One-pot Twostep Chemobiocatalytic Synthesis of a Furan Amino Acid from 5-Hydroxymethylfurfural

Recently, catalytic valorization of biomass-derived furans has received growing interest. 5-Aminomethyl-2-furancarboxylic acid (AMFC), a furan amino acid, holds great promise in the aeras of polymer and pharmaceutical, but its synthesis remains limited. In this work, we report a chemobiocatalytic route toward AMFC by combining laccase-TEMPO system and recombinant Escherichia coli (named E. coli_TAF) harboring ω-transaminase (TA), L-alanine dehydrogenase (L-AlaDH) and formate dehydrogenase (FDH), starting from 5-hydroxymethylfurfural (HMF). In the cascade, HMF is oxidized into 5-formyl-2-furancarboxylic acid (FFCA) by laccase-TEMPO system, and then the resulting intermediate is converted into AMFC by E. coli_TAF via transamination with cheap ammonium formate instead of costly organic amine donors, theoretically generating H2O and CO2 as by-products. The tandem process was run in a one-pot twostep manner, affording AMFC with approximately 81 % yield, together with 10 % 2,5-furandicarboxylic acid (FDCA) as by-product. In addition, the scale-up production of AMFC was demonstrated, with 0.41 g/L h productivity and 8.6 g/L titer. This work may pave the way for green manufacturing of the furan-containing amino acid.

Exploring the effects of high pressure on hydrogen bonding in pharmaceutical cocrystals: A systematic study of pyridine dicarboxylic acid systems using synchrotron and neutron diffraction

Pharmaceutical cocrystals use common robust hydrogen bonding synthons to create novel materials with different physicochemical properties. In this systematic study of a series of cocrystals, we explore the effect of high pressure on one of these commonly used motifs, the acid-pyridine motif, to assess the commonality of behaviour under extreme conditions. We have surveyed five pyridine dicarboxylic acid systems using both synchrotron and neutron diffraction methods to elucidate the changes in structure. We observe that the hydrogen bonding in these systems compress at a similar rate despite the changes to the molecular make-up of the solids and that on compression the changes in structure are indicative that the layers move along the major slip planes in the structure. We have observed two phase transitions to new forms of the pyrazine:malonic acid system, one for each stoichiometric ratio. This study demonstrates that the combination of two complementary diffraction approaches is key to understanding polymorphic behaviour at high pressure.

Tricyclic Diester and 2,5-Furandicarboxylic Acid for the Synthesis of Biobased Hydrolysis Copolyesters with High Glass Transition Temperatures

The reluctance of a polyester with high glass transition temperature (Tg) and mechanical properties to hydrolyze is a well-known fact, for instance, the high hydrolysis resistance of aromatic polyesters based on terephthalic acid and 2,5-furandicarboxylic acid (FDCA). The synthesis of polyesters that have a high Tg (>100 °C) and a fast hydrolytic degradation quality at the same time is a valuable topic. Herein, a renewable rigid diester, N,N'-trans-1,4-cyclohexane-bis(pyrrolidone-4-methyl carboxylate) (CBPC), was obtained via Michael addition. CBPC was copolymerized with FDCA and ethylene glycol to prepare a series of copolyesters PECxEFy with a high Mn over 30 kDa. PECxEFy showed a Tg range of 75.2-109.2 °C which outdistanced the most biobased polyesters. The thermal stability of all PECxEFy remained unchanged with the introduction of CBPC. Moreover, PECxEFy presented superior mechanical performances which were matching or exceeding those of commercial polyethylene terephthalate (PET) and polylactic acid (PLA). PECxEFy was stable in air but was able to undergo noticeable hydrolytic degradation, proving their enhanced degradability. And the regulation between CBPC and FDCA composition can be leveraged to adjust the degradation and environmental durability of PECxEFy, up to practical applications. Computational studies systematically revealed the relationship between CBPC with a tricyclic structure and the improved Tg and hydrolyzation properties. The outstanding thermal and mechanical performances and hydrolysis of these copolyesters appear to be promising candidates for renewable alternatives to industrial petrochemical polyesters.

Impact of pH on Gas-Particle Partitioning of Semi-Volatile Organics in Multicomponent Aerosol

The partitioning of semivolatile organic compounds (SVOCs) between the condensed and gas phases can have significant implications for the properties of aerosol particles. In addition to affecting size and composition, this partitioning can alter radiative properties and impact cloud activation processes. We present measurements and model predictions on how activity and pH influence the evaporation of SVOCs from particles to the gas phase, specifically investigating aqueous inorganic particles containing dicarboxylic acids (DCAs). The aerosols are studied at the single-particle level by using optical trapping and cavity-enhanced Raman spectroscopy. Optical resonances in the spectra enable precise size tracking, while vibrational bands allow real-time monitoring of pH. Results are compared to a Maxwell-type model that accounts for volatile and nonvolatile solutes in aqueous droplets that are held at a constant relative humidity. The aerosol inorganic-organic mixture functional group activity coefficients thermodynamic model and Debye-Hückel theory are both used to calculate the activities of the species present in the droplet. For DCAs, we find that the evaporation rate is highly sensitive to the particle pH. For acidity changes of approximately 1.5 pH units, we observe a shift from a volatile system to one that is completely nonvolatile. We also observe that the pH itself is not constant during evaporation; it increases as DCAs evaporate, slowing the rate of evaporation until it eventually ceases. Whether a DCA evaporates or remains a stable component of the droplet is determined by the difference between the lowest pKa of the DCA and the pH of the droplet.

The Formulation and Evaluation of Deep Eutectic Vehicles for the Topical Delivery of Azelaic Acid for Acne Treatment

The current work was aimed at the development of a topical drug delivery system for azelaic acid (AzA) for acne treatment. The systems tested for this purpose were deep eutectic systems (DESs) prepared from choline chloride (CC), malonic acid (MA), and PEG 400. Three CC to MA and eight different MA: CC: PEG400 ratios were tested. The physical appearance of the tested formulations ranged from solid and liquid to semisolid. Only those that showed liquid formulations of suitable viscosity were considered for further investigations. A eutectic mixture made from MA: CC: PEG400 1:1:6 (MCP 116) showed the best characteristics in terms of viscosity, contact angle, spreadability, partition coefficient, and in vitro diffusion. Moreover, the MCP116 showed close rheological properties to the commercially available market lead acne treatment product (Skinorin®). In addition, the formula showed synergistic antibacterial activity between the MA moiety of the DES and the AzA. In vitro diffusion studies using polyamide membranes demonstrated superior diffusion of MCP116 over the pure drug and the commercial product. No signs of skin irritation and edema were observed when MCP116 was applied to rabbit skin. Additionally, the MCP116 was found to be, physically and chemically, highly stable at 4, 25, and 40 °C for a one-month stability study.

Engineering a Carboxyl Methyltransferase for the Formation of a Furan-Based Bioplastic Precursor

FtpM from Aspergillus fumigatus was the first carboxyl methyltransferase reported to catalyse the dimethylation of dicarboxylic acids. Here the creation of mutant R166M that can catalyse the quantitative conversion of bio-derived 2,5-furandicarboxylic acid (FDCA) to its dimethyl ester (FDME), a bioplastics precursor, was reported. Wild type FtpM gave low conversion due to its reduced catalytic efficiency for the second methylation step. An AlphaFold 2 model revealed a highly electropositive active site, due to the presence of 4 arginine residues, postulated to favour the binding of the dicarboxylic acid over the intermediate monoester. The R166M mutation improved both binding and turnover of the monoester to permit near quantitative conversion to the target dimethyl ester product. The mutant also had improved activity for other diacids and a range of monoacids. R166M was incorporated into 2 multienzyme cascades for the synthesis of the bioplastics precursor FDME from bioderived 5-hydroxymethylfurfural (HMF) as well as from poly(ethylene furanoate) (PEF) plastic, demonstrating the potential to recycle waste plastic.

Preparation and Physiochemical Analysis of Novel Ciprofloxacin / Dicarboxylic Acid Salts

The crystal structures of four novel dicarboxylic acid salts of ciprofloxacin (CFX) with modified physicochemical properties, prepared by mechanochemical synthesis and solvent crystallization, are reported. A series of dicarboxylic acids of increasing molecular weight was chosen, predicted to interact via a carboxylic acid:secondary amine synthon. These were succinic (SA), glutaric (GA), adipic (AA) and pimelic (PA) acids (4, 5, 6, 7 carbon atoms respectively). Characterized by single crystal and powder X-ray diffraction, Fourier-Transform Infrared Spectroscopy, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy and aqueous solubility measurements, these salts showed distinct physicochemical properties relative to ciprofloxacin base. Searches of the Cambridge Structural Database (CSD) confirmed CFX-SA, CFX-GA, CFX-AA and CFX-PA to be novel crystal structures. Furthermore, the GA salt has substantially higher solubility than the widely available hydrochloride monohydrate salt (CFX-HCl·H₂O). CFX-SA, CFX-GA and CFX-AA showed minimum inhibitory concentration (MIC) of 0.008 g/L and CFX-PA showed MIC of 0.004 g/L. The prepared CFX salts retained antibacterial activity exhibiting equivalent antimicrobial activity to CFX-HCl·H₂O. These salts have positive implications for increasing the application of CFX beyond conventional oral formulations and highlight mechanochemical activation as suitable production method.

Bio-based poly(hexamethylene 2,5-furandicarboxylate-co-2,6-naphthalate) copolyesters: a study of thermal, mechanical, and gas-barrier properties

A series of poly(hexamethylene 2,5-furandicarboxylate-co-2,6-naphthalate) copolyesters were synthesized using various amounts of poly(hexylene 2,5-furandicarboxylate) (PHF) and poly(hexylene 2,6-naphthalate) (PHN) via melt polymerization. The effects of introducing 2,6-naphthalene dicarboxylic acid (NDCA) on the thermal, mechanical, and gas-barrier properties were investigated. When the NDCA content was less than 30 mol%, the temperatures of crystallization (T_c) and melting (T_m) decreased as the amount of NDCA was increased owing to disturbance of the polymer-chain regularity. When the NDCA content was above 50 mol%, the T_c and T_m of the materials increased as the NDCA content was increased, showing that the dominant crystallization behavior varied from 2,5-furandicarboxylic acid to NDCA. Hence, the glass transition temperature (T_g) increased as the NDCA content was increased, which was attributed to the incorporation of NDCA with a more rigid naphthalate structure compared with the furan ring. The gas-barrier properties of the samples were observed to improve with the introduction of NDCA; this tendency could be explained by the β-relaxation behavior and free volume values of the samples in the amorphous state. The activation energy (E_a) of β-relaxation increased with the NDCA content, indicating that higher amounts of energy were needed to trigger the onset of long-range molecular motions. Free-volume calculations of the polymer structure showed that the introduction of NDCA hindered the space for gas penetration. For these reasons, the gas-barrier properties were improved and evaluated.

Displacement of Strong Acids or Bases by Weak Acids or Bases in Aerosols: Thermodynamics and Kinetics

Depletion of chloride, nitrate, or ammonium from atmospheric aerosols represents a unique class of displacement reactions in which strong acids (HCl and HNO₃) or bases (NH₃) are substituted by weaker ones (i.e., dicarboxylic acids or dicarboxylate salts, respectively). These reactions alter the aerosol composition and perturb the atmospheric cycle of volatile compounds, thereby affecting environmental systems and climate. Despite the profound implications, the mechanism of these unique displacement reactions remains unclear. Here, we elucidate the thermodynamics and kinetics of these reactions using the multiphase buffer theory and a diffusion-controlled mass-transfer function, respectively. On the thermodynamic aspect, we find that the effective dissociation constants of the strong acids and bases in aerosols are 2 to 10 orders of magnitude lower than those in bulk solutions. On the kinetic aspect, we find that displacement reactions occur rapidly in aerosol microdroplets with a radius below 10 μm. Within this size range, the characteristic reaction time is always shorter than the lifetime of the aerosols in the atmosphere. Our findings suggest that the unique displacement reactions can significantly modify the composition of atmospheric aerosols, and consequentially, these aerosols may manifest distinct properties unforeseen by the chemistry of homogeneous bulk systems.

Alloy-Driven Efficient Electrocatalytic Oxidation of Biomass-Derived 5-Hydroxymethylfurfural towards 2,5-Furandicarboxylic Acid: A Review

In recent years, electrocatalysis was progressively developed to facilitate the selective oxidation of biomass-derived 5-hydroxymethylfurfural (HMF) towards the value-added chemical 2,5-furandicarboxylic acid (FDCA). Among reported electrocatalysts, alloy materials have demonstrated superior electrocatalytic properties due to their tunable electronic and geometric properties. However, a specific discussion of the potential impacts of alloy structures on the electrocatalytic HMF oxidation performance has not yet been presented in available Reviews. In this regard, this Review introduces the most recent perspectives on the alloy-driven electrocatalysis for HMF oxidation towards FDCA, including oxidation mechanism, alloy nanostructure modulation, and external conditions control. Particularly, modulation strategies for electronic and geometric structures of alloy electrocatalysts have been discussed. Challenges and suggestions are also provided for the rational design of alloy electrocatalysts. The viewpoints presented herein are anticipated to potentially contribute to a further development of alloy-driven electrocatalytic oxidation of HMF towards FDCA and to help boost a more sustainable and efficient biomass refining system.

Building Flexible Escherichia coli Modules for Bifunctionalizing n-Octanol: The Byproduct of Oleic Acid Biorefinery

Artificial biorefinery of oleic acid into 1,10-decanedioic acid represents a revolutionizing route to the sustainable production of chemically difficult-to-make bifunctional chemicals. However, the carbon atom economy is extremely low (56%) due to the formation of unifunctional n-octanol. Here, we report a panel of recombinant Escherichia coli modules for diverse bifunctionalization, where the desired genetic parts are well distributed into different modules that can be flexibly combined in a plug-and-play manner. The designed ω-functionalizing modules could achieve ω-hydroxylation, consecutive ω-oxidation, or ω-amination of n-octanoic acid. By integrating these advanced modules with the reported oleic acid-cleaving modules, high-value C8 and C10 products, including ω-hydroxy acid, ω-amino acid, and α,ω-dicarboxylic acid, were produced with 100% carbon atom economy. These ω-functionalizing modules enabled the complete use of all of the carbon atoms from oleic acid (released from plant oil) for the green synthesis of structurally diverse bifunctional chemicals.

Base-Free Aerobic Oxidation of Furfuralcohols and Furfurals to Furancarboxylic Acids over Nitrogen-Doped Carbon-Supported AuPd Bowl-Like Catalyst

Upgrading furfuralcohols and furfurals to furancarboxylic acids is of great significance for high value-added downstream chemicals synthesis and biomass conversion. Developing an efficient catalyst is the key to acquiring a completely sustainable process. Herein, nitrogen-doped carbon-supported bimetallic AuPd bowl-like catalysts were synthesized. The surface wettability of nitrogen-doped carbon was well adjusted by the nitrification process. Benefiting from the alloying effect of bimetallic AuPd catalyst and the formation of hydroxyl radical initiated by H₂ O dissociation on the hydrophilic surface of nitrated nitrogen-doped carbon, base-free aerobic oxidation of 5-hydroxymethylfurfural (HMF) could produce the highest 2,5-furandicarboxylic acid (FDCA) yield of 93.9 %. In-situ infrared spectroscopy uncovered adsorption configuration of HMF, and the nitrated carbon surface was favorable for HMF and intermediates to enter the active sites, greatly promoting the catalytic oxidation process. Employing other furfuralcohols (furfuryl alcohol, furan-2,5-diyldimethanol, 2,5-bishydroxymethylfuran) as well as furfural and 5-methylfurfural as starting materials, 35.6-95.4 % yield of furancarboxylic acids (FDCA, 2-furoic acid, 5-methyl-2-furoic acid) were also obtained. Moreover, the developed catalysts could maintain excellent stability and activity after four successive runs. This deep insight into the role of bimetallic synergy and surface wettability provides a basis for the rational design of the highly efficient catalysts for the oxidation of furfuralcohols and furfurals and related reactions.

Conductive Metal-Organic Frameworks Bearing M-O4 Active Sites as Highly Active Biomass Valorization Electrocatalysts

The electrochemical oxidation of the biomass platform 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA), is an important reaction in the emerging area of renewable energy-powered biomass valorization. A key limitation in this field is the ill-defined nature of the catalytic sites of the highest-performing materials that limits the fundamental insights that can be extracted. To this end, a conductive metal-organic framework-based electrocatalytic model system with well-defined M-O₄ active sites for electrochemical HMF oxidation was developed. These materials were found to be highly active towards FDCA generation, with product yields of over 95 %. In parallel, infrared spectroscopy was employed to capture a surface-bound aldehyde group as the key intermediate in the catalytic cycle, which forms once M(II/III) oxidation occurs. This work illustrates the advantage of utilizing molecularly defined active sites coupled with operando spectroscopy to provide fundamental insights into a variety of electrosynthetic reactions and thus paves the way for future catalyst design.

Electrochemical Oxidation of HMF via Hydrogen Atom Transfer and Hydride Transfer on NiOOH and the Impact of NiOOH Composition

A great deal of attention has been directed toward studying the electrochemical oxidation of 5-hydroxymethylfurfural (HMF), a molecule that can be obtained from biomass-derived cellulose and hemicellulose, to 2,5-furandicarboxylic acid (FDCA), a molecule that can replace the petroleum-derived terephthalic acid in the production of widely used polymers such as polyethylene terephthalate. NiOOH is one of the best and most well studied electrocatalysts for achieving this transformation; however, the mechanism by which it does so is still poorly understood. This study quantitatively examines how two different dehydrogenation mechanisms on NiOOH impact the oxidation of HMF and its oxidation intermediates on the way to FDCA. The first mechanism is a well-established indirect oxidation mechanism featuring chemical hydrogen atom transfer to Ni³⁺ sites while the second mechanism is a newly discovered potential-dependent (PD) oxidation mechanism involving electrochemically induced hydride transfer to Ni⁴⁺ sites. The composition of NiOOH was also tuned to shift the potential of the Ni(OH)₂ /NiOOH redox couple and to investigate how this affects the rates of indirect and PD oxidation as well as intermediate accumulation during a constant potential electrolysis. The new insights gained by this study will allow for the rational design of more efficient electrochemical dehydrogenation catalysts.

Challenges of Green Production of 2,5-Furandicarboxylic Acid from Bio-Derived 5-Hydroxymethylfurfural: Overcoming Deactivation by Concomitant Amino Acids

The oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) is highly attractive as FDCA is considered as substitute for the petrochemically derived terephthalic acid. There are only few reports on the direct use of unrefined HMF solutions from biomass resources and the influence of remaining constituents on the catalytic processes. In this work, the oxidation of HMF in a solution as obtained from hydrolysis and dehydration of saccharides in chicory roots was investigated without intermediate purification steps. The amount of base added to the solution was critical to increase the FDCA yield. Catalyst deactivation occurred and was attributed to poisoning by amino acids from the bio-source. A strong influence of amino acids on the catalytic activity was found for all supported Au, Pt, Pd, and Ru catalysts. A supported AuPd(2 : 1)/C alloy catalyst exhibited both superior catalytic activity and higher stability against deactivation by the critical amino acids.

Crystal Faces-Tailored Oxygen Vacancy in Au/CeO2 Catalysts for Efficient Oxidation of HMF to FDCA

Developing an efficient catalyst to upgrade 5-hydroxymethylfurfural (HMF) to high-value-added downstream chemicals is of great significance in biomass conversion. Nanorod (110)-, nanocube (100)-, and nanooctaheron (111)-CeO₂ -supported Au nanoparticles were prepared to investigate the intrinsic effect of CeO₂ crystal faces on the oxidation of HMF to 2,5-furandicarboxylic acid (FDCA). The experimental results and density functional theory calculation revealed that the concentration of oxygen vacancy (V_O ) for exposed specific crystal faces was crucial to the oxygen adsorption ability, and Au/nanorod-CeO₂ with the highest V_O concentration promoted the formation of more oxygen active species (superoxide radical) on CeO₂ (110) crystal face than (100) and (111) crystal faces. Besides, the higher V_O concentration could provide a strong adsorption ability of HMF, greatly boosting the activation of HMF. Thus, these results led to a superior catalytic activity for HMF oxidation over Au/nanorod-CeO₂ (FDCA yield of 96.5 %). In-situ Fourier-transform (FT)IR spectroscopy uncovered the HMF oxidation pathway, and the possible catalytic mechanism was proposed. The deep insight into the role of regulation for crystal faces provides a basis for the rational design of highly active facets for the oxidation of HMF and related reactions.

Electro- and Photocatalytic Oxidative Upgrading of Bio-based 5-Hydroxymethylfurfural

Conversion of biomass into biofuels and high value-added chemicals is a promising strategy to solve the increasingly deteriorating environmental problems caused by fossil energy consumption. The development of efficient technologies and methods is the premise and guarantee to realize the high-value conversion of biomass. 5-Hydroxymethylfurfural (HMF), as a versatile biomass platform compound, is generated via dehydration of hexoses (e. g., fructose and glucose) derived from cellulosic biomass. This Review gives an overview of the advances and challenges of electro- and photocatalytic oxidation of biomass-derived HMF to high-value chemicals such as 2,5-formylfuran (DFF) and 2,5-furandicarboxylic acid (FDCA). These strategies and methods for the preparation of high-value chemicals by electro- and photocatalytic oxidation of HMF, coupled with, for example, hydrogen evolution reaction, organic substrate reduction, CO₂ reduction reaction, or N₂ reduction reaction, were summarized and discussed. Moreover, the catalytic efficiency and mechanism of different types of catalysts were also introduced in these conversion systems.

Molecular Dynamics Study of the Photodegradation of Polymeric Chains

The development of reusable polymeric materials inspires an attempt to combine renewable biomass with upcycling to form a biorenewable closed system. It has been reported that 2,5-furandicarboxylic acid (FDCA) can be recovered for recycling when incorporated as monomers into photodegradable polymeric systems. Here, we conduct density functional theory (DFT) studies with periodic boundary conditions on microscopic structures involved in the photodegradation of polymeric chains incorporating FDCA and 2-nitro-1,3-benzenedimethanol. The photodegradation process of polymeric chains is studied using time-dependent excited-state molecular dynamics (TDESMD) in vacuum and aqueous environments. Changes in the photophysical properties for reaction intermediates are characterized by ground-state observables. The distribution of reaction intermediates and products is obtained from TDESMD trajectories using cheminformatics techniques. Results show that a higher degree of polymeric chain degradation is achieved in the vacuum environment. Additionally, one finds that the FDCA molecule is recoverable in the aqueous environment, in qualitative agreement with experimental findings.

Nickel(II) Coordination Polymers Supported by Bis-pyridyl-bis-amide and Angular Dicarboxylate Ligands: Role of Ligand Flexibility in Iodine Adsorption

Reactions of N‚N’-bis(3-pyridylmethyl)oxalamide (L¹), N‚N’-bis(4-pyridylmethyl)oxalamide (L²), or N,N’-bis(3-pyridylmethyl)adipoamide) (L³) with angular dicarboxylic acids and Ni(II) salts under hydro(solvo)thermal conditions afforded a series of coordination polymers: {[Ni(L¹)(OBA)(H₂O)]·H₂O}_n (H₂OBA = 4,4-oxydibenzoic acid), 1, {[Ni(L¹)(SDA)(H₂O)₂]·H₂O·CH₃OH}_n (H₂SDA = 4,4-sulfonyldibenzoic acid), 2, {[Ni(L²)(OBA)]·C₂H₅OH}_n, 3, {[Ni(L²)(OBA)]·CH₃OH}_n, 4, {[Ni₂(L²)(SDA)₂(H₂O)₃]·5H₂O}_n, 5, {[Ni₂(L²)(SDA)₂(H₂O)₃]·H₂O·2C₂H₅OH}_n, 6, {[Ni(L³)(OBA)(H₂O)₂]·2H₂O}_n, 7, {[Ni(L³)(SDA)(H₂O)₂]·2H₂O}_n, 8, and {[Ni(L³)₀.₅(SDA)(H₂O)₂]·0.5C₂H₅OH}_n, 9, which have been structurally characterized by using single-crystal X-ray crystallography. Complex 1 exhibits an interdigitated 2D layer with the 2,4L2 topology and 2 is a 2D layer with the sql topology, while 3 and 4 are 3D frameworks resulting from polycatenated 2D nets with the sql topology and 5 and 6 are 2-fold interpenetrated 3D frameworks with the dia topology. Complexes 7 and 8 are 1D looped chains and 9 is a 2D layer with the 3,4L13 topology. The various structural types in 1–9 indicate that the structural diversity is subject to the flexibility and donor atom position of the neutral spacer ligands and the identity of the angular dicarboxylate ligands, while the role of the solvent is uncertain. The iodine adsorption of 1–9 was also investigated, demonstrating that that the flexibility of the spacer L¹–L³ ligands can be an important factor that governs the feasibility of the iodine adsorption. Moreover, complex 9 shows a better iodine adsorption and encapsulates 166.55 mg g⁻¹ iodine in the vapor phase at 60 °C, which corresponded to 0.38 molecules of iodine per formula unit.

Quinazoline-containing Hydrazydes of Dicarboxylic Acids and Products of Their Structural Modification: A Novel Class of Anti-inflammatory Agents

The synthesis of hydrazides formed by quinazolin-4(3H)-ylidenehydrazine and dicarboxylic acids, as well as their further modification are described in the present manuscript. It was shown that above-mentioned hydrazides may be obtained via acylation of initial quinazolin-4(3H)-ylidenehydrazine by corresponding acylhalides, cyclic anhydrides and imidazolides of dicarboxylic acids monoesters. Obtained hydrazides were converted into [1,2,4]triazolo[1,5-c]quinazolines that were used as initial compounds for chemical modification aimed to the introduction of amide fragment to the molecule. The IR, 1H NMR and chromato-mass spectral data of obtained compounds were studied and discussed. Obtained substances were studied for anti-inflammatory activity using carrageenan-induced paw inflammation model. Amides of ([1,2,4]triazolo[1,5-c]quinazoline-2-yl)alkyl carboxylic acids were detected as promising class of anti-inflammatory agents for further purposeful synthesis and profound study of anti-inflammatory activity.

Light-Driven Enzymatic Decarboxylation of Dicarboxylic Acids

Photodecarboxylase from Chlorella variabillis (CvFAP) is one of the three known light-activated enzymes that catalyzes the decarboxylation of fatty acids into the corresponding C1-shortened alkanes. Although the substrate scope of CvFAP has been altered by protein engineering and decoy molecules, it is still limited to mono-fatty acids. Our studies demonstrate for the first time that long chain dicarboxylic acids can be converted by CvFAP. Notably, the conversion of dicarboxylic acids to alkanes still represents a chemically very challenging reaction. Herein, the light-driven enzymatic decarboxylation of dicarboxylic acids to the corresponding (C2-shortened) alkanes using CvFAP is described. A series of dicarboxylic acids is decarboxylated into alkanes in good yields by means of this approach, even for the preparative scales. Reaction pathway studies show that mono-fatty acids are formed as the intermediate products before the final release of C2-shortened alkanes. In addition, the thermostability, storage stability, and recyclability of CvFAP for decarboxylation of dicarboxylic acids are well evaluated. These results represent an advancement over the current state-of-the-art.

Oligosaccharide Antigen Conjugation to Carrier Proteins to Formulate Glycoconjugate Vaccines

Conjugation, that is, covalent linkage, to immunological proteins is a common strategy to address the low immunogenicity issue of carbohydrate antigens in vaccine development. This chapter describes an easy and efficient method for oligosaccharide-protein conjugation employing dicarboxylic acid linkers. In this regard, a free amino group is introduced to an oligosaccharide antigen to facilitate coupling with the bifunctional linker upon reaction with its corresponding disuccinimidyl ester. The resultant monosuccinimidyl ester of the oligosaccharide antigen then reacts with the free amino groups of a carrier protein to provide the desired oligosaccharide-protein conjugate.

Structural Insights into New Bi(III) Coordination Polymers with Pyridine-2,3-Dicarboxylic Acid: Photoluminescence Properties and Anti-Helicobacter pylori Activity

Two novel coordination polymers, [Bi2(2,3pydc)2(2,3pydcH)2(H2O)]n (1) and {(Et3NH)2[Bi(2,3pydc)(2,3pydcH)Cl2]}n (2) were prepared using as a prolinker pyridine-2,3-dicarboxylic acid (2,3pydcH2). The obtained complexes were fully characterized by elemental analysis, TG/DTG, FT-IR, solid-state photoluminescence, DFT calculations and single-crystal X-ray diffraction. The obtained complexes crystallized in the triclinic P-1 space group (1) and comprise dimeric units with two crystallographically different Bi(III) centers (polyhedra: distorted pentagonal bipyramid and bicapped trigonal prism) and monoclinic P21/c space group (2) with a distorted monocapped pentagonal bipyramid of Bi(III) center. The various coordination modes of bridging carboxylate ligands are responsible for the formation of 1D chains with 4,5C10 (1) and 2C1 (2) topology. The photoluminescence quantum yield for polymer 2 is 8.36%, which makes it a good candidate for more specific studies towards Bi-based fluorescent materials. Moreover, it was detected that polymer 1 is more than twice as active against H. pylori as polymer 2. It can be concluded that there is an existing relationship between the structure and the antibacterial activity because the presence of chloride and triethylammonium ions in the structure of complex 2 reduces the antibacterial activity.

Chelation Crosslinking of Biodegradable Elastomers

Widely present in nature and in manufactured goods, elastomers are network polymers typically crosslinked by strong covalent bonds. Elastomers crosslinked by weak bonds usually exhibit more plastic deformation. Here, chelation as a mechanism to produce biodegradable elastomers is reported. Polycondensation of sebacic acid, 1,3-propanediol, and a Schiff-base (2-[[(2-hydroxyphenyl) methylene]amino]-1,3-propanediol) forms a block copolymer that binds several biologically relevant metal ions. Chelation offers a unique advantage unseen in conventional elastomer design because one ligand binds multiple metal ions, yielding bonds of different strengths. Therefore, one polymeric ligand coordinated with different metal ions produces elastomers with vastly different characteristics. Mixing different metal ions in one polymer offers another degree of control on material properties. The density of the ligands in the block copolymer further regulates the mechanical properties. Moreover, a murine model reveals that Fe³⁺ crosslinked foam displays higher compatibility with subcutaneous tissues than the widely used biomaterial-polycaprolactone. The implantation sites restore to their normal architecture with little fibrosis upon degradation of the implants. The versatility of chelation-based design has already shown promise in hydrogels and highly stretchy nondegradable polymers. The biodegradable elastomers reported here would enable new materials and new possibilities in biomedicine and beyond.

Increased Production of ω-Hydroxynonanoic Acid and α,ω-Nonanedioic Acid from Olive Oil by a Constructed Biocatalytic System

ω-Hydroxynonanoic acid and α,ω-nonanedioic acid are used for synthesizing diverse chemicals. Although biological methods are developed, their concentrations are low due to the toxicity of high concentrations of the hydrophobic chemicals toward biocatalysts. Here, we constructed a biocatalytic system with high productivity by adding an adsorbent resin and a strong base anion-exchange resin, reducing the solubility of ω-hydroxynonanoic acid and α,ω-nonanedioic acid, feeding ω-hydroxynonanoic acid, and introducing a cofactor regeneration system. The constructed biocatalytic system converted 300 mM (83.9 g L^-1) and 154 mM (43.5 g L^-1) oleic acid in the olive oil hydrolysate obtained after resin extraction, which were derived from 110 and 54 g L^-1 olive oil, respectively, into 202 mM (35.2 g L^-1) ω-hydroxynonanoic acid and 103 mM (19.4 g L^-1) α,ω-nonanedioic acid, which are 21- and 24-fold higher values than the previously reported results, respectively. This study may contribute to the industrial biosynthesis of ω-hydroxynonanoic acid and α,ω-nonanedioic acid from olive oil.

Improved HPLC Conditions to Determine Eumelanin and Pheomelanin Contents in Biological Samples Using an Ion Pair Reagent

Alkaline hydrogen peroxide oxidation (AHPO) of eumelanin and pheomelanin, two major classes of melanin pigments, affords pyrrole-2,3,5-tricarboxylic acid (PTCA), pyrrole-2,3-dicarboxylic acid (PDCA) and pyrrole-2,3,4,5-tetracarboxylic acid (PTeCA) from eumelanin and thiazole-2,4,5-tricarboxylic acid (TTCA) and thiazole-4,5-dicarboxylic acid (TDCA) from pheomelanin. Quantification of these five markers by HPLC provides useful information on the quantity and structural diversity of melanins in various biological samples. HPLC analysis of these markers using the original method of 0.1 M potassium phosphate buffer (pH 2.1):methanol = 99:1 (85:15 for PTeCA) on a reversed-phase column had some problems, including the short lifetime of the column and, except for the major eumelanin marker PTCA, other markers were occasionally overlapped by interfering peaks in samples containing only trace levels of these markers. These problems can be overcome by the addition of an ion pair reagent for anions, such as tetra-n-butylammonium bromide (1 mM), to retard the elution of di-, tri- and tetra-carboxylic acids. The methanol concentration was increased to 17% (30% for PTeCA) and the linearity, reproducibility, and recovery of the markers with this improved method is good to excellent. This improved HPLC method was compared to the original method using synthetic melanins, mouse hair, human hair, and human epidermal samples. In addition to PTCA, TTCA, a major marker for pheomelanin, showed excellent correlations between both HPLC methods. The other markers showed an attenuation of the interfering peaks with the improved method. We recommend this improved HPLC method for the quantitative analysis of melanin markers following AHPO because of its simplicity, accuracy, and reproducibility.

Preparation of a new magnetic ion-imprinted polymer and optimization using Box-Behnken design for selective removal and determination of Cu(II) in food and wastewater samples

A new magnetic Cu(II) IIP (Fe₃O₄@IIP-IDC) is synthesized by polymerization of Imidazole-4,5-dicarboxylic acid functionalized Allyl chloride, and significant improvement of its performance has been compared. SPE parameters were optimized using Box-Behnken design to achieve the twin objectives of quantitative determination and removal of Cu(II). FLPSO kinetic model and BS isotherm model fits well with the capacity of 175 mg g^-1. Analytical figures of merit includes a linearity range of 10-5,000 µg L^-1 (R² = 0.9986), preconcentration factor of 50 after eluting with 5 mL of 1 M HNO₃, LOD of 1.03 µg L^-1 and LOQ of 4.5 µg L^-1. Accuracy was assessed by analysis of SRM (Standard Reference Material) and recovery experiments after spiking in food samples (Tea, coffee, chocolate, spinach, infant milk substitute) and battery wastewater. Ease of use, reusability (15 cycles), rapid adsorption and high selectivity makes it a promising candidate for efficient and selective removal and trace determination.

New Dihydroxytyrosyl Esters from Dicarboxylic Acids: Synthesis and Evaluation of the Antioxidant Activity In Vitro (ABTS) and in Cell-Cultures (DCF Assay)

New dihydroxytyrosyl esters 2a, 2c–2j of dicarboxylic acids were synthesized from methyl orthoformate protected hydroxytyrosol 3 and diacyl chlorides. New compounds were characterized (HRMS, FT-IR, ¹H- and ¹³C-NMR), and tested for antioxidant activity both in vitro (ABTS) and on L6 myoblasts and THP1 leukemic monocytes cell culture by DCF assay. According to the ABTS assay, compounds 2a, 2c–2j showed a TEAC value of antioxidant capacity up to twice that of Trolox. Very high or complete ROS protections were obtained in the cell environment where lipophilicity and rigidity of dicarboxylic structure seem to facilitate the antioxidant effect. MTT assay and proliferation test were used for assessment of cell viability. These compounds can be envisaged as a new class of preservatives for food or cosmetic products.

Investigation into the influence of an acrylic acid acceptor in organic D-π-A sensitizers against phototoxicity

Photodynamic therapy (PDT) is a non-invasive, selective, and cost-effective cancer therapy. We previously reported that thiophene-based organic D-π-A sensitizers consist of an electron-donating (D) moiety, a π-conjugated bridge (π) moiety, and an electron-accepting (A) moiety, and are readily accessible and stable templates for photosensitizers that could be used in PDT. In addition, acrylic acid acceptor-containing photosensitizers exert a high level of phototoxicity. This study was an investigation into 1) the possibility of increasing phototoxicity by introducing another carboxyl group or by replacing a carboxyl group with a pyridinium group, and 2) the importance of an alkene in the acrylic acid acceptor for phototoxicity. A review of the design, synthesis, and evaluation of sensitizers revealed that neither dicarboxylic acid nor pyridinium photosensitizers enhance phototoxicity. An evaluation of a photosensitizer without an alkene in the acrylic acid moiety revealed that the alkene was not indispensable in the pursuit of phototoxicity. The obtained results provided new insight into the design of ideal D-π-A photosensitizers for PDT.

Selective adsorption mechanisms of pharmaceuticals on benzene-1,4-dicarboxylic acid-based MOFs: Effects of a flexible framework, adsorptive interactions and the DFT study

The synergetic effects of benzene-1,4-dicarboxylic acid (BDC) linker structure and the metal cluster of MOFs on adsorption mechanisms of carbamazepine, ciprofloxacin and mefenamic acid were investigated in single and mixed solutions. A 1D flexible framework MIL-53(Al), 3D rigid framework UiO-66(Zr) and 3D flexible framework MIL-88B(Fe) were applied as adsorbents. The breathing effect of MIL-53(Al) caused by its flexible structure can enhance intraparticle diffusion for all pharmaceuticals and perform a critical role in excellent adsorption performances. The 3D rigid BDC structure of UiO-66(Zr) caused a steric effect that reflected low or negligible adsorption. Unless concerning accessibility through the internal structure of the MOFs, the binding strengths calculated by the DFT study were in the following order: MIL-88B(Fe) > MIL-53(Al) > UiO-66(Zr). The Fe cluster in MIL-88B(Fe) seems to have the highest affinity for the carboxylic group of pharmaceuticals compared with Al and Zr; however, the lower porosity of MIL-88B(Fe) might limit the adsorption capacity. Moreover, in mixed solutions, the higher acidity of mefenamic acid can enhance competitive performance in interactions with the metal cation cluster of each MOF. Together with the breathing effect, H-bonding and π-π interaction were shown to be the alternative interactions of synergetic adsorption mechanisms.

Synthesis, Crystal Structures and Luminescence Properties of Three New Cadmium 3D Coordination Polymers

The new rigid planar ligand 2,5-bis(3-(pyridine-4-yl)phenyl)thiazolo[5,4-d]thiazole (BPPT) has been synthesized, which is an excellent building block for assembling coordination polymer. Under solvothermal reaction conditions, cadmium ion with BPPT in the presence of various carboxylic acids including (1,1′-biphenyl)-4,4′-dicarboxylic acid (BPDC), isophthalic acid (IP), and benzene-1,3,5-tricarboxylic acid (BTC) gave rise to three coordination complexes, viz, [Cd(BPPT)(BPDA)](BPPT)n (1), [Cd(BPPT) (IP)] (CH₃OH) (2), and [Cd₃(BPPT)₃(BTC)₂(H₂O)₂] (3). The structures of 1, 2, and 3 were characterized by single crystal X-ray diffraction. The IR spectra as well as thermogravimetric and luminescence properties were also investigated. Complex 1 is a two-dimensional (2D) network and further stretched to a 3D supramolecular structure through π–π stacking interaction. The complexes 2 and 3 show 3D framework. The complexes 1, 2, and 3 exhibited luminescence property at room temperature.

Assessment of the Pharmacological Properties and Phytochemical Profile of Bruguiera gymnorhiza (L.) Lam Using in Vitro Studies, in Silico Docking, and Multivariate Analysis

Bruguiera gymnorhiza (L.) Lam. is claimed to effectively manage a number of ailments including diabetes and associated complications. Nonetheless, no attempt has been made to delineate its pharmacological propensities and phytochemical profile. This study was designed to appraise the antioxidant and enzymatic inhibitory properties relevant to the management of diabetes mellitus, obesity, and neurodegenerative and skin disorders. A combination of colorimetric assays and ultra-high-performance liquid chromatography/electrospray ionization tandem mass spectrometry (UHPLC-ESI-MS/MS) were applied for the phytochemical screening of leaf, root, twig, and fruit extracts (methanol and ethyl acetate). In vitro antioxidant evaluations were via radical scavenging abilities (DPPH, ABTS), reducing potential (FRAP, CUPRAC), chelating power, and total antioxidant capacity (phosphomolybdenum). Seven key metabolic enzymes (α-amylase, α-glucosidase, tyrosinase, elastase, lipase, AChE, and BChE) were targeted to determine the inhibitory effects. Multivariate and in silico docking analysis were performed on collected data. Methanolic fruit extract yielded the highest total phenolic, tannin, and triterpenoid contents (174.18 ± 4.27 mg GAE/g, 176.24 ± 3.10 mg CE/g, 63.11 ± 3.27 mg OAE/g, respectively); significantly depressed tyrosinase, elastase, and α-amylase activities (155.35 ± 0.29 mg KAE/g, 4.56 ± 0.10 mg CAE/g, 1.00 ± 0.05 mmol ACAE/g, accordingly); and harboured the most potent antioxidant capacities with DPPH, CUPRAC, FRAP (492.62 ± 5.31, 961.46 ± 11.18, 552.49 ± 8.71 mg TE/g, respectively), and phosphomolybdenum (4.17 ± 0.31 mmol TE/g) assays. Multivariate analysis suggested that the type of solvents used influenced the biological activities more compared to plant parts. Docking analysis showed that azelaic acid binds with tyrosinase by Van der Waals and conventional hydrogen bonds. We anticipate that the present study may establish baseline data on this halophyte that could open new avenues for the development of biomedicine.

Urine dicarboxylic acids change in pre-symptomatic Alzheimer's disease and reflect loss of energy capacity and hippocampal volume

Non-invasive biomarkers will enable widespread screening and early diagnosis of Alzheimer’s disease (AD). We hypothesized that the considerable loss of brain tissue in AD will result in detection of brain lipid components in urine, and that these will change in concert with CSF and brain biomarkers of AD. We examined urine dicarboxylic acids (DCA) of carbon length 3–10 to reflect products of oxidative damage and energy generation or balance that may account for changes in brain function in AD. Mean C4-C5 DCAs were lower and mean C7-C10 DCAs were higher in the urine from AD compared to cognitively healthy (CH) individuals. Moreover, mean C4-C5 DCAs were lower and mean C7-C9 were higher in urine from CH individuals with abnormal compared to normal CSF amyloid and Tau levels; i.e., the apparent urine changes in AD also appeared to be present in CH individuals that have CSF risk factors of early AD pathology. In examining the relationship between urine DCAs and AD biomarkers, we found short chain DCAs positively correlated with CSF Aβ₄₂, while C7-C10 DCAs negatively correlated with CSF Aβ₄₂ and positively correlated with CSF Tau levels. Furthermore, we found a negative correlation of C7-C10 DCAs with hippocampal volume (p < 0.01), which was not found in the occipital volume. Urine measures of DCAs have an 82% ability to predict cognitively healthy participants with normal CSF amyloid/Tau. These data suggest that urine measures of increased lipoxidation and dysfunctional energy balance reflect early AD pathology from brain and CSF biomarkers. Measures of urine DCAs may contribute to personalized healthcare by indicating AD pathology and may be utilized to explore population wellness or monitor the efficacy of therapies in clinical trials.

Synthesis of Novel Structural Hybrids between Aza-Heterocycles and Azelaic Acid Moiety with a Specific Activity on Osteosarcoma Cells

Nine compounds bearing pyridinyl (or piperidinyl, benzimidazolyl, benzotriazolyl) groups bound to an azelayl moiety through an amide bond were synthesized. The structural analogy with some histone deacetylase inhibitors inspired their syntheses, seeking new selective histone deacetylase inhibitors (HDACi). The azelayl moiety recalls part of 9-hydroxystearic acid, a cellular lipid showing antiproliferative activity toward cancer cells with HDAC as a molecular target. Azelayl derivatives bound to a benzothiazolyl moiety further proved to be active as HDACi. The novel compounds were tested on a panel of both normal and tumor cell lines. Non-specific induction of cytotoxicity was observed in the normal cell line, while three of them induced a biological effect only on the osteosarcoma (U2OS) cell line. One of them induced a change in nuclear shape and size. Cell-cycle alterations are associated with post-transcriptional modification of both H2/H3 and H4 histones. In line with recent studies, revealing unexpected HDAC7 function in osteoclasts, molecular docking studies on the active molecules predicted their proneness to interact with HDAC7. By reducing side effects associated with the action of the first-generation inhibitors, the herein reported compounds, thus, sound promising as selective HDACi.

In Vivo Bone Regeneration Induced by a Scaffold of Chitosan/Dicarboxylic Acid Seeded with Human Periodontal Ligament Cells

Chitosan/dicarboxylic acid (CS/DA) scaffold has been developed as a bone tissue engineering material. This study evaluated a CS/DA scaffold with and without seeded primary human periodontal ligament cells (hPDLCs) in its capacity to regenerate bone in calvarial defects of mice. The osteogenic differentiation of hPDLCs was analyzed by bone nodule formation and gene expression. In vivo bone regeneration was analyzed in mice calvarial defects. Eighteen mice were divided into 3 groups: one group with empty defects, one group with defects with CS/DA scaffold, and a group with defects with CS/DA scaffold and with hPDLCs. After 6 and 12 weeks, new bone formation was assessed using microcomputed tomography (Micro-CT) and histology. CS/DA scaffold significantly promoted in vitro osteoblast-related gene expression (RUNX2, OSX, COL1, ALP, and OPN) by hPDLCs. Micro-CT revealed that CS/DA scaffolds significantly promoted in vivo bone regeneration both after 6 and 12 weeks (p < 0.05). Histological examination confirmed these findings. New bone formation was observed in defects with CS/DA scaffold; being similar with and without hPDLCs. CS/DA scaffolds can be used as a bone regenerative material with good osteoinductive/osteoconductive properties.

Preclinical disposition of MGS0274 besylate, a prodrug of a potent group II metabotropic glutamate receptor agonist MGS0008 for the treatment of schizophrenia

MGS0274 besylate is an ester-based lipophilic prodrug of a metabotropic glutamate (mGlu) 2 and mGlu3 receptor agonist MGS0008 and being developed for the treatment of schizophrenia. We investigated the disposition of these compounds in rats and monkeys and in vitro metabolism in humans to evaluate whether MGS0274 besylate could be useful as a prodrug in humans. After the oral administration of MGS0274 besylate to monkeys (2.89 mg/kg), MGS0008 was immediately found in plasma, reached a maximum concentration at 4 hours postdose, and decreased with a terminal half-life of 16.7 hours; MGS0274 was barely detectable. The oral bioavailability as MGS0008 was 83.7%, which was approximately 20-fold greater than that after oral dosing of MGS0008 (3.8%). In rats, MGS0008 penetrated the cerebrospinal fluid and was eliminated slower than from plasma. The in vitro metabolism study indicated that MGS0274 was rapidly hydrolyzed to MGS0008, which was not further metabolized. After the intravenous administration of MGS0008 to rats and monkeys, almost all the dose was excreted unchanged in urine. These results suggested that MGS0274 was, as expected, presystemically hydrolyzed to MGS0008 after gastrointestinal absorption and that MGS0008 was distributed throughout the body without further metabolism and ultimately excreted in urine in the animals. Furthermore, the hydrolytic activity against MGS0274 in the human liver S9 fraction was comparable to that in monkeys, suggesting the possibility of the rapid presystemic hydrolysis of MGS0274 to MGS0008 in humans, as it is in monkeys. Consequently, MGS0274 besylate is expected to function as a preferable prodrug in humans.

Pregn-5-en-3β-ol and androst-5-en-3β-ol dicarboxylic acid esters as potential therapeutics for NMDA hypofunction: In vitro safety assessment and plasma stability

Neurosteroids are endogenous steroidal compounds that can modulate neuronal receptors. N-Methyl-D-aspartate receptors (NMDARs) are glutamate-gated, calcium-permeable ion channels that are of particular interest, as they participate in synaptic transmission and are implicated in various processes, such as learning, memory, or long-term neuronal potentiation. Positive allosteric modulators that increase the activity of NMDARs may provide a therapeutic aid for patients suffering from neuropsychiatric disorders where NMDAR hypofunction is thought to be involved, such as intellectual disability, autism spectrum disorder, or schizophrenia. We recently described a new class of pregn-5-ene and androst-5-ene 3β-dicarboxylic acid hemiesters (2-24) as potent positive modulators of NMDARs. Considering the recommended guidelines for the early stage development of new, potent compounds, we conducted an in vitro safety assessment and plasma stability screening to evaluate their druglikeness. First, compounds were screened for their hepatotoxicity and mitochondrial toxicity in a HepG2 cell line. Second, toxicity in primary rat postnatal neurons was estimated. Next, the ability of compounds 2-24 to cross a Caco-2 monolayer was also studied. Finally, rat and human plasma stability screening revealed an unforeseen high stability of the C-3 hemiester moiety. In summary, by using potency/efficacy towards NMDARs data along with toxicity profile, Caco-2 permeability and plasma stability, compounds 14 and 15 were selected for further in vivo animal studies.

Inhibitory Effects of Phenylpropanoid Derivatives from Oenanthe javanica on Antigen-Stimulated Degranulation in RBL-2H3 Cells

Two diacyldaucic acids (1 and 2), an α,β-unsaturated γ-lactone-type lignan (3) and its derivatives (4-6), and 12 known compounds were isolated from a traditional East Asian vegetable, Oenanthe javanica. The absolute configuration of 1 was validated by obtaining (+)-osbeckic acid through acid hydrolysis. The absolute configurations of 3-5 were determined by comparing their experimental and computed ECD data. The conclusion was supported by applying the phenylglycine methyl ester method to 3. Compound 6 was obtained as an interconverting mixture of isomers in a 3:1 trans- cis ratio. Several water-soluble components (1, 3, and 6) showed concentration-dependent inhibitory effects on antigen-stimulated degranulation in RBL-2H3 cells without producing any direct cytotoxicity against RBL-2H3 or HeLa cells.

Accumulation of Azelaic Acid in Xylella fastidiosa-Infected Olive Trees: A Mobile Metabolite for Health Screening

Monitoring Xylella fastidiosa is critical for eradicating or at least containing this harmful pathogen. New low-cost and rapid methods for early detection capability are very much needed. Metabolomics may play a key role in diagnosis; in fact, mobile metabolites could avoid errors in sampling due to erratically distributed pathogens. Of the various different mobile signals, we studied dicarboxylic azelaic acid (AzA) which is a key molecule for biotic stress plant response but has not yet been associated with pathogens in olive trees. We found that infected Olea europaea L. plants of cultivars Cellina di Nardò (susceptible to X. fastidiosa) and Leccino (resistant to the pathogen) showed an increase in AzA accumulation in leaf petioles and in sprigs by approximately seven- and sixfold, respectively, compared with plants negative to X. fastidiosa or affected by other pathogens. No statistically significant variation was found between the X. fastidiosa population level and the amount of AzA in either of the plant tissues, suggesting that AzA accumulation was almost independent of the amount of pathogen in the sample. Furthermore, the association of AzA with X. fastidiosa seemed to be reliable for samples judged as potentially false-negative by quantitative polymerase chain reaction (cycle threshold [C_t] > 33), considering both the absolute value of AzA concentration and the values normalized on negative samples, which diverged significantly from control plants. The accumulation of AzA in infected plants was partially supported by the differential expression of two genes (named OeLTP1 and OeLTP2) encoding lipid transport proteins (LTPs), which shared a specific domain with the LTPs involved in AzA activity in systemic acquired resistance in other plant species. The expression level of OeLTP1 and OeLTP2 in petiole samples showed significant upregulation in samples positive to X. fastidiosa of both cultivars, with higher expression levels in positive samples of Cellina di Nardò compared with Leccino, whereas the two transcripts had a low expression level (C_t > 40) in negative samples of the susceptible cultivar. Although the results derived from the quantification of AzA cannot confirm the presence of the erratically distributed X. fastidiosa, which can be definitively assessed by traditional methods, we believe they represent a fast and cheap screening method for large-scale monitoring.

Pyrrolizidine Alkaloids: Biosynthesis, Biological Activities and Occurrence in Crop Plants

Pyrrolizidine alkaloids (PAs) are heterocyclic secondary metabolites with a typical pyrrolizidine motif predominantly produced by plants as defense chemicals against herbivores. They display a wide structural diversity and occur in a vast number of species with novel structures and occurrences continuously being discovered. These alkaloids exhibit strong hepatotoxic, genotoxic, cytotoxic, tumorigenic, and neurotoxic activities, and thereby pose a serious threat to the health of humans since they are known contaminants of foods including grain, milk, honey, and eggs, as well as plant derived pharmaceuticals and food supplements. Livestock and fodder can be affected due to PA-containing plants on pastures and fields. Despite their importance as toxic contaminants of agricultural products, there is limited knowledge about their biosynthesis. While the intermediates were well defined by feeding experiments, only one enzyme involved in PA biosynthesis has been characterized so far, the homospermidine synthase catalyzing the first committed step in PA biosynthesis. This review gives an overview about structural diversity of PAs, biosynthetic pathways of necine base, and necic acid formation and how PA accumulation is regulated. Furthermore, we discuss their role in plant ecology and their modes of toxicity towards humans and animals. Finally, several examples of PA-producing crop plants are discussed.

Synthesis and Gelling Abilities of Polyfunctional Cyclohexane-1,2-dicarboxylic Acid Bisamides: Influence of the Hydroxyl Groups

New enantiomerically pure C₁₆-alkyl diamides derived from trihydroxy cyclohexane-1,2-dicarboxylic acid have been synthesized from (−)-shikimic acid. The hydroxyl groups in these compounds are free or, alternatively, they present full or partial protection. Their gelling abilities towards several solvents have been tested and rationalized by means of the combined use of Hansen solubility parameters, scanning electron microscopy (SEM), and circular dichroism (CD), as well as computational calculations. All the results allowed us to account for the capability of each type of organogelator to interact with different solvents and for the main mode of aggregation. Thus, compounds with fully protected hydroxyl groups are good organogelators for methanol and ethanol. In contrast, a related compound bearing three free hydroxyl groups is insoluble in water and polar solvents including alcohols but it is able to gelate some low-polarity solvents. This last behavior can be justified by strong hydrogen bonding between molecules of organogelator, which competes advantageously with polar solvent interactions. As an intermediate case, an organogelator with two free hydroxyl groups presents an ambivalent ability to gelate both apolar and polar solvents by means of two aggregation patterns. These involve hydrogen bonding interactions of the unprotected hydroxyl groups in apolar solvents and intermolecular interactions between amide groups in polar ones.

Identification of 4-methyl-5-oxo-octane-1,8-dioic acid and the derivatives as metabolites of steroidal C,D-ring degradation in Comamonas testosteroni TA441

Comamonas testosteroni TA441 degrades steroids via 9,17-dioxo-1,2,3,4,10,19-hexanorandrostan-5-oic acid, which is presumed to be further degraded by β-oxidation. In the β-oxidation process, Coenzyme A (CoA)-ester of 9-oxo-1,2,3,4,5,6,10,19-octanor-13,17-secoandrost-8(14)-ene-7,17-dioic acid is produced and converted by β-ketoacyl-CoA-transferase encoded by ORF1 and ORF2 (scdL1L2) to cleave the remaining C-ring. In this study, we isolated and identified 4-methyl-5-oxo-octane-1,8-dioic acid and 4-methyl-5-oxo-3-octene-1,8-dioic acid from the culture of the ORF3 (scdN)-null mutant as metabolites of steroid degradation (ADD and cholic acid analogues; cholic acid, chenodeoxycholic acid, deoxycholic acid, and lithocholic acid). In addition of these compounds, UHPLC/MS analysis of the culture of the scdN-null mutant revealed significant accumulation of another compound, which was detected as a dominant peak of m/z 155 ([M-CO₂]^-) accompanied by a small peak of parental ion (m/z 199 [M^-]). On the bases of experimental data, this compound was presumed to be 4-methyl-5-oxo-2-octene-1,8-dioic acid, whose CoA-ester was indicated to be converted by scdN-encoded CoA-hydratase into the CoA-ester of 3-hydroxy-4-methyl-5-oxooctan-1,7-carboxylic acid.

Tunability of Biodegradable Poly(amine- co-ester) Polymers for Customized Nucleic Acid Delivery and Other Biomedical Applications

Gene therapy promises to treat diseases that arise from genetic abnormalities by correcting the underlying cause of the disease rather than treating the associated symptoms. Successful transfer of nucleic acids into cells requires efficient delivery vehicles that protect the cargo and can penetrate the appropriate cellular barriers before releasing their contents. Many viral vectors and synthetic polycationic vectors for nucleic acid delivery do not translate well from in vitro to in vivo applications due to their instability and toxicity. We synthesized and characterized a library of biocompatible low charge density polymers from a family of poly(amine- co-ester) (PACE) terpolymers produced via enzyme catalyzed polymerization. PACE polymers are highly customizable; we found that the terpolymer composition can be optimized to produce efficient transfection of various nucleic acids-including DNA plasmids, mRNA, and siRNA-in specific cell types with low toxicity. Our findings suggest that the unique tunability of PACEs offers new tools for gene therapy and other biomedical applications.

Virtual Fragment Screening Identification of a Quinoline-5,8-dicarboxylic Acid Derivative as a Selective JMJD3 Inhibitor

The quinoline-5,8 dicarboxylic acid scaffold has been identified by a fragment-based approach as new potential lead compound for the development of JMJD3 inhibitors. Among them, 3-(2,4-dimethoxypyrimidin-5-yl)quinoline-5,8-dicarboxylic acid (compound 3) shows low micromolar inhibitory activity against Jumonji domain-containing protein 3 (JMJD3). The experimental evaluation of inhibitory activity against seven related isoforms of JMJD3 highlighted an unprecedented selectivity toward the biological target of interest.

The Efficacy and Safety of Azelaic Acid 15% Foam in the Treatment of Facial Acne Vulgaris

BACKGROUND

Azelaic acid demonstrates anti-inflammatory, anti-oxidative, anti-comedogenic, and anti-microbial effects. Azelaic acid 20% cream is currently approved for the treatment of acne vulgaris, and azelaic acid 15% foam has recently been approved for rosacea. Given the favorable tolerability profile of foam preparations, it is reasonable to assume that azelaic acid 15% foam could serve as a viable treatment option for facial acne.

OBJECTIVE

To examine the efficacy and safety of azelaic acid 15% foam in the treatment of moderate-to-severe facial acne Methods: Twenty subjects with moderate-to-severe facial acne vulgaris were enrolled in this two-center, open-label pilot study. All study subjects were treated with azelaic acid 15% foam for 16 weeks. Efficacy analyses were based on the change in facial investigator global assessment (FIGA) and changes in total, inflammatory, non-inflammatory lesion counts between baseline and week 16.

RESULTS

There was a significant reduction in FIGA scores from baseline to week 16 (p = .0004), with 84% of subjects experiencing at least a 1 grade improvement, and 63% of subjects achieving a final grade of Clear or Almost Clear. All subjects experienced reductions in inflammatory and total lesion counts by week 16, and 89% of subjects experienced reductions in non-inflammatory lesions. Azelaic acid 15% foam was well tolerated, with almost all instances of erythema, dryness, peeling, oiliness, pruritus, and burning being of mild or trace degree, and most adverse effects resolving by the end of the study.

CONCLUSION

Azelaic acid 15% foam is effective and safe in the treatment of facial acne vulgaris. Given the convenience of foam vehicles, azelaic acid 15% foam should be considered as a viable treatment option for this condition. J Drugs Dermatol. 2018;17(6):641-645.

Enhancing the Bioconversion of Azelaic Acid to Its Derivatives by Response Surface Methodology

Azelaic acid (AzA) and its derivatives have been known to be effective in the treatment of acne and various cutaneous hyperpigmentary disorders. The esterification of azelaic acid with lauryl alcohol (LA) to produce dilaurylazelate using immobilized lipase B from Candida antarctica (Novozym 435) is reported. Response surface methodology was selected to optimize the reaction conditions. A well-fitting quadratic polynomial regression model for the acid conversion was established with regards to several parameters, including reaction time and temperature, enzyme amount, and substrate molar ratios. The regression equation obtained by the central composite design of RSM predicted that the optimal reaction conditions included a reaction time of 360 min, 0.14 g of enzyme, a reaction temperature of 46 °C, and a molar ratio of substrates of 1:4.1. The results from the model were in good agreement with the experimental data and were within the experimental range (R² of 0.9732).The inhibition zone can be seen at dilaurylazelate ester with diameter 9.0±0.1 mm activities against Staphylococcus epidermidis S273. The normal fibroblasts cell line (3T3) was used to assess the cytotoxicity activity of AzA and AzA derivative, which is dilaurylazelate ester. The comparison of the IC₅₀ (50% inhibition of cell viability) value for AzA and AzA derivative was demonstrated. The IC₅₀ value for AzA was 85.28 μg/mL, whereas the IC₅₀ value for AzA derivative was more than 100 μg/mL. The 3T3 cell was still able to survive without any sign of toxicity from the AzA derivative; thus, it was proven to be non-toxic in this MTT assay when compared with AzA.

Synthesis, Characterization, and Photoelectrochemical Catalytic Studies of a Water-Stable Zinc-Based Metal-Organic Framework

Metal-organic frameworks (MOFs) are class of porous materials that can be assembled in a modular manner by using different metal ions and organic linkers. Owing to their tunable structural properties, these materials are found to be useful for gas storage and separation technologies, as well as for catalytic applications. A cost-effective zinc-based MOF ([Zn(bpcda)(bdc)]_n ) is prepared by using N,N'-bis(pyridin-4-ylmethylene)cyclohexane-1,4-diamine [N,N'-bis(pyridin-4-ylmethylene)cyclohexane-1,4-diamine] and benzenedicarboxylic acid (bdc) linkers. This new material exhibits remarkable photoelectrochemical (PEC) catalytic activity in water splitting for the evolution of oxygen. Notably, this non-noble metal-based MOF, without requiring immobilization on other supports or containing metal particles, produced a highest photocurrent density of 31 μA cm^-2 at 0.9 V, with appreciable stability and negligible photocorrosion. Advantageously for the oxygen evolution process, no external reagents or sacrificial agents are required in the aqueous electrolyte solution.

Unexpected Diffusion Anisotropy of Carbon Dioxide in the Metal-Organic Framework Zn2(dobpdc)

Metal-organic frameworks are promising materials for energy-efficient gas separations, but little is known about the diffusion of adsorbates in materials featuring one-dimensional porosity at the nanoscale. An understanding of the interplay between framework structure and gas diffusion is crucial for the practical application of these materials as adsorbents or in mixed-matrix membranes, since the rate of gas diffusion within the adsorbent pores impacts the required size (and therefore cost) of the adsorbent column or membrane. Here, we investigate the diffusion of CO2 within the pores of Zn2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) using pulsed field gradient (PFG) nuclear magnetic resonance (NMR) spectroscopy and molecular dynamics (MD) simulations. The residual chemical shift anisotropy for pore-confined CO2 allows PFG NMR measurements of self-diffusion in different crystallographic directions, and our analysis of the entire NMR line shape as a function of the applied field gradient provides a precise determination of the self-diffusion coefficients. In addition to observing CO2 diffusion through the channels parallel to the crystallographic c axis (self-diffusion coefficient D∥ = (5.8 ± 0.1) × 10-9 m2 s-1 at a pressure of 625 mbar CO2), we unexpectedly find that CO2 is also able to diffuse between the hexagonal channels in the crystallographic ab plane (D⊥ = (1.9 ± 0.2) × 10-10 m2 s-1), despite the walls of these channels appearing impermeable by single-crystal X-ray crystallography and flexible lattice MD simulations. Observation of such unexpected diffusion in the ab plane suggests the presence of defects that enable effective multidimensional CO2 transport in a metal-organic framework with nominally one-dimensional porosity.

Insulin sensitizer prevents and ameliorates experimental type 1 diabetes

Insulin-dependent type-1 diabetes (T1D) is driven by autoimmune β-cell failure, whereas systemic resistance to insulin is considered the hallmark of insulin-independent type-2 diabetes (T2D). In contrast to this canonical dichotomy, insulin resistance appears to precede the overt diabetic stage of T1D and predict its progression, implying that insulin sensitizers may change the course of T1D. However, previous attempts to ameliorate T1D in animal models or patients by insulin sensitizers have largely failed. Sensitization to insulin by MEthyl-substituted long-chain DICArboxylic acid (MEDICA) analogs in T2D animal models surpasses that of current insulin sensitizers, thus prompting our interest in probing MEDICA in the T1D context. MEDICA efficacy in modulating the course of T1D was verified in streptozotocin (STZ) diabetic rats and autoimmune nonobese diabetic (NOD) mice. MEDICA treatment normalizes overt diabetes in STZ diabetic rats when added on to subtherapeutic insulin, and prevents/delays autoimmune T1D in NOD mice. MEDICA treatment does not improve β-cell insulin content or insulitis score, but its efficacy is accounted for by pronounced total body sensitization to insulin. In conclusion, potent insulin sensitizers may counteract genetic predisposition to autoimmune T1D and amplify subtherapeutic insulin into an effective therapeutic measure for the treatment of overt T1D.

Dicarboxylic acids as pH sensors for hyperpolarized 13C magnetic resonance spectroscopic imaging

Imaging tumoral pH may help to characterize aggressiveness, metastasis, and therapeutic response. We report the development of hyperpolarized [2-13C,D10]diethylmalonic acid, which exhibits a large pH-dependent 13C chemical shift over the physiological range. We demonstrate that co-polarization with [1-13C,D9]tert-butanol accurately measures pH via13C NMR and magnetic resonance spectroscopic imaging in phantoms.