Synthesis of Fe/Ni Bimetallic Nanoparticles and Application to the Catalytic Removal of Nitrates from Water

Optimized bimetallic ratios for durable membrane catalyst-film reactors in treating nitrate-polluted water

Nitrate contamination of surface and ground water is a significant global challenge. Most current treatment technologies separate nitrate from water, resulting in concentrated wastestreams that need to be managed. Membrane Catalyst-film Reactors (MCfR), which utilize in-situ produced nanocatalysts attached to hydrogen-gas-permeable hollow-fiber membranes, offer a promising alternative for denitrification without generating a concentrated wastestream. In hydrogen-based MCfRs, bimetallic nano-scale catalysts reduce nitrate to nitrite and then further to di-nitrogen or ammonium. This study first investigated how different molar ratios of indium-to-palladium (In:Pd) catalytic films influenced denitrification rates in batch-mode MCfRs. We evaluated eleven In-Pd bimetallic catalyst films, with In:Pd molar ratios from 0.0029 to 0.28. Nitrate-removal exhibited a volcano-shaped dependence on In content, with the highest nitrate removal (0.19 mgNO3--N-min-1 L-1) occurring at 0.045 mol In/mol Pd. Using MCfRs with the optimal In:Pd loading, we treated nitrate-spiked tap water in continuous-flow for >60 days. Nitrate removal and reduction occurred in three stages: substantial denitrification in the first stage, a decline in denitrification efficiency in the second stage, and stabilized denitrification in the third stage. Factors contributing to the slowdown of denitrification were: loss of Pd and In catalysts from the membrane surface and elevated pH due to hydroxide ion production. Sustained nitrate removal will require that these factors be mitigated.

A Viable and sustainable flat- membrane plate-and-frame module for spent acid regeneration and metal ion recovery

This study provides techno-economical insights for acid regeneration and metal recovery from spent acidic wastewater by a diffusion dialysis plate-and-frame module using Quaternized Polyepichlorohydrin - Polyacrylonitrile (QPECH-PAN) membranes. Quaternized Polyepichlorohydrin (QPECH) membranes were synthesized using 1,4-diazobicyclo[2.2.2]octane (DABCO) and blended with polyacrylonitrile (PAN). Said membranes were analyzed in terms of their mechanical, physicochemical, and electrochemical characteristics, providing significant results comparable to the commercial membranes (IEC: 1.76 mmol/g, SD: 60.91%, Permselectivity: 79.5 ± 0.31%, and transport no. t_(-): 0.5). Mechanical characterization reveals that the QPECH-PAN membranes possess comparable mechanical strengths (tensile strength: 329.56 MPa). Further, sheet resistivity (6.11 Ω cm²) and conductivity (0.16 S/cm²) reveal the relative conductive nature of these membranes. Percent acid recovery and metal ion recovery ratios were found to be 72% and 48% respectively, and separation factors were 126.8 and 84.57 respectively. The QPECH-PAN membrane's techno-economic feasibility was also analyzed within the context of a textile industry processing up to 5500 kg/d of acidic wastewater. It indicates a potential cost saving of US $0.53 million on H₂SO₄ and NaOH, as well as an OPEX saving of 40.91% against a semi-continuous acid neutralizer.

Comparing methods to deposit Pd-In catalysts on hydrogen-permeable hollow-fiber membranes for nitrate reduction

Catalytic hydrogenation of nitrate in water has been studied primarily using nanoparticle slurries with constant hydrogen-gas (H₂) bubbling. Such slurry reactors are impractical in full-scale water treatment applications because 1) unattached catalysts are difficult to be recycled/reused and 2) gas bubbling is inefficient for delivering H₂. Membrane Catalyst-film Reactors (MCfR) resolve these limitations by depositing nanocatalysts on the exterior of gas-permeable hollow-fiber membranes that deliver H₂ directly to the catalyst-film. The goal of this study was to compare the technical feasibility and benefits of various methods for attaching bimetallic palladium/indium (Pd/In) nanocatalysts for nitrate reduction in water, and subsequently select the most effective method. Four Pd/In deposition methods were evaluated for effectiveness in achieving durable nanocatalyst immobilization on the membranes and repeatable nitrate-reduction activity: (1) In-Situ MCfR-H₂, (2) In-Situ Flask-Synthesis, (3) Ex-Situ Aerosol Impaction-Driven Assembly, and (4) Ex-Situ Electrostatic. Although all four deposition methods achieved catalyst-films that reduced nitrate in solution (≥ 1.1 min^-1gPd^-1), three deposition methods resulted in significant palladium loss (>29%) and an accompanying decline in nitrate reactivity over time. In contrast, the In-Situ MCfR-H₂ deposition method had negligible Pd loss and remained active for nitrate reduction over multiple operational cycles. Therefore, In-Situ MCfR-H₂ emerged as the superior deposition method and can be utilized to optimize catalyst attachment, nitrate-reduction, and N₂ selectivity in future studies with more complex water matrices, longer treatment cycles, and larger reactors.

Micro-electrolysis based nitrate reduction from aqueous solution by CNTs-Al-Cu composite under alkaline environment

CNTs-Al was prepared by ball milling combined with sintering process and then used for CNTs-Al-Cu synthesis with chemical deposition method. The obtained CNTs-Al-Cu composite was systematically characterized and its NO₃^--N reduction performance under alkaline condition was also evaluated. As indicated by the reduction batch experiment, 80.2% of NO₃^--N removal efficiency was obtained in 90 min at pH of 9. The product of the reduction process was dominated by NO₂^--N, which was further reduced to harmless N₂. The reusability of CNTs-Al-Cu composite was evaluated, and the experiment results showed that 68.1% of NO₃^--N removal efficiency was maintained after 3 cycles of regeneration. Finally, based on the characterization results and kinetic analysis, it was concluded that micro-electrolysis was mainly responsible for the removal of NO₃^--N by CNTs-Al-Cu.

Recyclable Cu-Ag bimetallic nanocatalyst for radical scavenging, dyes removal and antimicrobial applications

An ecofriendly and cost effective green method has been used for the synthesis of recyclable, high functional nanoparticles. Bimetallic nanoparticles (BmNPs), Cu-Ag, have been synthesized using beetroot extract as reducing and capping agent. Formation of BmNPs was initially confirmed by UV-visible analysis, having distinct peaks of Ag at 429 nm and Cu at 628 nm. FTIR analysis also confirmed the association of bioactive phytochemicals with Cu-Ag nanoparticles. Crystallinity and morphology of BmNPs was determined through X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), dynamic light scattering (DLS) and energy dispersion X-ray spectroscopy (EDAX). The size of spherical shape Cu-Ag BmNPs was found to be 75.58 nm and EDAX studies confirmed the percent elemental composition of Cu and Ag in synthesized nanocatalyst. Results of different analysis provided supported evidences regarding the formation of BmNPs. Catalytic potential of BmNPs was tested for the degradation of rhodamine B (Rh-B), methylene blue (MB) and methyl orange (MO) dyes. Cu-Ag BmNPs exhibited outstanding catalytic activity for the degradation of selected organic dyes and percent degradation was recorded more than 90% for each dye. In addition, antiradical property of BmNPs was tested employing DPPH^● and ABTS^●+ assays and it was found to be promising. Synthesized BmNPs also exhibited strong antimicrobial activity against Salmonella typhimurium and Bacillus subtilis. Recyclability of nanoparticles was also evaluated and recovery from dye degradation reaction mixture was successfully achieved. The recovered nanoparticles exhibited same catalytic potential for the degradation of Rh-B. The objective of the current study was to synthesize BmNPs Cu-Ag employing a cost effective green method having promising catalytic, antiradical and antimicrobial potential. Further, BmNPs were reused after recovery from catalytic reactions, proving that BmNPs can be recycled having the same efficiency as that of a freshly prepared Cu-Ag BmNPs.

Evaluation of In Vitro Cytotoxic, Genotoxic, Apoptotic, and Cell Cycle Arrest Potential of Iron-Nickel Alloy Nanoparticles

The use of iron-nickel alloy nanoparticles (Fe-Ni ANPs) is increasing daily in various fields. People are increasingly exposed to these nanoparticles for occupational and environmental reasons. Our study determined some of the effects of Fe-Ni ANP exposure and impacts on human health at the cellular level. The cytotoxic and genotoxic potentials of Fe-Ni ANPs were investigated by XTT, clonogenic, comet, and GammaH2AX analyses using Beas-2B cells. Annexin V, multicaspase, and cell cycle arrest methods were used to understand the apoptotic mechanism of action. The intracellular ROS method was used to determine the primary mechanism that leads to cytotoxic and genotoxic activity. The Fe-Ni ANPs showed cytotoxic activity with the XTT and clonogenic methods: they had genotoxic potential, as demonstrated via genotoxicity methods. It was determined that the cytotoxic effect was realized by the caspase-dependent apoptotic pathway, and the cells were stopped at the G0/G1 stage by Fe-Ni ANPs. Increased intracellular ROS due to Fe-Ni ANPs led to cytotoxic, genotoxic, and apoptotic activity. Potential risks to human health due to Fe-Ni ANPs were then demonstrated at the cellular level.

Screening of bimetallic electrocatalysts for water purification with machine learning

Electrocatalysis provides a potential solution to [Formula: see text] pollution in wastewater by converting it to innocuous N2 gas. However, materials with excellent catalytic activity are typically limited to expensive precious metals, hindering their commercial viability. In response to this challenge, we have conducted the most extensive computational search to date for electrocatalysts that can facilitate [Formula: see text] reduction reaction, starting with 59 390 candidate bimetallic alloys from the Materials Project and Automatic-Flow databases. Using a joint machine learning- and computation-based screening strategy, we evaluated our candidates based on corrosion resistance, catalytic activity, N2 selectivity, cost, and the ability to synthesize. We found that only 20 materials will satisfy all criteria in our screening strategy, all of which contain varying amounts of Cu. Our proposed list of candidates is consistent with previous materials investigated in the literature, with the exception of Cu–Co and Cu–Ag based compounds that merit further investigation.

Innovative green/non-toxic Bi2S3@g-C3N4 nanosheets for dark antimicrobial activity and photocatalytic depollution: Turnover assessment

Herein, green and non-toxic bismuth sulphide@graphitic carbon nitride (Bi₂S₃@g-C₃N₄) nanosheets (NCs) were firstly synthesized by ultrasonicated-assisted method and characterized with different tool. Bi₂S₃@g-C₃N₄ NCs antimicrobial activity tested against three types of microbes. As well the heterostructured Bi₂S₃@g-C₃N₄ NCs was investigated for removing dye and hexavalent chromium under visible light and showed high efficiency of photocatalytic oxidation/reduction higher than g-C₃N₄ alone, attributing to lower recombination photogenerated electron-hole pairs. Bi₂S₃@g-C₃N₄ NCs showed high antimicrobial efficiencies against Staphylococcus aureus (S. aureus) as a Gram positive bacterium, Escherichia coli (E. Coli)as a Gram negative bacterium and Candida albicans (C. albicans) and that the disinfection rates are 99.97%, 99.98% and 99.92%, respectively. The core mechanism is that the bacterial membrane could be destroyed by reactive oxygen species. The Bi₂S₃@g-C₃N₄ NCs is promising for environmental disinfection including water and public facilities disinfection and solar photocatalytic depollution. Turnover number (TON) and Turnover frequency (TOF) are used as concise assessment indicator for photocatalytic efficiency.

A new supported Cu/Pd bimetallic nanoparticles composites prestoring reductant for nitrate removal: high reactivity and N2 selectivity

Catalytic hydrogen reduction appears to be a promising strategy for nitrate removal. However, the danger and low utilization of H₂ are the disadvantages of catalytic hydrogen reduction. Sodium borohydride (NaBH₄), considered a potential candidate for hydrogen storage, has been investigated as an electron source for the catalytic reduction of contaminants. However, extensive use of NaBH₄ makes commercialization costly and causes environmental pollution. In this study, we prepared supported Cu/Pd bimetallic nanoparticles that could prestore hydrogen. No additional reducing agent was required during the nitrate reduction process. The performance and mechanism of Cu/Pd bimetallic nanoparticles for nitrate reduction are discussed. Good performance was obtained with high reactivity (99.04% nitrate removal efficiency) and high selectivity for N₂ (94.71%). The Cu/Pd bimetallic catalyst could be recovered by NaBH₄ for 5 cycles. Moreover, a 97.49% nitrate removal efficiency was obtained for actual wastewater, indicating good prospects for nitrate reduction applications.

Adsorption Studies on Magnetic Nanoparticles Functionalized with Silver to Remove Nitrates from Waters

This paper presents a novel procedure for the treatment of contaminated water with high concentrations of nitrates, which are considered as one of the main causes of the eutrophication phenomena. For this purpose, magnetic nanoparticles functionalized with silver (Fe3O4@AgNPs) were synthesized and used as an adsorbent of nitrates. Experimental conditions, including the pH, adsorbent and adsorbate dose, temperature and contact time, were analyzed to obtain the highest adsorption efficiency for different concentration of nitrates in water. A maximum removal efficiency of 100% was reached for 2, 5, 10 and 50 mg/L of nitrate at pH = 5, room temperature, and 50, 100, 250 and 500 µL of Fe3O4@AgNPs, respectively. The characterization of the adsorbent, before and after adsorption, was performed by energy dispersive X-ray spectroscopy, scanning electron microscopy, Brunauer-Emmett-Teller analysis and Fourier-transform infrared spectroscopy. Nitrates can be desorbed, and the adsorbent can be reused using 500 µL of NaOH solution 0.01 M, remaining unchanged for the first three cycles, and exhibiting 90% adsorption efficiency after three regenerations. A deep study on equilibrium isotherms reveals a pH-dependent behavior, characterized by Langmuir and Freundlich models at pH = 5 and pH = 1, respectively. Thermodynamic studies were consistent with physicochemical adsorption for all experiments but showed a change from endothermic to exothermic behavior as the temperature increased. Interference studies of other ions commonly present in water were carried out, enabling this procedure as very selective for nitrate ions. In addition, the method was applied to real samples of seawater, showing its ability to eliminate the total nitrate content in eutrophized waters.

Degradation Kinetics of Methyl Orange Dye in Water Using Trimetallic Fe/Cu/Ag Nanoparticles

The release of azo dye contaminants from textile industries into the environment is an issue of major concern. Nanoscale zerovalent iron (nZVI) has been extensively studied in the degradation of azo dye pollutants such as methyl orange (MO). In this study, iron was coupled with copper and silver to make trimetallic Fe/Cu/Ag nanoparticles, in order to enhance the degradation of MO and increase reactivity of the catalyst by delaying the rate of oxidation of iron. The synthesis of the trimetallic nanoparticles (Fe/Cu/Ag) was carried out using the sodium borohydride reduction method. The characterization of the particles was performed using XRD, XPS, EDX, and TEM. The analyses confirmed the successful synthesis of the nanoparticles; the TEM images also showed the desired structures and geometry of the nanoscale zerovalent iron particles. The assessment of the nanoparticles in the degradation of methyl orange showed a notable degradation within few minutes into the reaction. The effect of parameters such as nanoparticle dosage, initial MO concentration, and the solution pH on the degradation of MO using the nanoparticles was investigated. Methyl orange degradation efficiency reached 100% within 1 min into the reaction at a low pH, with lower initial MO concentration and higher nanoparticle dosage. The degradation rate of MO using the nanoparticles followed pseudo first-order kinetics and was greatly influenced by the studied parameters. Additionally, LC-MS technique confirmed the degradation of MO within 1 min and that the degradation occurs through the splitting of the azo bond. The Fe/Cu/Ag trimetallic nanoparticles have proven to be an appropriate and efficient alternative for the treatment of dye wastewater.