Photostability of Topical Agents Applied to the Skin: A Review

Establishment of Optimal Drug Delivery System and Evaluation of Utilization of Hydrogel Contact Lens According to the Addition Method of Tretinoin and Bovine Serum Albumin

This study aims to build an optimal drug delivery system by manufacturing and evaluating a hydrogel contact lens using Tretinoin (ATRA) and protein nanoparticles to improve the drug delivery system as an ophthalmic medical contact lens. To evaluate the optical and physical properties of the manufactured lens, the spectral transmittance, refractive index, water content, contact angle, AFM, tensile strength, drug delivery, and antibacterial properties were analyzed. The contact lens was manufactured to contain ATRA and bovine serum albumin (BSA) in different ways, and the results confirmed that A, B, and C each had different physical properties. In particular, for Sample A, using the soak and release method and using ATRA solution in the contact lens with BSA added, the wettability was 55.94°, the tensile strength was 0.1491 kgf/mm2, and drug delivery released 130.35 μm over 336 h, which was found to be superior to samples B and C. Therefore, the three hydrogel contact lenses compared in this study according to the addition method of ATRA and BSA can be used in various ways to build an optimal drug delivery system that is very useful as an ophthalmic medical lens.

Photosensitizing Properties of the Topical Retinoid Drug Adapalene

Photoreactivity is an important issue for topical drugs especially when these are applied on the sun-exposed skin area. In this context, third-generation retinoids are of special interest due to their conjugated chemical structure and their use in the treatment of acne. Herein, the phototoxic potential of one of these drugs, adapalene, is established using an in vitro 3T3 Neutral Red Uptake (NRU) test. Photophysical studies demonstrate the involvement of a Type II process with an efficient formation of singlet oxygen. Interestingly, quenching of the adapalene singlet manifold by oxygen leads to an increased production of this reactive oxygen species through the tagged O2-enhanced intersystem crossing process. Taken together, these results are relevant from a toxicological point of view as adapalene could be considered as a double-edged sword: it can be at the origin of undesired skin photosensitivity reactions or be considered as a candidate for topical photodynamic therapy.

New Phytol Derivatives with Increased Cosmeceutical Potential

Natural compounds are widely incorporated into cosmetic products for many purposes. Diterpenes often function as fragrances, enhancing the sensory experience of these formulations. However, current trends in cosmetic science aim to develop multifunctional products, where compounds traditionally used for texture or fragrance also possess biological activities that contribute to the product's efficacy. In this context, this study focuses on synthesizing derivatives of phytol-a compound already presents in cosmetic formulations-to enhance its anti-aging properties. The derivatives were synthesized through esterification with substituted benzoic and cinnamic acids, known for their antioxidant and enzyme inhibition properties. Reaction yields ranged from 91.0% to 5.2%, depending on the substituents in acid derivatives. The structures of the synthesized compounds were confirmed through NMR and MS techniques. Both the natural and newly synthesized derivatives were evaluated for their cosmeceutical potential using antioxidant assays and inhibition assays for tyrosinase, elastase, collagenase, and hyaluronidase. This work presents the first report of the synthesis and cosmetic evaluation of several of these derivatives. Comparing with phytol (1), which presented an IC50 of 77.47 µM, four of the derivatives presented improved tyrosinase inhibitory activity, with phytyl 4-methoxybenzoate being the most active (IC50 = 27.9 µM), followed by phytyl benzoate with an IC50 of 34.73 µM. Substitutions at other positions on the aromatic ring were less effective. Molecular docking studies confirmed that the modifications potentiated a stronger interaction between the synthesized compounds and tyrosinase.

Photodegradation of indomethacin and naproxen contained within commercial products for skin - RAP

Patient can be exposed to the photodegradation products of a drug after skin application of topical formulations. NSAIDs, with analgesic and anti-inflammatory properties, are known for the potential photoinstability, and are applied often in the form of creams, gels or liquids, commonly used among athletes, elderly people, geriatric patients and patients treated with multidrug therapies. Susceptibility to photodegradation hazard of those group arises the need for development of a new approach, with the ability to evaluate the patient safety. We planned to use a rapid assessment procedure (RAP) of safety by testing the photostability of popular skin medicinal products. This method, proposed many years ago by WHO, is now reintroduced to analytical applications in industry, when emergency drugs (e.g. for Covid) are implemented to the market in accelerated procedures. In the health care system, qualitative evaluation of drugs is extremely valuable, therefore we have planned to identify photodegradation using the FTIR method - infrared spectroscopy and DSC - differential scanning calorimetry, whilst the risk of formation of genotoxic products using the Ames test. We have successfully demonstrated that changes in the chemical structure and physical form of both pure APIs and drug products containing the API be assessed in a short time. Another advantage of our work is the combination of the developed results from FTIR/NIR spectra with statistical analysis. As a result, full and quick qualitative assessment of the effects of photoexposure of selected NSAIDs is performed, fortunately showing no mutagenicity. Due to the popularity of NSAIDs applied to the skin, a gel containing naproxen and spray with indomethacin were selected for testing. The analysis carried out for various formulations of both preparations allows us to demonstrate the universality of the applied RAP methods in assessing the risk of hazard to the patient, thus we present research results that expand or widen the knowledge and assessment of risks related to the use of drugs on the skin.

Attempts to Improve Lipophilic Drugs' Solubility and Bioavailability: A Focus on Fenretinide

The development of numerous drugs is often arrested at clinical testing stages, due to their unfavorable biopharmaceutical characteristics. It is the case of fenretinide (4-HPR), a second-generation retinoid, that demonstrated promising in vitro cytotoxic activity against several cancer cell lines. Unfortunately, response rates in early clinical trials with 4-HPR did not confirm the in vitro findings, mainly due to the low bioavailability of the oral capsular formulation that was initially developed. Capsular 4-HPR provided variable and insufficient drug plasma levels attributable to the high hepatic first-pass effect and poor drug water solubility. To improve 4-HPR bioavailability, several approaches have been put forward and tested in preclinical and early-phase clinical trials, demonstrating generally improved plasma levels and minimal systemic toxicities, but also modest antitumor efficacy. The challenge is thus currently still far from being met. To redirect the diminished interest of pharmaceutical companies toward 4-HPR and promote its further clinical development, this manuscript reviewed the attempts made so far by researchers to enhance 4-HPR bioavailability. A comparison of the available data was performed, and future directions were proposed.

In vitro screening of topical formulation excipients for epithelial toxicity in cancerous and non-cancerous cell lines

Chemical excipients used in topical formulations may be toxic to living skin cells. Here, we compared the in vitro toxicity of some common solubilizing excipients against human melanoma cells, human keratinocytes (HaCaT) and primary skin fibroblasts (FB) as examples of cancerous, immortalized and primary human skin cells, often used as experimental models representative of in vivo conditions. Two distinct endpoint assays (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and crystal violet (CV)) were used. The mechanism of cell death after excipient exposure was assessed through Reactive Oxygen Species (ROS) production, cell membrane integrity and cell cycle progression. Results showed that the surfactants, Labrasol®, Labrafil® and Transcutol®, were less toxic than Triton X-100 (a model irritant) in all cell types whereas the oil, Labrafac®, was non-toxic. The human melanoma WM164 cell line showed the greatest sensitivity toward cytotoxicity after chemical exposure, while the other cell lines were more resistant. The relative excipient cytotoxicity responses observed in the MTT and CV assays were comparable and similar trends were seen in their estimated 50 % inhibitory concentration (IC50) values. DNA fragmentation by flow cytometry after exposing the cells to IC50 concentrations of the excipients showed negligible apoptotic populations. ROS production was increased in all cell types after toxic exposure; however, ROS elevation did not lead to apoptosis. The toxicity profiles of each excipient are not only relevant to their use in formulating safe topical products but also in the potential synergistic efficacy in the topical treatment of melanoma.

Molecular Mechanisms Involved in the Chemical Instability of ONC201 and Methods to Counter Its Degradation in Solution

Glioblastoma is one of the most common and aggressive forms of brain tumor, a rare disease for which there is a great need for innovative therapies. ONC201, a new drug substance, has been used in a compassionate treatment program where the choice of dosage form and regimen have yet to be justified. The prior knowledge needed to anticipate ONC201 stability problems has recently been partially addressed, by (i) showing that ONC201 is sensitive to light and oxidation and (ii) identifying the molecular structures of the main degradation products formed. The aim of the work presented here was to improve our understanding of the degradation pathways of ONC201 using data from ab initio calculations and experimental work to supplement the structural information we already published. The C-H bonds located αto the amine of the tetrahydropyridine group and those located alpha to the imine function of the dihydroimidazole group exhibit the lowest bond dissociation energies (BDEs) within the ONC201 molecule. Moreover, these values drop well below 90 kcal.mol-1 when ONC201 is in an excited state (S1; T1). The structures of the photoproducts we had previously identified are consistent with these data, showing that they would have resulted from radical processes following the abstraction of alpha hydrogens. Concerning ONC201's sensitivity to oxidation, the structures of the oxidation products matched the critical points revealed through mapped electrostatic potential (MEP) and average local ionization energy (ALIE). The data obtained from ab initio calculations and experimental work showed that the reactivity of ONC201 to light and oxidation conditions is highly dependent on pH. While an acidic environment (pH < 6) contributes to making ONC201 quantitatively more stable in solution in the face of oxidation and photo-oxidation, it nevertheless seems that certain chemical groups in the molecule are more exposed to nucleophilic attacks, which explains the variation observed in the profile of degradation products formed in the presence of certain antioxidants tested. This information is crucial to better understand the stability results in the presence of antioxidant agents and to determine the right conditions for them to act.

Prioritization of pharmaceuticals and personal care products in the surface waters of Korea: Application of an optimized risk-based methods

The occurrence of PPCPs in aquatic environments and their potential adverse effects on aquatic organisms have raised worldwide concerns. To address this issue, a study was conducted to analyze 137 selected PPCPs in Korean surface waters, and an optimized risk-based prioritization was performed. The results revealed that 120 PPCPs were detected, with 98 quantified at concentrations ranging from few ng/L to 42,733 ng/L for metformin. The 95% upper confidence limit (UCL95) of the mean value of the measured environmental concentration (MEC) for Metformin was about eight times higher than the second highest compound, dimethyl phthalate, indicating that antidiabetic groups had the highest concentration among the therapeutic groups. An optimized risk-based prioritization was then assessed based on the multiplication of two indicators, the Frequency of Exceedance and the Extent of Exceedance of Predicted No-Effect Concentrations (PNECs), which can be calculated using the traditional risk quotient (RQ) approach. The study found that clotrimazole had the highest risk quotient value of 17.4, indicating a high risk to aquatic organisms, with seven and 13 compounds showing RQ values above 1 and 0.1, respectively. After considering the frequency of exceedance, clotrimazole still had the highest novel risk quotient (RQ_f) value of 17.4, with 99.6% of its MECs exceeding PNECs. However, the number of compounds with RQ_f values above 1 decreased from seven to five, with cetirizine and flubendazole being excluded. Furthermore, only 10 compounds exhibited RQ_f values above 0.1. The study also observed significant differences in the results between risk-based and exposure-based prioritization methods, with only five compounds, cetirizine, olmesartan, climbazole, sulfapyridine, and imidacloprid, identified in both methods. This finding highlights the importance of considering multiple methods for prioritizing chemicals, as different approaches may yield different results.

Emerging Trends in the Use of Topical Antifungal-Corticosteroid Combinations

A broad range of topical antifungal formulations containing miconazole or terbinafine as actives are commonly used as efficacious choices for combating fungal skin infections. Their many benefits, owing to their specific mechanism of action, include their ability to target the site of infection, enhance treatment efficacy and reduce the risk of systemic side effects. Their proven efficacy, and positioning in the treatment of fungal skin infections, is enhanced by high patient compliance, especially when appropriate vehicles such as creams, ointments and gels are used. However, inflammation as a result of fungal infection can often impede treatment, especially when combined with pruritus (itch), an unpleasant sensation that elicits an urge to scratch. The scratching that occurs in response to pruritus frequently accelerates skin damage, ultimately aggravating and spreading the fungal infection. To help overcome this issue, a topical antifungal-corticosteroid combination consisting of miconazole or terbinafine and corticosteroids of varying potencies should be used. Due to their inherent benefits, these topical antifungal-corticosteroid combinations can concomitantly and competently attenuate inflammation, relieve pruritus and treat fungal infection.

Photokinetics of Dacarbazine and Nifedipine under polychromatic light irradiation and their application as new reliable actinometers for the ultraviolet range

The photokinetic behaviour of drugs driven by polychromatic light is an area of pharmaceutics that has not received a lot of attention. Most often, such photokinetic data is treated by thermal kinetic models (i.e., the classical 0th-, 1st- or 2nd-order equations). Such models were not analytically derived from the rate-laws of the photodegradation reactions. Polychromatic light kinetic modelling is hence of importance, as a means to providing adequate toolkits and metrics. This paper aims at proposing two reliable drug-actinometers useful for polychromatic UVA range. The general actinometric methodology offered here is also useful for any drugs/materials obeying a primary photoprocess where both reactant and photoproduct absorb the incident light, of the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$AB{(1\Phi )}_{{\varepsilon }_{B}\ne 0}$$\end{document}AB(1Φ)εB≠0 type. The present method has been consolidated by the η-order kinetics. This framework further demonstrated the lamp-specificity of actinometers. Overall, Dacarbazine and Nifedipine photodegradations obeyed η-order kinetics, and stand as effective actinometers that can be recommended for the ICH Q1b photostability testing.

MS imaging and absorption methods visualizing sun filter skin spatial distribution and penetration

Sunscreens must now be effective in protecting skin from ultraviolet, as well as visible/infrared radiation. Here, TriAsorB, a new broad-spectrum sun filter, was formulated with three other sunscreens and their distribution on human skin was studied using a standard penetration protocol and two novel mass spectrometry imaging techniques: atmospheric pressure matrix assisted laser desorption ionization (AP-MALDI) coupled to high resolution mass spectrometry and time of flight - secondary ion mass spectrometry (ToF-SIMS). The standard penetration protocol showed that sun filters absorption was very low, with most of the dose recovered at the surface (none entered the receptor fluid). Absorption was not increased in damaged skin. The results were confirmed by AP-MALDI and ToF-SIMS imaging of the spatial distribution of molecular species in cross-section samples of human skin. Each sun filter was detected on or in the stratum corneum, with a good homogenous coverage over the valleys and peaks of the skin, and correlated well with the distribution of endogenous biomarkers. In conclusion, conventional and novel imaging analysis methods showed that the sun filters remained mainly on the skin surface after topical application. Mass spectrometry imaging is a promising complementary approach to traditional skin penetration studies to visualize penetration of compounds.

Clays as Vehicles for Drug Photostability

Clay minerals are often used due to their high adsorption capacity, which has sparked interest in their biological applications to stabilize drugs and pharmaceutical products. This research aims to summarize information about the stability of drugs, cosmetics, dermocosmetics, and pharmaceutical compounds incorporated in the structure of different clay minerals. The databases used to search the articles were Web of Science, Scopus, PubMed, and Science Direct. Photostabilization of these compounds is reviewed and its importance demonstrated. For biological applications, the increase in solubility and bioavailability of clay minerals has proven useful for them as drug carriers. While their natural abundance, low toxicity, and accessible cost have contributed to classical applications of clay minerals, a wide range of interesting new applications may be facilitated, mainly through incorporating different organic molecules. The search for new functional materials is promising to challenge research on clay minerals in biological or biotechnological approaches.

Developing Eco-Friendly Skin Care Formulations with Microemulsions of Essential Oil

With the rising public awareness of environmental issues, consumers are increasingly demanding skin care products that create less environmental impact but still provide the same or even greater efficacy. In the skin care arena, microemulsions have been receiving increased attention as the promising delivery technology of skin care actives. Essential oils such as peppermint oil, lavender oil and eucalyptus oil are purported to have excellent antioxidant and antimicrobial properties that could be used as the eco-friendly alternatives for synthetic antioxidants and preservatives in the skin care formulations. This work therefore seeks to develop eco-friendly skin care formulations based on microemulsions of essential oil. Peppermint oil, lavender oil and eucalyptus oil were used as the oil phase to formulate naringin-loaded microemulsions, which demonstrated similar or better antioxidant and antimicrobial properties compared to the synthetic ones. When formulated into gel form, naringin-loaded microemulsion-gel formulations showed enhanced stability and release profile over their unformulated counterpart. Hence, microemulsions of essential oil developed in this work conferred a 4-fold benefits to the skin care formulations: (1) improved release (membrane permeation) of skin care active, (2) improved stability of skin care active, (3) as an eco-friendly alternative to synthetic antioxidant, and (4) a self-preserving system.

Sunscreens and Photoaging: A Review of Current Literature

Sunscreens have been on the market for many decades as a means of protection against ultraviolet-induced erythema. Over the years, evidence has also shown their efficacy in the prevention of photoaging, dyspigmentation, DNA damage, and photocarcinogenesis. In the USA, most broad-spectrum sunscreens provide protection against ultraviolet B (UVB) radiation and short-wavelength ultraviolet A (UVA) radiation. Evidence suggests that visible light and infrared light may play a role in photoaging and should be considered when choosing a sunscreen. Currently, there is a paucity of US FDA-approved filters that provide protection against long UVA (> 370 nm) and none against visible light. Additionally, various sunscreen additives such as antioxidants and photolyases have also been reported to protect against and possibly reverse signs of photoaging. This literature review evaluates the utility of sunscreen in protecting against photoaging and further explores the requirements for an ideal sunscreen.

Formulation, Optimization and Evaluation of Luteolin-Loaded Topical Nanoparticulate Delivery System for the Skin Cancer

In the present study, luteolin (LT)-loaded nanosized vesicles (LT-NVs) were prepared by a solvent evaporation-hydration method using phospholipid and edge activator. The formulation was optimized using three factors at a three-level Box-Behnken design. The formulated LT-NVs were prepared using the three independent variables phospholipid (A), edge activator (B) and sonication time (C). The effect of used variables was assessed on the vesicle size (Y1) and encapsulation efficiency (Y2). The selection of optimum composition (LT-NVopt) was based on the point prediction method of the software. The prepared LT-NVopt showed the particle size of 189.92 ± 3.25 nm with an encapsulation efficiency of 92.43 ± 4.12% with PDI and zeta potential value of 0.32 and -21 mV, respectively. The formulation LT-NVopt was further converted into Carbopol 934 gel (1% w/v) to enhance skin retention. LT-NVoptG was further characterized for viscosity, spreadability, drug content, drug release, drug permeation and antioxidant, antimicrobial and cytotoxicity assessment. The evaluation result revealed optimum pH, viscosity, spreadability and good drug content. There was enhanced LT release (60.81 ± 2.87%), as well as LT permeation (128.21 ± 3.56 µg/cm2/h), which was found in comparison to the pure LT. The antioxidant and antimicrobial study results revealed significantly (p ˂ 0.05) better antioxidant potential and antimicrobial activity against the tested organisms. Finally, the samples were evaluated for cytotoxicity assessment using skin cancer cell line and results revealed a significant difference in the viability % at the tested concentration. LT-NVoptG showed a significantly lower IC50 value than the pure LT. From the study, it can be concluded that the prepared LT-NVoptG was found to be an alternative to the synthetic drug as well as conventional delivery systems.

Photodegradation of Bexarotene and Its Implication for Cytotoxicity

A detailed understanding of the stability of an active pharmaceutical ingredient and a pharmaceutical dosage form is essential for the drug-development process and for safe and effective use of medicines. Photostability testing as an inherent part of stability studies provides valuable knowledge on degradation pathways and structures of products generated under UV irradiation. Photostability is particularly important for topically administered drugs, as they are more exposed to UV radiation. Bexarotene is a more recent third-generation retinoid approved by the U.S. Food and Drug Administration and the European Medicines Agency as a topically applied anticancer agent. The present study aimed to assess bexarotene photostability, including the presence of UV filters, which have been permitted to be used in cosmetic products in Europe and the USA. The bexarotene photostability testing was performed in ethanol solutions and in formulations applied on PMMA plates. The UPLC-MS/MS technique was used to determine the tested substance. The presence of photocatalysts such as TiO₂ or ZnO, as well as the organic UV filters avobenzone, benzophenone-3, meradimate, and homosalate, could contribute to degradation of bexarotene under UV irradiation. Four photocatalytic degradation products of bexarotene were identified for the first time. The antiproliferative properties of the degradation products of bexarotene were assessed by MTT assay on a panel of human adherent cancer cells, and concentration-dependent growth inhibition was evidenced on all tested cell lines. The cytotoxicity of the formed products after 4 h of UV irradiation was significantly higher than that of the parent compound (p < 0.05). Furthermore non-cancerous murine fibroblasts exhibited marked concentration-dependent inhibition by bexarotene, while the degradation products elicited more pronounced antiproliferative action only at the highest applied concentration.

A Clinician's Guide to Topical Retinoids

Retinoids are defined as molecules that bind to and activate retinoic acid receptors to influence the proliferation and differentiation of cells. Topical retinoids have evolved over the past several decades, being used in multiple dermatological conditions. This review aims to differentiate between synthetic and natural retinoids, discuss the pharmacology behind topical retinoids, highlight clinical applications, and categorize all the commercially available agents, including combination products. Understanding retinoid affinities for unique receptor subtypes can impact clinical decisions, resulting in optimizing treatment and enhancing patient adherence.

Exploitation of traditional healing properties, using the nanotechnology's advantages: The case of curcumin

Curcumin (CUR) has a long history of use as an antimicrobial, anti-inflammatory and wound healing agent, for the treatment of various skin conditions. Encapsulation in nanocarriers may overcome the administration limitations of CUR, such as lipophilicity and photodegradation. Lipid nanocarriers with different matrix fluidity (Solid Lipid Nanoparticles; SLN, Nanostructured Lipid Carriers; NLC, and Nanoemulsion; NE) were prepared for the topical delivery of curcumin (CUR). The occlusive properties and film forming capacity, as well as the release profile of incorporated CUR, its protection against photodegradation and wound healing were studied in vitro, using empty nanocarriers or free CUR as control. The results suggest that incorporation of CUR in nanocarriers offers a significant protection against photodegradation that is not influenced by the matrix fluidity. However, this characteristic regulates properties such as the occlusion, the release rate and wound healing ability of CUR. Nanoparticles of low fluidity provided better surface occlusion, film forming capacity and retention of the incorporated CUR. All nanocarriers but especially NLC, achieved faster wound healing at lower dose of incorporated CUR. In conclusion, nanotechnology may enhance the action of CUR against skin conditions. Important characteristics of the nanocarrier such as matrix fluidity should be taken into consideration in the design of CUR nanosystems of optimal efficiency.

Effects of UV-filter Photostabilizers in the Photostability and Phototoxicity of Vitamin A Palmitate Combined with Avobenzone and Octyl Methoxycinnamate

A challenge for cosmetic and dermatologic products is to develop new high-performance and safer anti-aging products based on new compounds to enhance the stability of retinyl palmitate combined with broad-spectrum UV-filters. Consequently, the aim of this work was to evaluate the effects of three often used avobenzone photostabilizers-ethylhexyl methoxycrylene (EHMCR), tris(tetramethylhydroxypiperidinol) citrate (TTMHP) and tris-biphenyl triazine (TBPT)-on the photostability and phototoxicity of the combination of avobenzone (AVO), octyl methoxycinnamate (OMC) and retinyl palmitate (RP). The photostability studies were performed by the exposure of formulations to UVA radiation. The phototoxicity was evaluated by the 3T3 neutral red uptake phototoxic assay (OECD TG 432). The addition of EHMCR, TBPT, and TTMHP in the formulations, with/or without RP, improved the photostability of AVO and RP, but EHMCR was the most effective in stabilizing RP. In the phototoxicity assay, the combinations AVO-OMC containing or not RP showed phototoxic potential. EHMCR and TTMHP reduced the phototoxicity of the combination AVO-OMC, whereas EHMCR also decreased the phototoxicity of the combination containing RP. Therefore, EHMCR might be used to the photostabilization of formulations of AVO-OMC with/or not RP, while TTMHP can be added to this photounstable UV-filter combination.

Photostability studies of GarKS peptides for topical formulation development

There is a growing interest in the use of antimicrobial peptides (AMPs) as potent alternatives for conventional antibiotics, especially in chronic infected wounds. The development of a suitable topical formulation requires a thorough assessment of the photostability profiles of AMPs. In this study, we sought to investigate the photostability of novel Garvicin KS (GarKS; composed of three peptides GakA, GakB, and GakC) peptides either as an individual peptide or in combinations. The photostability of the aqueous peptide solution was determined using Suntest (indoor and outdoor conditions). Furthermore, the antimicrobial efficacy of the peptides was evaluated following UVA irradiations. Photodegradation of the peptides under indoor and outdoor conditions followed first-order kinetics. Individual peptides (GakA, GakB, and GakC) were more prone to photodegradation as compared to combination peptides (GakA+GakB, GakB+GakC, and GakA+GakC) both under indoor and outdoor conditions where the GakA+GakB combination was the most photostable. A combination of GakA+GakB+GakC enhanced photostability under indoor conditions but was reduced under outdoor conditions. A combination of three peptides with an antioxidant (glutathione) or superoxide/hydrogen peroxide scavenger (trehalose) enhanced the photostability of peptides with the highest stability achieved at a peptide:photostabilizer molar ratio of 1:0.8 for glutathione. A nominal increase in the MIC value for the peptide combinations as opposed to a larger increase for individual peptides further supports the photostability effects of combination peptides following UVA irradiations. These results suggest that the GakA+GakB or GakA+GakB+GakC combinations exhibited the highest photostability with excellent antimicrobial efficacy deemed suitable for the development of a potent AMP formulation for topical applications.

Ruxolitinib photodegradation mechanisms by theoretical and experimental chemistry

Ruxolitinib is a Janus Kinase inhibitor currently approved for the treatment of myelofibrosis. It is also a promising drug for the treatment of skin and infectious diseases. In terms of pharmaceutical stability, although ruxolitinib has been established as being sensitive to light, no data on photodegradation processes are available to date, while these may be useful for quality risk management and any potential development of other pharmaceutical forms for other routes of administration. One way to partially fill this gap was to carry out a study that combines a consistent determination of the most sensitive sites of the molecule to photolysis through theoretical calculations based on functional density, with the identification of the main photodegradation products obtained after forced degradation. This integrated approach has shown converging results describing the mechanisms based on photo-oxidation that can lead to the opening of the pyrrole ring. Having access to the structure of the degradation products and intermediates then made it possible to carry out an in silico evaluation of their potential mutagenicity and it appears that some of them feature alert structures.

Photostability Testing of a Third-Generation Retinoid-Tazarotene in the Presence of UV Absorbers

Exposure of a drug to UV irradiation could affect its physicochemical properties. Hence, photostability testing is essential for topically administered drugs. Tazarotene, a receptor-selective, third-generation retinoid, is commonly used to treat acne vulgaris and psoriasis. In the present study, an in-depth analysis of the photostability of tazarotene in ethanolic solution in the presence of zinc oxide and/or titanium dioxide as well as benzophenone-type UV filters was performed. Eleven presumed products were derived from the photocatalytic degradation of tazarotene using ultra-performance liquid chromatography–tandem mass spectrometry, and transformation pathways were proposed. The degradation process mainly affected the 4,4-dimethyl-3,4-dihydro-2H-thiopyran moiety. The fragments most susceptible to oxidation were the methyl groups and the sulfur atom. Moreover, in the presence of sulisobenzone, under UV irradiation, tazarotene was subjected to a degradation process, which resulted in two photodecomposition products. In silico studies performed by OSIRIS Property Explorer demonstrated that five of the degradation products could be harmful in terms of the reproductive effects, which are associated with 3,4-dihydro-6-methyl-2H-1-benzothiopyran 1,1-dioxide, while one of them demonstrated potential irritant activity. The cytotoxic properties of the degradation products of tazarotene were assessed by MTT assay on a panel of human adherent cancer cells. Time- and concentration-dependent growth inhibition was evidenced in ovary (A2780) and breast (MDA-MB-231) cancer cell lines. The potential implication of the outcomes of the present research requires further studies mainly concerning the photostability of tazarotene in the topical formulations.

Recent Advances Regarding the Therapeutic Potential of Adapalene

Adapalene (ADP) is a representative of the third retinoids generation and successfully used in first-line acne treatment. ADP binds to retinoic acid nuclear receptors. The comedolytic, anti-inflammatory, antiproliferative, and immunomodulatory are the known ADP effects. Its safety profile is an advantage over other retinoids. ADP recently was found to be effective in the treatment of several dermatological diseases and photoaging besides the utility in the treatment of acne vulgaris. New biological effects of adapalene with therapeutic potential are highlighted in this review paper. Thus, adapalene could be a valuable therapeutic drug into the treatment of several types of cancer. Additionally, some neurodegenerative diseases could be treated with a suitable formulation for intravenous administration. The antibacterial activity against methicillin-resistant Staphylococcus aureus of an analogue of ADP has been proven. In different therapeutic schemes, ADP is more effective in combination with other active substances. New topical combinations with adapalene include ketoconazole (antifungal), mometasone furoate (anti-inflammatory corticosteroid), nadifloxacin (fluoroquinolone), and alfa and beta hydroxy acids. Combination with oral drugs is a new trend that enhances the properties of topical formulations with adapalene. Several studies have investigated the effects of ADP in co-administration with azithromycin, doxycycline, faropenem, isotretinoin, and valganciclovir. Innovative formulations of ADP also aim to achieve a better bioavailability, increased efficacy, and reduced side effects. In this review, we have highlighted the current studies on adapalene regarding biological effects useful in various treatment types. Adapalene has not been exploited yet to its full biological potential.

Polymeric Bioadhesive Patch Based on Ketoprofen-Hydrotalcite Hybrid for Local Treatments

Ketoprofen (KET) represents one of the most common drugs used in the topical treatment of pain and inflammations. However, its potential is rather limited due to the very low solubility and photochemical instability. The local administration of KET by conventional products, such as gels, emulgels, creams, and foams, does not guarantee an efficacious and safe treatment because of its low absorption (due to low solubility) and its sensitivity to UV rays. The photodegradation of KET makes many photoproducts responsible for different adverse effects. In the present work, KET was intercalated into the lamellar anionic clay ZnAl-hydrotalcite (ZnAl-HTlc), obtaining the hybrid ZnAl-KET with improved stability to UV rays and water solubility in comparison to the crystalline form (not intercalated KET). The hybrid was then formulated in autoadhesive patches for local pain treatment. The patches were prepared by casting method starting from a hydrogel based on the biocompatible and bioadhesive polymer NaCMC (Sodium carboxymethycellulose) and glycerol as a plasticizing agent. The introduction of ZnAl-KET in the patch composition demonstrated the improvement in the mechanical properties of the formulation. Moreover, a sustained and complete KET release was obtained within 8 h. This allowed reducing the frequency of anti-inflammatory administration, compared to the conventional formulations.

Photodegradation of the H1 Antihistaminic Topical Drugs Emedastine, Epinastine, and Ketotifen and ROS Tests for Estimations of Their Potent Phototoxicity

In this study, important H₁ antihistaminic drugs, i.e., emedastine (EME), epinastine (EPI), and ketotifen (KET), were irradiated with UV/Vis light (300–800 nm) in solutions of different pH values. Next, they were analyzed by new high performance liquid chromatography (HPLC) methods, in order to estimate the percentage of degradation and respective kinetics. Subsequently, ultra-performance liquid chromatography tandem-mass spectrometry (UPLC-MS/MS) was used to identify their photodegradation products and to propose degradation pathways. In addition, the peroxidation of linoleic acid and generation of singlet oxygen (SO) and superoxide anion (SA) were examined, together with the molar extinction coefficient (MEC) evaluation, to estimate their phototoxic risk. The photodegradation of all EME, EPI, and KET followed pseudo first-order kinetics. At pH values of 7.0 and 10.0, EPI was shown to be rather stable. However, its photostability was lower at pH 3.0. EME was shown to be photolabile in the whole range of pH values. In turn, KET was shown to be moderately labile at pH 3.0 and 7.0. However, it degraded completely in the buffer of pH 10.0. As a result, several photodegradation products were separated and identified using the UPLC-MS/MS method. Finally, our ROS assays showed a potent phototoxic risk in the following drug order: EPI < EME < KET. All of these results may be helpful for manufacturing, storing, and applying these substantial drugs, especially in their ocular formulations.