Conductive Polymers and Their Nanocomposites as Adsorbents in Environmental Applications

Recent developments in conductive polysaccharide adsorbent formulations for environmental remediation: A review

Environmental remediation is crucial for human life and ecosystems, involving the cleanup of contaminated water to protect health and restore ecological balance. However, rapid industrialization and population growth have worsened pollution, particularly in water bodies, making effective wastewater treatment a key challenge in ensuring clean drinking water, and the adsorption of toxic gases for air treatment are the main strategies for environmental remediation. Among the various treatment methods, adsorption stands out for its high selectivity, low energy and chemical use, ease of operation, and cost-effectiveness. To date, innovative, highly efficient, non-toxic, engineered adsorbent materials have received potential interest from scientific and governmental communities. Conducting polymer-modified polysaccharide formulations are crucial in wastewater treatment due to their high surface area, adsorption efficiency, excellent stability, and eco-friendly, biodegradable properties. This review offers an extensive overview of recent progress in synthesizing conducting polymer-modified polysaccharide formulations (hydrogels, aerogels, nanofibers, and nanocomposites) for capturing toxic heavy metal ions, organic dyes, pharmaceuticals, phenols as well as adsorbing different toxic gases using various adsorption mechanisms. It also emphasizes the integration of different nanofillers, including carbon-based materials, Mxenes, nanoclay, metal/metal oxides, and hybrid nanomaterials, into conductive polysaccharide chains to improve their physicochemical properties and adsorption efficiency. The reported data showed that these engineered adsorbent materials based on conductive polysaccharide formulations have immense potential for wastewater treatment applications, offering more effective and sustainable solutions.

A review on conducting organic polymers: Concepts, applications, and potential environmental benefits

Polymer materials have long been valued for their insulating properties. But recent advancements have revealed their potential as electrically conductive materials, offering an alternative to traditional metallic conductors with the added benefit of reduced environmental impact. This review article provides a comprehensive overview of conducting organic polymers, focusing on their conceptual foundations, diverse applications, and their significant role in mitigating environmental pollution. The paper begins with an exploration of how polymeric materials have progressed from insulators to conductors, explaining the basic principles and mechanisms behind their electrical conductivity. It then provides an insight into the various applications enabled by their unique optical and electronic properties, including their use in light-emitting diodes, electrochromic displays, smart windows, fuel cells, solar cells, supercapacitors and batteries. Additionally, the review emphasizes the potential of conducting organic polymers in mitigating environmental pollution, particularly through their role in wastewater treatment and e-waste management. By examining recent advancements and promising future prospects, this article underscores the potential of conducting organic polymers to revolutionize both electronic technology and environmental sustainability.

An immunosensor for the near real-time and site of inflammation detections of multiple proinflammatory cytokines

Diseases mediated by cytokine storms are often characterized by an overexuberant pace of pathogenesis accompanied by significant morbidity and mortality. Thus, near real-time (NRT) detections via a site-of-inflammation (SOI) sampling of proinflammatory cytokines are essential to ensure a timely and effective treatment of acute inflammations, which up to now, has not been fully possible. In this work, we proposed a novel NRT and SOI immunosensor using ZIF-8 signal amplification together with an off-on strategy. To achieve NRT detections via a SOI sampling, the body fluid of choice is the dermal interstitial fluid (ISF). The significant merits of ISF over blood are the quality, quantity and diversity of ISF-based biomarkers; the fluid is non-coagulating, making it feasible to perform multiple or continuous samplings and the sampling is minimally invasive. Our immunosensor requires only 5 μL of ISF to achieve a simultaneous detection of five highly potent proinflammatory cytokines: IL-6, IFN-γ, IL-1β, TNF-α, IP-10. We employed a microneedle array patch (MAP) together with a trifurcated nozzle pump to extract a mean volume of between 30 and 60 μL of ISF in 20 min. Under optimal conditions, the biosensor is capable of high-quality performance that exhibits a lower limit of detection (LOD) of 5.761 pg/mL over a wide linear range of 5.761-3 ‒ 20.00 ng/mL. We believe our immunosensor for NRT detections via a SOI sampling of ISF-biomarkers offers new theranostic opportunities that may not be possible with blood-based biomarkers.

Selective Adsorption Behavior of Sulfuric Acid Oxidized and Doped Conjugated Microporous Poly(aniline)s toward Lead Ions in an Aqueous Environment

The coexistence of lead, zinc, and copper ions in wastewater constitutes an environmental challenge of pressing concern. This research delves into the preparation of innovative oxidation-doped conjugated microporous poly(aniline) frameworks, exploring their prospective efficacy in regulating lead ion adsorption from aqueous solutions. H2SO4-CMPTA demonstrates the capability to reach adsorption equilibrium within 15 min at a lead concentration of 50 ppm. Even at a lead concentration of 20 ppm, it still efficaciously attenuates these levels to sub-10 ppb, a value surpassing extant standard. H2SO4-CMPTA retains over 78.8% adsorption efficiency after six cycles. Analytical characterization coupled with computational calculations suggests that sulfate-coordinated nitrogen cationic structure plays a crucial role in adsorption. A deeper investigation reveals the cardinal role of electrostatic attraction and exclusive chelation adsorption underpinning the efficient capture of lead ions by doped sulfate ions. Intriguingly, in a mixed heavy metal solution containing lead, zinc, and copper ions, H2SO4-CMPTA exhibits an initial predilection toward zinc ions, yet an eventual ion-exchange adsorption gravitating toward lead ions was discerned, governed by the latter's superior binding energy. Our study elucidates a promising material as an efficacious tool for the remediation of aquatic environments tainted with lead contaminants.

Advances in the Use of Conducting Polymers for Healthcare Monitoring

Conducting polymers (CPs) are an innovative class of materials recognized for their high flexibility and biocompatibility, making them an ideal choice for health monitoring applications that require flexibility. They are active in their design. Advances in fabrication technology allow the incorporation of CPs at various levels, by combining diverse CPs monomers with metal particles, 2D materials, carbon nanomaterials, and copolymers through the process of polymerization and mixing. This method produces materials with unique physicochemical properties and is highly customizable. In particular, the development of CPs with expanded surface area and high conductivity has significantly improved the performance of the sensors, providing high sensitivity and flexibility and expanding the range of available options. However, due to the morphological diversity of new materials and thus the variety of characteristics that can be synthesized by combining CPs and other types of functionalities, choosing the right combination for a sensor application is difficult but becomes important. This review focuses on classifying the role of CP and highlights recent advances in sensor design, especially in the field of healthcare monitoring. It also synthesizes the sensing mechanisms and evaluates the performance of CPs on electrochemical surfaces and in the sensor design. Furthermore, the applications that can be revolutionized by CPs will be discussed in detail.

Well-designed protein amyloid nanofibrils composites as versatile and sustainable materials for aquatic environment remediation: A review

Amyloid nanofibrils (ANFs) are supramolecular polymers originally classified as pathological markers in various human degenerative diseases. However, in recent years, ANFs have garnered greater interest and are regarded as nature-based sustainable biomaterials in environmental science, material engineering, and nanotechnology. On a laboratory scale, ANFs can be produced from food proteins via protein unfolding, misfolding, and hydrolysis. Furthermore, ANFs have specific structural characteristics such as a high aspect ratio, good rigidity, chemical stability, and a controllable sequence. These properties make them a promising functional material in water decontamination research. As a result, the fabrication and application of ANFs and their composites in water purification have recently gained considerable attention. Despite the large amount of literature in this field, there is a lack of systematic review to assess the gap in using ANFs and their composites to remove contaminants from water. This review discusses significant advancements in design techniques as well as the physicochemical properties of ANFs-based composites. We also emphasize the current progress in using ANFs-based composites to remove inorganic, organic, and biological contaminants. The interaction mechanisms between ANFs-based composites and contaminants are also highlighted. Finally, we illustrate the challenges and opportunities associated with the future preparation and application of ANFs-based composites. We anticipate that this review will shed new light on the future design and use of ANFs-based composites.

Sorption enhancement of Cr(VI) from aqueous solution by polyaniline confined in three-dimensional network of composite porous hydrogel

Hexavalent chromium Cr(VI) is a typical harmful pollutant, which is carcinogenic or mutagenic to aquatic animals and humans. In this study, sepiolite/humic acid/polyvinyl alcohol@ polyaniline (SC/HA/PVA@PANI) composite porous hydrogel adsorbent was synthesized by Pickering emulsion template in situ chemical oxidative polymerization for adsorption of Cr(VI) from aqueous solution. The in situ polymerization of aniline at the Pickering emulsion interface and the unique three-dimensional network structure of the hydrogel act as an effective "confinement" for the growth of the polymer. The porous structure of the material acts as a water channel, which effectively accelerates the binding of the adsorbate to the adsorption sites, and significantly improves the adsorption rate and adsorption capacity. The adsorption capacity of PANI for Cr(VI) confined in three-dimensional network of composite porous SC/HA/PVA@PANI hydrogel reached 1180.97 mg/g-PANI, which increased about 27-fold compared the adsorption capacity of pure PANI (43.48 mg/g). It is shown that the experimental design effectively avoids the agglomeration of PANI and improves its potential adsorption performance. In addition, the analysis of FESEM-EDX, FT-IR, and XPS spectra before and after adsorption confirmed that the main adsorption mechanisms of Cr(VI) on SC/HA/PVA@PANI included ion exchange, electrostatic attraction, and redox reaction. In conclusion, SC/HA/PVA@PANI has good stability and excellent adsorption performance, which is a new type of Cr(VI) ion adsorbent with great potential.

Formation Features of Polymer-Metal-Carbon Ternary Electromagnetic Nanocomposites Based on Polyphenoxazine

Novel ternary hybrid polyphenoxazine (PPOA)-derived nanocomposites involving Co-Fe particles and single-walled (SWCNTs) or multi-walled (MWCNTs) carbon nanotubes were prepared and investigated. An efficient one-pot method employing infrared (IR) heating enabled the formation of Co-Fe/CNT/PPOA nanocomposites. During this, the dehydrogenation of phenoxazine (POA) units led to the simultaneous reduction of metals by released hydrogen, yielding bimetallic Co-Fe particles with a size range from the nanoscale (5-30 nm) to the microscale (400-1400 nm). The synthesized Co-Fe/CNT/PPOA nanomaterials exhibited impressive thermal stability, demonstrating a half-weight loss at 640 °C and 563 °C in air for Co-Fe/SWCNT/PPOA and Co-Fe/MWCNT/PPOA, respectively. Although a slightly broader range of saturation magnetization values was obtained using MWCNTs, it was found that the type of carbon nanotube, whether an SWCNT (22.14-41.82 emu/g) or an MWCNT (20.93-44.33 emu/g), did not considerably affect the magnetic characteristics of the resulting nanomaterial. By contrast, saturation magnetization escalated with an increasing concentration of both cobalt and iron. These nanocomposites demonstrated a weak dependence of electrical conductivity on frequency. It is shown that the conductivity value for hybrid nanocomposites is higher compared to single-polymer materials and becomes higher with increasing CNT content.

Functional impacts of polyaniline in composite matrix of photocatalysts: an instrumental overview

The challenges associated with photocatalysts including their agglomeration, electron-hole recombination and limited optoelectronic reactivity to visible light during the photocatalysis of dye-laden effluent make it necessary to fabricate versatile polymeric composite photocatalysts, and in this case the incredibly reactive conducting polyaniline can be employed. The selection of polyaniline among the conducting polymers is based on its proficient functional impacts in composite blends and proficient synergism with other nanomaterials, especially semiconductor catalysts, resulting in a high photocatalytic performance for the degradation of dyes. However, the impacts of PANI in the composite matrix, which result in the desired photocatalytic activities, can only be assessed using multiple characterization techniques, involving both microscopic and spectroscopic assessment. The characterization results play a significant role in the detection of possible points of agglomeration, surface tunability and improved reactivity during the fabrication of composites, which are necessary to improve their performance in the photocatalysis of dyes. Accordingly, studies revealed the functional impacts of polyaniline in composites including morphological transformation, improved surface functionality, reduction in agglomeration and lowered bandgap potential employing different characterization techniques. In this review, we present the most proficient fabrication techniques based on the in situ approach to achieve improved functional and reactive features and efficiencies of 93, 95, 96, 98.6 and 99% for composites in dye photocatalysis.

Recent advances in conducting polymer-based magnetic nanosorbents for dyes and heavy metal removal: fabrication, applications, and perspective

Globally, treating and disposing of industrial pollutants is a techno-economic challenge. Industries' large production of harmful heavy metal ions (HMIs) and dyes and inappropriate disposal worsen water contamination. Much attention is required on the development of efficient and cost-effective technologies and approaches for removing toxic HMIs and dyes from wastewater as they pose a severe threat to public health and aquatic ecosystems. Due to the proven superiority of adsorption over other alternative methods, various nanosorbents have been developed for the efficient removal of HMIs and dyes from wastewater and aqueous solutions. Being a good adsorbent, conducting polymer-based magnetic nanocomposites (CP-MNCPs) has drawn more attention for HMIs and dye removal. Conductive polymers' pH-responsiveness makes CP-MNCP ideal for wastewater treatment. The composite material absorbed dyes and/or HMIs from contaminated water could be removed by changing the pH. Here, we review the production strategies and applications of CP-MNCPs for HMIs and dye removal. The review also sheds light on the adsorption mechanism, adsorption efficiency, kinetic and adsorption models, and regeneration capacity of the various CP-MNCPs. To date, various modifications to conducting polymers (CPs) have been explored to improve the adsorption properties. It is evident from the literature survey that the combination of SiO₂, graphene oxide (GO), and multi-walled carbon nanotubes (MWCNTs) with CPs-MNCPs enhances the adsorption capacity of nanocomposites to a large extent, so future research should lean toward the development of cost-effective hybrid CPs-nanocomposites.

Research Progress of Treatment Technology and Adsorption Materials for Removing Chromate in the Environment

Cr is used extensively in industry, so the number of Cr (VI) hazards is increasing. The effective control and removal of Cr (VI) from the environment are becoming an increasing research priority. In order to provide a more comprehensive description of the research progress of chromate adsorption materials, this paper summarizes the articles describing chromate adsorption in the past five years. It summarizes the adsorption principles, adsorbent types, and adsorption effects to provide methods and ideas to solve the chromate pollution problem further. After research, it is found that many adsorbents reduce adsorption when there is too much charge in the water. Besides, to ensure adsorption efficiency, there are problems with the formability of some materials, which impact recycling.

Investigation of functional performance of treatment systems for textile wastewater in selected textile industries in Tanzania

Textile industrialization is an integral part of the economic growth in Tanzania. However, the corresponding wastewater from textile treatment processes consists of dyes and auxiliaries associated with acute toxicological impacts. This necessitates an investigation of the functional performance of the industrial treatment systems used before effluent discharge. The study primarily accesses the catalog of industrial dyes and the functionality of the treatment system at Arusha, Morogoro and Dar es Salaam vis-à-vis the effluent physicochemical properties. The analytical study reveals disperse (42%), vat (34%) and reactive (26%) as the most used industrial dyes. The physicochemical properties of the quantified wastewater reveal a significant amount of and phosphorus which was consequent to the high turbidity, biochemical oxygen demand (BOD) and chemical oxygen demand (COD) apart from the color at the different sampling points. Although the treatability of the wastewater was 90% efficient using an activated carbon system (237.33 ± 0.67 mg/L). Similarly, the use of aerated constructed wetlands shows efficiency in the remediation of the recalcitrant having a value of 12.13 ± 0.89^b mg/L (90%) and 13.22 ± 0.15^a mg/L (94%). Thereafter, needful recommendations were suggested based on the physicochemical properties of the textile wastewater and to improve the functionality of the treatment systems in the respective industries.

Polyaniline and Polyaniline-Based Materials as Sorbents in Solid-Phase Extraction Techniques

Polyaniline (PANI) is one of the best known and widely studied conducting polymers with multiple applications and unique physicochemical properties. Due to its porous structure and relatively high surface area as well as the affinity toward many analytes related to the ability to establish different types of interactions, PANI has a great potential as a sorbent in sample pretreatment before instrumental analyses. This study provides an overview of the applications of polyaniline and polyaniline composites as sorbents in sample preparation techniques based on solid-phase extraction, including conventional solid-phase extraction (SPE) and its modifications, solid-phase microextraction (SPME), dispersive solid-phase extraction (dSPE), magnetic solid-phase extraction (MSPE) and stir-bar sorptive extraction (SBSE). The utility of PANI-based sorbents in chromatography was also summarized. It has been shown that polyaniline is willingly combined with other components and PANI-based materials may be formed in a variety of shapes. Polyaniline alone and PANI-based composites were successfully applied for sample preparation before determination of various analytes, both metal ions and organic compounds, in different matrices such as environmental samples, food, human plasma, urine, and blood.

Adsorption Behavior of Methylene Blue Cationic Dye in Aqueous Solution Using Polypyrrole-Polyethylenimine Nano-Adsorbent

In this work, a polypyrrole-polyethyleneimine (PPy-PEI) nano-adsorbent was successfully synthesized for the removal of methylene blue (MB) from an aqueous solution. Synthetic dyes are among the most prevalent environmental contaminants. A new conducting polymer-based adsorbent called (PPy-PEI) was successfully produced using ammonium persulfate as an oxidant. The PEI hyper-branched polymer with terminal amino groups was added to the PPy adsorbent to provide more effective chelating sites for dyes. An efficient dye removal from an aqueous solution was demonstrated using a batch equilibrium technique that included a polyethyleneimine nano-adsorbent (PPy-PEI). The best adsorption parameters were measured at a 0.35 g dosage of adsorbent at a pH of 6.2 and a contact period of 40 min at room temperature. The produced PPy-PEI nano-adsorbent has an average particle size of 25–60 nm and a BET surface area of 17 m²/g. The results revealed that PPy-PEI nano-composite was synthesized, and adsorption was accomplished in the minimum amount of time. The maximum monolayer power, qmax, for MB was calculated using the isothermal adsorption data, which matched the Langmuir isotherm model, and the kinetic adsorption data, which more closely fitted the Langmuir pseudo-second-order kinetic model. The Langmuir model was used to calculate the maximum monolayer capacity, or qmax, for MB, which was found to be 183.3 mg g⁻¹. The as-prepared PPy-PEI nano-adsorbent totally removes the cationic dyes from the aqueous solution.

Novel Hybrid Nanomaterials Based on Poly-N-Phenylanthranilic Acid and Magnetic Nanoparticles with Enhanced Saturation Magnetization

A one-step preparation method for cobalt- and iron-containing nanomaterials based on poly-N-phenylanthranilic acid (P-N-PAA) and magnetic nanoparticles (MNP) was developed for the first time. To synthesize the MNP/P-N-PAA nanocomposites, the precursor is obtained by dissolving a Co (II) salt in a magnetic fluid based on Fe3O4/P-N-PAA with a core-shell structure. During IR heating of the precursor in an inert atmosphere at T = 700−800 °C, cobalt interacts with Fe3O4 reduction products, which results in the formation of a mixture of spherical Co-Fe, γ-Fe, β-Co and Fe3C nanoparticles of various sizes in the ranges of 20 < d < 50 nm and 120 < d < 400 nm. The phase composition of the MNP/P-N-PAA nanocomposites depends significantly on the cobalt concentration. The reduction of metals occurs due to the hydrogen released during the dehydrogenation of phenylenamine units of the polymer chain. The introduction of 10−30 wt% cobalt in the composition of nanocomposites leads to a significant increase in the saturation magnetization of MNP/P-N-PAA (MS = 81.58−149.67 emu/g) compared to neat Fe3O4/P-N-PAA (MS = 18.41−27.58 emu/g). The squareness constant of the hysteresis loop is κS = MR/MS = 0.040−0.209. The electrical conductivity of the MNP/P-N-PAA nanomaterials does not depend much on frequency and reaches 1.2 × 10−1 S/cm. In the argon flow at 1000 °C, the residue is 77−88%.