1
|
Pęczek E, Pamuła R, Białowiec A. Recycled Waste as Polyurethane Additives or Fillers: Mini-Review. MATERIALS (BASEL, SWITZERLAND) 2024; 17:1013. [PMID: 38473487 DOI: 10.3390/ma17051013] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/24/2024] [Revised: 02/19/2024] [Accepted: 02/20/2024] [Indexed: 03/14/2024]
Abstract
The intensive development of the polyurethanes industry and limited resources (also due to the current geopolitical situation) of the raw materials used so far force the search for new solutions to maintain high economic development. Implementing the principles of a circular economy is an approach aimed at reducing the consumption of natural resources in PU production. This is understood as a method of recovery, including recycling, in which waste is processed into PU, and then re-used and placed on the market in the form of finished sustainable products. The effective use of waste is one of the attributes of the modern economy. Around the world, new ways to process or use recycled materials for polyurethane production are investigated. That is why innovative research is so important, in which development may change the existing thinking about the form of waste recovery. The paper presents the possibilities of recycling waste (such as biochar, bagasse, waste lignin, residual algal cellulose, residual pineapple cellulose, walnut shells, silanized walnut shells, basalt waste, eggshells, chicken feathers, turkey feathers, fiber, fly ash, wood flour, buffing dust, thermoplastic elastomers, thermoplastic polyurethane, ground corncake, Tetra Pak®, coffee grounds, pine seed shells, yerba mate, the bark of Western Red Cedar, coconut husk ash, cuttlebone, glass fibers and mussel shell) as additives or fillers in the formulation of polyurethanes, which can partially or completely replace petrochemical raw materials. Numerous examples of waste applications of one-component polyurethanes have been given. A new unexplored niche for the research on waste recycling for the production of two components has been identified.
Collapse
Affiliation(s)
- Edyta Pęczek
- Department of Applied Bioeconomy, Wrocław University of Environmental and Life Sciences, 37a Chełmońskiego Str., 51-630 Wrocław, Poland
- Selena Industrial Technologies Sp. z o.o., Pieszycka 3, 58-200 Dzierżoniów, Poland
| | - Renata Pamuła
- Selena Industrial Technologies Sp. z o.o., Pieszycka 3, 58-200 Dzierżoniów, Poland
| | - Andrzej Białowiec
- Department of Applied Bioeconomy, Wrocław University of Environmental and Life Sciences, 37a Chełmońskiego Str., 51-630 Wrocław, Poland
| |
Collapse
|
2
|
Soykan U, Kaya S. Role of hemp fiber addition on thermal stability, heat insulation, air permeability and cellular structural features of rigid polyurethane foam. CELLULAR POLYMERS 2023. [DOI: 10.1177/02624893231152383] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
Abstract
In this current study, rigid polyurethane foams (RPUFs) composites were prepared using different percentage (3, 6, 9 and 12%) of the hemp fibers via one-shut one-step polymerization method. The influences of the hemp fiber addition on the RPUFs were investigated meticulously by means of Fourier-transform infrared spectroscopy (FTIR), thermo gravimetric analysis (TGA), thermal conductivity measurement and scanning electron microscopy (SEM) techniques by evaluating the alternations in the chemical structures of the component, thermal stability, apparent density, insulation performance and cellular topology of the produced samples. The structural analysis revealed that there existed the strong secondary chemical bonds between the functional groups belonging to the components and, depending on that, the improvement in the thermal stability of the foam samples was recorded accompanied by the formation of the better interfacial adhesion. Furthermore, thermal conductivity values of the hemp fiber-loaded RPUFs were observed to increase regularly with the increasing of the content level of the hemp fibers. This was explained by enhancement in the bulk phase conduction level depending of the apparent density rising, reduction in CO2 concentration inside cells as well as the formation of the distorted cellular structures. The obtained air permeability results displayed that the hemp fibers incorporated successfully with RPUF structure, which provides the occurrence of the novel micro barriers and pathways limiting the passage of the air throughout the matrix. The taken scanning electron microscopy images also indicated that the cellular morphology and dimensional stability of the produced foams affected negatively by the hemp fiber addition. At high contents, the wrinkled, non-uniform and irregular cellular structures were observed with ruptured and collapsed walls and struts.
Collapse
Affiliation(s)
- Ugur Soykan
- Yenicaga Yasar Celik Vocat. Sch., Bolu Abant Izzet Baysal University, Bolu, Turkey
- Nuclear Radiation Detectors Research and Development Center, Bolu, Turkey
| | - Senol Kaya
- Nuclear Radiation Detectors Research and Development Center, Bolu, Turkey
- Mehmet Tanrikulu Vocat. Sch. Hlth. Serv., Bolu Abant Izzet Baysal University, Bolu, Turkey
| |
Collapse
|
3
|
Soykan U, Khaleel M, Cetin S, Yahsi U, Tav C. Investigation of the relation between free volume and physico-mechanical performance in rigid polyurethane foam containing turkey feather fibers: Part 2. J CELL PLAST 2022. [DOI: 10.1177/0021955x221144541] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
Rigid polyurethane foams (RPUFs) were modified with 0–15 wt.% turkey feather fibers (TFFs) produced from waste turkey feathers. One-shut free rising method was used for the production of TFFs-filled-RPUFs in a closed mold. The dependence of mechanical performance and water vapor permeability (WVP) feature of the final foams on TFFs loading was evaluated with free volume change. The free volume analysis was performed via Positron Annihilation Lifetime Spectroscopy (PALS), while the mechanical and WVP characteristics were determined with the use of the universal tester machines. PALS findings showed that the incorporation of TFFs with RPUF matrix caused the considerable diminishment in the free volume due to TFFs serving as a filling material and formation of strong secondary bonds between components. Moreover, tensile strength and extension of the foams decreased with the increasing of TFFs, which caused by the occurrence of noteworthy restriction on the spatial alignment and orientation capability of polyurethane chains due to the lack of sufficient free volume allowing the chains to move freely. As for the compression tests, all the TFFs-loaded RPUFs depicted substantially lower performance due to TFFs interfering with the ordered organization of isocyanate domains. Moreover, impact test results showed that the addition of TFFs into RPUF matrix brought about the insufficient impact energy delocalization throughout the matrix due to the restriction on the mobility of polymer chains. Additionally, the remarkable diminishment in WVP was recorded due to the reduction in the number of vacancies and constitution of keratin composed of roundly 60% of hydrophilic protein (especially cystine). All in all, this study established a strong links between free volume and characteristics of TFFs-loaded RPUFs.
Collapse
Affiliation(s)
- Ugur Soykan
- Yenicaga Yasar Celik Vocational School, Bolu Abant Izzet Baysal University, Bolu, Turkey
| | - Mustafa Khaleel
- Departmant of Chemistry, Bolu Abant Izzet Baysal University, Bolu, Turkey
| | - Sedat Cetin
- Departmant of Chemistry, Bolu Abant Izzet Baysal University, Bolu, Turkey
| | - Ugur Yahsi
- Deparmant of Physics, Marmara University, Istanbul, Turkey
| | - Cumali Tav
- Deparmant of Physics, Marmara University, Istanbul, Turkey
| |
Collapse
|
4
|
Jóźwik-Pruska J, Wrześniewska-Tosik K, Mik T, Wesołowska E, Kowalewski T, Pałczyńska M, Walisiak D, Szalczyńska M. Biodegradable Nonwovens with Poultry Feather Addition as a Method for Recycling and Waste Management. Polymers (Basel) 2022; 14:polym14122370. [PMID: 35745946 PMCID: PMC9230047 DOI: 10.3390/polym14122370] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/11/2022] [Revised: 06/01/2022] [Accepted: 06/07/2022] [Indexed: 02/04/2023] Open
Abstract
Geotextiles are used for separation, drainage, filtration and anti-erosion protection sealing, as well as to improve plant vegetation conditions. The research objective of this study was to verify the influence of the addition of poultry feathers on accelerating the biodegradation of nonwovens in cultivated soil. The tests were carried out in laboratory conditions and were based on the assessment of weight loss. The experiments confirmed the positive effects of the presence of waste that was rich in keratin on the time required for the biodegradation of the tested materials (the period of biodegradation was 8–24 weeks). Additionally, the influence of the biodegradation of the tested materials on the ecotoxicity was investigated and showed no negative effects on the microbiological activity (106 cfu). The research also included the determination of the carbon to nitrogen ratio of the test medium (blank, 12–14:1; with feather addition, 19–20:1). A statistical analysis revealed a correlation between the mechanical properties and the period of biological decomposition. This research was an important step for the management of poultry feather waste in agricultural applications. The tested materials could be seen an alternative that meets all ecological criteria, which seems to be a golden solution that not only allows the delivery of important nutrients to the soil, but also manages waste in an environmentally safe manner.
Collapse
|
5
|
Wang Y, Cui K, Fang B, Wang F. Cost-Effective Fabrication of Modified Palygorskite-Reinforced Rigid Polyurethane Foam Nanocomposites. NANOMATERIALS 2022; 12:nano12040609. [PMID: 35214940 PMCID: PMC8876664 DOI: 10.3390/nano12040609] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/28/2021] [Revised: 01/27/2022] [Accepted: 02/07/2022] [Indexed: 01/19/2023]
Abstract
Integration of nanoclay minerals into rigid polyurethane foams (RPUFs) is a cost-effective solution to enhance foam’s performance via environmental protection technology. In this work, palygorskite/RPUFs nanocomposites (Pal/RPUFNs) with excellent mechanical properties and thermal stability were prepared via a one-step method, using 4,4’-diphenylmethane diisocyanate and polyether polyol as the starting materials, coupled with Pal modified by silane coupling agent KH570. The effects of the modified Pal on the mechanics, morphology, and thermal properties of the nanocomposites were studied systematically. When the content of the modified Pal was 8 wt% of polyether polyol, the elastic modulus and compressive strength of the Pal/RPUFNs were increased by ca. 131% and 97%, respectively. The scanning electron microscopy images indicated that the addition of the modified Pal significantly decreased the cell diameter of the Pal/RPUFNs. The results of thermogravimetric and derivative thermogravimetry analyses revealed that the addition of the modified Pal increased the thermal weight loss central temperature of the Pal/RPUFNs, showing better thermal stability in comparison with the pure RPUFs. A self-made evaluation device was used to estimate the thermal insulation ability of the Pal/RPUFNs. It was found that the small cell size and uniform cellular structure were keys to improving the thermal insulation performance of the RPUFs. The prepared Pal/RPUFNs are expected to have great potential in the field of building insulation.
Collapse
Affiliation(s)
- Yulei Wang
- Key Laboratory of Special Functional Materials for Ecological Environment and Information, Hebei University of Technology, Ministry of Education, Tianjin 300130, China; (Y.W.); (K.C.)
| | - Kaibin Cui
- Key Laboratory of Special Functional Materials for Ecological Environment and Information, Hebei University of Technology, Ministry of Education, Tianjin 300130, China; (Y.W.); (K.C.)
| | - Baizeng Fang
- Department of Chemical & Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, BC V6T 1Z3, Canada
- Correspondence: (B.F.); (F.W.)
| | - Fei Wang
- Key Laboratory of Special Functional Materials for Ecological Environment and Information, Hebei University of Technology, Ministry of Education, Tianjin 300130, China; (Y.W.); (K.C.)
- Correspondence: (B.F.); (F.W.)
| |
Collapse
|
6
|
Fabrication of castor oil-derived polyurethane mortar composites with energy saving and sound absorption characteristics. JOURNAL OF POLYMER RESEARCH 2021. [DOI: 10.1007/s10965-021-02836-z] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
|
7
|
Wen H, Wang M, Luo S, Zhou Y, Liu T. Aramid fiber reinforced
EPDM
microcellular foams: Influence of the aramid fiber content on rheological behavior, mechanical properties, thermal properties, and cellular structure. J Appl Polym Sci 2021. [DOI: 10.1002/app.50531] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Huayin Wen
- Institute of Chemical Materials China Academy of Engineering Physics Mianyang China
- Material Science and Engineering College Southwest University of Science and Technology Mianyang China
| | - Min Wang
- Institute of Chemical Materials China Academy of Engineering Physics Mianyang China
- Material Science and Engineering College Southwest University of Science and Technology Mianyang China
| | - Shikai Luo
- Institute of Chemical Materials China Academy of Engineering Physics Mianyang China
- Material Science and Engineering College Southwest University of Science and Technology Mianyang China
| | - Yuanlin Zhou
- Material Science and Engineering College Southwest University of Science and Technology Mianyang China
| | - Tao Liu
- Institute of Chemical Materials China Academy of Engineering Physics Mianyang China
| |
Collapse
|
8
|
Rostami-Tapeh-Esmaeil E, Vahidifar A, Esmizadeh E, Rodrigue D. Chemistry, Processing, Properties, and Applications of Rubber Foams. Polymers (Basel) 2021; 13:1565. [PMID: 34068238 PMCID: PMC8153173 DOI: 10.3390/polym13101565] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/25/2021] [Revised: 05/08/2021] [Accepted: 05/08/2021] [Indexed: 01/31/2023] Open
Abstract
With the ever-increasing development in science and technology, as well as social awareness, more requirements are imposed on the production and property of all materials, especially polymeric foams. In particular, rubber foams, compared to thermoplastic foams in general, have higher flexibility, resistance to abrasion, energy absorption capabilities, strength-to-weight ratio and tensile strength leading to their widespread use in several applications such as thermal insulation, energy absorption, pressure sensors, absorbents, etc. To control the rubber foams microstructure leading to excellent physical and mechanical properties, two types of parameters play important roles. The first category is related to formulation including the rubber (type and grade), as well as the type and content of accelerators, fillers, and foaming agents. The second category is associated to processing parameters such as the processing method (injection, extrusion, compression, etc.), as well as different conditions related to foaming (temperature, pressure and number of stage) and curing (temperature, time and precuring time). This review presents the different parameters involved and discusses their effect on the morphological, physical, and mechanical properties of rubber foams. Although several studies have been published on rubber foams, very few papers reviewed the subject and compared the results available. In this review, the most recent works on rubber foams have been collected to provide a general overview on different types of rubber foams from their preparation to their final application. Detailed information on formulation, curing and foaming chemistry, production methods, morphology, properties, and applications is presented and discussed.
Collapse
Affiliation(s)
| | - Ali Vahidifar
- Department of Polymer Science and Engineering, University of Bonab, Bonab 5551761167, Iran;
| | - Elnaz Esmizadeh
- Department of Polymer Science and Engineering, University of Bonab, Bonab 5551761167, Iran;
| | - Denis Rodrigue
- Department of Chemical Engineering, Université Laval, Quebec, QC G1V 0A6, Canada;
| |
Collapse
|
9
|
Członka S, Kairytė A, Miedzińska K, Strąkowska A. Polyurethane Hybrid Composites Reinforced with Lavender Residue Functionalized with Kaolinite and Hydroxyapatite. MATERIALS (BASEL, SWITZERLAND) 2021; 14:415. [PMID: 33467655 PMCID: PMC7829896 DOI: 10.3390/ma14020415] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/29/2020] [Revised: 01/11/2021] [Accepted: 01/14/2021] [Indexed: 02/06/2023]
Abstract
Polyurethane (PUR) composites were modified with 2 wt.% of lavender fillers functionalized with kaolinite (K) and hydroxyapatite (HA). The impact of lavender fillers on selected properties of PUR composites, such as rheological properties (dynamic viscosity, foaming behavior), mechanical properties (compressive strength, flexural strength, impact strength), insulation properties (thermal conductivity), thermal characteristic (temperature of thermal decomposition stages), flame retardancy (e.g., ignition time, limiting oxygen index, heat peak release) and performance properties (water uptake, contact angle) was investigated. Among all modified types of PUR composites, the greatest improvement was observed for PUR composites filled with lavender fillers functionalized with kaolinite and hydroxyapatite. For example, on the addition of functionalized lavender fillers, the compressive strength was enhanced by ~16-18%, flexural strength by ~9-12%, and impact strength by ~7%. Due to the functionalization of lavender filler with thermally stable flame retardant compounds, such modified PUR composites were characterized by higher temperatures of thermal decomposition. Most importantly, PUR composites filled with flame retardant compounds exhibited improved flame resistance characteristics-in both cases, the value of peak heat release was reduced by ~50%, while the value of total smoke release was reduced by ~30%.
Collapse
Affiliation(s)
- Sylwia Członka
- Institute of Polymer & Dye Technology, Lodz University of Technology, 90-924 Lodz, Poland; (K.M.); (A.S.)
| | - Agnė Kairytė
- Laboratory of Thermal Insulating Materials and Acoustics, Institute of Building Materials, Faculty of Civil Engineering, Vilnius Gediminas Technical University, Linkmenu st. 28, LT-08217 Vilnius, Lithuania;
| | - Karolina Miedzińska
- Institute of Polymer & Dye Technology, Lodz University of Technology, 90-924 Lodz, Poland; (K.M.); (A.S.)
| | - Anna Strąkowska
- Institute of Polymer & Dye Technology, Lodz University of Technology, 90-924 Lodz, Poland; (K.M.); (A.S.)
| |
Collapse
|
10
|
Composites of Semi-Rigid Polyurethane Foams with Keratin Fibers Derived from Poultry Feathers and Flame Retardant Additives. Polymers (Basel) 2020; 12:polym12122943. [PMID: 33317209 PMCID: PMC7764476 DOI: 10.3390/polym12122943] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/15/2020] [Revised: 12/04/2020] [Accepted: 12/07/2020] [Indexed: 12/02/2022] Open
Abstract
Semi-rigid composites of polyurethane foams (SRPUF) modified with the addition of keratin flour from poultry feathers and flame retardant additives were manufactured. Ten percent by mass of keratin fibers was added to the foams as well as halogen-free flame retardant additives such as Fyrol PNX, expandable graphite, metal oxides, in amounts such that their total mass did not exceed 15%. Thermal and mechanical properties were tested. Water absorption, dimensional stability, apparent density and flammability of produced foams were determined. It was found that the use of keratin fibers and flame retardant additives changes the foam synthesis process, changes their structure and properties as well as their combustion process. The addition of the filler made of keratin fibers significantly limits the amount of smoke generated during foam burning. The most favorable reduction of heat and smoke release rate was observed for foams with the addition of 10% keratin fibers and 10% expandable graphite. Systems of reducing combustibility of polyurethane foams using keratin fillers are a new solution on a global scale.
Collapse
|
11
|
Członka S, Strąkowska A, Kairytė A. The Impact of Hemp Shives Impregnated with Selected Plant Oils on Mechanical, Thermal, and Insulating Properties of Polyurethane Composite Foams. MATERIALS 2020; 13:ma13214709. [PMID: 33105707 PMCID: PMC7659977 DOI: 10.3390/ma13214709] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/04/2020] [Revised: 10/20/2020] [Accepted: 10/20/2020] [Indexed: 01/13/2023]
Abstract
Polyurethane (PUR) foams reinforced with 2 wt.% hemp shives (HS) fillers were successfully synthesized. Three different types of HS fillers were evaluated—non-treated HS, HS impregnated with sunflower oil (SO) and HS impregnated with tung oil (TO). The impact of each type of HS fillers on cellular morphology, mechanical performances, thermal stability, and flame retardancy was evaluated. It has been shown that the addition of HS fillers improved the mechanical characteristics of PUR foams. Among all modified series, the greatest improvement was observed after the incorporation of non-treated HS filler—when compared with neat foams, the value of compressive strength increased by ~13%. Moreover, the incorporation of impregnated HS fillers resulted in the improvement of thermal stability and flame retardancy of PUR foams. For example, the addition of both types of impregnated HS fillers significantly decreased the value of heat peak release (pHRR), total smoke release (TSR), and limiting oxygen index (LOI). Moreover, the PUR foams containing impregnated fillers were characterized by improved hydrophobicity and limited water uptake. The obtained results confirmed that the modification of PUR foams with non-treated and impregnated HS fillers may be a successful approach in producing polymeric composites with improved properties.
Collapse
Affiliation(s)
- Sylwia Członka
- Institute of Polymer & Dye Technology, Lodz University of Technology, 90-924 Lodz, Poland;
- Correspondence:
| | - Anna Strąkowska
- Institute of Polymer & Dye Technology, Lodz University of Technology, 90-924 Lodz, Poland;
| | - Agnė Kairytė
- Laboratory of Thermal Insulating Materials and Acoustics, Institute of Building Materials, Faculty of Civil Engineering, Vilnius Gediminas Technical University, Linkmenu st. 28, LT-08217 Vilnius, Lithuania;
| |
Collapse
|
12
|
Chen X, Zhu J, Luo Y, Chen J, Ma X, Bukhvalov D, Liu H, Zhang M, Luo Z. Molecular dynamics simulation insight into the temperature dependence and healing mechanism of an intrinsic self-healing polyurethane elastomer. Phys Chem Chem Phys 2020; 22:17620-17631. [PMID: 32720967 DOI: 10.1039/d0cp03013a] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/21/2023]
Abstract
An intrinsic self-healing polyurethane (PU) elastomer was synthesized in our previous work. In this work, three-dimensional (3D) micro-crack models based on experimental samples were further introduced to investigate their self-healing behavior, mechanism, and temperature dependence by molecular dynamics (MD) simulations. In particular, the number, type, strength, and lifetime of hydrogen bonds as well as the microscopic behavior of molecular diffusion in the self-healing process were investigated. It was found that the self-healing capacity of PU mainly results from intermolecular electrostatic interactions, and the hydrogen bond plays a key role in electrostatic interactions. There is an optimum ratio of soft and hard segments at which the number of hydrogen bonds is appropriate and the self-healing capacity is optimum. Besides, the temperature has an optimal value at which the self-healing rate of PU is the fastest. The exchanges of hydrogen bonds, which endowed PU with self-healing capacity, were further revealed intuitively. We found that the exchanges of hydrogen bonds are reversible and more likely to occur on the urethane groups. This study deepened the understanding of the self-healing character of PU at the molecular level.
Collapse
Affiliation(s)
- Xianling Chen
- College of Science, Nanjing Forestry University, Nanjing 210037, P. R. China.
| | - Jing Zhu
- Tsinghua Univ, Dept Elect Engn, State Key Lab Power Syst, Beijing 100084, P. R. China
| | - Yanlong Luo
- College of Science, Nanjing Forestry University, Nanjing 210037, P. R. China. and Institute of Polymer Materials, Nanjing Forestry University, Nanjing 210037, P. R. China.
| | - Jun Chen
- College of Science, Nanjing Forestry University, Nanjing 210037, P. R. China.
| | - Xiaofeng Ma
- College of Science, Nanjing Forestry University, Nanjing 210037, P. R. China. and Institute of Polymer Materials, Nanjing Forestry University, Nanjing 210037, P. R. China.
| | - Danil Bukhvalov
- College of Science, Nanjing Forestry University, Nanjing 210037, P. R. China. and Institute of Polymer Materials, Nanjing Forestry University, Nanjing 210037, P. R. China.
| | - Haobei Liu
- China Building Material Federation, Beijing 100037, P. R. China
| | - Meng Zhang
- Institute of Chemical Industry of Forestry Products, CAF, Nanjing, 210042, P. R. China.
| | - Zhenyang Luo
- College of Science, Nanjing Forestry University, Nanjing 210037, P. R. China. and Institute of Polymer Materials, Nanjing Forestry University, Nanjing 210037, P. R. China.
| |
Collapse
|
13
|
Członka S, Strąkowska A, Pospiech P, Strzelec K. Effects of Chemically Treated Eucalyptus Fibers on Mechanical, Thermal and Insulating Properties of Polyurethane Composite Foams. MATERIALS 2020; 13:ma13071781. [PMID: 32290106 PMCID: PMC7179037 DOI: 10.3390/ma13071781] [Citation(s) in RCA: 30] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/20/2020] [Revised: 04/06/2020] [Accepted: 04/07/2020] [Indexed: 02/05/2023]
Abstract
In this work, rigid polyurethane (PUR) foams were prepared by incorporating 2 wt% of eucalyptus fibers. The eucalyptus fibers were surface-modified by maleic anhydride, alkali, and silane (triphenylsilanol) treatment. The impact of the modified eucalyptus fibers on the mechanical, thermal, and fire performances of polyurethane foams was analyzed. It was observed that the addition of eucalyptus fibers showed improved mechanical and thermal properties and the best properties were shown by silane-treated fibers with a compressive strength of 312 kPa and a flexural strength of 432 kPa. Moreover, the thermal stability values showed the lowest decline for polyurethane foams modified with the silane-treated fibers, due to the better thermal stability of such modified fibers. Furthermore, the flame resistance of polyurethane foams modified with the silane-treated fibers was also the best among the studied composites. A cone calorimetry test showed a decrease in the peak of heat release from 245 to 110 kW∙m−2 by the incorporation of silane-treated fibers. Furthermore, total heat release and total smoke release were also found to decrease remarkably upon the incorporation of silane-treated fibers. The value of limiting oxygen index was increased from 20.2% to 22.1%. Char residue was also found to be increased from 24.4% to 28.3%. It can be concluded that the application of chemically modified eucalyptus fibers has great potential as an additive to incorporate good mechanical, thermal, and fire properties in rigid polyurethane foams.
Collapse
Affiliation(s)
- Sylwia Członka
- Institute of Polymer and Dye Technology, Faculty of Chemistry, Lodz University of Technology, Stefanowskiego 12/16, 90-924 Lodz, Poland; (A.S.); (K.S.)
- Correspondence:
| | - Anna Strąkowska
- Institute of Polymer and Dye Technology, Faculty of Chemistry, Lodz University of Technology, Stefanowskiego 12/16, 90-924 Lodz, Poland; (A.S.); (K.S.)
| | - Piotr Pospiech
- Centre of Papermaking and Printing, Lodz University of Technology, Wolczanska 223, 90-924 Lodz, Poland;
| | - Krzysztof Strzelec
- Institute of Polymer and Dye Technology, Faculty of Chemistry, Lodz University of Technology, Stefanowskiego 12/16, 90-924 Lodz, Poland; (A.S.); (K.S.)
| |
Collapse
|
14
|
Taghiyari HR, Majidi R, Esmailpour A, Samadi YS, Jahangiri A, Papadopoulos AN. Engineering Composites Made from Wood and Chicken Feather Bonded with UF Resin Fortified with Wollastonite: A Novel Approach. Polymers (Basel) 2020; 12:polym12040857. [PMID: 32272812 PMCID: PMC7240470 DOI: 10.3390/polym12040857] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/19/2020] [Revised: 03/31/2020] [Accepted: 04/06/2020] [Indexed: 01/25/2023] Open
Abstract
Wood-composite panel factories are in shortage of raw materials; therefore, finding new sources of fibers is vital for sustainable production. The effects of chicken feathers, as a renewable source of natural fibers, on the physicomechanical properties of medium-density fiberboard (MDF) and particleboard panels were investigated here. Wollastonite was added to resin to compensate possible negative effects of chicken feathers. Only feathers of the bodies of chickens were added to composite matrix at 5% and 10% content, based on the dry weight of the raw material, particles or fibers. Results showed significant negative effects of 10%-feather content on physical and mechanical properties. However, feather content of 5% showed some promising results. Addition of wollastonite to resin resulted in the improvement of some physical and mechanical properties. Wollastonite acted as reinforcing filler in resin and improved some of the properties; therefore, future studies should be carried out on the reduction of resin content. Moreover, density functional theory (DFT) demonstrated the formation of new bonds between wollastonite and carbohydrate polymers in the wood cell wall. It was concluded that chicken feathers have potential in wood-composite panel production.
Collapse
Affiliation(s)
- Hamid R. Taghiyari
- Wood Science and Technology Department, Faculty of Materials Engineering and New Technologies, Shahid Rajaee Teacher Training University, Tehran 1678815811, Iran;
- Correspondence: (H.R.T.); (A.N.P.)
| | - Roya Majidi
- Department of Physics, Faculty of Sciences, Shahid Rajaee Teacher Training University, Tehran 1678815811, Iran; (R.M.); (A.E.)
| | - Ayoub Esmailpour
- Department of Physics, Faculty of Sciences, Shahid Rajaee Teacher Training University, Tehran 1678815811, Iran; (R.M.); (A.E.)
| | - Younes Sarvari Samadi
- Faculty of Wood Technology and Construction, Rosenheim University of Applied Sciences, Rosenheim 83024, Germany;
| | - Asghar Jahangiri
- Wood Science and Technology Department, Faculty of Materials Engineering and New Technologies, Shahid Rajaee Teacher Training University, Tehran 1678815811, Iran;
| | - Antonios N. Papadopoulos
- Laboratory of Wood Chemistry and Technology, Department of Forestry and Natural Environment, International Hellenic University, GR-661 00 Drama, Greece
- Correspondence: (H.R.T.); (A.N.P.)
| |
Collapse
|