Predicting the Mechanical Response of Polyhydroxyalkanoate Biopolymers Using Molecular Dynamics Simulations

Approaches to Control Crazing Deformation of PHA-Based Biopolymeric Blends

The mechanical behavior of polymer materials is heavily influenced by a phenomenon known as crazing. Crazing is a precursor to damage and leads to the formation of cracks as it grows in both thickness and tip size. The current research employs an in situ SEM method to investigate the initiation and progression of crazing in all-biopolymeric blends based on Polyhydroxyalkanoates (PHAs). To this end, two chemically different grades of PHA, namely poly(hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV), were melt-blended with polybutyrate adipate terephthalate (PBAT). The obtained morphologies of blends, the droplet/fibrillar matrix, were highly influenced by the plasticity of the matrices as well as the content of the minor phase. Increasing the concentration of PBAT from 15 to 30 wt.% resulted in the brittle to ductile transition. It changed the mechanism of plastic deformation from single craze-cracking to homogeneous and heterogeneous intensified crazing for PHB and PHBHV matrices, respectively. Homogeneous tensile crazes formed perpendicularly to the draw direction at the initial stages of deformation, transformed into shear crazes characterized by oblique edge propagation for the PHBHV/PBAT blend. Such angled crazes suggested that the displacement might be caused by shear localized deformation. The crazes' strength and the time to failure increased with the minor phase fibers. These fibers, aligned with the tensile direction and spanning the width of the crazes, were in the order of a few micrometers in diameter depending on the concentration. The network of fibrillar PBAT provided additional integrity for larger plastic deformation values. This study elucidates the mechanism of crazing in PHA blends and provides strategies for controlling it.

Modelling across Multiple Scales to Design Biopolymer Membranes for Sustainable Gas Separations: 1—Atomistic Approach

In this work, we assessed the CO2 and CH4 sorption and transport in copolymers of 3-hydroxybutyrate and 3-hydroxyvalerate (PHBV), which showed good CO2 capture potential in our previous papers, thanks to their good solubility–selectivity, and are potential biodegradable alternatives to standard membrane-separation materials. Experimental tests were carried out on a commercial material containing 8% of 3-hydroxyvalerate (HV), while molecular modelling was used to screen the performance of the copolymers across the entire composition range by simulating structures with 0%, 8%, 60%, and 100% HV, with the aim to provide a guide for the selection of the membrane material. The polymers were simulated using molecular dynamics (MD) models and validated against experimental density, solubility parameters, and X-ray diffraction. The CO2/CH4 solubility–selectivity predicted by the Widom insertion method is in good agreement with experimental data, while the diffusivity–selectivity obtained via mean square displacement is somewhat overestimated. Overall, simulations indicate promising behaviour for the homopolymer containing 100% of HV. In part 2 of this series of papers, we will investigate the same biomaterials using a macroscopic model for polymers and compare the accuracy and performance of the two approaches.

Novel Production Methods of Polyhydroxyalkanoates and Their Innovative Uses in Biomedicine and Industry

Polyhydroxyalkanoate (PHA), a biodegradable polymer obtained from microorganisms and plants, have been widely used in biomedical applications and devices, such as sutures, cardiac valves, bone scaffold, and drug delivery of compounds with pharmaceutical interests, as well as in food packaging. This review focuses on the use of polyhydroxyalkanoates beyond the most common uses, aiming to inform about the potential uses of the biopolymer as a biosensor, cosmetics, drug delivery, flame retardancy, and electrospinning, among other interesting uses. The novel applications are based on the production and composition of the polymer, which can be modified by genetic engineering, a semi-synthetic approach, by changing feeding carbon sources and/or supplement addition, among others. The future of PHA is promising, and despite its production costs being higher than petroleum-based plastics, tools given by synthetic biology, bioinformatics, and machine learning, among others, have allowed for great production yields, monomer and polymer functionalization, stability, and versatility, a key feature to increase the uses of this interesting family of polymers.