A Review on Molecularly Imprinted Polymers Preparation by Computational Simulation-Aided Methods

Diels-Alder clickable furan-thiosemicarbazide cellulose for selective ruthenium (III) imprinting

Developing an efficient adsorbent for Ru3+ ions in wastewater is crucial for both environmental protection and resource recovery. This study introduces a novel approach using cellulose-based adsorbents, specifically modified with furan-thiosemicarbazide (FTC), to enhance their selectivity for Ru3+ ions. By cross-linking the Ru3+/FTC-modified cellulose (FTC-CE) complex with a bis(maleimido)ethane (BME) cross-linker, we created a Ru3+ ion-imprinted sorbent (Ru-II-CE) that exhibits a strong affinity and selectivity for Ru3+ ions. The synthesis process was thoroughly characterized using NMR and FTIR spectroscopy, while the surface morphology of the sorbent particles was examined with scanning electron microscopy. The Ru-II-CE sorbent demonstrated exceptional selectivity for Ru3+ among competing metal cations, achieving optimal adsorption at a pH of 5. Its adsorption capacity was notably high at 215 mg/g, fitting well with the Langmuir isotherm model, and it followed pseudo-second-order kinetics. This study highlights the potential of FTC-CE for targeted Ru3+ removal from wastewater, offering a promising solution for heavy metal decontamination.

A surface molecularly imprinted microfluidic paper based device with smartphone assisted colorimetric detection for butachlor in mung bean

A microfluidic paper chip colorimetric detection system based on surface molecular imprinting of zinc ferrite nanoparticles was established, and the detection images were obtained by smartphone for gray value analysis and determination of butachlor. The best functional monomers and addition ratio were selected by quantum chemical simulation calculation, the properties of the prepared molecularly imprinted polymers were analyzed, and the detection conditions were optimized. The linear range, sensitivity, and selectivity of the method were evaluated. The results showed that under the optimum conditions, the concentration of 2-80 ng/g had a good linear relationship (R2 is 0.9953), the detection limit was 1.43 ng/g, the specificity was good, and the whole detection process did not exceed 20 min. The microfluidic paper chip was applied to detect butachlor in mung bean samples. The results showed that the recovery was 93.4-106.4 %, and the relative standard deviation was less than 5.6 %.

Eco-Friendly UV-Spectrophotometric Methods Employing Magnetic Nano-Composite Polymer for the Extraction and Analysis of Sexual Boosters in Adulterated Food Products: Application of Computer-Aided Design

BACKGROUND

Solid phase extraction (SPE) techniques, based on computationally designed magnetic-based multi-targeting molecular imprinted polymer (MT-MIP), combined with UV spectrophotometric approaches provide advantages in the examination of counterfeit samples.

OBJECTIVE

The current work describes an innovative and sustainable methodology for the simultaneous determination of tadalafil (TAD) and dapoxetine hydrochloride (DAP) in aphrodisiac counterfeit products (honey and instant coffee) utilizing SPE exploiting MT-MIP. Additionally, an innovative UV spectrophotometric method capable of resolving TAD in its pharmaceutical binary mixtures with DAP was developed. A novel computational approach was implemented to tailor the synthesis and design of the MT-MIP particles.

METHODS

We applied a newly developed UV spectrophotometric method which was based on a Fourier self-deconvolution (FSD) method coupled with the isoabsorptive point for determination of TAD and DAP in pharmaceutical dosage form. We also applied an SPE process based on MT-MIP designed particles, assisting in the analysis of both drugs in counterfeit food samples. The SPE process and the UV spectroscopic methodology were assessed regarding their greenness using the pioneering green analytical procedure index (GAPI), analytical greeness including sample preparation (AGREEprep) and AGREE tools. The synthesized MT-MIP particles were characterized by scanning electron microscopy and energy-dispersive x-ray spectroscopy.

RESULTS

The suggested spectrophotometric methods revealed a wide linear concentration range of 2-50 µg/mL with lower LODs in the range of 0.604-0.994 µg/mL. Additionally, the suggested method demonstrated the utmost sensitivity and eco-friendliness for their target in its mixed dosage form and counterfeit food products.

CONCLUSION

The SPE process and the developed analytical UV spectroscopic methodology were validated as per the ICH guidelines, and were found to be suitable for overseeing some counterfeiting activities in commercially available honey and instant coffee aphrodisiac products.

HIGHLIGHTS

An SPE method based on MT-MIP magnetic-based polymer and a UV spectroscopic method were successfully developed for analysis of TAD and DAP in different matrices.

Dual-template imprinted polymer electrochemical sensor for simultaneous determination of malathion and carbendazim using graphene quantum dots

Malathion (MAL) and carbendazim (CBZ) are organophosphate pesticides and fungicides, respectively. They are often used simultaneously in agriculture, and both have been shown to have harmful effects on humans and animals. Therefore, it is important to be able to measure both of these toxins simultaneously in order to assess their potential risks. This study aims to design a dual template electrochemical sensor using a cost-effective graphite-epoxy composite electrode (GECE) modified with molecularly imprinted polymers (MIPs) coated on graphene quantum dots (GQDs) for simultaneous detection of MAL and CBZ in real samples. GQDs were synthesized initially, and their surface was coated with MIPs that were formed using MAL and CBZ as the template molecules, ethylene glycol dimethyl acrylate as the cross-linker, and methacrylic acid as the functional monomer. The GQDs@MIP were characterized using Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, and X-ray scattering spectroscopy. Parameters affecting the sensor response, such as the percentage of GQDs@MIP in the fabricated electrode, the pH of the rebinding solution and analysis solution, and the incubation time, were optimized. The optimum pH values of the rebinding solution were verified using density functional theory (DFT) calculations. Under the optimized conditions, differential pulse voltammetry (DPV) response calibration curves of MAL and CBZ were generated, and the results showed that the sensor had a linear response to MAL in the range of 0.02-55.00 μM with a limit of detection (LOD) of 2 nM (S/N = 3) and to CBZ in the range of 0.02-45.00 μM with a low LOD of 1 nM (S/N = 3). The results also demonstrated the proposed sensor's long-term stability and anti-interference capability. The practical applicability of the fabricated electrode was evaluated for real sample analysis, and good recovery values were obtained.

Editorial: Advance in Molecularly Imprinted Polymers

Molecularly imprinted polymers (MIPs), due to their unique recognition properties, have found various applications, mainly in extraction and separation techniques; however, their implementation in other research areas, such as sensor construction and drug delivery, has also been substantial [...].

Strategy of Choosing Templates in Molecular Imprinting to Expand the Recognition Width for Family-Selectivity

The class-selective molecular-imprinted polymers (MIPs) have shown the recognition ability to multiple targeted molecules through using one or multiple templates. However, choosing the right templates, the core problem, still lacks a systemic guide and decision-making. In this work, we propose a strategy of selecting templates through expanding the recognition width for the improvement of class-selectivity. First, three families of genotoxic impurity (GTI) were selected as model objects, and the spatial size and binding energy of each GTI-monomer complexes were obtained and compared by computational simulation. The two indexes of energy width (W_E) and size width (W_L) were introduced to compare the similarity and differences on the two recognition factors, binding strength and spatial size, among these GTIs in each family. Through shortening the width to increase similarity on binding energy and size, the dual templates in the aromatic amines (AI) family and sulfonic acid esters (SI) family were successfully selected. Correspondingly, the prepared dual-template MIPs in the two GTI families can simultaneously recognize all the GTIs comparing with that of single template MIP, respectively. Meanwhile, through comparing the adsorption capacity of the selected template and its analogues in one GTI family, the recognition efficiency of the dual-template MIPs was higher than that of the single-template MIP. This indicates that though using the selected right templates, the higher class-selectivity and the larger recognition width can be realized. Thus, this work can solve the problem of blind template selection, and provide the useful theoretical guidance for designing family-selective molecular imprinting.

Preparation and Application Progress of Imprinted Polymers

Due to the specific recognition performance, imprinted polymers have been widely investigated and applied in the field of separation and detection. Based on the introduction of the imprinting principles, the classification of imprinted polymers (bulk imprinting, surface imprinting, and epitope imprinting) are summarized according to their structure first. Secondly, the preparation methods of imprinted polymers are summarized in detail, including traditional thermal polymerization, novel radiation polymerization, and green polymerization. Then, the practical applications of imprinted polymers for the selective recognition of different substrates, such as metal ions, organic molecules, and biological macromolecules, are systematically summarized. Finally, the existing problems in its preparation and application are summarized, and its prospects have been prospected.

Biomolecular Fishing: Design, Green Synthesis, and Performance of l-Leucine-Molecularly Imprinted Polymers

Biopurification is a challenging and growing market. Despite great efforts in the past years, current purification strategies still lack specificity, efficiency, and cost-effectiveness. The development of more sustainable functional materials and processes needs to address pressing environmental goals, efficiency, scale-up, and cost. Herein, l-leucine (LEU)-molecularly imprinted polymers (MIPs), LEU-MIPs, are presented as novel biomolecular fishing polymers for affinity sustainable biopurification. Rational design was performed using quantum mechanics calculations and molecular modeling for selecting the most appropriate monomers. LEU-MIPs were synthesized for the first time by two different green approaches, supercritical carbon dioxide (scCO₂) technology and mechanochemistry. A significant imprinting factor of 12 and a binding capacity of 27 mg LEU/g polymer were obtained for the LEU-MIP synthesized in scCO₂ using 2-vinylpyridine as a functional monomer, while the LEU-MIP using acrylamide as a functional monomer synthesized by mechanochemistry showed an imprinting factor of 1.4 and a binding capacity of 18 mg LEU/g polymer, both systems operating at a low binding concentration (0.5 mg LEU/mL) under physiological conditions. As expected, at a higher concentration (1.5 mg LEU/mL), the binding capacity was considerably increased. Both green technologies show high potential in obtaining ready-to-use, stable, and low-cost polymers with a molecular recognition ability for target biomolecules, being promising materials for biopurification processes.

In Vivo Applications of Molecularly Imprinted Polymers for Drug Delivery: A Pharmaceutical Perspective

Molecularly imprinted polymers (MIPs) have been proven to be a promising candidate for drug delivery systems (DDS) due to their ability to provide a sustained and controlled drug release, making them useful for treating a wide range of medical conditions. MIP-based DDS offer many advantages, including the administration of a smaller drug doses, due to the higher drug payload or targeted delivery, resulting in fewer side effects, as well as the possibility of attaining high concentrations of the drug in the targeted tissues. Whether designed as drug reservoirs or targeted DDS, MIPs are of great value to drug delivery as conventional drug formulations can be redesigned as DDS to overcome the active pharmaceutical ingredient's (APIs) poor bioavailability, toxic effects, or other shortcomings that previously made them less efficient or unsuitable for therapy. Therefore, MIP design could be a promising alternative to the challenging research and development of new lead compounds. Research on MIPs is primarily conducted from a material science perspective, which often overlooks some of their key pharmaceutical requirements. In this review, we emphasize the specific features that make MIPs suitable for clinical use, from both a material science and a biopharmaceutical perspective.

Molecularly Imprinted Nanoparticles towards MMP9 for Controlling Cardiac ECM after Myocardial Infarction: A Predictive Experimental-Computational Chemistry Investigation

The recent advances in nanotechnology are revolutionizing preventive and therapeutic approaches to treating cardiovascular diseases. Controlling the extracellular matrix metalloproteinase (MMP) activation and expression in the failing human left ventricular myocardium represents a significant therapeutic target for heart disease. In this study, we used molecularly imprinting polymers (MIPs) to restore the correct balance between MMPs and their tissue inhibitors (TIMPs), and explored the potential of this technique exhaustively through chemical synthesis, physicochemical and biological characterizations, and computational chemistry methods. By molecular dynamics simulations based on classical force fields, we simulated the early stages of the imprinting process in solution disclosing the pivotal interaction established between the monomers and the MMP9 protein template. The average interaction energies of methacrylic acid (MAA) and poly (ethylene glycol) ethyl ether methacrylate (PEG) units were in the ranges 17–22 and 30–37 kcal/mol, respectively. At low coverage, the PEG monomers seemed firmly anchored to the protein surface and were not displaced by water, while only about 20% of MAA was replaced by water. The synthesis of MIPs was successfully with a monomer conversion higher than 99% and the production of spherical particles with average diameter of 344 ± 33 nm. HPLC analysis showed a specific recognition factor of MMP9 on MIPs of about 1.3. FT-IR Chemical Imaging confirmed the mechanisms necessary to generate a “selective memory” of the MIPs towards the enzyme. HPLC results indicated that the rebound amount of both TIMP1 and MMP2 to MIPs is lower than that of the template, showing a selectivity factor of 2.1 and 2.3, respectively. Preliminary tests on the effect of MIPs on H9C2 cells revealed that this treatment has no cytotoxic effects.

Molecularly Imprinted Solid Phase Extraction Strategy for Quinic Acid

Quinic acid (QA) and its ester conjugates have been subjected to in-depth scientific investigations for their antioxidant properties. In this study, molecularly imprinted polymers (MIPs) were used for selective extraction of quinic acid (QA) from coffee bean extract. Computational modelling was performed to optimize the process of MIP preparation. Three different functional monomers (allylamine, methacrylic acid (MAA) and 4-vinylpyridine (4-VP)) were tested for imprinting. The ratio of each monomer to template chosen was based on the optimum ratio obtained from computational studies. Equilibrium rebinding studies were conducted and MIP C, which was prepared using 4-VP as functional monomer with template to monomer ratio of 1:5, showed better binding performance than the other prepared MIPs. Accordingly, MIP C was chosen to be applied for selective separation of QA using solid-phase extraction. The selectivity of MIP C towards QA was tested versus its analogues found in coffee (caffeic acid and chlorogenic acid). Molecularly imprinted solid-phase extraction (MISPE) using MIP C as sorbent was then applied for selective extraction of QA from aqueous coffee extract. The applied MISPE was able to retrieve 81.918 ± 3.027% of QA with a significant reduction in the amount of other components in the extract.

A Critical Review on the Use of Molecular Imprinting for Trace Heavy Metal and Micropollutant Detection

Molecular recognition has been described as the “ultimate” form of sensing and plays a fundamental role in biological processes. There is a move towards biomimetic recognition elements to overcome inherent problems of natural receptors such as limited stability, high-cost, and variation in response. In recent years, several alternatives have emerged which have found their first commercial applications. In this review, we focus on molecularly imprinted polymers (MIPs) since they present an attractive alternative due to recent breakthroughs in polymer science and nanotechnology. For example, innovative solid-phase synthesis methods can produce MIPs with sometimes greater affinities than natural receptors. Although industry and environmental agencies require sensors for continuous monitoring, the regulatory barrier for employing MIP-based sensors is still low for environmental applications. Despite this, there are currently no sensors in this area, which is likely due to low profitability and the need for new legislation to promote the development of MIP-based sensors for pollutant and heavy metal monitoring. The increased demand for point-of-use devices and home testing kits is driving an exponential growth in biosensor production, leading to an expected market value of over GPB 25 billion by 2023. A key requirement of point-of-use devices is portability, since the test must be conducted at “the time and place” to pinpoint sources of contamination in food and/or water samples. Therefore, this review will focus on MIP-based sensors for monitoring pollutants and heavy metals by critically evaluating relevant literature sources from 1993 to 2022.

Electropolymerized Molecularly Imprinted Polymer Synthesis Guided by an Integrated Data-Driven Framework for Cortisol Detection

Molecularly imprinted polymers (MIPs), often called "synthetic antibodies", are highly attractive as artificial receptors with tailored biomolecular recognition to construct biosensors. Electropolymerization is a fast and facile method to directly synthesize MIP sensing elements in situ on the working electrode, enabling ultra-low-cost and easy-to-manufacture electrochemical biosensors. However, due to the high dimensional design space of electropolymerized MIPs (e-MIPs), the development of e-MIPs is challenging and lengthy based on trial and error without proper guidelines. Leveraging machine learning techniques in building the quantitative relationship between synthesis parameters and corresponding sensing performance, e-MIPs' development and optimization can be facilitated. We herein demonstrate a case study on the synthesis of cortisol-imprinted polypyrrole for cortisol detection, where e-MIPs are fabricated with 72 sets of synthesis parameters with replicates. Their sensing performances are measured using a 12-channel potentiostat to construct the subsequent data-driven framework. The Gaussian process (GP) is employed as the mainstay of the integrated framework, which can account for various uncertainties in the synthesis and measurements. The Sobol index-based global sensitivity is then performed upon the GP surrogate model to elucidate the impact of e-MIPs' synthesis parameters on sensing performance and interrelations among parameters. Based on the prediction of the established GP model and local sensitivity analysis, synthesis parameters are optimized and validated by experiment, which leads to remarkable sensing performance enhancement (1.5-fold increase in sensitivity). The proposed framework is novel in biosensor development, which is expandable and also generally applicable to the development of other sensing materials.

Molecularly Imprinted Chitosan-Based Thin Films with Selectivity for Nicotine Derivatives for Application as a Bio-Sensor and Filter

This study reports the feasible use of chitosan as a thin film biosensor on the very sensitive quartz crystal micro balance system for detection of blends of multiple templates within a single matrix. The development of chitosan-based thin film materials with selectivity for nicotine derivatives is described. The molecular imprinting of a combination of nicotine derivatives in N-diacryloyl pipiradine-chitosan-methacrylic acid copolymer films on quartz crystal resonators was used to generate thin films with selectivity for nicotine and a range of nicotine analogues, particularly 3-phenylpyridine. The polymers were characterized by spectroscopic and microscopic evaluations; surface area, pore size, pore volume using Breuner-Emmet-Teller method. Temperature characteristics were also studied. The swelling and structure consistency of the Chitosan was achieved by grafting with methylmethacrylic acid and cross-linking with N-diacrylol pipiradine. A blend of 0.002 g (0.04 mmol) of Chitosan, 8.5 μL Methylmethacrylic Acid and 1.0 mg N-diacrylol pipradine (BAP) presented the best blend formulation. Detections were made within a time interval of 99 s, and blend templates were detected at a concentration of 0.5 mM from the Quartz crystal microbalance resonator analysis. The successful crosslinking of the biopolymers ensured successful control of the swelling and agglomeration of the chitosan, giving it the utility potential for use as thin film sensor. This successful crosslinking also created successful dual multiple templating on the chitosan matrix, even for aerosolized templates. The products can be used in environments with temperature ranges between 60 °C and 250 °C.