Metal Nanostructures for Environmental Pollutant Detection Based on Fluorescence

Silicon-Doped Carbon Dots Crosslinked Carboxymethyl Cellulose Gel: Detection and Adsorption of Fe3

The excessive emission of iron will pollute the environment and harm human health, so the fluorescence detection and adsorption of Fe3+ are of great significance. In the field of water treatment, cellulose-based gels have attracted wide attention due to their excellent properties and environmental friendliness. If carbon dots are used as a crosslinking agent to form a gel with cellulose, it can not only improve mechanical properties but also show good biocompatibility, reactivity, and fluorescence properties. In this study, silicon-doped carbon dots/carboxymethyl cellulose gel (DCG) was successfully prepared by chemically crosslinking biomass-derived silicon-doped carbon dots with carboxymethyl cellulose. The abundant crosslinking points endow the gel with excellent mechanical properties, with a compressive strength reaching 294 kPa. In the experiment on adsorbing Fe3+, the theoretical adsorption capacity reached 125.30 mg/g. The introduction of silicon-doped carbon dots confers the gel with excellent fluorescence properties and a good selective response to Fe3+. It exhibits a good linear relationship within the concentration range of 0-100 mg/L, with a detection limit of 0.6595 mg/L. DCG appears to be a good application prospect in the adsorption and detection of Fe3+.

Poly(ethylene glycol) Diacrylate Hydrogel with Silver Nanoclusters for Water Pb(II) Ions Filtering

Poly(ethylene glycol) diacrylate (PEGDA) hydrogels modified with luminescent silver nanoclusters (AgNCs) are synthesized by a photo-crosslinking process. The hybrid material thus obtained is employed to filter Pb(II) polluted water. Under the best conditions, the nanocomposite is able to remove up to 80-90% of lead contaminant, depending on the filter composition. The experimental results indicate that the adsorption process of Pb(II) onto the modified filter can be well modeled using the Freundlich isotherm, thus revealing that the chemisorption is the driving process of Pb(II) adsorption. In addition, the parameter n in the Freundlich model suggests that the adsorption process of Pb(II) ions in the modified hydrogel is favored. Based on the obtained remarkable contaminant uptake capacity and the overall low cost, this hybrid system appears to be a promising sorbent material for the removal of Pb(II) ions from aqueous media.

Dynamic light scattering and zeta-potential as a tool for understanding the mechanism of pesticides binding toward individual components of transition metal nanoparticles and graphene oxide hybrids

Pesticides present in their commercial formulations are studied for their preferable binding toward carbon-based graphene oxide (GO) or transition metal nanoparticles (Fe, Co, Ni, and Cu), present as hybrids. This simple study also reveals the mechanism of interaction of few selected different classes of pesticides, namely, λ-cyhalothrin, imidacloprid, and metsulfuron-methyl toward these hybrids. Individually, to study this comparative binding when hybrids are not used, the understanding of preferred binding toward any of these selected compounds could be challenging, costly, and time-consuming. Dynamic light scattering (DLS) is used to study the changes observed for hydrodynamic radius and zeta potential for the stability of the resulting products. This simple method can also be extended to identify the binding mechanism for other diverse set of combinations. These studies are supported by binding of GO with nanoparticles in batch adsorption and the best fit using Langmuir and Freundlich isotherms is presented. Moreover, pesticide adsorption toward GO-nanoparticle composites is also evidenced.

Glutathione Fluorescence Sensing Based on a Co-Doped Carbon Dot/Manganese Dioxide Nanocoral Composite

Glutathione (GSH) is an antioxidant thiol that has a vital role in the pathogenesis of various human diseases such as cardiovascular disease and cancer. Hence, it is necessary to study effective methods of GSH evaluation. In our work, an effective GSH sensor based on a nitrogen and phosphorus co-doped carbon dot (NPCD)-MnO₂ nanocoral composite was fabricated. In addition to utilizing the strong fluorescence of the NPCDs, we utilized the reductant ability of the NPCDs themselves to form MnO₂ and then the NPCD-MnO₂ nanocoral composite from MnO₄^-. The characteristics of the nanocoral composite were analyzed using various electron microscopy techniques and spectroscopic techniques. The overlap between the absorption spectrum of MnO₂ and the fluorescence emission spectrum of the NPCDs led to effective fluorescence resonance energy transfer (FRET) in the nanocoral composite, causing a decrease in the fluorescent intensity of the NPCDs. A linear recovery of the fluorescent intensity of the NPCDs was observed with the GSH level raising from 20 to 250 µM. Moreover, our GSH sensor showed high specificity and sensing potential in real samples with acceptable results.

Synthesis of intrinsic dual-emission type N,S-doped carbon dots for ratiometric fluorescence detection of Cr (VI) and application in cellular imaging

In this paper, intrinsic dual-emission fluorescent carbon dots (CDs) doped with N and S atoms have been firstly fabricated. The characterization results show that CDs are successfully synthesized with two separate fluorescence emissions at 468 nm and 628 nm, respectively. The strong and selective interaction of Cr (VI) ions with CDs lead to obvious fluorescence decrease of CDs at 468 nm, which is caused by a mixed quenching mechanism. At the same time, the fluorescence at 628 nm increase. Interestingly, the CDs solution show obvious color change under the daylight and UV light, so visualization detection of Cr (VI) can be realized in water samples. Based on the data of the emission intensity ratios of F₄₆₈/F₆₂₈, Cr (VI) can be detected from 3.8 to 38.9 μM combined with the linear correlation coefficient of 0.998, and the lowest detection concentration is 47.2 nM. The platform is satisfactorily applied to the detection of Cr (VI) ions in water samples. In addition, the CDs could be applied as fluorescent probes for cell imaging with dual fluorescent emission.

Recent advances on rapid detection and remediation of environmental pollutants utilizing nanomaterials-based (bio)sensors

Environmental safety has become a significant issue for the safety of living species, humans, and the ecosystem as a consequence of the harmful and detrimental consequences of various pollutants such as pesticides, heavy metals, dyes, etc., emitted into the surroundings. To resolve this issue, various efforts, legal acts, scientific and technological perspectives have been embraced, but still remain a global concern. Furthermore, due to non-portability, complex detection, and inappropriate on-site recognition of sophisticated laboratory tools, the real-time analysis of these environmental contaminants has been limited. As a result of innovative nano bioconjugation and nanofabrication techniques, nanotechnology enables enhanced nanomaterials (NMs) based (bio)sensors demonstrating ultra-sensitivity and a short detection time in real-time analysis, as well as superior sensitivity, reliability, and selectivity have been developed. Several researchers have demonstrated the potent detection of pollutants such as Hg²⁺ ion by the usage of AgNP-MD in electronic and optoelectronic methods with a detection limit of 5-45 μM which is quite significant. Taking into consideration of such tremendous research, herein, the authors have highlighted 21st-century strategies towards NMs based biosensor technology for pollutants detection, including nano biosensors, enzyme-based biosensors, electrochemical-based biosensors, carbon-based biosensors and optical biosensors for on-site identification and detection of target analytes. This article will provide a brief overview of the significance of utilizing NMs-based biosensors for the detection of a diverse array of hazardous pollutants, and a thorough understanding of the detection processes of NMs-based biosensors, as well as the limit of quantification (LOQ) and limit of detection (LOD) values, rendering researchers to focus on the world's need for a sustainable earth.

Analytical and regulatory considerations to mitigate highly hazardous toxins from environmental matrices

The ubiquitous occurrence, toxicological influence, and bioaccumulation of toxic entities, e.g., pesticides and toxic elements in the environment, biota, and humans, directly or indirectly, are posing severe social, ecological, and human health concerns. Much attention has been given to the rising bioaccumulation of toxins and their adverse impact on various environmental matrices. For example, the inappropriate and exacerbated use of xenobiotics and related hazardous substances have caused the deterioration of the agricultural environment, e.g., fertile soils where plants are grown. Moreover, the harmful toxins have negatively impacted human health through the trophic chains. However, the analytical and regulatory considerations to effectively monitor and mitigate any or many pesticides and toxic elements from environmental matrices are still lacking in the existing literature. For decades, the scientific community has overseen the consequences caused by pollutants, however, the improvement of analytical detection methods and regulatory considerations are not yet fully covered. This review covers the notable literature gap by stressing the development and deployment of robust analytical and regulatory considerations for an efficient abatement of hazardous substances. Following detailed information on occurrence, toxicological influence, and bioaccumulation of pesticides and toxic elements, the most relevant analytical detection tools and regulatory measures are given herein, with suitable examples, to mitigate or reduce the damage caused by these pollutants.

Luminol Doped Silica-Polymer Sensor for Portable Organic Amino Nitrogen and Ammonium Determination in Water

We propose a portable sensor, obtained by embedding luminol into the tetraethylorthosilicate/trietoxymethylsilane (TEOS/MTEOS) composite, for the quantitative determination of organic amino nitrogen and ammonium in water with the goal of achieving low levels of concentration. The method is based on the reaction between amino nitrogen compounds and hypochlorite to produce chloramino derivatives. Then, the remaining hypochlorite reacts with luminol sensor by producing a luminescence signal, which was measured by using a portable luminometer, being inversely proportional to nitrogen concentration. The liberation of the luminol from sensor is higher than 90% and the sensor is stable for at least a week at room temperature. This portable method was successfully validated and applied to the analysis of several real waters: fountain, river transition, lagoon, and seawater with recovery values between 92% and 112%, which indicated that the matrix effect was absent. The achieved limit of detection was around 10 µg·L−1, expressed as N. This sensor allows in situ monitoring owing to its simplicity, rapidity, and portability.