Scaffold Using Chitosan, Agarose, Cellulose, Dextran and Protein for Tissue Engineering-A Review

Chitosan/agarose-encapsulated oleic acid-coated magnetite nanoparticles as a chemotherapeutic-loaded scaffold for drug delivery: Physico-chemical and in vitro biological characteristics

Targeted drug delivery (TDD) offers a promising approach to address the limitations of conventional chemotherapy. This study presents a novel drug delivery system using a chitosan (CS)/agarose (AG) scaffold incorporating oleic acid-coated magnetite nanoparticles (MNPs/OA) for controlled doxorubicin release. Hydrothermally synthesized MNPs were functionalized with oleic acid, a biocompatible surfactant, to improve stability before incorporation into a chitosan-agarose (CS-AG) matrix. The formation of the composite AG-CS-MNPs/OA was characterized and verified using different methods, including Fourier-transform infrared spectroscopy (FT-IR), X-ray Diffraction (XRD), field emission scanning electron microscopy (FE-SEM), thermogravimetric analysis (TGA), and vibrating-sample magnetometer (VSM). Chitosan is a valuable biomaterial due to its pH sensitivity, natural origin, biodegradability, biocompatibility, and bio adhesive properties. In-vitro drug release experiments revealed a pH-dependent behavior, with increased DOX release observed under acidic conditions (pH = 4.5), which are characteristic of tumor sites, compared to a neutral (pH = 7.4). The release dynamics, best captured by the Korsmeyer-Peppas model, indicated a Fickian diffusion mechanism. Cytotoxicity assessments on MCF-7 breast cancer cells showed enhanced drug effectiveness at acidic pH, supporting the concept of targeted delivery. These findings suggest that the chitosan/agarose-magnetite scaffold is a promising candidate for pH-sensitive, controlled drug delivery, potentially enhancing cancer treatment by minimizing adverse effects on healthy tissues.

Biopolymer based Fibrous Aggregate Materials for Diagnosis and Treatment: Design, Manufacturing, and Applications

Biopolymer-based fibrous aggregate materials (BFAMs) have gained increasing attention in biomedicine due to their excellent biocompatibility, processability, biodegradability, and multifunctionality. Especially, the medical applications of BFAMs demand advanced structure, performance, and function, which conventional trial-and-error methods struggle to provide. This necessitates the rational selection of materials and manufacturing methods to design BFAMs with various intended functions and structures. This review summarizes the current progress in raw material selection, structural and functional design, processing technology, and application of BFAMs. Additionally, the challenges encountered during the development of BFAMs are discussed, along with perspectives for future research offered.

Bioengineering Approaches for Male Infertility: From Microenvironmental Regeneration to in vitro Fertilization

Male factor accounts for 30-50% of infertility cases and may occur due to congenital anomalies or acquired disorders. In such infertility cases where a limited number of mature sperm is produced, a solution is offered to patients with ART applications; however, these methods are inadequate in patients with germ cell aplasia due to damaged microenvironment. Since monolayer cell culture and static culture conditions do not provide the physical conditions of the 3D microenvironment, they have a limited effect on ensuring the execution of in vitro spermatogenesis properly. For this reason, current treatment approaches turn to biomaterial-implemented, microfluidic, and bioreactor systems where 3D physical conditions are provided. This book chapter focuses on static and dynamic culture conditions, as well as the use of biomaterials to increase the success of ex vivo spermatogenesis and microfluidic device-assisted sperm selection in ART.

State-of-the-Art Synthesis of Porous Polymer Materials and Their Several Fantastic Biomedical Applications: a Review

Porous polymers, including hydrogels, covalent organic frameworks (COFs), and hyper crosslinked polymers (HCPs), have become essential in biomedical research for their tunable pore architectures, large surface areas, and functional versatility. This review provides a comprehensive overview of their classification and updated synthesis mechanisms, such as 3D printing, electrospinning, and molecular imprinting. Their pivotal roles in drug delivery, tissue engineering, wound healing, and photodynamic/photothermal therapies, focusing on how pore size, distribution, and architecture impact drug release, cellular interactions, and therapeutic outcomes, are explored. Key challenges, including biocompatibility, mechanical strength, controlled degradation, and scalability, are critically assessed alongside emerging strategies to enhance clinical potential. Finally, recent challenges and future perspectives, emphasizing the broader biomedical applications of porous polymers, are addressed. This work provides valuable insights for advancing next-generation biomedical innovations through these materials.

Advances in agar-based composites: A comprehensive review

This review article explores the developments and applications in agar-based composites (ABCs), emphasizing various constituents such as metals, clay/ceramic, graphene, and polymers across diversified fields like wastewater treatment, drug delivery, food packaging, the energy sector, biomedical engineering, bioplastics, agriculture, and cosmetics. The focus is on agar as a sustainable and versatile biodegradable polysaccharide, highlighting research that has advanced the technology of ABCs. A bibliometric analysis is conducted using the Web of Science database, covering publications from January 2020 to March 2024, processed through VOSviewer Software Version 1.6.2. This analysis assesses evolving trends and scopes in the literature, visualizing co-words and themes that underscore the growing importance and potential of ABCs in various applications. This review paper contributes by showcasing the existing state-of-the-art knowledge and motivating further development in this promising field.

Fabrication of highly flexible biopolymeric chitosan/agarose based bioscaffold with Matricaria recutita herbal extract for antimicrobial wound dressing applications

A flexible biopolymer-based antimicrobial wound dressing has the potential to alleviate the burden of bacterial infections in wounds by enhancing antimicrobial effectiveness and promoting faster wound healing. This study focuses on the development of a highly flexible chitosan-agarose (CS-AG) bioscaffold, incorporating Matricaria recutita chamomile flower extract (CH) through a conventional casting method. The flexible CS-AG bioscaffold's physiochemical properties were confirmed by FTIR, indicating secondary interactions, and XRD, showing its crystalline structure. The addition of CH to the optimized CS-AG bioscaffold resulted in significant tensile strength (17.28 ± 0.33 MPa), distinctive structural morphology (SEM), surface roughness (AFM), contact angle, improved thermal properties (DSC), and enhanced thermal stability (TGA). Furthermore, the CH-infused bioscaffold significantly increased swelling capacity (~81.09 ± 1.74 % over 48 h), and degradation profile (~52 % over 180 h). The release studies of CS-AG-CH bioscaffold demonstrate controlled release of CH with in the bioscaffold at different pH conditions. The bioscaffold demonstrated effective antibacterial activity against S. aureus and E. coli strains. Additionally, cytotoxicity assays indicated that the bioscaffold supports better cell viability and proliferation in fibroblast (NIH 3T3) cell lines. Consequently, this antimicrobial bioscaffold shows promise as a drug release system and biocompatible wound dressing suitable for tissue engineering applications.

Nanoparticles in Bone Regeneration: A Narrative Review of Current Advances and Future Directions in Tissue Engineering

The rising demand for effective bone regeneration has underscored the limitations of traditional methods like autografts and allografts, including donor site morbidity and insufficient biological signaling. This review examines nanoparticles (NPs) in tissue engineering (TE) to address these challenges, evaluating polymers, metals, ceramics, and composites for their potential to enhance osteogenesis and angiogenesis by mimicking the extracellular matrix (ECM) nanostructure. The methods involved synthesizing and characterizing nanoparticle-based scaffoldsand integrating hydroxyapatite (HAp) with polymers to enhance mechanical properties and osteogenic potential. The results showed that these NPs significantly promote cell growth, differentiation, and bone formation, with carbon-based NPs like graphene and carbon nanotubes showing promise. NPs offer versatile, biocompatible, and customizable scaffolds that enhance drug delivery and support bone repair. Despite promising results, challenges with cytotoxicity, biodistribution, and immune responses remain. Addressing these issues through surface modifications and biocompatible molecules can improve the biocompatibility and efficacy of nanomaterials. Future research should focus on long-term in vivo studies to assess the safety and efficacy of NP-based scaffolds and explore synergistic effects with other bioactive molecules or growth factors. This review underscores the transformative potential of NPs in advancing BTE and calls for further research to optimize these technologies for clinical applications.

Effect of TEMPO-oxidized bacterial cellulose nanofibers stabilized Pickering emulsion of cinnamon essential oil on structure and properties of gelatin composite films

Pure gelatin film often exhibits high hydrophilicity and a lack of antibacterial activity, hindering its practical application in the field of food preservation. To address these issues, we incorporated 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized bacterial cellulose (TOBC) nanofibers stabilized cinnamon essential oil (CEO) Pickering emulsions into the gelatin matrix to develop active food packaging films. The study revealed that the good distribution of emulsion droplets in the film matrix. While with increasing Pickering emulsion proportion, the microstructures of composite films were more heterogeneous, showing some pores or cavities. In addition, the insertion of TOBC-stabilized CEO emulsions could improve the elongation at break (EAB), water-resistance, UV blocking ability, and antibacterial activity of film, but reduced its tensile strength (TS) and water vapor barrier properties (WVP). Notably, the film prepared with 4 % TOBC-stabilized CEO Pickering emulsion demonstrated enhanced preservation of strawberries. Overall, the as-prepared gelatin-based active composite films have considerable potential for food packaging.

Discovery and characterization of a novel carbohydrate-binding module: a favorable tool for investigating agarose

BACKGROUND

Agarose, mainly composed of 3,6-anhydro-α-l-galactopyranose (LA) and β-d-galactopyranose (G) units, is an important polysaccharide with wide applications in food, biomedical and bioengineering industries. Carbohydrate-binding modules (CBMs) are favorable tools for the investigations of polysaccharides. Few agarose-binding CBMs have been hitherto reported, and their binding specificity is unclear.

RESULTS

An unknown domain with a predicted β-sandwich fold was discovered from a β-agarase of the marine bacterium Wenyingzhuangia fucanilytica CZ1127T . The expressed protein WfCBM101 could bind to agarose and exhibited relatively weak affinity for porphyran, with no affinity for the other seven examined polysaccharides. The protein binds to the tetrasaccharide (LA-G)2 , but not to the major tetrasaccharide contained in porphyran. The sequence novelty and well-defined binding function of WfCBM101 shed light on a novel CBM family (CBM101). Furthermore, the feasibility of WfCBM101 for visualizing agarose in situ was confirmed.

CONCLUSION

A novel CBM, WfCBM101, with a desired specificity for agarose was discovered and characterized, which represents a new CBM family. The CBM could be utilized as a promising tool for studies of agarose. © 2023 Society of Chemical Industry.

Progress in advanced electrospun membranes for CO2 capture: Feedstock, design, and trend

The emission of large amounts of carbon dioxide has caused serious environmental problems and hindered the construction of a green and low-carbon society. Efficient carbon dioxide capture has become an important means to slow down global climate warming and achieve effective utilization of carbon dioxide. Membranes synthesized by electrospinning technology are becoming promising carbon capture materials due to their unique characteristics. This review describes the features of membranes prepared from available raw materials and presents their application performances in carbon capture. The preparation methods of various types of membrane materials with excellent capture performance are summarized, and the effects of electrospinning parameters on electrospun fibers are systematically analyzed. Furthermore, recommendations and expectations for further development of electrospun membranes for carbon capture applications are given. These works provide important references for an in-depth understanding of the development status of electrospun membranes in the field of carbon capture and for expanding future research.

Biomimetic mineralization of platelet lysate/oxidized dextran cryogel as a macroporous 3D composite scaffold for bone repair

Scaffold development approaches using autologous sources for tissue repair are of great importance in obtaining bio-active/-compatible constructs. Platelet-rich plasma (PRP) containing various growth factors and platelet lysate (PL) derived from PRP are autologous products that have the potential to accelerate the tissue repair response by inducing a transient inflammatory event. Considering the regenerative capacity of PRP and PL, PRP/PL-based scaffolds are thought to hold great promise for tissue engineering as a natural source of autologous growth factors and a provider of mechanical support for cells. Here, a bio-mineralized PRP-based scaffold was developed using oxidized dextran (OD) and evaluated for future application in bone tissue engineering. Prepared PL/OD scaffolds were incubated in simulated body fluid (SBF) for 7, 14 and 21 d periods. Mineralized PL/OD scaffolds were characterized using Fourier transform infrared spectroscopy, x-ray diffraction spectroscopy, scanning electron microscopy (SEM), thermogravimetric analysis, porosity and compression tests. SEM and energy-dispersive x-ray spectroscopy analyses revealed mineral accumulation on the PL/OD scaffold as a result of SBF incubation.In vitrocytotoxicity andin vitrohemolysis tests revealed that the scaffolds were non-toxic and hemocompatible. Additionally, human osteoblasts (hOBs) exhibited good attachment and spreading behavior on the scaffolds and maintained their viability throughout the culture period. The alkaline phosphatase activity assay and calcium release results revealed that PL/OD scaffolds preserved the osteogenic properties of hOBs. Overall, findings suggest that mineralized PL/OD scaffold may be a promising scaffold for bone tissue engineering.

Comprehensive Development of a Cellulose Acetate and Soy Protein-Based Scaffold for Nerve Regeneration

BACKGROUND

The elaboration of biocompatible nerve guide conduits (NGCs) has been studied in recent years as a treatment for total nerve rupture lesions (axonotmesis). Different natural polymers have been used in these studies, including cellulose associated with soy protein. The purpose of this report was to describe manufacturing NGCs suitable for nerve regeneration using the method of dip coating and evaporation of solvent with cellulose acetate (CA) functionalized with soy protein acid hydrolysate (SPAH).

METHODS

The manufacturing method and bacterial control precautions for the CA/SPAH NGCs were described. The structure of the NGCs was analyzed under a scanning electron microscope (SEM); porosity was analyzed with a degassing method using a porosimeter. Schwann cell (SCL 4.1/F7) biocompatibility of cell-seeded nerve guide conduits was evaluated with the MTT assay.

RESULTS

The method employed allowed an easy elaboration and customization of NGCs, free of bacteria, with pores in the internal surface, and the uniform wall thickness allowed manipulation, which showed flexibility; additionally, the sample was suturable. The NGCs showed initial biocompatibility with Schwann cells, revealing cells adhered to the NGC structure after 5 days.

CONCLUSIONS

The fabricated CA/SPAH NGCs showed adequate features to be used for peripheral nerve regeneration studies. Future reports are necessary to discuss the ideal concentration of CA and SPAH and the mechanical and physicochemical properties of this biomaterial.

Scaffold-mediated liver regeneration: A comprehensive exploration of current advances

The liver coordinates over 500 biochemical processes crucial for maintaining homeostasis, detoxification, and metabolism. Its specialized cells, arranged in hexagonal lobules, enable it to function as a highly efficient metabolic engine. However, diseases such as cirrhosis, fatty liver disease, and hepatitis present significant global health challenges. Traditional drug development is expensive and often ineffective at predicting human responses, driving interest in advanced in vitro liver models utilizing 3D bioprinting and microfluidics. These models strive to mimic the liver's complex microenvironment, improving drug screening and disease research. Despite its resilience, the liver is vulnerable to chronic illnesses, injuries, and cancers, leading to millions of deaths annually. Organ shortages hinder liver transplantation, highlighting the need for alternative treatments. Tissue engineering, employing polymer-based scaffolds and 3D bioprinting, shows promise. This review examines these innovative strategies, including liver organoids and liver tissue-on-chip technologies, to address the challenges of liver diseases.

Ice-Templated and Cross-Linked Xanthan-Based Hydrogels: Towards Tailor-Made Properties

The use of polysaccharides with good film-forming properties in food packaging systems is a promising area of research. Xanthan gum (XG), an extracellular polysaccharide, has many industrial uses, including as a common food additive (E415). It is an effective thickening agent, emulsifier, and stabilizer that prevents ingredients from separating. Nevertheless, XG-based polymer films have some disadvantages, such as poor mechanical properties and high hydrophilic features, which reduce their stability when exposed to moisture and create difficulties in processing and handling. Thus, the objective of this work was to stabilize a XG matrix by cross-linking it with glycerol diglycidyl ether, 1,4-butanediol diglycidyl ether, or epichlorohydrin below the freezing point of the reaction mixture. Cryogelation is an ecological, friendly, and versatile method of preparing biomaterials with improved physicochemical properties. Using this technique, XG-based cryogels were successfully prepared in the form of microspheres, monoliths, and films. The XG-based cryogels were characterized by FTIR, SEM, AFM, swelling kinetics, and compressive tests. A heterogeneous morphology with interconnected pores, with an average pore size depending on both the nature of the cross-linker and the cross-linking ratio, was found. The use of a larger amount of cross-linker led to both a much more compact structure of the pore walls and to a significant decrease in the average pore size. The uniaxial compression tests indicated that the XG-based cryogels cross-linked with 1,4-butanediol diglycidyl ether exhibited the best elasticity, sustaining maximum deformations of 97.67%, 90.10%, and 81.80%, respectively.

Nanofiber Scaffolds as Drug Delivery Systems Promoting Wound Healing

Nanofiber scaffolds have emerged as a revolutionary drug delivery platform for promoting wound healing, due to their unique properties, including high surface area, interconnected porosity, excellent breathability, and moisture absorption, as well as their spatial structure which mimics the extracellular matrix. However, the use of nanofibers to achieve controlled drug loading and release still presents many challenges, with ongoing research still exploring how to load drugs onto nanofiber scaffolds without loss of activity and how to control their release in a specific spatiotemporal manner. This comprehensive study systematically reviews the applications and recent advances related to drug-laden nanofiber scaffolds for skin-wound management. First, we introduce commonly used methods for nanofiber preparation, including electrostatic spinning, sol-gel, molecular self-assembly, thermally induced phase separation, and 3D-printing techniques. Next, we summarize the polymers used in the preparation of nanofibers and drug delivery methods utilizing nanofiber scaffolds. We then review the application of drug-loaded nanofiber scaffolds for wound healing, considering the different stages of wound healing in which the drug acts. Finally, we briefly describe stimulus-responsive drug delivery schemes for nanofiber scaffolds, as well as other exciting drug delivery systems.

Dextran Methacrylate Reactions with Hydroxyl Radicals and Hydrated Electrons in Water: A Kinetic Study Using Pulse Radiolysis

Dextran methacrylate (Dex-MA) is a biodegradable polysaccharide derivative that can be cross-linked by ionizing radiation. It is therefore considered a potential replacement for synthetic hydrophilic polymers in current radiation technologies used for synthesizing hydrophilic cross-linked polymer structures such as hydrogels, mainly for medical applications. This work is focused on the initial steps of radiation-induced cross-linking polymerization of Dex-MA in water. Rate constants of two major transient water radiolysis products-hydroxyl radicals (^•OH) and hydrated electrons (eaq-)-with various samples of Dex-MA (based on 6-500 kDa dextrans of molar degree of substitution or DS with methacrylate groups up to 0.66) as well as non-substituted dextran were determined by pulse radiolysis with spectrophotometric detection. It has been demonstrated that these rate constants depend on both the molecular weight and DS; reasons for these effects are discussed and reaction mechanisms are proposed. Selected spectral data of the transient species formed by ^•OH- and eaq--induced reactions are used to support the discussion. The kinetic data obtained in this work and their interpretation are expected to be useful for controlled synthesis of polysaccharide-based hydrogels and nanogels of predefined structure and properties.