Nanotechnologies: An Innovative Tool to Release Natural Extracts with Antimicrobial Properties

Targeted antibacterial and anticancer therapeutics: PEGylated liposomal delivery of turmeric and cinnamon extracts-in vitro and in vivo efficacy

OBJECTIVE

This study presents the characterization and evaluation of polyethylene glycol (PEG)-coated liposomal formulations loaded with turmeric (TUR) and cinnamon (CINN) extracts for the treatment of bacterial infections.

SIGNIFICANCE

TUR/CINN-loaded PEGylated liposomes enhance the antibacterial effects of TUR and CINN both in vitro and in vivo.

METHODS

PEGylated liposomes loaded with TUR and CINN were synthesized using the reverse-phase evaporation method and characterized by dynamic light scattering and spectrophotometry. The formulations were also evaluated for biocompatibility, permeability, and antibacterial efficacy in both in vitro and in vivo environments.

RESULTS

The nanoparticles, with dimensions ranging from 155 to 164 nm, exhibited consistent size distribution (polydispersity index (PDI) of 0.219 to 0.23), stable zeta potentials (-20 to -13 mV), and effective drug encapsulation rates (86.8% to 93.6%), suggesting their potential for targeted drug delivery. In vitro experiments demonstrated their biocompatibility (cell viability exceeding 75% at 40 µg/mL), permeability (transfer rates of 20.2% to 21.5%), antibacterial activity (minimum inhibitory concentrations of 8 to 64 µg/mL), and their ability to generate reactive oxygen species (1.2- to 2-fold increase compared to the control). In an in vivo murine model of Pseudomonas aeruginosa skin infections, significant reductions in viable bacterial counts were observed, with PEG-Lip-TUR/CINN leaving only 102 colony-forming units/mL. Additionally, this formulation displayed anti-metastatic properties, inhibiting cancer cell migration by 99%.

CONCLUSIONS

This study highlights the potential of PEGylated liposomal formulations loaded with TUR and CINN as versatile therapeutic platforms for the treatment of antibiotic-resistant infections and cancer metastasis.

Potential of Chitosan/Gelatin-Based Nanofibers in Delivering Drugs for the Management of Varied Complications: A Review

Drug delivery systems have revolutionized traditional drug administration methods by addressing various challenges, such as enhancing drug solubility, prolonging effectiveness, minimizing adverse effects, and preserving potency. Nanotechnology-based drug delivery systems, particularly nanoparticles (NPs) and nanofibers (NFs), have emerged as promising solutions for biomedicine delivery. NFs, with their ability to mimic the porous and fibrous structures of biological tissues, have garnered significant interest in drug-delivering applications. Biopolymers such as gelatin (Ge) and chitosan (CH) have gained much more attention due to their biocompatibility, biodegradability, and versatility in biomedical applications. CH exhibits exceptional biocompatibility, anti-bacterial activity, and wound healing capabilities, whereas Ge provides good biocompatibility and cell adhesion properties. Ge/CH-based NFs stimulate cellular connections and facilitate tissue regeneration owing to their structural resemblance to the extracellular matrix. This review explores the additive methods of preparation, including electrospinning, force pinning, and template synthesis, focusing on electrospinning and the factors influencing the fiber structure. The properties of Ge and CH, their role in drug release, formulation strategies, and characterization techniques for electrospun fibers are discussed. Furthermore, this review addresses applications in delivering active moieties in the management of orthopedics and wound healing with regulatory considerations, along with challenges related to them. Thus, the review aims to provide a comprehensive overview of the potential of Ge/CH-based NFs for drug delivery and biomedical applications.

Antimicrobial and acaricide sanitizer tablets produced by wet granulation of spray-dried soap and clove oil-loaded microemulsion

A novel sanitizer tablet containing clove essential oil (CO) microemulsion was developed. A preformulation study using nuclear magnetic resonance and thermal analyses showed component compatibility. The main components of the samples remained intact despite a color change, probably due to a strong acid-base interaction between eugenol and diethanolamine. The CO microemulsion showed acaricidal and larvicidal activities superior to the commercial product, with product efficacy of 99.9% and larvae mortality of 94%. Optimal spray-drying conditions were achieved with inlet and outlet temperatures of 50°C and 40°C, respectively, an aspiration rate of 1 m3 min⁻1, and a 0.25 L h⁻1 injection flow. The feed suspension comprised 50% (v/v) liquid soap, 37.5% (v/v) water, 12.5% (v/v) ethanol, and 5.0% (w/v) silica. This formulation and processing parameters allowed for successful free-flow powder formation, providing a suitable matrix for incorporating the CO microemulsion via wet granulation without heating. Finally, sanitizer tablets produced from such granules resulted in a uniform product with low weight variation (coefficient of variation of 0.15%), eugenol content of 95.5% ± 3.3, and friability of 0.58%. Furthermore, the tablets showed rapid aqueous dispersion, forming a colloidal system with particle sizes of 221 nm and a zeta potential of -17.2 mV. Antimicrobial activity tests demonstrated the effectiveness of the sanitizer tablet against bacteria and fungi, exhibiting comparable antimicrobial potency to isolated CO. Hence, the sanitizer tablet developed represents a promising candidate as a practical and efficient solution for pest control, offering strong antimicrobial and acaricidal activity.

Natural antibiotics against antimicrobial resistance: sources and bioinspired delivery systems

The current burden associated to multidrug resistance, and the emerging superbugs, result in a decreased and even loss of antibiotic efficacy, which poses significant challenges in the treatment of infectious diseases. This situation has created a high demand for the discovery of novel antibiotics that are both effective and safe. However, while antibiotics play a crucial role in preventing and treating diseases, they are also associated with adverse effects. The emergence of multidrug-resistant and the extensive appearance of drug-resistant microorganisms, has become one of the major hurdles in healthcare. Addressing this problem will require the development of at least 20 new antibiotics by 2060. However, the process of designing new antibiotics is time-consuming. To overcome the spread of drug-resistant microbes and infections, constant evaluation of innovative methods and new molecules is essential. Research is actively exploring alternative strategies, such as combination therapies, new drug delivery systems, and the repurposing of existing drugs. In addition, advancements in genomic and proteomic technologies are aiding in the identification of potential new drug targets and the discovery of new antibiotic compounds. In this review, we explore new sources of natural antibiotics from plants, algae other sources, and propose innovative bioinspired delivery systems for their use as an approach to promoting responsible antibiotic use and mitigate the spread of drug-resistant microbes and infections.

Antimicrobial activity of nanoparticles based on carboxymethylated cashew gum and epiisopiloturine: In vitro and in silico studies

Epiisopiloturine (EPI) is a compound found in jaborandi leaves with antiparasitic activity, which can be enhanced when incorporated into nanoparticles (NP). Cashew Gum (CG), modified by carboxymethylation, is used to produce polymeric nanomaterials with biological activity. In this study, we investigated the antimicrobial potential of carboxymethylated CG (CCG) NP containing EPI (NPCCGE) and without the alkaloid (NPCCG) against bacteria and parasites of the genus Leishmania. We conducted theoretical studies, carboxymethylated CG, synthesized NP by nanoprecipitation, characterized them, and tested them in vitro. Theoretical studies confirmed the stability of modified carbohydrates and showed that the EPI-4A30 complex had the best interaction energy (-8.47 kcal/mol). CCG was confirmed by FT-IR and presented DSabs of 0.23. NPCCG and NPCCGE had average sizes of 221.94 ± 144.086 nm and 247.36 ± 3.827 nm, respectively, with homogeneous distribution and uniform surfaces. No NP showed antibacterial activity or cytotoxicity to macrophages. NPCCGE demonstrated antileishmanial activity against L. amazonensis, both in promastigote forms (IC50 = 9.52 μg/mL, SI = 42.01) and axenic amastigote forms (EC50 = 6.6 μg/mL, SI = 60.60). The results suggest that nanostructuring EPI in CCG enhances its antileishmanial activity.

Ultrasound assisted extraction and liposome encapsulation of olive leaves and orange peels: How to transform biomass waste into valuable resources with antimicrobial activity

Every year million tons of by-products and waste from olive and orange processing are produced by agri-food industries, thus triggering environmental and economic problems worldwide. From the perspective of a circular economy model, olive leaves and orange peels can be valorized in valuable products due to the presence of bioactive compounds such as polyphenols exhibiting beneficial effects on human health. The aqueous extracts of olive leaves and orange peels rich in phenolic compounds were prepared by ultrasound-assisted extraction. Both extracts were characterized in terms of yield of extraction, total phenolic content and antioxidant capacity; the polyphenolic profiles were deeper investigated by HPLC-MS analysis. Each extract was included in liposomes composed by a natural phospholipid, 1,2-dioleoyl-sn-glycero-3-phosphocholine,and cholesterol prepared according to the thin-layer evaporation method coupled with a sonication process. The antimicrobial activity of the extracts, free and loaded in liposomes, was investigated according to the broth macrodilution method against different strains of potential bacterial pathogenic species: Staphylococcus aureus (NCIMB 9518), Bacillus subtilis (ATCC 6051) and Enterococcus faecalis (NCIMB 775) as Gram-positive, while Escherichia coli (NCIMB 13302), Pseudomonas aeruginosa (NCIMB 9904) and Klebsiella oxytoca (NCIMB 12259) as Gram-negative. The encapsulation of olive leaves extract in liposomes enhanced its antibacterial activity against S. aureus by an order of magnitude.

Cellulosic Textiles-An Appealing Trend for Different Pharmaceutical Applications

Cellulose, the most abundant biopolymer in nature, is derived from various sources. The production of pharmaceutical textiles based on cellulose represents a growing sector. In medicated textiles, textile and pharmaceutical sciences are integrated to develop new healthcare approaches aiming to improve patient compliance. Through the possibility of cellulose functionalization, pharmaceutical textiles can broaden the applications of cellulose in the biomedical field. This narrative review aims to illustrate both the methods of extraction and preparation of cellulose fibers, with a particular focus on nanocellulose, and diverse pharmaceutical applications like tissue restoration and antimicrobial, antiviral, and wound healing applications. Additionally, the merging between fabricated cellulosic textiles with drugs, metal nanoparticles, and plant-derived and synthetic materials are also illustrated. Moreover, new emerging technologies and the use of smart medicated textiles (3D and 4D cellulosic textiles) are not far from those within the review scope. In each section, the review outlines some of the limitations in the use of cellulose textiles, indicating scientific research that provides significant contributions to overcome them. This review also points out the faced challenges and possible solutions in a trial to present an overview on all issues related to the use of cellulose for the production of pharmaceutical textiles.

Recent Progress and Trends in the Development of Electrospun and 3D Printed Polymeric-Based Materials to Overcome Antimicrobial Resistance (AMR)

Antimicrobial resistance (AMR) developed by microorganisms is considered one of the most critical public health issues worldwide. This problem is affecting the lives of millions of people and needs to be addressed promptly. Mainly, antibiotics are the substances that contribute to AMR in various strains of bacteria and other microorganisms, leading to infectious diseases that cannot be effectively treated. To avoid the use of antibiotics and similar drugs, several approaches have gained attention in the fields of materials science and engineering as well as pharmaceutics over the past five years. Our focus lies on the design and manufacture of polymeric-based materials capable of incorporating antimicrobial agents excluding the aforementioned substances. In this sense, two of the emerging techniques for materials fabrication, namely, electrospinning and 3D printing, have gained significant attraction. In this article, we provide a summary of the most important findings that contribute to the development of antimicrobial systems using these technologies to incorporate various types of nanomaterials, organic molecules, or natural compounds with the required property. Furthermore, we discuss and consider the challenges that lie ahead in this research field for the coming years.

Fast and convenient delivery of fluidextracts liquorice through electrospun core-shell nanohybrids

Introduction: As an interdisciplinary field, drug delivery relies on the developments of modern science and technology. Correspondingly, how to upgrade the traditional dosage forms for a more efficacious, safer, and convenient drug delivery poses a continuous challenge to researchers. Methods, results and discussion: In this study, a proof-of-concept demonstration was conducted to convert a popular traditional liquid dosage form (a commercial oral compound solution prepared from an intermediate licorice fluidextract) into a solid dosage form. The oral commercial solution was successfully encapsulated into the core-shell nanohybrids, and the ethanol in the oral solution was removed. The SEM and TEM evaluations showed that the prepared nanofibers had linear morphologies without any discerned spindles or beads and an obvious core-shell nanostructure. The FTIR and XRD results verified that the active ingredients in the commercial solution were compatible with the polymeric matrices and were presented in the core section in an amorphous state. Three different types of methods were developed, and the fast dissolution of the electrospun core-shell nanofibers was verified. Conclusion: Coaxial electrospinning can act as a nano pharmaceutical technique to upgrade the traditional oral solution into fast-dissolving solid drug delivery films to retain the advantages of the liquid dosage forms and the solid dosage forms.

Phytochemical-Based Nanomaterials against Antibiotic-Resistant Bacteria: An Updated Review

Antibiotic-resistant bacteria (ARB) is a growing global health threat, leading to the search for alternative strategies to combat bacterial infections. Phytochemicals, which are naturally occurring compounds found in plants, have shown potential as antimicrobial agents; however, therapy with these agents has certain limitations. The use of nanotechnology combined with antibacterial phytochemicals could help achieve greater antibacterial capacity against ARB by providing improved mechanical, physicochemical, biopharmaceutical, bioavailability, morphological or release properties. This review aims to provide an updated overview of the current state of research on the use of phytochemical-based nanomaterials for the treatment against ARB, with a special focus on polymeric nanofibers and nanoparticles. The review discusses the various types of phytochemicals that have been incorporated into different nanomaterials, the methods used to synthesize these materials, and the results of studies evaluating their antimicrobial activity. The challenges and limitations of using phytochemical-based nanomaterials, as well as future directions for research in this field, are also considered here. Overall, this review highlights the potential of phytochemical-based nanomaterials as a promising strategy for the treatment against ARB, but also stresses the need for further studies to fully understand their mechanisms of action and optimize their use in clinical settings.

Recent Progress of Electrospun Herbal Medicine Nanofibers

Herbal medicine has a long history of medical efficacy with low toxicity, side effects and good biocompatibility. However, the bioavailability of the extract of raw herbs and bioactive compounds is poor because of their low water solubility. In order to overcome the solubility issues, electrospinning technology can offer a delivery alternative to resolve them. The electrospun fibers have the advantages of high specific surface area, high porosity, excellent mechanical strength and flexible structures. At the same time, various natural and synthetic polymer-bound fibers can mimic extracellular matrix applications in different medical fields. In this paper, the development of electrospinning technology and polymers used for incorporating herbal medicine into electrospun nanofibers are reviewed. Finally, the recent progress of the applications of these herbal medicine nanofibers in biomedical (drug delivery, wound dressing, tissue engineering) and food fields along with their future prospects is discussed.

Utilisation of Mangifera indica plant extracts and parts in antimicrobial formulations and as a pharmaceutical excipient: a review

Background

Antimicrobial resistance and the environmental threat posed by some synthetic antimicrobial agents necessitate more research into development of novel pharmaceutical products that are environmentally friendly. Also, the use of plant derived excipients is growing and opening up new avenue to solve current drug delivery issues in the pharmaceutical industry.

Main body

This review summarizes studies related to the antimicrobial property of Mangifera indica extracts, possible mechanisms of antimicrobial action and antimicrobial formulations from the plant and overview of researches relating to the use of M. indica as a pharmaceutical excipient. Electronic searches were conducted on databases such as Pub Med, Wiley Online Library (WOL) and Google Scholar with focus on published articles relating to M. indica. Inclusion and exclusion criteria include publications relating to antimicrobial properties of M. indica extracts, its antimicrobial formulations and its use as a pharmaceutical excipient. The electronic searches yielded about 190 articles. From the studies reviewed, the mechanisms of action of phytochemicals described corroborate the antimicrobial activity exhibited by M. indica extracts and its selected formulations. In addition, mango pectin was observed to possess potential as a pharmaceutical excipient. Very few previous review articles based their focus on incorporating mechanism of action of phytochemicals with antimicrobial activity.This review examined antimicrobial properties of M. indica extracts and formulations, major phytochemicals in the plant parts and their possible modes of action. In addition, the study assessed the use of natural polymer derived from mango plant as excipients in pharmaceutical and pharmacological preparations.

Conclusion

The study concluded that effective antimicrobial activity of mango plant extracts and formulations requires synergy of actions among various phytochemical constituents of the extract or formulation. It is recommended that more researches focused on discovery of new phytochemicals in M. indica, their mechanisms of action and effective utilization of the plant in the pharmaceutical industry should be further explored.

Natural Additives Improving Polyurethane Antimicrobial Activity

In recent years, there has been a growing interest in using polymers with antibacterial and antifungal properties; therefore, the present review is focused on the effect of natural compounds on the antibacterial and antifungal properties of polyurethane (PUR). This topic is important because materials and objects made with this polymer can be used as antibacterial and antifungal ones in places where hygiene and sterile conditions are particularly required (e.g., in healthcare, construction industries, cosmetology, pharmacology, or food industries) and thus can become another possibility in comparison to commonly used disinfectants, which mostly show high toxicity to the environment and the human health. The review presents the possibilities of using natural extracts as antibacterial, antifungal, and antiviral additives, which, in contrast to the currently used antibiotics, have a much wider effect. Antibiotics fight bacterial infections by killing bacteria (bactericidal effect) or slowing and stopping their growth (bacteriostatic effect) and effect on different kinds of fungi, but they do not fight viruses; therefore, compounds of natural origin can find wide use as biocidal substances. Fungi grow in almost any environment, and they reproduce easily in dirt and wet spaces; thus, the development of antifungal PUR foams is focused on avoiding fungal infections and inhibiting growth. Polymers are susceptible to microorganism adhesion and, consequently, are treated and modified to inhibit fungal and bacterial growth. The ability of micro-organisms to grow on polyurethanes can cause human health problems during the use and storage of polymers, making it necessary to use additives that eliminate bacteria, viruses, and fungi.

A Tara Gum/Olive Mill Wastewaters Phytochemicals Conjugate as a New Ingredient for the Formulation of an Antioxidant-Enriched Pudding

Olive mill wastewater, a high polyphenols agro-food by-product, was successfully exploited in an eco-friendly radical process to synthesize an antioxidant macromolecule, usefully engaged as a functional ingredient to prepare functional puddings. The chemical composition of lyophilized olive mill wastewaters (LOMW) was investigated by HPLC-MS/MS and ¹H-NMR analyses, while antioxidant profile was in vitro evaluated by colorimetric assays. Oleuropein aglycone (5.8 μg mL^-1) appeared as the main compound, although relevant amounts of an isomer of the 3-hydroxytyrosol glucoside (4.3 μg mL^-1) and quinic acid (4.1 μg mL^-1) were also detected. LOMW was able to greatly inhibit ABTS radical (IC₅₀ equal to 0.019 mg mL^-1), displaying, in the aqueous medium, an increase in its scavenger properties by almost one order of magnitude compared to the organic one. LOMW reactive species and tara gum chains were involved in an eco-friendly grafting reaction to synthesize a polymeric conjugate that was characterized by spectroscopic, calorimetric and toxicity studies. In vitro acute oral toxicity was tested against 3T3 fibroblasts and Caco-2 cells, confirming that the polymers do not have any effect on cell viability at the dietary use concentrations. Antioxidant properties of the polymeric conjugate were also evaluated, suggesting its employment as a thickening agent, in the preparation of pear puree-based pudding. High performance of consistency and relevant antioxidants features over time (28 days) were detected in the milk-based foodstuff, in comparison with its non-functional counterparts, confirming LOWM as an attractive source to achieve high performing functional foods.

Phenolic-Rich Plant Extracts With Antimicrobial Activity: An Alternative to Food Preservatives and Biocides?

In recent years, the search for natural plant-based antimicrobial compounds as alternatives to some synthetic food preservatives or biocides has been stimulated by sanitary, environmental, regulatory, and marketing concerns. In this context, besides their established antioxidant activity, the antimicrobial activity of many plant phenolics deserved increased attention. Indeed, industries processing agricultural plants generate considerable quantities of phenolic-rich products and by-products, which could be valuable natural sources of natural antimicrobial molecules. Plant extracts containing volatile (e.g., essential oils) and non-volatile antimicrobial molecules can be distinguished. Plant essential oils are outside the scope of this review. This review will thus provide an overview of current knowledge regarding the promises and the limits of phenolic-rich plant extracts for food preservation and biofilm control on food-contacting surfaces. After a presentation of the major groups of antimicrobial plant phenolics, of their antimicrobial activity spectrum, and of the diversity of their mechanisms of action, their most promising sources will be reviewed. Since antimicrobial activity reduction often observed when comparing in vitro and in situ activities of plant phenolics has often been reported as a limit for their application, the effects of the composition and the microstructure of the matrices in which unwanted microorganisms are present (e.g., food and/or microbial biofilms) on their activity will be discussed. Then, the different strategies of delivery of antimicrobial phenolics to promote their activity in such matrices, such as their encapsulation or their association with edible coatings or food packaging materials are presented. The possibilities offered by encapsulation or association with polymers of packaging materials or coatings to increase the stability and ease of use of plant phenolics before their application, as well as to get systems for their controlled release are presented and discussed. Finally, the necessity to consider phenolic-rich antimicrobial plant extracts in combination with other factors consistently with hurdle technology principles will be discussed. For instance, several authors recently suggested that natural phenolic-rich extracts could not only extend the shelf-life of foods by controlling bacterial contamination, but could also coexist with probiotic lactic acid bacteria in food systems to provide enhanced health benefits to human.

Effects of Natural Antimicrobials on Xanthomonas Strains Growth

The aim of this work was to investigate the most promising natural antimicrobials effective for the growth suppression of Xanthomonas spp. bacteria. The research objects were Xanthomonas spp. strains isolated from tubers and stem of plants growing in Lithuania: Xanthomonas translucens NRCIB X6, X. arboricola NRCIB X7, NRCIB X8, NRCIB X9, and NRCIB X10; the supernatants of lactic acid bacteria Lactococcus lactis strains 140/2, 57, and 768/5, Lactobacillus helveticus strains 14, 148/3, R, and 3, Lb. reuteri 3 and 7, Streptococcus thermophilus 43, Enterococcus faecium 59-30 and 41-2; endophytic bacterial strains Bacillus, Pseudomonas, and Paenibacillus spp.; and essential oils of lavender (Lavandula angustifolia), grapefruit (Citrus paradisi), pine (Pinus sylvestris), thyme (Thymus vulgaris), rosemary (Rosmarinus officinalis), peppermint (Mentha piperita), lemon (Citrus limetta), aqueous extracts of blueberries (Vaccinium myrtillus), and cranberries (Vaccinium vitis-idaea). The antimicrobial activity of tested substances was determined by agar diffusion method. Supernatants of Lb. reuteri strain 7 and Lb. helveticus strains 14, R, 3, and 148/3 were found to have a high antimicrobial activity against Xanthomonas spp. bacteria strains when compared to the positive control—1.0% copper sulfate (diameter of inhibition zones was 28.8 ± 0.7 mm). The diameter of inhibition zones of supernatants ranged from 23.3 ± 0.6 mm to 32.0 ± 0.1 mm. Thyme (2.0%) and lavender (2.0%) essential oils inhibited the growth of Xanthomonas spp. strains. The diameter of the inhibition zones was from 14.7 ± 0.8 mm to 22.8 ± 0.9 mm. The aqueous extracts of blueberries had a weak antimicrobial activity. The diameter of inhibition zones ranged from 11.0 ± 0.2 mm to 13.0 ± 0.2 mm.