ZnO Nanoparticles of Rubia cordifolia Extract Formulation Developed and Optimized with QbD Application, Considering Ex Vivo Skin Permeation, Antimicrobial and Antioxidant Properties

Preparation of sodium alginate and xanthan gum bionanocomposite films reinforced with hybrid halloysite nanotubes containing ZnO and licorice root extract for wound dressing applications

This study aims to fabricate bio-nanocomposite films using a solution-casting method based on sodium alginate (SA)1 and xanthan gum (XG).2 These films are reinforced with hybrid Halloysite nanotubes (Hal)3 containing zinc oxide nanoparticles (ZnO-Hal) and licorice root extract (ZnO-Hal-LRE) in various concentrations. These films were characterized using FT-IR, XRD, and scanning electron microscopy (SEM). The ZnO-Hal-LRE nanohybrids significantly enhanced the films' mechanical properties, thermal stability, and water vapor permeability (WVP) barrier. The tensile strength (TS) increased from 6 MPa to 13.204 MPa, and the WVP improved from 1.82 × 10-9 g·m·m-2·h-1·Pa-1 to 1.25 × 10-9 g·m·m-2·h-1·Pa-1. Furthermore, incorporating LRE4 into the nanohybrids enhanced antibacterial and antioxidant activities and increased the cell viability of NIH-3T3 fibroblast cells. The in vitro release study of licorice extract from the nanocomposite film demonstrated a controlled and sustained release, prolonging the half-life of the licorice extract. These findings indicate that the prepared bio-nanocomposite films have significant potential for biomedical applications, particularly wound dressing.

In Vitro Antioxidant and Antifungal Activities of Extracts from Ocimum basilicum Leaves Validated by Molecular Docking and ADMET Analysis

The aim of study is to investigate the various mechanism-based antioxidant and anti-fungal properties of a hydroalcoholic extract of Ocimum basilicum L leaves. Additionally, conduct molecular docking to simultaneously validate in vitro activities. Also, perform ADMET analysis to know pharmacokinetic properties and its toxicity for its safety. Prior extract's qualitative analysis has been performed to identify the bioactive compounds by phytochemical tests and GC-MS analysis. Different mechanism-based in vitro antioxidant methods are studied; in different methods, different IC50 values have come, which revealed the extract's antioxidant potentials. The antifungal potential of the extract has been observed by performing a modified poison food assay and a time-killing curve assay. In silico analysis with the human peroxiredoxin 5 enzyme (PDB ID: 1HD2) and secreted aspartic proteinase (PDB ID: 2QZX), which predict extract biological activity, has shown promising results of Ocimum basilicum L extract. In silico findings confirm the in vitro experimental outcome of the extract. The different IC50 values of extracts in different mechanisms indicate their therapeutic potential, and that encourages further research in formulation development. The time-killing assay method gives information about a dynamic interaction between extract and microbial strain. Concentration-dependent antifungal studies have significance in formulation development for dose determination. This study concludes by highlighting the antioxidant and antifungal properties of sweet basil as potential therapeutic benefits with an in-silico approach.

Updated Review of Metal Nanoparticles Fabricated by Green Chemistry Using Natural Extracts: Biosynthesis, Mechanisms, and Applications

Metallic nanoparticles have found wide applications due to their unique physical and chemical properties. Green biosynthesis using plants, microbes, and plant/microbial extracts provides an environmentally friendly approach for nanoparticle synthesis. This review discusses the mechanisms and factors governing the biosynthesis of metallic nanoparticles such as silver, gold, and zinc using various plant extracts and microorganisms, including bacteria, fungi, and algae. The phytochemicals and biomolecules responsible for reducing metal ions and stabilizing nanoparticles are discussed. Key process parameters like pH, temperature, and precursor concentration affecting particle size are highlighted. Characterization techniques for confirming the formation and properties of nanoparticles are also mentioned. Applications of biosynthesized nanoparticles in areas such as antibacterial delivery, cancer therapy, biosensors, and environmental remediation are reviewed. Challenges in scaling up production and regulating nanoparticle properties are addressed. Power Point 365 was used for creating graphics. Overall, green biosynthesis is an emerging field with opportunities for developing eco-friendly nanomanufacturing platforms using abundant natural resources. Further work on optimizing conditions, standardizing protocols, and exploring new biosources is needed to realize the full potential of this approach.

Formulation of Phytosomes Containing Rubia cordifolia Extract for Neuropathic Pain: In Vitro and In Vivo Evaluation

This study aimed to develop a delivery system for the dried aqueous extract of Rubia cordifolia leaves (RCE) that could improve the neuroprotective potential of RCE by improving the bioavailability of the chief chemical constituent rubiadin. Rubiadin, an anthraquinone chemically, is a biomarker phytoconstituent of RCE. Rubiadin is reported to have strong antioxidant and neuroprotective activity but demonstrates poor bioavailability. In order to resolve the problem related to bioavailability, RCE and phospholipids were reacted in disparate ratios of 1:1, 1:2, and 1:3 to prepare phytosome formulations PC1, PC2, and PC3, respectively. The formulation PC2 showed particle size of 289.1 ± 0.21 nm, ζ potential of -6.92 ± 0.10 mV, entrapment efficiency of 72.12%, and in vitro release of rubiadin of 89.42% at pH 7.4 for a period up to 48 h. The oral bioavailability and neuroprotective potential of PC2 and RCE were assessed to evaluate the benefit of PC2 formulation over the crude extract RCE. Formulation PC2 showed a relative bioavailability of 134.14% with a higher neuroprotective potential and significantly (p < 0.05) augmented the nociceptive threshold against neuropathic pain induced by partial sciatic nerve ligation method. Antioxidant enzyme levels and histopathological studies of the sciatic nerves in various treatment groups significantly divulged that PC2 has enough potential to reverse the damaged nerves into a normal state. Finally, it was concluded that encapsulated RCE as a phytosome is a potential carrier system for enhancing the delivery of RCE for the efficient treatment of neuropathic pain.

Chitosan-Coated Solid Lipid Nanoparticles as an Efficient Avenue for Boosted Biological Activities of Aloe perryi: Antioxidant, Antibacterial, and Anticancer Potential

Aloe perryi (ALP) is an herb that has several biological activities such as antioxidant, antibacterial, and antitumor effects and is frequently used to treat a wide range of illnesses. The activity of many compounds is augmented by loading them in nanocarriers. In this study, ALP-loaded nanosystems were developed to improve their biological activity. Among different nanocarriers, solid lipid nanoparticles (ALP-SLNs), chitosan nanoparticles (ALP-CSNPs), and CS-coated SLNs (C-ALP-SLNs) were explored. The particle size, polydispersity index (PDI), zeta potential, encapsulation efficiency, and release profile were evaluated. Scanning electron microscopy was used to see the nanoparticles' morphology. Moreover, the possible biological properties of ALP were assessed and evaluated. ALP extract contained 187 mg GAE/g extract and 33 mg QE/g extract in terms of total phenolic and flavonoid content, respectively. The ALP-SLNs-F1 and ALP-SLNs-F2 showed particle sizes of 168.7 ± 3.1 and 138.4 ± 9.5 nm and the zeta potential values of -12.4 ± 0.6, and -15.8 ± 2.4 mV, respectively. However, C-ALP-SLNs-F1 and C-ALP-SLNs-F2 had particle sizes of 185.3 ± 5.5 and 173.6 ± 11.3 nm with zeta potential values of 11.3 ± 1.4 and 13.6 ± 1.1 mV, respectively. The particle size and zeta potential of ALP-CSNPs were 214.8 ± 6.6 nm and 27.8 ± 3.4 mV, respectively. All nanoparticles exhibited PDI < 0.3, indicating homogenous dispersions. The obtained formulations had EE% and DL% in the ranges of 65-82% and 2.8-5.2%, respectively. After 48 h, the in vitro ALP release rates from ALP-SLNs-F1, ALP-SLNs-F2, C-ALP-SLNs-F1, C-ALP-SLNs-F2, and ALP-CSNPs were 86%, 91%, 78%, 84%, and 74%, respectively. They were relatively stable with a minor particle size increase after one month of storage. C-ALP-SLNs-F2 exhibited the greatest antioxidant activity against DPPH radicals at 73.27%. C-ALP-SLNs-F2 demonstrated higher antibacterial activity based on MIC values of 25, 50, and 50 µg/mL for P. aeruginosa, S. aureus, and E. coli, respectively. In addition, C-ALP-SLNs-F2 showed potential anticancer activity against A549, LoVo, and MCF-7 cell lines with IC50 values of 11.42 ± 1.16, 16.97 ± 1.93, and 8.25 ± 0.44, respectively. The results indicate that C-ALP-SLNs-F2 may be promising nanocarriers for enhancing ALP-based medicines.

The Human Dermis as a Target of Nanoparticles for Treating Skin Conditions

Skin has a preventive role against any damage raised by harmful microorganisms and physical and chemical assaults from the external environment that could affect the body's internal organs. Dermis represents the main section of the skin, and its contribution to skin physiology is critical due to its diverse cellularity, vasculature, and release of molecular mediators involved in the extracellular matrix maintenance and modulation of the immune response. Skin structure and complexity limit the transport of substances, promoting the study of different types of nanoparticles that penetrate the skin layers under different mechanisms intended for skin illness treatments and dermo-cosmetic applications. In this work, we present a detailed morphological description of the dermis in terms of its structures and resident cells. Furthermore, we analyze the role of the dermis in regulating skin homeostasis and its alterations in pathophysiological conditions, highlighting its potential as a therapeutic target. Additionally, we describe the use of nanoparticles for skin illness treatments focused on dermis release and promote the use of metal-organic frameworks (MOFs) as an integrative strategy for skin treatments.

Box–Behnken Design Used to Optimize the Simultaneous Quantification of Amitriptyline and Propranolol in Tablet Dosages by RP-HPLC-DAD Method and Their Stability Tests

This study’s goal is to use a Box–Behnken design [BBD] methodology to create a new reverse-phase high-performance liquid chromatography diode-array detection [RP-HPLC-DAD] method for the simultaneous quantification of Amitriptyline and Propranolol in tablet dosages. The amitriptyline and propranolol standard drug peaks were obtained using a C-18 column with a dimension of 4.6 × 100 mm and a particle size packing of 2.5 µm at the retention time of 5.328 and 7.48 min, respectively. The mobile phase composition was a 75:25 mixture of methanol and 0.1 percent orthophosphoric acid, flowing at 1.0 mL/min at 26 °C. The peaks were identified at 257 nm after injecting 20 µL of the sample. An assay of the marketed tablets was performed, and the result was 101.33 and 99.4% for amitriptyline and propranolol, respectively, when compared to the standard calibration curve. Forced degradation investigations, such as acid, base, H2O2, and neutral condition, were performed. The results for both medications in term of % degradation were as follows: amitriptyline (16.07, 91.92, 26.98, and 0.64) and propranolol (15.84, 11.52, 9.09, and 3.62). According to the ICH criteria, the findings of the validation parameters were within an acceptable range. The new RP-HPLC-DAD method with BBD application is easy, accurate, and time-saving.

Central Composite Design (CCD) for the Optimisation of Ethosomal Gel Formulation of Punica granatum Extract: In Vitro and In Vivo Evaluations

This research manuscript's objective was to develop the Punica granatum extract ethosome gel. The use of nanotechnology can improve transdermal drug delivery permeation of its major bioactive compound β-sitosterol. The optimised and developed formulations were further studied in vitro and in vivo. The assessment of the anti-inflammatory activity of the gel was performed in Albino rats. Methanolic extract was prepared and developed into an ethosome suspension and an ethosome gel. To optimise the formulation's response in terms of particle size (nm) and entrapment efficiency (%), the central composite design (CCD) was used in 22 levels. The effects of factors such as lecithin (%) and ethanol (mL) in nine formulations were observed. Characterisation of ethosome gel was performed and the results showed the particle size (516.4 nm) and mean zeta potential (-45.4 mV). Evaluations of the gel formulation were performed. The results were good in terms of pH (7.1), viscosity (32,158 cps), spreadability (31.55 g cm/s), and no grittiness. In an in vitro study, the percentages of β-sitosterol release of ethosome gel (91.83%), suspension (82.74%), and extracts (68.15%) at 279 nm were recorded. The effects of the formulated gel on formalin-induced oedema in Albino rats showed good results in terms of anti-inflammatory activity. The comparative anti-inflammatory activity of Punica granatum extract and gel showed that the gel action was good for their topical application.

Simultaneous Estimation of Escitalopram and Clonazepam in Tablet Dosage Forms Using HPLC-DAD Method and Optimization of Chromatographic Conditions by Box-Behnken Design

The study aimed to develop a new reverse-phase high-performance liquid chromatography (RP-HPLC) method with diode array detection (DAD) detection for simultaneous estimation of escitalopram (EST) and clonazepam (CZP) in tablet dosage forms with a quality by design (QbD) approach. The chromatographic conditions were optimized by Box-Behnken design (BBD) and developed method was validated for the linearity, system suitability, accuracy, precision, robustness, sensitivity, and solution stability according to International Council for Harmonization (ICH) guidelines. EST and CZP standard drugs peaks were separated at retention times of 2.668 and 5.046 min by C-18 column with dimension of 4.6 × 100 mm length and particle size packing 2.5 µm. The mobile phase was methanol: 0.1% orthophosphoric acid (OPA) (25:75, v/v), with a flow rate of 0.7 mL/min at temperature of 26 °C. The sample volume injected was 20 µL and peaks were detected at 239 nm. Using the standard calibration curve, the % assay of marketed tablet was founded 98.89 and 98.76 for EST and CZP, respectively. The proposed RP-HPLC method was able to detect EST and CZP in the presence of their degradation products, indicating the stability-indicating property of the developed RP-HPLC method. The validation parameter's results in terms of linearity, system suitability, accuracy, precision, robustness, sensitivity, and solution stability were in an acceptable range as per the ICH guidelines. The newly developed RP-HPLC method with QbD application is simple, accurate, time-saving, and economic.

MgAl and ZnAl-Hydrotalcites as Materials for Cosmetic and Pharmaceutical Formulations: Study of Their Cytotoxicity on Different Cell Lines

The knowledge about the effect of hydrotalcites (HTlcs), largely used in pharmaceutics, on non-malignant cell lines is limited. The effect of MgAl-HTlc-and ZnAl-HTlc- (NO3−/Cl−/CO32−) on the cell viability of HaCat, fibroblasts and HepG2 was studied by MTT assay. Cells were incubated either with HTlc suspensions in the culture media and with the supernatant obtained from the suspension being centrifuged. MgAl-HTlcs suspensions resulted in being cytotoxic. As SEM and TEM analyses showed the presence of sub-micrometric particles in all the MgAl-HTlc examined, it could be hypothesized that this fraction can be internalized into cells reducing the viability. MgAl-HTlc-NO3 is the most cytotoxic probably due to the additional effect of NO3− anions. ZnAl-HTlcs are cytotoxic, especially for HaCat and HepG2 cells (viability <60% at all the concentrations assayed). The effect is attributable both to the sub-micrometric fraction (identified by TEM) and to the high Zn2+ levels found in the culture medium by ICP-OES analysis, suggesting that ZnAl-HTlcs are less stable than MgAl-HTlc in the used media. The obtained results suggest that it is very important to perform ad hoc studies in order to evaluate HTlc safety before to be introduced in a formulation.