a substrate on which a thin explosive layer was deposited. The measurement problem of the sublimation rate and limits of an explosive arises from developing and advancing remote detection methods for explosives traces. Using mathematical modelling, we can identify a detectable quantity of a specific explosive under given conditions. We calculated the mass of the explosive in the air upon sublimation of thin explosive films from the surfaces over a wide range of the parameters in question and made conclusions regarding the application limits of the devised standoff trace explosive detection techniques.

Empirical determination of explosive vapor transport efficiencies

The transport efficiency of 2,4-dinitrotoluene (2,4-DNT), 2,4,6-trinitrotoluene (TNT) and 1,3,5-trinitro-1,3,5-triazinane (RDX) trace vapors through tubing materials that commonly constitute vapor handling infrastructures have been determined for a variety of tubing dimensions and sampling conditions. Using a programmable temperature vaporization inlet coupled with a gas chromatography mass spectrometer (PTV-GC-MS), the explosive vapors were quantified both with and without a length of tubing of a specific material in the sampling flow path. At vapor temperatures of 30 °C and 66 °C, minimal attenuations were observed for 2,4-DNT and TNT vapor concentrations when the tubing material was in-line with the sampling flow path, indicating that the transport is largely unaffected by interactions with the surface of the tubing materials. In contrast, RDX vapors showed large attenuations as a function of both sampling conditions and tubing materials/dimensions. For those experiments where attenuated RDX vapor transport was observed, the mass sequestered by interactions between the flowing vapor and the internal tubing surface was determined to be in the range of tens to hundreds of picograms. Of all the materials examined for RDX transport, fluorinated ethylene propylene (FEP) tubing resulted in the least amount of mass loss to surface interactions, with vapor transport efficiencies (VTEs) between 95-100%. However, for some materials, the combination of tubing dimensions and sampling conditions resulted in no RDX transport, even after sampling more than 250.0 L of vapor through the tubing.