Hydrothermal Synthesis of Cellulose-Derived Carbon Nanospheres from Corn Straw as Anode Materials for Lithium ion Batteries

Multi layered porous nitrogen-rich biochar materials derived from soybean cellulose for lithium metal anode three-dimensional skeleton in lithium batteries

Lithium metal, renowned for its ultra-high theoretical specific capacity and low electrochemical potential, is a promising anode material for high-energy-density batteries. However, its commercialization is impeded by issues such as uncontrolled Li dendrite growth and volumetric expansion during cycling. Herein, we report the synthesis of a nitrogen- and Si3N4-enriched porous based biochar derived from antibiotic mycelial residues rich in soybean cellulose, which serves as a three-dimensional skeleton for Li metal anodes. This biochar, characterized by a high specific surface area and a porous structure, along with its excellent electrical conductivity, facilitates uniform Li nucleation and growth, thereby mitigating dendrite formation. Results show that the biochar electrode after lithium deposition can achieve stable cycling for over 1200 h at a capacity of 2 mAh cm-2. When integrated with a NCM cathode in a coin cell configuration, the coin-type full cell demonstrates a capacity retention of 85.7 % after 300 cycles at a 0.3C rate. Additionally, pouch cell tests exhibit superior cycling stability with high-capacity retention. This study not only presents an innovative approach to the management of harmful biological waste high in soybean cellulose but also contributes to the advancement of Li metal anode materials for next-generation batteries.

The Role of Lithium-Ion Batteries in the Growing Trend of Electric Vehicles

Within the automotive field, there has been an increasing amount of global attention toward the usability of combustion-independent electric vehicles (EVs). Once considered an overly ambitious and costly venture, the popularity and practicality of EVs have been gradually increasing due to the usage of Li-ion batteries (LIBs). Although the topic of LIBs has been extensively covered, there has not yet been a review that covers the current advancements of LIBs from economic, industrial, and technical perspectives. Specific overviews on aspects such as international policy changes, the implementation of cloud-based systems with deep learning capabilities, and advanced EV-based LIB electrode materials are discussed. Recommendations to address the current challenges in the EV-based LIB market are discussed. Furthermore, suggestions for short-term, medium-term, and long-term goals that the LIB-EV industry should follow are provided to ensure its success in the near future. Based on this literature review, it can be suggested that EV-based LIBs will continue to be a hot topic in the years to come and that there is still a large amount of room for their overall advancement.

Sustainable Biomass-Derived Carbon Electrodes for Potassium and Aluminum Batteries: Conceptualizing the Key Parameters for Improved Performance

The development of sustainable, safe, low-cost, high energy and density power-density energy storage devices is most needed to electrify our modern needs to reach a carbon-neutral society by ~2050. Batteries are the backbones of future sustainable energy sources for both stationary off-grid and mobile plug-in electric vehicle applications. Biomass-derived carbon materials are extensively researched as efficient and sustainable electrode/anode candidates for lithium/sodium-ion chemistries due to their well-developed tailored textures (closed pores and defects) and large microcrystalline interlayer spacing and therefore opens-up their potential applications in sustainable potassium and aluminum batteries. The main purpose of this perspective is to brief the use of biomass residues for the preparation of carbon electrodes for potassium and aluminum batteries annexed to the biomass-derived carbon physicochemical structures and their aligned electrochemical properties. In addition, we presented an outlook as well as some challenges faced in this promising area of research. We believe that this review enlightens the readers with useful insights and a reasonable understanding of issues and challenges faced in the preparation, physicochemical properties and application of biomass-derived carbon materials as anodes and cathode candidates for potassium and aluminum batteries, respectively. In addition, this review can further help material scientists to seek out novel electrode materials from different types of biomasses, which opens up new avenues in the fabrication/development of next-generation sustainable and high-energy density batteries.

Facile Synthesis of Sustainable Activated Biochars with Different Pore Structures as Efficient Additive-Carbon-Free Anodes for Lithium- and Sodium-Ion Batteries

The present work elucidates facile one-pot synthesis from biomass forestry waste (Norway spruce bark) and its chemical activation yielding high specific surface area (S _BET) biochars as efficient lithium- and sodium-ion storage anodes. The chemically activated biochar using ZnCl₂ (Biochar-1) produced a highly mesoporous carbon containing 96.1% mesopores in its structure as compared to only 56.1% mesoporosity from KOH-activated biochars (Biochar-2). The latter exhibited a lower degree of graphitization with disordered and defective carbon structures, while the former presented more formation of ordered graphite sheets in its structure as analyzed from Raman spectra. In addition, both biochars presented a high degree of functionalities on their surfaces but Biochar-1 presented a pyridinic-nitrogen group, which helps improve its electrochemical response. When tested electrochemically, Biochar-1 showed an excellent rate capability and the longest capacity retentions of 370 mA h g^-1 at 100 mA g^-1 (100 cycles), 332.4 mA h g^-1 at 500 mA g^-1 (1000 cycles), and 319 mA h g^-1 at 1000 mA g^-1 after 5000 cycles, rendering as an alternative biomass anode for lithium-ion batteries (LIBs). Moreover, as a negative electrode in sodium-ion batteries, Biochar-1 delivered discharge capacities of 147.7 mA h g^-1 at 50 mA g^-1 (140 cycles) and 126 mA h g^-1 at 100 mA g^-1 after 440 cycles.

Structural Evolution of Graphitic Carbon Derived from Ionic Liquids-Dissolved Cellulose and Its Application as Lithium-Ion Battery Anodes

With an attempt to replace petroleum-derived commercial graphite (CG) with biomass-derived carbon, microcrystalline cellulose (MCC) dissolved in 1-butyl-3-methylimidazolium acetate (BMIMAcO) was facilely carbonized to prepare cellulose-derived carbon under a low-temperature range of 250-1600 °C. TEM and AFM results revealed structural evolution of carbon nanosheets starting from carbon dots. The XRD and Raman results showed that the degree of crystallinity of the MCC-derived carbon was apparently enhanced as the temperature was increased to 93.02% at 1600 °C, while the XPS results revealed that the nitrogen content was greatly reduced with increasing temperature. BMIMAcO not only induced low-temperature graphitization of MCC-derived carbon but also provided nitrogen doping for the carbon. Used as an anode of lithium-ion batteries (LIBs), the carbon synthesized at 750 °C showed the best cyclic stability and reversible capacity (1052.22 mAh g^-1 at 0.5 A g^-1 after 100 cycles and 1017.46 mAh g^-1 at 1 A g^-1 after 1000 cycles) compared to other MCC-derived carbon and CG. In addition, the costs of cellulose-derived carbon are much lower than those of the petroleum-derived graphite, showing environmental and economical merits for LIB anode production.

Cotton stalk-derived hydrothermal carbon for methylene blue dye removal: investigation of the raw material plant tissues

Conversion of the abundant agricultural residual cotton stalk (CS) into useful chemicals or functional materials could alleviate the fossil fuels caused energy shortages and environmental crises. Although some advances have been achieved, less attention has been paid to the plant tissues effect. In this study, the plant tissue of CS was changed by part degradation of some components (hemicelluloses and lignin, for example) with the aid of acid/base (or both). The pretreated CS was transformed into hydrochar by hydrothermal carbonization (HTC) method. Morphological and chemical compositions of CS hydrochar were analyzed by various techniques, including elemental analysis, Fourier transform infrared (FTIR), BET analysis, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). Methylene blue (MB) removal of prepared CS hydrochar was used to evaluate CS hydrochar pollutions adsorption capacity. Results reveal acid/base (or both) pretreatment is beneficial for CS raw material to prepare high-quality CS hydrochar. The effects of some parameters, such as initial MB concentration, temperature, pH value and recyclability on the adsorption of MB onto both acid and base-pretreated CS hydrochar (CS-H2SO4 + NaOH-HTC) were studied. The present work exhibits the importance of agricultural waste biomass material plant tissues on its derived materials, which will have a positive effect on the direct utilization of waste biomass.

Electrochemical energy storage electrodes from fruit biochar

This review investigates the electrochemical energy storage electrode (EESE) as the most important part of the electrochemical energy storage devices (EES) prepared from fruit-derived carbon. The EES devices include batteries, supercapacitors, and hybrid devices that have various regular and advanced applications. The preparation of EESE from fruit wastes not only reduce the price of the electrode but also lead to enhance the electrochemical properties of the electrode. The astonishing results of fruits biochar at electrochemical analyses guarantee the performance of these electrodes as EESE. Also, using fruit waste as the precursor of the EESE due to protect the environment and reduce environmental pollutions.

Olive mill wastewater: From a pollutant to green fuels, agricultural and water source and bio-fertilizer - Hydrothermal carbonization

Hydrothermal carbonization (HTC) is considered as a promising technique for wastes conversion into carbon rich materials for various energetic, environmental and agricultural applications. In this work, the HTC of olive mill wastewater (OMWW) was investigated at different temperatures (180-220 °C) and both, the solid (i.e., hydrochars) and the final process liquid derived from the thermal conversion process were deeply analyzed. Results showed that the solid yield was affected by the temperature, i.e., decrease from 57% to 25% for temperatures of 180 °C and 220 °C, respectively. Furthermore, the hydrochars presented an increasing fixed carbon percentage with the increase of the carbonization temperature, suggesting that decarboxylation is the main reaction driving the HTC process. The decrease in the O/C ratio promoted an increase of the high heating value (HHV) by 32% for hydrochar prepared at 220 °C. The process liquids were sampled and their organic contents were analyzed using GC-MS technique. Acids, alcohols, phenols and sugar derivatives were detected and their concentrations varied with carbonization temperatures. The assessment of the physico-chemical properties of the generated HTC by-products suggested the possible application of the hydrochars for energetic insights while the liquid fraction could be practical for in agricultural field.

Hydrothermal Carbonization as a Valuable Tool for Energy and Environmental Applications: A Review

Hydrothermal carbonization (HTC) represents an efficient and valuable pre-treatment technology to convert waste biomass into highly dense carbonaceous materials that could be used in a wide range of applications between energy, environment, soil improvement and nutrients recovery fields. HTC converts residual organic materials into a solid high energy dense material (hydrochar) and a liquid residue where the most volatile and oxygenated compounds (mainly furans and organic acids) concentrate during reaction. Pristine hydrochar is mainly used for direct combustion, to generate heat or electricity, but highly porous carbonaceous media for energy storage or for adsorption of pollutants applications can be also obtained through a further activation stage. HTC process can be used to enhance recovery of nutrients as nitrogen and phosphorous in particular and can be used as soil conditioner, to favor plant growth and mitigate desertification of soils. The present review proposes an outlook of the several possible applications of hydrochar produced from any sort of waste biomass sources. For each of the applications proposed, the main operative parameters that mostly affect the hydrochar properties and characteristics are highlighted, in order to match the needs for the specific application.

Abidin Z. Sustainable Development of Enhanced Luminescence Polymer-Carbon Dots Composite Film for Rapid Cd2+ Removal from Wastewater

As a remedy for environmental pollution, a versatile synthetic approach has been developed to prepare polyvinyl alcohol (PVA)/nitrogen-doped carbon dots (CDs) composite film (PVA-CDs) for removal of toxic cadmium ions. The CDs were first synthesized using carboxymethylcellulose (CMC) of oil palms empty fruit bunch wastes with the addition of polyethyleneimine (PEI) and then the CDs were embedded with PVA. The PVA-CDs film possess synergistic functionalities through increasing the content of hydrogen bonds for chemisorption compared to the pure CDs. Optical analysis of PVA-CDs film was performed by ultraviolet-visible and fluorescence spectroscopy. Compared to the pure CDs, the solid-state PVA-CDs displayed a bright blue color with a quantum yield (QY) of 47%; they possess excitation-independent emission and a higher Cd2+ removal efficiency of 91.1%. The equilibrium state was achieved within 10 min. It was found that adsorption data fit well with the pseudo-second-order kinetic and Langmuir isotherm models. The maximum adsorption uptake was 113.6 mg g-1 at an optimal pH of 7. Desorption experiments showhe that adsorbent can be reused fruitfully for five adsorption-desorption cycles using 0.1 HCl elution. The film was successfully applied to real water samples with a removal efficiency of 95.34% and 90.9% for tap and drinking water, respectively. The fabricated membrane is biodegradable and its preparation follows an ecofriendly green route.

Preliminary Synthesis of Calcium Silicates using Oil Palm Leaves and Eggshells

A new synthetic procedure is described for the synthesis of calcium silicate derivatives, using natural resources such as eggshell (ES) for calcium and oil palm leaves (OPL) for silica, which do not require prepurification. The reaction is performed by directly converting two weight ratio of the precursors, ES:3OPL and ES:6OPL, to dried-powder form by heat treatment at 900 °C for two hours. The results demonstrate that the concentration of the precursors has an effect on the morphology and crystallinity of the calcium silicate derivatives, mainly Ca2SiO4 and CaSiO3. X-ray diffraction results reveal that the reaction product obtained using a 1:3 ratio is quite pure, and mainly consisted of calcium silicate in the form of Ca2SiO4. The CaSiO3 was also identified in ES:6OPL, together with a small amount of excess non-reacted crystalline silica. Furthermore, a scanning electron microscopy analysis shows that both reaction products have a coarse surface. Copyright © 2020 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Hierarchically Porous Carbon Derived from Biomass Reed Flowers as Highly Stable Li-Ion Battery Anode

As lithium-ion battery (LIB) anode materials, porous carbons with high specific surface area are highly required because they can well accommodate huge volume expansion/contraction during cycling. In this work, hierarchically porous carbon (HPC) with high specific surface area (~1714.83 m2 g-1) is synthesized from biomass reed flowers. The material presents good cycling stability as an LIB anode, delivering an excellent reversible capacity of 581.2 mAh g-1 after cycling for 100 cycles at a current density of 100 mA g-1, and still remains a reversible capacity of 298.5 mAh g-1 after cycling for 1000 cycles even at 1000 mA g-1. The good electrochemical performance can be ascribed to the high specific surface area of the HPC network, which provides rich and fast paths for electron and ion transfer and provides large contact area and mutual interactions between the electrolyte and active materials. The work proposes a new route for the preparation of low cost carbon-based anodes and may promote the development of other porous carbon materials derived from various biomass carbon sources.

Efficient removal of Cu(ii) from aqueous systems using enhanced quantum yield nitrogen-doped carbon nanodots

Low value waste resources have been converted into value-added luminescence carbon dots for copper adsorption from contaminated water.