Electrospun Polycaprolactone/Chitosan Nanofibers Containing Cordia myxa Fruit Extract as Potential Biocompatible Antibacterial Wound Dressings

Biocompatible Discopodium Ppenninervium loaded chitosan-PVA electrospun fibrous scaffold wound dressing

Biocompatible electrospun fibrous scaffolds that mimic the extracellular matrix (ECM) have significant potential in tissue engineering and wound healing applications. This study aimed to develop a novel scaffold by incorporating Discopodium penninervium (DP) leaf extract into chitosan-polyvinyl alcohol (CH-PVA) scaffolds via electrospinning and evaluate their biocompatibility, antibacterial properties, and efficacy in wound healing. Gas chromatography-mass spectrometry (GC-MS) analysis identified bioactive compounds in the DP extract, including phenolic acids, phytol, linolenic acid, and gamma-sitosterol, which are known for their anti-inflammatory, antioxidant, and skin-regenerative properties. The scaffolds exhibited a continuous, smooth, bead-free structure with fiber diameters ranging from 186 ± 24.1 nm to 236 ± 14.22 nm. Crosslinking (CL) with glutaraldehyde enhanced hydrophilicity, water absorbency, and biodegradability. Scaffolds with 2 % and 3 % DP extract demonstrated enhanced cell viability (up to 116.49 %) and improved antibacterial efficacy, with inhibition zones of 21 mm and 21.5 mm against E. coli and 21.2 mm and 21.8 mm against S. aureus, respectively, significantly outperforming the control group. In vivo studies showed accelerated wound closure (98 % within 15 days) compared to untreated controls (85 %). Enhanced angiogenesis, re-epithelialization, and collagen deposition promoted faster healing, while modulation of IL-6 and TNF-α inflammatory markers balanced inflammation and tissue regeneration. These findings demonstrate the potential of DP-loaded CH-PVA scaffolds as innovative, sustainable, and effective wound dressings. Their enhanced healing properties and antibacterial performance present a promising solution for improving healthcare outcomes, particularly in resource-limited settings where affordable and accessible treatments are critically needed.

Multifunctional polymeric nanofibrous scaffolds enriched with azilsartan medoxomil for enhanced wound healing

A prolonged and compromised wound healing process poses a significant clinical challenge, necessitating innovative solutions. This research investigates the potential application of nanotechnology-based formulations, specifically nanofiber (NF) scaffolds, in addressing this issue. The study focuses on the development and characterization of multifunctional nanofibrous scaffolds (AZL-CS/PVA-NF) composed of azilsartan medoxomil (AZL) enriched chitosan/polyvinyl alcohol (CS/PVA) through electrospinning. The scaffolds underwent comprehensive characterization both in vitro and in vivo. The mean diameter and tensile strength of AZL-CS/PVA-NF were determined to be 240.42 ± 3.55 nm and 18.05 ± 1.18 MPa, respectively. A notable drug release rate of 93.86 ± 2.04%, was observed from AZL-CS/PVA-NF over 48 h at pH 7.4. Moreover, AZL-CS/PVA-NF exhibited potent antimicrobial efficacy for Staphylococcus aureus and Pseudomonas aeruginosa. The expression levels of Akt and CD31 were significantly elevated, while Stat3 showed a decrease, indicating a heightened tissue regeneration rate with AZL-CS/PVA-NF compared to other treatment groups. In vivo ELISA findings revealed reduced inflammatory markers (IL-6, IL-1β, TNF-α) within treated skin tissue, implying a beneficial effect on injury repair. The comprehensive findings of the present endeavour underscore the superior wound healing activity of the developed AZL-CS/PVA-NF scaffolds in a Wistar rat full-thickness excision wound model. This indicates their potential as novel carriers for drugs and dressings in the field of wound care.

Isobavachalcone-loaded electrospun polycaprolactone/gelatin nanofibers for antibacterial and antioxidant applications

Antibacterial nanofibers have been widely used in the fields of biomedicine and food packaging fields. To overcome existing antibiotic resistance, this study utilized isobavachalcone (IBC), a natural compound with antibacterial and antioxidant properties, combined with polycaprolactone (PCL) and gelatin (GEL) to develop an electrospun nanofibrous antibacterial membrane. Scanning electron microscopy (SEM) analysis revealed a uniform and smooth surface structure of the nanofiber. Fourier transform infrared spectroscopy and x-ray diffraction confirmed the interactions among the components of the nanofibrous membrane PCL/GEL/IBC (PGI). Thermogravimetric analysis and contact angle measurements demonstrated the thermal stability and hydrophilic nature. Additionally, the mechanical properties of PGI membrane were that the elongation at break increased to 19.9% and the tensile strength to 2.9 MPa.In vitrorelease studies indicated at least 48% release rate of IBC from the PGI nanofibrous membrane in 12 h, and release period up to 14 d. Antioxidant results revealed PGI membranes had fine abilities for scavenging free radical. The elimination of over 99% ofStaphylococcus aureusand elimination of 54%Candida albicansdemonstrated the antibacterial capacities of the PGI membrane, indicating its potential as antibacterial and antioxidant materials. Subsequent faster wound healing, lower oxidative damage for 4-HNE and 8-OHdG, further demonstrated that PGI can reduce oxidative damage at the wound and promote wound healing. These findings also suggest the potential of PGI in the field of tissue engineering.

Potential of Chitosan/Gelatin-Based Nanofibers in Delivering Drugs for the Management of Varied Complications: A Review

Drug delivery systems have revolutionized traditional drug administration methods by addressing various challenges, such as enhancing drug solubility, prolonging effectiveness, minimizing adverse effects, and preserving potency. Nanotechnology-based drug delivery systems, particularly nanoparticles (NPs) and nanofibers (NFs), have emerged as promising solutions for biomedicine delivery. NFs, with their ability to mimic the porous and fibrous structures of biological tissues, have garnered significant interest in drug-delivering applications. Biopolymers such as gelatin (Ge) and chitosan (CH) have gained much more attention due to their biocompatibility, biodegradability, and versatility in biomedical applications. CH exhibits exceptional biocompatibility, anti-bacterial activity, and wound healing capabilities, whereas Ge provides good biocompatibility and cell adhesion properties. Ge/CH-based NFs stimulate cellular connections and facilitate tissue regeneration owing to their structural resemblance to the extracellular matrix. This review explores the additive methods of preparation, including electrospinning, force pinning, and template synthesis, focusing on electrospinning and the factors influencing the fiber structure. The properties of Ge and CH, their role in drug release, formulation strategies, and characterization techniques for electrospun fibers are discussed. Furthermore, this review addresses applications in delivering active moieties in the management of orthopedics and wound healing with regulatory considerations, along with challenges related to them. Thus, the review aims to provide a comprehensive overview of the potential of Ge/CH-based NFs for drug delivery and biomedical applications.

Fabrication of highly flexible biopolymeric chitosan/agarose based bioscaffold with Matricaria recutita herbal extract for antimicrobial wound dressing applications

A flexible biopolymer-based antimicrobial wound dressing has the potential to alleviate the burden of bacterial infections in wounds by enhancing antimicrobial effectiveness and promoting faster wound healing. This study focuses on the development of a highly flexible chitosan-agarose (CS-AG) bioscaffold, incorporating Matricaria recutita chamomile flower extract (CH) through a conventional casting method. The flexible CS-AG bioscaffold's physiochemical properties were confirmed by FTIR, indicating secondary interactions, and XRD, showing its crystalline structure. The addition of CH to the optimized CS-AG bioscaffold resulted in significant tensile strength (17.28 ± 0.33 MPa), distinctive structural morphology (SEM), surface roughness (AFM), contact angle, improved thermal properties (DSC), and enhanced thermal stability (TGA). Furthermore, the CH-infused bioscaffold significantly increased swelling capacity (~81.09 ± 1.74 % over 48 h), and degradation profile (~52 % over 180 h). The release studies of CS-AG-CH bioscaffold demonstrate controlled release of CH with in the bioscaffold at different pH conditions. The bioscaffold demonstrated effective antibacterial activity against S. aureus and E. coli strains. Additionally, cytotoxicity assays indicated that the bioscaffold supports better cell viability and proliferation in fibroblast (NIH 3T3) cell lines. Consequently, this antimicrobial bioscaffold shows promise as a drug release system and biocompatible wound dressing suitable for tissue engineering applications.

Rhamnus prinoides leaf extract loaded polycaprolactone-cellulose acetate nanofibrous scaffold as potential wound dressing: An in vitro study

Rhamnus prinoides leaf contains carbohydrates, saccharides, phenolic acids, and diterpenes with antibacterial, wound-healing, and anti-inflammatory properties. In this study, Rhamnus prinoides leaf extract was successfully incorporated into polycaprolactone-cellulose acetate (PCL-CA) nanofibers through electrospinning technique for the first time. The mats' morphology, diameter, chemical, and crystalline structure were characterized. The study investigated the mats' antibacterial activity, wound healing, cytotoxicity, drug release behaviour, hydrophilicity, and water absorbency properties. The results revealed that the mats exhibited continuous, smooth, without-beads, and interconnected structures, with average fiber diameters ranging from 385 ± 21 nm to 332 ± 74 nm. The antibacterial effeciency was remarkable against S. aureus and E. coli, achieving bacterial reduction percentages exceeding 99 % at concentrations of 3 % and above against S. aureus and 5 % and above against E. coli. Cytotoxic tests showed low-cytotoxicity up to an extract concentration of 7 %. The extract release increases with an increase in concentration. In vitro wound healing assay, the mats enhanced cell migration to the wound area. Additionally, the incorporation of Rhamnus prinoides significantly improved the hydrophilicity and water absorbency of the nanofibers. Overall, the study highlights the mats' broad antimicrobial and wound healing properties with less cytotoxicity, hydrophilicity, and water absorbency, making them promising for use as wound dressings.

Bioactive nanofibrous mats constructs: Separate efficacy of Lawsonia inermis and Scrophularia striata extracts in PVA/alginate matrices for enhanced wound healing

The study explores the use of electrospinning technology to create advanced wound dressing materials by integrating natural extracts from Lawsonia inermis (LI) and Scrophularia striata (SS) into nanofibrous matrices composed of Polyvinyl Alcohol (PVA) and Alginate (ALG). These macromolecular complexes aim to leverage the unique properties of the botanical extracts for wound healing purposes. The research assesses the physical, chemical, and mechanical attributes of the nanofibrous constructs as well as their antimicrobial activities and ability to promote wound repair. Evaluation of Cellular Viability and Cytotoxicity (MTT) tests showed high biocompatibility of the nanofibrous mats, with cell viability percentages of 92 % for LI-loaded mats and 89 % for SS-loaded mats. The antibacterial rate of extract-containing mats was 70 % higher than non-extract-containing mats. In vivo assessments on rat models with burn injuries demonstrated that mats containing LI and SS extracts substantially accelerate tissue regeneration and overall healing. Nanofibrous mats containing LI extract showed a 45 % faster wound healing process than the control, while those containing SS extract showed a 40 % improvement. Overall, the study highlights the potential of PVA/ALG nanofibrous mats augmented with LI and SS extracts as effective platforms for wound management, offering enhanced properties for superior healing outcomes.

Multifunctional Janus Membrane for Diabetic Wound Healing and Intelligent Monitoring

The complex microenvironment of diabetic wounds often hinders the healing process, ultimately leading to the formation of diabetic foot ulcers and even death. Dual monitoring and treatment of wounds can significantly reduce the incidence of such cases. Herein, a multifunctional Janus membrane (3D chitosan sponge-ZE/polycaprolactone nanofibers-ZP) was developed by incorporating the zinc metal-organic framework, europium metal-organic framework, and phenol red into nanofibers for diabetic wound monitoring and treatment. The directional water transport capacity of the resulting Janus membrane allows for unidirectional and irreversible drainage of wound exudate, and the multifunctional Janus membrane creates up to a 99% antibacterial environment, both of which can treat wounds. Moreover, the pH (5-8) and H2O2 (0.00-0.80 μM) levels of the wound can be monitored using the color-changing property of phenol red and the fluorescence characteristic of Eu-MOF on the obtained membrane, respectively. The healing stages of the wound can also be monitored by analyzing the RGB values of the targeted membrane images. This design can more accurately reflect the wound state and treat the wound to reduce bacterial infection and accelerate wound healing, which has been demonstrated in in vivo experiments. The results provide an important basis for early intervention in diabetic patients.

Antimicrobial Composites Based on Methacrylic Acid-Methyl Methacrylate Electrospun Fibers Stabilized with Copper(II)

This study presents fibers based on methacrylic acid-methyl methacrylate (Eudragit L100) as Cu(II) adsorbents, resulting in antimicrobial complexes. Eudragit L100, an anionic copolymer synthesized by radical polymerization, was electrospun in dimethylformamide (DMF) and ethanol (EtOH). The electrospinning process was optimized through a 22-factorial design, with independent variables (copolymer concentration and EtOH/DMF volume ratio) and three repetitions at the central point. The smallest average fiber diameter (259 ± 53 nm) was obtained at 14% w/v Eudragit L100 and 80/20 EtOH/DMF volume ratio. The fibers were characterized using scanning electron microscopy (SEM), infrared spectroscopy in attenuated total reflectance mode (FTIR-ATR), and differential scanning calorimetry (DSC). The pseudo-second-order mechanism explained the kinetic adsorption toward Cu(II). The fibers exhibited a maximum adsorption capacity (qe) of 43.70 mg/g. The DSC analysis confirmed the Cu(II) absorption, indicating complexation between metallic ions and copolymer networks. The complexed fibers showed a lower degree of swelling than the non-complexed fibers. The complexed fibers exhibited bacteriostatic activity against Gram-negative (Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) bacteria. This study successfully optimized the electrospinning process to produce thin fibers based on Eudragit L100 for potential applications as adsorbents for Cu(II) ions in aqueous media and for controlling bacterial growth.

Chitosan alchemy: transforming tissue engineering and wound healing

Chitosan, a biopolymer acquired from chitin, has emerged as a versatile and favorable material in the domain of tissue engineering and wound healing. Its biocompatibility, biodegradability, and antimicrobial characteristics make it a suitable candidate for these applications. In tissue engineering, chitosan-based formulations have garnered substantial attention as they have the ability to mimic the extracellular matrix, furnishing an optimal microenvironment for cell adhesion, proliferation, and differentiation. In the realm of wound healing, chitosan-based dressings have revealed exceptional characteristics. They maintain a moist wound environment, expedite wound closure, and prevent infections. These formulations provide controlled release mechanisms, assuring sustained delivery of bioactive molecules to the wound area. Chitosan's immunomodulatory properties have also been investigated to govern the inflammatory reaction during wound healing, fostering a balanced healing procedure. In summary, recent progress in chitosan-based formulations portrays a substantial stride in tissue engineering and wound healing. These innovative approaches hold great promise for enhancing patient outcomes, diminishing healing times, and minimizing complications in clinical settings. Continued research and development in this field are anticipated to lead to even more sophisticated chitosan-based formulations for tissue repair and wound management. The integration of chitosan with emergent technologies emphasizes its potential as a cornerstone in the future of regenerative medicine and wound care. Initially, this review provides an outline of sources and unique properties of chitosan, followed by recent signs of progress in chitosan-based formulations for tissue engineering and wound healing, underscoring their potential and innovative strategies.

Advances in chitosan and chitosan derivatives for biomedical applications in tissue engineering: An updated review

In recent years, chitosan (CS) has received much attention as a functional biopolymer for various applications, especially in the biomedical field. It is a natural polysaccharide created by the chemical deacetylation of chitin (CT) that is nontoxic, biocompatible, and biodegradable. This natural polymer is difficult to process; however, chemical modification of the CS backbone allows improved use of functional derivatives. CS and its derivatives are used to prepare hydrogels, membranes, scaffolds, fibers, foams, and sponges, primarily for regenerative medicine. Tissue engineering (TE), currently one of the fastest-growing fields in the life sciences, primarily aims to restore or replace lost or damaged organs and tissues using supports that, combined with cells and biomolecules, generate new tissue. In this sense, the growing interest in the application of biomaterials based on CS and some of its derivatives is justifiable. This review aims to summarize the most important recent advances in developing biomaterials based on CS and its derivatives and to study their synthesis, characterization, and applications in the biomedical field, especially in the TE area.

A novel designed nanofibrous mat based on hydroxypropyl methyl cellulose incorporating mango peel extract for potential use in wound care system

Skin tissue is damaged by factors such as burns, physical injuries and diseases namely diabetes. Infection and non-healing of burn wounds and lack of angiogenesis in diabetic wounds lead to extensive injuries and death. Therefore, the design of wound dressings with antibacterial and restorative capabilities is very important. In this study, nanofibers (NFs) including polyurethane (PU) and hydroxypropyl methyl cellulose (HPMC) were prepared with different ratios and Mango peel extract (MPE) loaded into NFs by electrospinning method. The morphology, chemical structure, porosity, degradation, water vapor permeability, mechanical properties, wettability, antioxidant activity and some cell studies and evaluation of their antibacterial properties were investigated. The optimal mat (PU90/HPMC10) had a defect-free morphology with homogeneous NFs. Furthermore, it showed improved biodegradability, water vapor permeability and porosity compared to other Mats. All NFs were non-toxic with hydrophilic behavior in the cellular environment and had acceptable hemocompatibility. The PU90/HPMC10/20 % optimal scaffold had significantly higher cell viability and proliferation than other samples and also had a higher antibacterial ability against pathogenic bacteria S. aureus (17 mm) and E. coli (11 mm). All these findings confirm that the produced NF mats, especially those loaded with MPE, have a high potential to be used as an effective wound dressing.

Nanofibers based on zein protein loaded with tungsten oxide for cancer therapy: fabrication, characterization and in vitro evaluation

Plant proteins have become attractive for biomedical applications such as wound dressing and drug delivery. In this research, nanofibers from pristine zein (plant protein) and zein loaded with tungsten oxide (WO3) were prepared (WO3@zein) using less toxic solvents (ethanol and acetic acid). Morphological and biological properties of the zein nanofiber were determined. Prepared nanofibers were defined by thermogravimetric analysis (TGA), X-ray diffraction (X-RD), Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscopy. The average fiber diameter was unchanged with an increase in WO3 concentration from 0.001 to 0.008%. FT-IR spectroscopy and X-RD indicated the presence of WO3 in WO3@zein nanofibers. In comparison to WO3-free, WO3@zein nanofibers showed higher safety and preserved the anticancer effect of WO3 against human melanoma cell line (A375) melanoma cells compared to WO3-free. Moreover, both WO3-free and WO3@zein caused a fourfold increase in the cellular proliferation of reactive oxygen species (ROS) in the treated A375 cells compared to untreated cells. ROS elevation led to apoptosis-dependent cell death of A375 cells as evidenced by up-regulating the expression of p53-downstream genes (p21 and Bax) (tumor-suppressor gene) while down-regulating the expression of key oncogenes (BCL2 and cyclin D). In conclusion, the prepared nanofiber represents a promising and safe candidate for anticancer applications.

Nanocomposite fibers based on cellulose acetate loaded with fullerene for cancer therapy: preparation, characterization and in-vitro evaluation

The current prevalence of cancerous diseases necessitates the exploration of materials that can effectively treat these conditions while minimizing the occurrence of adverse side effects. This study aims to identify materials with the potential to inhibit the metastasis of cancerous diseases within the human body while concurrently serving as therapeutic agents for their treatment. A novel approach was employed to enhance the anti-cancer properties of electrospun cellulose fibers by incorporating fullerene nanoparticles (NPs) into cellulose acetate (CA) fibers, resulting in a composite material called Fullerene@CA. This development aimed at utilizing the anti-cancer properties of fullerenes for potential therapeutic applications. This process has been demonstrated in vitro against various types of cancer, and it was found that Fullerene@CA nanocomposite fibers displayed robust anticancer activity. Cancer cells (Caco-2, MDA-MB 231, and HepG-2 cells) were inhibited by 0.3 and 0.5 mg.g-1 fullerene doses by 58.62-62.87%, 47.86-56.43%, and 48.60-57.73%, respectively. The tested cancer cells shrink and lose their spindle shape due to morphological changes. The investigation of the prepared nanocomposite reveals its impact on various genes, such as BCL2, NF-KB, p53, Bax, and p21, highlighting the therapeutic compounds' effectiveness. The experimental results demonstrated that the incorporation of NPs into CA fibers resulted in a significant improvement in their anti-cancer efficacy. Therefore, it is suggested that these modified fibers could be utilized as a novel therapeutic approach for the treatment and prevention of cancer metastasis.

Chemical, Pharmacological, and Theoretical Aspects of Some Transition Metal(II) Complexes Derived from Pyrrole Azine Schiff Base

Some new transition metal complexes were prepared by reacting metal(II) salts with Schiff base azines, which were prepared via condensation of 5-(diethylamino) salicylaldehyde and hydrazine with pyrrole-2-carbaldehyde. Their structures were confirmed based on CHN, UV-visible, FT-IR, and EPR measurements. The complexes were also assessed for their antibacterial, antioxidant, and anticancer properties. Some of these chemicals were said to be extraordinarily effective in this respect. The antibacterial activities of the complexes in vitro demonstrated their potential, although the [Cu(L)(bpy] complex was suggested to exhibit moderate activity against pathogens compared to all other in this series. The cytotoxic activity of the prepared analogues showed better cell viability compared with standard cisplatin. Moreover, there is a good agreement between the experimental and theoretical findings from docking and theoretical investigations done using DFT at the B3LYP level.

Polyacrylate-Cholesterol Amphiphilic Derivative: Formulation Development and Scale-up for Health Care Applications

The novel amphiphilic polyacrylate grafted with cholesterol moieties, PAAbCH, previously synthesized, was deeply characterized and investigated in the lab and on a pre-industrial scale. Solid-state NMR analysis confirmed the polymer structure, and several water-based pharmaceutical and cosmetic products were developed. In particular, stable oil/water emulsions with vegetable oils, squalene, and ceramides were prepared, as well as hydrophilic medicated films loaded with diclofenac, providing a prolonged drug release. PAAbCH also formed polyelectrolyte hydrogel complexes with chitosan, both at the macro- and nano-scale. The results demonstrate that this polymer has promising potential as an innovative excipient, acting as a solubility enhancer, viscosity enhancer, and emulsifying agent with an easy scale-up transfer process.

Evaluation of Biomedical Applications for Linseed Extract: Antimicrobial, Antioxidant, Anti-Diabetic, and Anti-Inflammatory Activities In Vitro

BACKGROUND

In the last few decades, the development of multidrug-resistant (MDR) microbes has accelerated alarmingly and resulted in significant health issues. Morbidity and mortality have increased along with the prevalence of infections caused by MDR bacteria, making the need to solve these problems an urgent and unmet challenge. Therefore, the current investigation aimed to evaluate the activity of linseed extract against Methicillin-resistant Staphylococcus aureus (MRSA) as an isolate from diabetic foot infection. In addition, antioxidant and anti-inflammatory biological activities of linseed extract were evaluated.

RESULT

HPLC analysis indicated the presence of 1932.20 µg/mL, 284.31 µg/mL, 155.10 µg/mL, and 120.86 µg/mL of chlorogenic acid, methyl gallate, gallic acid, and ellagic acid, respectively, in the linseed extract. Rutin, caffeic acid, coumaric acid, and vanillin were also detected in the extract of linseed. Linseed extract inhibited MRSA (35.67 mm inhibition zone) compared to the inhibition zone (29.33 mm) caused by ciprofloxacin. Standards of chlorogenic acid, ellagic acid, methyl gallate, rutin, gallic acid, caffeic acid, catechin, and coumaric acid compounds reflected different inhibition zones against MRSA when tested individually, but less than the inhibitory action of crude extract. A lower MIC value, of 15.41 µg/mL, was observed using linseed extract than the MIC 31.17 µg/mL of the ciprofloxacin. The MBC/MIC index indicated the bactericidal properties of linseed extract. The inhibition % of MRSA biofilm was 83.98, 90.80, and 95.58%, using 25%, 50%, and 75%, respectively, of the MBC of linseed extract. A promising antioxidant activity of linseed extract was recorded, with an IC₅₀ value of 20.8 µg/mL. Anti-diabetic activity of linseed extract, expressed by glucosidase inhibition, showed an IC₅₀ of 177.75 µg/mL. Anti-hemolysis activity of linseed extract was documented at 90.1, 91.5, and 93.7% at 600, 800, and 1000 µg/mL, respectively. Anti-hemolysis activity of the chemical drug indomethacin, on the other hand, was measured at 94.6, 96.2, and 98.6% at 600, 800, and 1000 µg/mL, respectively. The interaction of the main detected compound in linseed extract (chlorogenic acid) with the crystal structure of the 4G6D protein of S. aureus was investigated via the molecular docking (MD) mode to determine the greatest binding approach that interacted most energetically with the binding locations. MD showed that chlorogenic acid was an appropriate inhibitor for S. aureus via inhibition of its 4HI0 protein. The MD interaction resulted in a low energy score (-6.26841 Kcal/mol) with specified residues (PRO 38, LEU 3, LYS 195, and LYS 2), indicating its essential role in the repression of S. aureus growth.

CONCLUSION

Altogether, these findings clearly revealed the great potential of the in vitro biological activity of linseed extract as a safe source for combatting multidrug-resistant S. aureus. In addition, linseed extract provides health-promoting antioxidant, anti-diabetic, and anti-inflammatory phytoconstituents. Clinical reports are required to authenticate the role of linseed extract in the treatment of a variety of ailments and prevent the development of complications associated with diabetes mellitus, particularly type 2.

Therapeutic Agent-Loaded Fibrous Scaffolds for Biomedical Applications

Tissue engineering is a sophisticated field that involves the integration of various disciplines, such as clinical medicine, material science, and life science, to repair or regenerate damaged tissues and organs. To achieve the successful regeneration of damaged or diseased tissues, it is necessary to fabricate biomimetic scaffolds that provide structural support to the surrounding cells and tissues. Fibrous scaffolds loaded with therapeutic agents have shown considerable potential in tissue engineering. In this comprehensive review, we examine various methods for fabricating bioactive molecule-loaded fibrous scaffolds, including preparation methods for fibrous scaffolds and drug-loading techniques. Additionally, we delved into the recent biomedical applications of these scaffolds, such as tissue regeneration, inhibition of tumor recurrence, and immunomodulation. The aim of this review is to discuss the latest research trends in fibrous scaffold manufacturing methods, materials, drug-loading methods with parameter information, and therapeutic applications with the goal of contributing to the development of new technologies or improvements to existing ones.

Bismuth-Decorated Honeycomb-like Carbon Nanofibers: An Active Electrocatalyst for the Construction of a Sensitive Nitrite Sensor

The existence of carcinogenic nitrites in food and the natural environment has attracted much attention. Therefore, it is still urgent and necessary to develop nitrite sensors with higher sensitivity and selectivity and expand their applications in daily life to protect human health and environmental safety. Herein, one-dimensional honeycomb-like carbon nanofibers (HCNFs) were synthesized with electrospun technology, and their specific structure enabled controlled growth and highly dispersed bismuth nanoparticles (Bi NPs) on their surface, which endowed the obtained Bi/HCNFs with excellent electrocatalytic activity towards nitrite oxidation. By modifying Bi/HCNFs on the screen-printed electrode, the constructed Bi/HCNFs electrode (Bi/HCNFs-SPE) can be used for nitrite detection in one drop of solution, and exhibits higher sensitivity (1269.9 μA mM^-1 cm^-2) in a wide range of 0.1~800 μM with a lower detection limit (19 nM). Impressively, the Bi/HCNFs-SPE has been successfully used for nitrite detection in food and environment samples, and the satisfactory properties and recovery indicate its feasibility for further practical applications.

Chitosan-Coated Solid Lipid Nanoparticles as an Efficient Avenue for Boosted Biological Activities of Aloe perryi: Antioxidant, Antibacterial, and Anticancer Potential

Aloe perryi (ALP) is an herb that has several biological activities such as antioxidant, antibacterial, and antitumor effects and is frequently used to treat a wide range of illnesses. The activity of many compounds is augmented by loading them in nanocarriers. In this study, ALP-loaded nanosystems were developed to improve their biological activity. Among different nanocarriers, solid lipid nanoparticles (ALP-SLNs), chitosan nanoparticles (ALP-CSNPs), and CS-coated SLNs (C-ALP-SLNs) were explored. The particle size, polydispersity index (PDI), zeta potential, encapsulation efficiency, and release profile were evaluated. Scanning electron microscopy was used to see the nanoparticles' morphology. Moreover, the possible biological properties of ALP were assessed and evaluated. ALP extract contained 187 mg GAE/g extract and 33 mg QE/g extract in terms of total phenolic and flavonoid content, respectively. The ALP-SLNs-F1 and ALP-SLNs-F2 showed particle sizes of 168.7 ± 3.1 and 138.4 ± 9.5 nm and the zeta potential values of -12.4 ± 0.6, and -15.8 ± 2.4 mV, respectively. However, C-ALP-SLNs-F1 and C-ALP-SLNs-F2 had particle sizes of 185.3 ± 5.5 and 173.6 ± 11.3 nm with zeta potential values of 11.3 ± 1.4 and 13.6 ± 1.1 mV, respectively. The particle size and zeta potential of ALP-CSNPs were 214.8 ± 6.6 nm and 27.8 ± 3.4 mV, respectively. All nanoparticles exhibited PDI < 0.3, indicating homogenous dispersions. The obtained formulations had EE% and DL% in the ranges of 65-82% and 2.8-5.2%, respectively. After 48 h, the in vitro ALP release rates from ALP-SLNs-F1, ALP-SLNs-F2, C-ALP-SLNs-F1, C-ALP-SLNs-F2, and ALP-CSNPs were 86%, 91%, 78%, 84%, and 74%, respectively. They were relatively stable with a minor particle size increase after one month of storage. C-ALP-SLNs-F2 exhibited the greatest antioxidant activity against DPPH radicals at 73.27%. C-ALP-SLNs-F2 demonstrated higher antibacterial activity based on MIC values of 25, 50, and 50 µg/mL for P. aeruginosa, S. aureus, and E. coli, respectively. In addition, C-ALP-SLNs-F2 showed potential anticancer activity against A549, LoVo, and MCF-7 cell lines with IC50 values of 11.42 ± 1.16, 16.97 ± 1.93, and 8.25 ± 0.44, respectively. The results indicate that C-ALP-SLNs-F2 may be promising nanocarriers for enhancing ALP-based medicines.

Catalytic, Theoretical, and Biological Investigations of Ternary Metal (II) Complexes Derived from L-Valine-Based Schiff Bases and Heterocyclic Bases

A new series of ternary metal complexes, including Co(II), Ni(II), Cu(II), and Zn(II), were synthesized and characterized by elemental analysis and diverse spectroscopic methods. The complexes were synthesized from respective metal salts with Schiff’s-base-containing amino acids, salicylaldehyde derivatives, and heterocyclic bases. The amino acids containing Schiff bases showed promising pharmacological properties upon complexation. Based on satisfactory elemental analyses and various spectroscopic techniques, these complexes revealed a distorted, square pyramidal geometry around metal ions. The molecular structures of the complexes were optimized by DFT calculations. Quantum calculations were performed with the density functional method for which the LACVP++ basis set was used to find the optimized molecular structure of the complexes. The metal complexes were subjected to an electrochemical investigation to determine the redox behavior and oxidation state of the metal ions. Furthermore, all complexes were utilized for catalytic assets of a multi-component Mannich reaction for the preparation of -amino carbonyl derivatives. The synthesized complexes were tested to determine their antibacterial activity against E. coli, K. pneumoniae, and S. aureus bacteria. To evaluate the cytotoxic effects of the Cu(II) complexes, lung cancer (A549), cervical cancer (HeLa), and breast cancer (MCF-7) cells compared to normal cells, cell lines such as human dermal fibroblasts (HDF) were used. Further, the docking study parameters were supported, for which it was observed that the metal complexes could be effective in anticancer applications.