Effects of Sucrose Palmitate on the Physico-Chemical and Mucoadhesive Properties of Buccal Films

Flaxseed Mucilage/Hydroxypropyl Methylcellulose and Sodium Alginate/Polyvinyl Alcohol Composite Bilayer Film as a Promising Drug Carrier for Periodontal Treatment

Objectives

The present study focused on the formulation of mucoadhesive bilayer composite films for the treatment of periodontitis and evaluation of their physicochemical properties.

Materials and Methods

The solvent casting technique was used to prepare films. The primary layer (D) was prepared with flaxseed and hydroxypropyl methylcellulose composite to sustain the release of doxycycline hyclate. The second layer (S) comprised sodium alginate and polyvinyl alcohol composite for faster release of clove oil. Both layers were combined to generate the bilayer film (B). All formulations were characterized further to obtain an optimized formulation.

Results

Attenuated total reflection-Fourier transform infrared radiation results showed intactness of drug and clove oil in the presence of excipients. The pH of the films was compatible with the periodontal cavity and the thickness was suitable for inserting into the cavity. The immediate release layer showed faster disintegration and swelling. The content of clove oil was above 80%. The rate of swelling of the primary layer was slow and drug content complied with the United States Pharmacopoeia. Scanning electron microscope analysis revealed intact, non-porous and smooth films. Films exhibited better mechanical strength and bioadhesiveness. Clove oil was released from the immediate release layer within 10 min, and doxycycline hyclate release was retarded to a minimum of up to 8 h in the primary layer as well as the bilayer. Formulation also had a significant effect on both Escherichia coli and Staphylococcus aureus.

Conclusion

In the current study, bilayers were successfully prepared and characterized. The optimized formulation can be effectively used for the treatment of periodontitis.

Development and In Vitro Evaluation of Aceclofenac Buccal Film

AIM

This study aimed to formulate and characterize aceclofenac buccal film formulations made of different polymers and evaluate the effects of polymer type on buccal film properties.

MATERIALS AND METHODS

Five polymer types, namely hydroxypropyl methylcellulose (HPMC), sodium carboxymethylcellulose (SCMC), polyvinyl alcohol (PVA), Eudragit S100, and Eudragit SR100, were used to prepare aceclofenac buccal film formulation either separately or combined by solvent-casting method. These formulations were evaluated in terms of physical appearance, folding test, film weight and thickness, drug content, percentage of elongation, moisture uptake, water vapor permeability, and in vitro drug release.

RESULTS

The addition of Eudragit polymer in most of the produced buccal films was unacceptable with low folding endurance. However, the dissolution profile of buccal films made from PVA and Eudragit SR100 provided a controlled drug release profile.

CONCLUSION

Buccal films can be formulated using different polymers either individually or in combination to obtain the drug release profile required to achieve a desired treatment goal. Furthermore, the property of the buccal films depends on the type and concentration of the polymer used.

Formulation and characterization of pramipexole containing buccal films for using in Parkinson's disease

Parkinson's disease (PD) is neurodegenerative chronic illness which affects primarily the elderly over 45 years of age. The symptoms can be various, both non-motor and motor symptoms can appear. The biggest problem in the treatment of the disease is the difficulty in swallowing for the patients. However, buccal patches can solve this problem because the patients do not have to swallow the dosage form, and during application, the API can absorb from the area of the buccal mucosa quickly without causing a foreign body sensation. In our present study, we focused on the development of buccal polymer films with pramipexole dihydrochloride (PR). Films with different compositions were formulated and their mechanical properties and chemical interactions were investigated. The biocompatibility of the film compositions was examined on the TR146 buccal cell line. The permeation of PR was also monitored across the TR146 human cell line. It can be stated that the plasticizer can enhance the thickness and the breaking hardness of the films, while not decreasing their mucoadhesivity significantly. All formulations proved to have cell viability higher than 87%. Finally, we found the best composition (3% SA+1% GLY-PR-Sample1) which can be applied on the buccal mucosa in the treatment of PD.

Development and evaluation of bioadhesive buccal films based on sodium alginate for allergy therapy

Buccal drug administration is a less explored area, therefore researchers and companies focus on its research because of its innovative potential and opportunities. Buccal polymer films (patches) are considered to be an innovative form and have a great number of advantageous properties. Firstly, patients who suffer from swallowing problems and children can also apply them. The active pharmaceutical ingredient enters the systemic circulation directly without degradation and transformation. The aim of this study was to formulate buccal films with sodium alginate (SA) because it is a rarely used, innovative polymer for the formulation of buccal films. The mechanical, chemical properties and dosage forms of the prepared films were investigated with different methods. To formulate the films, cetirizine dihydrochloride (CTZ) was used as model drug, and glycerol (GLY) was added to make the films more elastic. The samples were prepared and stored at room temperature. As a result, it can be seen that the mechanical properties of all film compositions show good results, especially breaking hardness. The films with high SA concentration containing CTZ had appropriate mucoadhesion forces, so these samples are suitable for application on the buccal mucosa. The results of dissolution confirmed this finding. Finally, it can be said we formulated fast dissolving films and it can be concluded that the films prepared with 3% SA concentration containing 1% and 3% GLY can be recommended for buccal application.

Investigation of Surface Properties and Free Volumes of Chitosan-Based Buccal Mucoadhesive Drug Delivery Films Containing Ascorbic Acid

Nowadays, the buccal administration of mucoadhesive films is very promising. Our aim was to prepare ascorbic acid-containing chitosan films to study the properties and structures important for applicability and optimize the composition. During the formulation of mucoadhesive films, chitosan as the polymer basis of the film was used. Ascorbic acid, which provided the acidic pH, was used in different concentrations (2–5%). The films were formulated by the solvent casting method. The properties of films important for applicability were investigated, such as physical parameters, mucoadhesive force, surface free energy, and breaking strength. The fine structure of the films was analyzed by atomic force microscopy, and the free volume was analyzed by PALS, which can be important for drug release kinetics and the location of the drug in the film. The applicability of the optimized composition was also tested with two different types of active ingredients. The structure of the films was also analyzed by XRPD and FTIR. Ascorbic acid can be used well in chitosan films, where it can function as a permeation enhancer when reacting to chitosan, it is biodegradable, and can be applied in 2% of our studies.

An Updated Overview of the Emerging Role of Patch and Film-Based Buccal Delivery Systems

Buccal mucosal membrane offers an attractive drug-delivery route to enhance both systemic and local therapy. This review discusses the benefits and drawbacks of buccal drug delivery, anatomical and physiological aspects of oral mucosa, and various in vitro techniques frequently used for examining buccal drug-delivery systems. The role of mucoadhesive polymers, penetration enhancers, and enzyme inhibitors to circumvent the formulation challenges particularly due to salivary renovation cycle, masticatory effect, and limited absorption area are summarized. Biocompatible mucoadhesive films and patches are favored dosage forms for buccal administration because of flexibility, comfort, lightness, acceptability, capacity to withstand mechanical stress, and customized size. Preparation methods, scale-up process and manufacturing of buccal films are briefed. Ongoing and completed clinical trials of buccal film formulations designed for systemic delivery are tabulated. Polymeric or lipid nanocarriers incorporated in buccal film to resolve potential formulation and drug-delivery issues are reviewed. Vaccine-enabled buccal films have the potential ability to produce both antibodies mediated and cell mediated immunity. Advent of novel 3D printing technologies with built-in flexibility would allow multiple drug combinations as well as compartmentalization to separate incompatible drugs. Exploring new functional excipients with potential capacity for permeation enhancement of particularly large-molecular-weight hydrophilic drugs and unstable proteins, oligonucleotides are the need of the hour for rapid advancement in the exciting field of buccal drug delivery.

Formulation and Optimization of Sodium Alginate Polymer Film as a Buccal Mucoadhesive Drug Delivery System Containing Cetirizine Dihydrochloride

Currently, pharmaceutical companies are working on innovative methods, processes and products. Oral mucoadhesive systems, such as tablets, gels, and polymer films, are among these possible products. Oral mucoadhesive systems possess many advantages, including the possibility to be applied in swallowing problems. The present study focused on formulating buccal mucoadhesive polymer films and investigating the physical and physical–chemical properties of films. Sodium alginate (SA) and hydroxypropyl methylcellulose (HPMC) were used as film-forming agents, glycerol (GLY) was added as a plasticizer, and cetirizine dihydrochloride (CTZ) was used as an active pharmaceutical ingredient (API). The polymer films were prepared at room temperature with the solvent casting method by mixed two-level and three-level factorial designs. The thickness, tensile strength (hardness), mucoadhesivity, surface free energy (SFE), FTIR, and Raman spectra, as well as the dissolution of the prepared films, were investigated. The investigations showed that GLY can reduce the mucoadhesivity of films, and CTZ can increase the tensile strength of films. The distribution of CTZ proved to be homogeneous in the films. The API could dissolve completely from all the films. We can conclude that polymer films with 1% and 3% GLY concentrations are appropriate to be formulated for application on the buccal mucosa as a drug delivery system.