Influence of Acetylated Annealed Starch on the Release of β-Escin from the Anionic and Non-Ionic Hydrophilic Gels

β-Escin: An Updated Review of Its Analysis, Pharmacology, Pharmacokinetics, and Toxicity

[Formula: see text]-Escin is an oleanane-type pentacyclic triterpenoid saponin extracted from the seeds of Aesculus hippocastanum (AH), which is more widely distributed. [Formula: see text]-Escin sodium has been approved by the American FDA for clinical usage. This paper is intended to summarize an updated and comprehensive review of the pharmacological activities, pharmacokinetic properties, toxicity, and analytical methods of [Formula: see text]-escin. Studies have shown that [Formula: see text]-escin has significant antitumor, antiviral, anti-inflammatory, and other activities alongside less adverse effects and higher safety than other compounds. The review shows that the pharmacological effects of [Formula: see text]-escin involve mechanisms such as ATM/[Formula: see text]H2AX, RhoA/Rock, GSK-3[Formula: see text]/[Formula: see text]-Catenin, HER2/HER3/Akt, and PI3K/Akt signaling pathways, and Cyclin A, p21[Formula: see text], survivin, Bcl-2, Mcl-1, Caspases, TGF-[Formula: see text], MMPs, and TNF-[Formula: see text] among other inflammatory factors. [Formula: see text]-Escin has significant cytotoxicity; the use of the chitosan/xanthan gum-based polyelectrolyte complexes PA1 and PC-11 to modify it not only to reduces its toxicity, but also improves its drug efficacy. Because of this, these compounds may become a new research hotspot. [Formula: see text]-Escin in vivo metabolism can be converted by the CYP1A2 enzyme in the intestinal flora to produce [Formula: see text]-escin, deacylated, deglycosylated, and 21[Formula: see text]-[Formula: see text]-crotonoyl-protoescin, and the binding rate of the plasma proteins is higher than 90%. These are mainly metabolized by the liver, kidneys, and other organs, and excreted in the form of urine and feces. The number of reports on the specific mediators of the metabolism of [Formula: see text]-escin and their mechanisms and metabolites is relatively small; furthermore, the results are vague. Therefore, a complete and in-depth exploration of the pharmacokinetic characteristics of [Formula: see text]-escin is needed to provide a more complete and effective theoretical reference for the study of its pharmacodynamic activity.

The interactions of model cationic drug with newly synthesized starch derivatives

Background and purpose

The aim of the work was to compare the interactions of three newly synthesized non-toxic starch derivatives, with varied anionic and non-ionic functional groups with methylene blue (MB) as a model cationic drug, and selection of starch derivative with highest affinity to the MB.

Experimental approach

The native potato starch (SN), modified via acetylation (SM1), esterification and crosslinking (SM2) and crosslinking (SM3), was evaluated in MB adsorption studies and assessed by FTIR, PXRD, and DSC.

Key results

The adsorption of MB on SM2 and SM3 matched the BET isotherm model, which confirmed physisorption on the low-porous surface. In the case of SM1, adsorption took place via electrostatic attraction between the heterogeneous adsorbent surface and the adsorbate, as demonstrated by the Freundlich plot. The FTIR confirmed vibrations assigned to N=C stretching bonds at 1600 cm-1 in the case of MB adsorbed on the SN and SM2. The most intense PXRD peaks belonged to SN and the least to SM2. In the DSC study, the thermal stability via ΔT was assessed, with SM2 of lowest ΔT value (179.8 °C).

Conclusion

SM2 presented the best adsorption capacity, followed by SM3 and the weakest SM1. The interactions were confirmed in the adsorption studies and may reflect applications of the modified starches as drug carriers. In the FTIR study, a probable interaction between the OH- groups of SM2 and N+ of MB was revealed. The most amorphous structure was shown for SM2, which was correlated with the lowest thermal stability provided by the DSC study.

Synthesis, Thermogravimetric Analysis, and Kinetic Study of Poly-N-Isopropylacrylamide with Varied Initiator Content

The thermal decomposition and kinetic parameters of four polymers, PN-1, PN-05, PN-01, and PN-005, were determined by thermogravimetry (TGA/DTG) under non-isothermal conditions. N-isopropylacrylamide (NIPA)-based polymers were synthesized by the surfactant-free precipitation polymerization (SFPP) with different concentrations of the anionic initiator potassium persulphate (KPS). Thermogravimetric experiments were carried out in the temperature range of 25-700 °C at four heating rates, 5, 10, 15, and 20 °C min^-1, under a nitrogen atmosphere. Poly NIPA (PNIPA) showed three stages of mass loss during the degradation process. The thermal stability of the test material was determined. Activation energy values were estimated using Ozawa, Kissinger, Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Friedman (FD) methods.

Escin's Multifaceted Therapeutic Profile in Treatment and Post-Treatment of Various Cancers: A Comprehensive Review

Although modern medicine is advancing at an unprecedented rate, basic challenges in cancer treatment and drug resistance remain. Exploiting natural-product-based drugs is a strategy that has been proven over time to provide diverse and efficient approaches in patient care during treatment and post-treatment periods of various diseases, including cancer. Escin-a plant-derived triterpenoid saponin-is one example of natural products with a broad therapeutic scope. Initially, escin was proven to manifest potent anti-inflammatory and anti-oedematous effects. However, in the last two decades, other novel activities of escin relevant to cancer treatment have been reported. Recent studies demonstrated escin's efficacy in compositions with other approved drugs to accomplish synergy and increased bioavailability to broaden their apoptotic, anti-metastasis, and anti-angiogenetic effects. Here, we comprehensively discuss and present an overview of escin's chemistry and bioavailability, and highlight its biological activities against various cancer types. We conclude the review by presenting possible future directions of research involving escin for medical and pharmaceutical applications as well as for basic research.

Modified Potato Starch as a Potential Retardant for Prolonged Release of Lidocaine Hydrochloride from Methylcellulose Hydrophilic Gel

The problem of drug delivery often concentrates on the prolongation of drug activity. Application of natural polymers which are biodegradable and inexpensive is in the interest of many researchers. The aim of this study was the application of newly synthesized starch derivatives as potential functional excipients proposed for hydrophilic gel with lidocaine hydrochloride (LH) to prolong drug release from the hydrogel matrix. In our study, we investigated the effect of starch modified with citric acid on the release kinetics of LH using UV-VIS and Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), as well as viscosity and pH measurements. We demonstrated the effectiveness of citric-acid-modified starch in prolonging the release of LH from methylcellulose gel.

Solid lipid nanoparticle delivery of rhynchophylline enhanced the efficiency of allergic asthma treatment via the upregulation of suppressor of cytokine signaling 1 by repressing the p38 signaling pathway

Allergic asthma is one of the most common chronic airway diseases, and there is still a lack of effective drugs for the treatment of allergic asthma. The purpose of this work is to formulate rhynchophylline (Rhy)-solid lipid nanoparticles (SLNs) to improve their therapeutic efficacy in a mice allergic model of asthma. A solvent injection method was employed to prepare the Rhy-SLNs. Physicochemical characterization of Rhy-SLNs was measured, and the release assessment was investigated, followed by the release kinetics. Next, a model of murine experimental asthma was established. Mice were subcutaneously injected with 20 μg ovalbumin mixed with 1 mg aluminum hydroxide on days 0, 14, 28, and 42 and administrated aerosolized 1% ovalbumin (w/v) by inhalation from day 21 to day 42. Mice were intraperitoneally injected with 20 mg/kg Rhy-SLNs or Rhy at one hour before the airway challenge with ovalbumin. The results showed that Rhy-SLNs revealed a mean particle size of 62.06 ± 1.62 nm with a zeta potential value of −6.53 ± 0.04 mV and 82.6 ± 1.8% drug entrapment efficiency. The release curve of Rhy-SLNs was much higher than the drug released in phosphate buffer saline at 0, 1, 1.5, 2, 4, or 6 h. Moreover, Rhy-SLNs exerted better effects on inhibiting ovalbumin-induced airway inflammation, oxidative stress, airway remodeling (including collagen deposition and mucus gland hyperplasia) than Rhy in murine experimental asthma. Subsequently, we found that Rhy-SLNs relieved allergic asthma via the upregulation of the suppressor of cytokine signaling 1 by repressing the p38 signaling pathway.

Mesoporous silica nanoparticles prepared by different methods for biomedical applications: Comparative study

In the current investigation, mesoporous silica nanoparticles were obtained by various techniques, namely sol-gel (S1), micro-emulsion (S2) and hydrothermal synthesis (S3). The effect of those methods on the final features of the obtained mesoporous silica nanoparticles was studied. The obtained nanoparticles were investigated by TEM, BET surface area, Zetasizer, XRD and FTIR. The preparation method effect was evaluated on the drug release behaviour using doxycycline hyclate as a model drug. In addition, the degree of their compatibility against Saos-2 cell line was also determined. The morphology and microstructure of silica nanoparticles were found to be dependent on the utilised method. Those techniques produced particles with particle sizes of 50, 30-20 and 15 nm and also surface areas of 111.04, 164 and 538.72 m2 /g, respectively, for S1, S2 and S3. However, different preparation methods showed no remarkable changes for the physical and chemical integrities. The drug release test showed faster release from S2 compared with S1 and S3, which make them more applicable in cases require large doses for short periods. However, the release behaviour of S3 was satisfied for treatments which require long period with relatively highest release rate. The preparation method influenced the cell viability as S1 and S2 showed acceptable cell cytotoxicity compared with S3.

Novel Gel Microemulsion as Topical Drug Delivery System for Curcumin in Dermatocosmetics

Gel microemulsion combines the advantages of the microemulsion, which can encapsulate, protect and deliver large quantities of active ingredients, and the gel, which is so appreciated in the cosmetic industry. This study aimed to develop and characterize new gel microemulsions suitable for topical cosmetic applications, using grape seed oil as the oily phase, which is often employed in pharmaceuticals, especially in cosmetics. The optimized microemulsion was formulated using Tween 80 and Plurol^® Diisostearique CG as a surfactant mix and ethanol as a co-solvent. Three different water-soluble polymers were selected in order to increase the viscosity of the microemulsion: Carbopol^® 980 NF, chitosan, and sodium hyaluronate salt. All used ingredients are safe, biocompatible and biodegradable. Curcumin was chosen as a model drug. The obtained systems were physico-chemically characterized by means of electrical conductivity, dynamic light scattering, polarized microscopy and rheometric measurements. Evaluation of the cytotoxicity was accomplished by MTT assay. In the final phase of the study, the release behavior of Curcumin from the optimized microemulsion and two gel microemulsions was evaluated. Additionally, mathematical models were applied to establish the kinetic release mechanism. The obtained gel microemulsions could be effective systems for incorporation and controlled release of the hydrophobic active ingredients.

The Annealing of Acetylated Potato Starch with Various Substitution Degrees

This study aimed to determine the effect of "annealing" acetylated potato starch with a homogenous granule size and various degrees of substitution on the thermal pasting characteristics (DSC), resistance to amylases, rheology of the prepared pastes, swelling power and dynamics of drug release. A fraction of large granules was separated from native starch with the sedimentation method and acetylated with various doses of acetic anhydride (6.5, 13.0 or 26.0 26 cm3/100 g starch). The starch acetates were then annealed at slightly lower temperatures than their pasting temperatures. The annealing process caused an almost twofold increase in the resistance to amylolysis and a threefold increase in the swelling power of the modified starch preparations. The heat of phase transition decreased almost two times and the range of starch pasting temperatures over two times, but the pasting temperature itself increased by ca. 10 °C. The 40 g/100 g addition of the modified starch preparation decreased the rate of drug release from a hydrogel by ca. one-fourth compared to the control sample.

Simultaneous Measurement of Temperature and Refractive Index Using High Temperature Resistant Pure Quartz Grating Based on Femtosecond Laser and HF Etching

The optical fiber temperature and refractive index sensor combined with the hollow needle structure for medical treatment can promote the standardization of traditional acupuncture techniques and improve the accuracy of body fluid analysis. A double-parameter sensor based on fiber Bragg grating (FBG) is developed in this paper. The sensor materials are selected through X-ray diffraction (XRD) analysis, and the sensor sensing principle is theoretically analyzed and simulated. Through femtosecond laser writing pure silica fiber, a high temperature resistant wavelength type FBG temperature sensor is obtained, and the FBG is corroded by hydrofluoric acid (HF) to realize a high-sensitivity intensity-type refractive index sensor. Because the light has dual characteristics of energy and wavelength, the sensor can realize simultaneous dual-parameter sensing. The light from the lead-in optical fiber is transmitted to the sensor and affected by temperature and refractive-index; then, the reflection peak is reflected back to the lead-out fiber by the FBG. The high temperature response and the refractive index response of the sensor were measured in the laboratory, and the high temperature characteristics of the sensor were verified in the accredited institute. It is demonstrated that the proposed sensor can achieve temperature sensing up to 1150 °C with the sensitivity of 0.0134 nm/°C, and refractive sensing over a refractive range of 1.333 to 1.4027 with the sensitivity of -49.044 dBm/RIU. The sensor features the advantages of two-parameter measurement, compact structure, and wide temperature range, and it exhibits great potential in acupuncture treatment.