Formulation and Characterization of Native and Crosslinked Hyaluronic Acid Microspheres for Dermal Delivery of Sodium Ascorbyl Phosphate: A Comparative Study

Bioinspired synthesis of bioactive glass nanocomposites for hyaluronic acid delivery to bone and skin

In this study, we present nanocomposites of bioactive glass (BG) and hyaluronic acid (HA) (nano-BGHA) for effective delivery of HA to skin and bone. The synthesis of the nanocomposites has been carried out through the bio-inspired method, which is a modification of the traditional Stober's synthesis as it avoids using ethanol, ammonia, synthetic surfactants, or high-temperature calcination. This environmentally friendly, bio-inspired route allowed the synthesis of mesoporous nanocomposites with an average hydrodynamic radius of ∼190 nm and an average net surface charge of ∼-21 mV. Most nanocomposites are amorphous and bioactive in nature with over 70 % cellular viability for skin and bone cell lines even at high concentrations, along with high cellular uptake (90-100 %). Furthermore, the nanocomposites could penetrate skin cells in a transwell set-up and artificial human skin membrane (StratM®), thus depicting an attractive strategy for the delivery of HA to the skin. The purpose of the study is to develop nanocomposites of HA and BG that can have potential applications in non-invasive treatments that require the delivery of high molecular weight HA such as in the case of osteoarthritis, sports injury treatments, eye drops, wound healing, and some anticancer treatments, if further investigated. The presence of BG further enhances the range to bone-related applications. Additionally, the nanocomposites can have potential cosmeceutical applications where HA is abundantly used, for instance in moisturizers, dermal fillers, shampoos, anti-wrinkle creams, etc.

The Formulation and Evaluation of Deep Eutectic Vehicles for the Topical Delivery of Azelaic Acid for Acne Treatment

The current work was aimed at the development of a topical drug delivery system for azelaic acid (AzA) for acne treatment. The systems tested for this purpose were deep eutectic systems (DESs) prepared from choline chloride (CC), malonic acid (MA), and PEG 400. Three CC to MA and eight different MA: CC: PEG400 ratios were tested. The physical appearance of the tested formulations ranged from solid and liquid to semisolid. Only those that showed liquid formulations of suitable viscosity were considered for further investigations. A eutectic mixture made from MA: CC: PEG400 1:1:6 (MCP 116) showed the best characteristics in terms of viscosity, contact angle, spreadability, partition coefficient, and in vitro diffusion. Moreover, the MCP116 showed close rheological properties to the commercially available market lead acne treatment product (Skinorin®). In addition, the formula showed synergistic antibacterial activity between the MA moiety of the DES and the AzA. In vitro diffusion studies using polyamide membranes demonstrated superior diffusion of MCP116 over the pure drug and the commercial product. No signs of skin irritation and edema were observed when MCP116 was applied to rabbit skin. Additionally, the MCP116 was found to be, physically and chemically, highly stable at 4, 25, and 40 °C for a one-month stability study.

A scalable culture system incorporating microcarrier for specialised mesenchymal stem cells from human embryonic stem cells

Mesenchymal stromal cells (MSCs) derived from human embryonic stem cells (hESCs) are a desirable cell source for cell therapy owing to their capacity to be produced stably and homogeneously in large quantities. However, a scalable culture system for hPSC-derived MSCs is urgently needed to meet the cell quantity and quality requirements of practical clinical applications. In this study, we developed a new microcarrier with hyaluronic acid (HA) as the core material, which allowed scalable serum-free suspension culture of hESC-derived MSCs (IMRCs). We used optimal microcarriers with a coating collagen concentration of 100 ​μg/mL or concave-structured surface (cHAMCs) for IMRC amplification in a stirred bioreactor, expanding IMRCs within six days with the highest yield of over one million cells per milliliter. In addition, the harvested cells exhibited high viability, immunomodulatory and regenerative therapeutic promise comparable to monolayer cultured MSCs while showing more increased secretion of extracellular matrix (ECM), particularly collagen-related proteins. In summary, we have established a scalable culture system for hESC-MSCs, providing novel approaches for future cell therapies.

A Safe-by-Design Approach for the Synthesis of a Novel Cross-Linked Hyaluronic Acid with Improved Biological and Physical Properties

Hyaluronic acid (HA) is a polymer with unique biological properties that has gained in interest over the years, with applications in pharmaceutical, cosmetic, and biomedical fields; however, its widespread use has been limited by its short half-life. Therefore, a new cross-linked hyaluronic acid was designed and characterized using a natural and safe cross-linking agent, such as arginine methyl ester, which provided improved resistance to enzymatic action, as compared to the corresponding linear polymer. The antibacterial profile of the new derivative was shown to be effective against S. aureus and P. acnes, making it a promising candidate for use in cosmetic formulations and skin applications. Its effect on S. pneumoniae, combined with its excellent tolerability profile on lung cells, also makes this new product suitable for applications involving the respiratory tract.

Extraction and characterization of hyaluronic acid from the eyeball of Nile Tilapia (Oreochromis niloticus)

Hyaluronic acid (HA) is a biopolymer of enormous value aggregation for in general industry. The vitreous humor of the eyeball from Nile tilapia contains appreciable amounts of hyaluronic acid. In this sense, the aim of this work was to extract and characterize hyaluronic acid from the eyeball of the Nile tilapia for biomedical applications, adding value to fish industry residues. The characterization by infra-red (FTIR), ¹³C nuclear magnetic resonance (NMR) and high performance liquid chromatography (HPLC) confirmed that hyaluronic acid was obtained. The gel permeation chromatography (GPC) showed that the obtained material presents a low molecular mass (37 KDa). Thermogravimetry (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) analysis showed that the materials present a thermal stability superior to the commercial hyaluronic acid from Streptococcus equi, with a partially crystalline character. The cytotoxicity assay (MTT method) with fibroblast cells (L929) demonstrated that the extracted biopolymer besides not being cytotoxic, was able to stimulate cell proliferation. Therefore, the hyaluronic acid extracted from this source of residue constitutes a product with biotechnological potential, which has adequate quality for wide biomedical applications.

Novel Crosslinked HA Hydrogel Films for the Immediate Release of Active Ingredients

Novel crosslinked hyaluronic acid (HA) hydrogel films were previously invented by reacting the HA polymer with the PT (Pentaerythritol Tetra-acrylate) crosslinker over basic pH conditions in the oven. HA is considered a natural polymer present in cosmetic as well as pharmaceutical formulations. This current study aimed to highlight the effect of loading method (post-loading and in situ) of selected actives (salicylic acid and niacinamide B3) in the hydrogel films and then study their release kinetics. Differential scanning colometry (DSC) and Fourier transform infrared spectroscopy (FTIR) analysis evidenced the loading of the actives and full release from the HA hydrogel films, while the scanning electron microscopy (SEM) demonstrated the morphological changes to the films during the study by comparing the average molecular weight between crosslinks (M¯c), gel fraction, crosslinking density (Ve) and mesh size (ξ) of the films. The loading percentage of the SA and B3 showed high percentage loading of actives via both loading methods. In conclusion, the (95–100%) release of the actives achieved from the HA hydrogel films within 10 min revealed that the films are an efficient immediate release system of actives.

In-Vitro Antibacterial Activity of Curcumin-Loaded Nanofibers Based on Hyaluronic Acid against Multidrug-Resistant ESKAPE Pathogens

Bacterial infections have accompanied humanity throughout its history and became vitally important in the pandemic area. The most pathogenic bacteria are multidrug-resistant strains, which have become widespread due to their natural biological response to the use of antibiotics, including uncontrolled use. The current challenge is finding highly effective antibacterial agents of natural origin, which, however, have low solubility and consequently poor bioavailability. Curcumin, derived from Curcuma longa, is an example of a natural biologically active agent with a wide spectrum of biological effects, particularly against Gram-positive bacteria. However, curcumin exhibits extremely low antibacterial activity against Gram-negative bacteria. Curcumin’s hydrophobicity limits its use in medicine. As such, various polymeric systems have been used, especially biopolymer-based electrospun nanofibers. In the present study, the technological features of the fabrication of curcumin-loaded hyaluronic acid-based nanofibers are discussed in detail, their morphological characteristics, wettability, physico-chemical properties, and curcumin release profiles are demonstrated, and their antibacterial activity against multi-drug resistant ESKAPE pathogens (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter species) are evaluated. It is noteworthy that the fibers containing a stable HA–curcumin complex showed high antibacterial activity against both Gram-positive and Gram-negative bacteria, which is an undeniable advantage. It is expected that the results of this work will contribute to the development of antibacterial drugs for topical and internal use with high efficacy and considerably lower side effects.

Hyaluronic acid-Amphotericin B Nanocomplexes: a Promising Anti-Leishmanial Drug Delivery System

The development of an effective amphotericin B (AmB) formulation to replace actual treatments available for leishmaniasis, which present serious drawbacks, is a challenge. Here we report the development of hyaluronic...

Hyaluronic Acid Hydrogels for Controlled Pulmonary Drug Delivery-A Particle Engineering Approach

Hydrogels warrant attention as a potential material for use in sustained pulmonary drug delivery due to their swelling and mucoadhesive features. Herein, hyaluronic acid (HA) is considered a promising material due to its therapeutic potential, the effect on lung inflammation, and possible utility as an excipient or drug carrier. In this study, the feasibility of using HA hydrogels (without a model drug) to engineer inhalation powders for controlled pulmonary drug delivery was assessed. A combination of chemical crosslinking and spray-drying was proposed as a novel methodology for the preparation of inhalation powders. Different crosslinkers (urea; UR and glutaraldehyde; GA) were exploited in the hydrogel formulation and the obtained powders were subjected to extensive characterization. Compositional analysis of the powders indicated a crosslinked structure of the hydrogels with sufficient thermal stability to withstand spray drying. The obtained microparticles presented a spherical shape with mean diameter particle sizes from 2.3 ± 1.1 to 3.2 ± 2.9 μm. Microparticles formed from HA crosslinked with GA exhibited a reasonable aerosolization performance (fine particle fraction estimated as 28 ± 2%), whereas lower values were obtained for the UR-based formulation. Likewise, swelling and stability in water were larger for GA than for UR, for which the results were very similar to those obtained for native (not crosslinked) HA. In conclusion, microparticles could successfully be produced from crosslinked HA, and the ones crosslinked by GA exhibited superior performance in terms of aerosolization and swelling.

Molecular insights of hyaluronic acid-hydroxychloroquine conjugate as a promising drug in targeting SARS-CoV-2 viral proteins

In-silico anti-viral activity of Hydroxychloroquine (HCQ) and its Hyaluronic Acid-derivative (HA-HCQ) towards different SARS-CoV-2 protein molecular targets were studied. Four different SARS-CoV-2 proteins molecular target i.e., three different main proteases and one helicase were chosen for In-silico anti-viral analysis. The HA-HCQ conjugates exhibited superior binding affinity and interactions with all the screened SAR-CoV-2 molecular target proteins with the exception of a few targets. The study also revealed that the HA-HCQ conjugate has multiple advantages of efficient drug delivery to its CD44 variant isoform receptors of the lower respiratory tract, highest interactive binding affinity with SARS-CoV-2 protein target. Moreover, the HA-HCQ drug conjugate possesses added advantages of good biodegradability, biocompatibility, non-toxicity and non-immunogenicity. The prominent binding ability of HA-HCQ conjugate towards Mpro (PDB ID 5R82) and Helicase (PDB ID 6ZSL) target protein as compared with HCQ alone was proven through MD simulation analysis. In conclusion, our study suggested that further in-vitro and in-vivo examination of HA-HCQ drug conjugate will be useful to establish a promising early stage antiviral drug for the novel treatment of COVID-19.

Hyaluronic acid-graphene quantum dot nanocomposite: Potential target drug delivery and cancer cell imaging

Nowadays, the use of nanoparticle-based drug delivery systems has received much more attention. In this regard, here, graphene quantum dots (GQD) were used as drug carriers as well as imaging agents for cancer cells. In order to optimize the dose of the drug and reduce its side effects for healthy cells, hyaluronic acid was decorated on the surface of GQD to target cancer cells. The morphology and size of the synthesized nanoparticles alone and conjugated with hyaluronic acid were investigated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM); TEM images revealed a particles size of ∼5.67 and ∼8.69 nm, respectively. In the presence of 1-ethyl-3-[3(dimethylamino)propyl]carbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS), hyaluronic acid was bounded to dopamine hydrochloride and was prepared to react with GQD. After synthesis of graphene quantum dot-hyaluronic acid nanocomposite, curcumin (CUR) as a drug model was loaded on the synthesized nanocarriers, and its loading percentage was measured. The results showed that 98.02% of the drug was loaded on the nanocarriers. Also, the conjugation of each agent on the nanocarrier was approved by photoluminescence spectroscopy, Fourier transform infrared spectroscopy (FTIR), and UV-visible absorption techniques, and the results showed that the reactions were performed correctly. The effect of GQD, graphene quantum dot-hyaluronic acid, CUR, graphene quantum dot-hyaluronic acid-CUR on the viability of HeLa and L929 cells was evaluated by the MTT test. The results showed that the synthesized nanocarrier is completely biocompatible, and the drug nanocarriers reduce HeLa cell viability significantly due to the mediation of hyaluronic acid-CD44 for drug cell uptake. Simultaneously with drug delivery, the other goal of these nanocarriers is to image cancer cells by emitting fluorescent light. Fluorescent microscopy showed that these nanocarriers were adsorbed on HeLa cells, unlike L929 cells.

Miscibility Studies of Hyaluronic Acid and Poly(Vinyl Alcohol) Blends in Various Solvents

In this study, blends based on hyaluronic acid (HA) and poly(vinyl alcohol) (PVA) were characterized by the viscometric method, steady shear rheological tests and FTIR spectroscopy (Fourier Transform Infrared Spectroscopy). Viscometric studies showed the miscibility of HA and PVA in distilled water: 0.1 mol dm-3 NaCl and 0.1 mol dm-3 HCl. The method proposed by Garcia et al. was applied to assess the miscibility of polymers, while Δ[η] and Δb were introduced to determine of miscibility from the Huggins plots. The viscometric data showed that the attractive forces of HA and PVA were dominant when dissolved in 0.1 mol dm-3 NaCl and 0.1 mol dm-3 HCl, while, in distilled water, repulsive forces played the leading role. All polymer solutions were well characterized using a power law model, and exhibited non-Newtonian behavior with pseudoplasticity increasing with the increasing weight fraction of HA in 0.1 mol dm-3 NaCl and 0.1 mol dm-3 HCl. FTIR studies exhibited the formation of new intermolecular interactions between HA and PVA via hydrogen bonding.

Bioengineered three-dimensional physical constructs from quince seed mucilage for human adipose-derived mesenchymal stem cells

In this study, we aimed at fabricating a novel porous physical construct from quince seed mucilage for translational medicine applications. To achieve this goal, quince seed mucilage was extracted, molded, and freeze-dried. After being freeze-dried, the molded constructs were chemically crosslinked with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide/N-hydroxysuccinimide to maintain the mechanical integrity of the structure. The fabricated scaffolds were characterized in-depth by scanning electron microscopy, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller analysis, thermogravimetric analysis, and dynamic mechanical analysis in addition to the swelling, liquid uptake, and porosity tests. The extraction yield of mucilage was calculated to be 6.28% ± 0.40% (n = 3). The swelling ratio of crosslinked quince seed mucilage–derived scaffolds was found to be 12,677.50% ± 388.82% (n = 3), whereas the porosity of crosslinked quince seed mucilage–derived scaffolds was 83.43% ± 2.84% (n = 3). The analyses confirmed the crosslinked quince seed mucilage–derived scaffolds to be possessed interconnected, highly porous structure. Afterward, human adipose-derived mesenchymal stem cells were seeded on the crosslinked quince seed mucilage–derived scaffolds, and the cell viability on the scaffolds was assessed with 3-[4,5-dimethylthiazole-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay. The MTT results revealed the scaffolds not to be possessed any cytotoxic effect on seeded cells. Human adipose-derived mesenchymal stem cells adhesion and migration on the crosslinked quince seed mucilage–derived scaffolds were also evaluated histologically using hematoxylin and eosin staining in addition to scanning electron microscopy analysis. In conclusion, we believe that crosslinked quince seed mucilage–derived scaffolds have the potential to be an alternative to routinely used polysaccharides in regenerative medicine applications.

In vitro characterization of physico-chemical properties, cytotoxicity, bioactivity of urea-crosslinked hyaluronic acid and sodium ascorbyl phosphate nasal powder formulation

An innovative lyophilized dry powder formulation consisting of urea-crosslinked hyaluronic acid (HA-CL) and sodium ascorbyl phosphate (SAP) - LYO HA-CL - SAP- was prepared and characterized in vitro for physico-chemical and biological properties. The aim was to understand if LYO HA-CL - SAP could be used as adjuvant treatment for nasal inflammatory diseases. LYO HA-CL - SAP was suitable for nasal delivery and showed to be not toxic on human nasal septum carcinoma-derived cells (RPMI 2650 cells) at the investigated concentrations. It displayed porous, polygonal particles with unimodal, narrow size distribution, mean geometric diameter of 328.3 ± 27.5 µm, that is appropriate for nasal deposition with no respirable fraction and 88.7% of particles with aerodynamic diameter >14.1 µm. Additionally, the formulation showed wound healing ability on RPMI 2650 cells, and reduced interleukin-8 (IL-8) level in primary nasal epithelial cells pre-induced with lipopolysaccharide (LPS). Transport study across RPMI 2650 cells showed that HA-CL could act not only as carrier for SAP and active ingredient itself, but potentially also as mucoadhesive agent. In conclusion, these results suggest that HA-CL and SAP had anti-inflammatory activity and acted in combination to accelerate wound healing. Therefore, LYO HA-CL - SAP could be a potential adjuvant in nasal anti-inflammatory formulations.