Biomaterial Implants in Abdominal Wall Hernia Repair: A Review on the Importance of the Peritoneal Interface

A Review of Advanced Abdominal Wall Hernia Patch Materials

Tension-free abdominal wall hernia patch materials (AWHPMs) play an important role in the repair of abdominal wall defects (AWDs), which have a recurrence rate of <1%. Nevertheless, there are still significant challenges in the development of tailored, biomimetic, and extracellular matrix (ECM)-like AWHPMs that satisfy the clinical demands of abdominal wall repair (AWR) while effectively handling post-operative complications associated with abdominal hernias, such as intra-abdominal visceral adhesion and abnormal healing. This extensive review presents a comprehensive guide to the high-end fabrication and the precise selection of these advanced AWHPMs. The review begins by briefly introducing the structures, sources, and properties of AWHPMs, and critically evaluates the advantages and disadvantages of different types of AWHPMs for AWR applications. The review subsequently summarizes and elaborates upon state-of-the-art AWHPM fabrication methods and their key characteristics (e.g., mechanical, physicochemical, and biological properties in vitro/vivo). This review uses compelling examples to demonstrate that advanced AWHPMs with multiple functionalities (e.g., anti-deformation, anti-inflammation, anti-adhesion, pro-healing properties, etc.) can meet the fundamental clinical demands required to successfully repair AWDs. In particular, there have been several developments in the enhancement of biomimetic AWHPMs with multiple properties, and additional breakthroughs are expected in the near future.

Next generation meshes for hernia repair: Polypropylene meshes coated with antimicrobial benzalkonium chloride induced proliferative activity of fibroblasts

Hernia repair is one of the most frequently performed world-wide surgical procedures in which hernia meshes are becoming increasingly used. Polypropylene (PP) mesh implants reduce the risk of recurrence and post-operative pain, although many other risks are associated with it, such as bacterial infection. In this study we developed PP meshes coated with the well-known antimicrobial compound, benzalkonium chloride (BAK) by dip-coating. Several dilutions (40, 20, 30, 10, 7.5, 5, 2.5, 1, 0.5, 0.1 and 0.05 % v/v) of commercial BAK solution (BAK diluted in 70 % ethyl alcohol at 0.1 % w/v) were used to produce antimicrobial meshes with different amounts of BAK. The dip-coating treatment with low concentrations of BAK (1, 0.5, 0.1 and 0.05 % v/v dilutions) was found to have biocompatible results in fibroblast. The use of 0.1 and 0.05 % v/v dilutions (PP meshes with up to ∼2 % w/w of BAK) showed proliferative activity on fibroblast cells, indicating that these novel antimicrobial meshes show great promise for hernia repair due to their ability to prevent infections while inducing fibroblast proliferation.

A Review of Abdominal Meshes for Hernia Repair-Current Status and Emerging Solutions

Abdominal hernias are common issues in the clinical setting, burdening millions of patients worldwide. Associated with pain, decreased quality of life, and severe potential complications, abdominal wall hernias should be treated as soon as possible. Whether an open repair or laparoscopic surgical approach is tackled, mesh reinforcement is generally required to ensure a durable hernia repair. Over the years, numerous mesh products have been made available on the market and in clinical settings, yet each of the currently used meshes presents certain limitations that reflect on treatment outcomes. Thus, mesh development is still ongoing, and emerging solutions have reached various testing stages. In this regard, this paper aims to establish an up-to-date framework on abdominal meshes, briefly overviewing currently available solutions for hernia repair and discussing in detail the most recent advances in the field. Particularly, there are presented the developments in lightweight materials, meshes with improved attachment, antimicrobial fabrics, composite and hybrid textiles, and performant mesh designs, followed by a systematic review of recently completed clinical trials.

Novel Material Optimization Strategies for Developing Upgraded Abdominal Meshes

Over 20 million hernias are operated on globally per year, with most interventions requiring mesh reinforcement. A wide range of such medical devices are currently available on the market, most fabricated from synthetic polymers. Yet, searching for an ideal mesh is an ongoing process, with continuous efforts directed toward developing upgraded implants by modifying existing products or creating innovative systems from scratch. In this regard, this review presents the most frequently employed polymers for mesh fabrication, outlining the market available products and their relevant characteristics, further focusing on the state-of-the-art mesh approaches. Specifically, we mainly discuss recent studies concerning coating application, nanomaterials addition, stem cell seeding, and 3D printing of custom mesh designs.

Biomaterials as Implants in the Orthopedic Field for Regenerative Medicine: Metal versus Synthetic Polymers

Patients suffering bone fractures in different parts of the body require implants that will enable similar function to that of the natural bone that they are replacing. Joint diseases (rheumatoid arthritis and osteoarthritis) also require surgical intervention with implants such as hip and knee joint replacement. Biomaterial implants are utilized to fix fractures or replace parts of the body. For the majority of these implant cases, either metal or polymer biomaterials are chosen in order to have a similar functional capacity to the original bone material. The biomaterials that are employed most often for implants of bone fracture are metals such as stainless steel and titanium, and polymers such as polyethene and polyetheretherketone (PEEK). This review compared metallic and synthetic polymer implant biomaterials that can be employed to secure load-bearing bone fractures due to their ability to withstand the mechanical stresses and strains of the body, with a focus on their classification, properties, and application.

Sodium butyrate attenuates peritoneal fibroproliferative process in mice

NEW FINDINGS

What is the central question of this study? Peritoneal injury can result in a persistent fibroproliferative process in the abdominal cavity, causing pain and loss of function of internal organs. This study aimed to demonstrate the use of sodium butyrate (NaBu) as a potential agent to attenuate peritoneal fibrosis induced by a synthetic matrix. What is the main finding and its importance? Our findings provide the first evidence that NaBu attenuates the inflammatory, angiogenesis and fibrogenesis axes involved in the formation of peritoneal fibrovascular tissue, indicating the potential of this compound to ameliorate peritoneal fibrosis.

ABSTRACT

The aim of this study was to identify the bio-efficacy of sodium butyrate (NaBu) on preventing the development of peritoneal fibrovascular tissue induced by implantation of a synthetic matrix in the abdominal cavity. Polyether-polyurethane sponge discs were implanted in the peritoneal cavity of mice, which were treated daily with oral administration of NaBu (100 mg/kg). Control animals received water (100 μl). After 7 days, the implants were removed for assessment of inflammatory, angiogenic and fibrogenic markers. Compared with control values, NaBu treatment decreased mast cell recruitment/activation, inflammatory enzyme activities, levels of pro-inflammatory cytokines, and the proteins p65 and p50 of the nuclear factor-κB pathway. Angiogenesis, as determined by haemoglobin content, vascular endothelial growth factor levels and the number of blood vessels in the implant, was reduced by the treatment. In NaBu-treated animals, the predominant collagen present in the abdominal fibrovascular tissue was thin collagen, whereas in control implants it was thick collagen. Transforming growth factor-β1 levels were also lower in implants of treated animals. Sodium butyrate downregulated the inflammatory, angiogenesis and fibrogenesis axes of the fibroproliferative tissue induced by the intraperitoneal synthetic matrix. This compound has potential to control/regulate chronic inflammation and adverse healing processes in the abdominal cavity.

Bottlebrush inspired injectable hydrogel for rapid prevention of postoperative and recurrent adhesion

Postsurgical adhesion is a common clinic disease induced by surgical trauma, accompanying serious subsequent complications. Current non-surgical approaches of drugs treatment and biomaterial barrier administration only show limited prevention effects and couldn't effectively promote peritoneum repair. Herein, inspired by bottlebrush, a novel self-fused, antifouling, and injectable hydrogel is fabricated by the free-radical polymerization in aqueous solution between the methacrylate hyaluronic acid (HA-GMA) and N-(2-hydroxypropyl) methacrylamide (HPMA) monomer without any chemical crosslinkers, termed as H-HPMA hydrogel. The H-HPMA hydrogel can be tuned to perform excellent self-fused properties and suitable abdominal metabolism time. Intriguingly, the introduction of the ultra-hydrophilic HPMA chains to the H-HPMA hydrogel affords an unprecedented antifouling capability. The HPMA chains establish a dense hydrated layer that rapidly prevents the postsurgical adhesions and recurrent adhesions after adhesiolysis in vivo. The H-HPMA hydrogel can repair the peritoneal wound of the rat model within 5 days. Furthermore, an underlying mechanism study reveals that the H-HPMA hydrogel significantly regulated the mesothelial-to-mesenchymal transition (MMT) process dominated by the TGF-β-Smad2/3 signal pathway. Thus, we developed a simple, effective, and available approach to rapidly promote peritoneum regeneration and prevent peritoneal adhesion and adhesion recurrence after adhesiolysis, offering novel design ideas for developing biomaterials to prevent peritoneal adhesion.

Ultra-Fine Polyethylene Hernia Meshes Improve Biocompatibility and Reduce Intraperitoneal Adhesions in IPOM Position in Animal Models

(1) Introduction: The intraperitoneal onlay mesh technique (IPOM) is widely used to repair incisional hernias. This method has advantages but suffers from complications due to intraperitoneal adhesion formation between the mesh and intestine. An ideal mesh minimizes adhesions and shows good biocompatibility. To address this, newly developed multifilamentous polyethylene (PET) meshes were constructed from sub-macrophage-sized monofilaments and studied regarding biocompatibility and adhesion formation. (2) Methods: We investigated fine (FPET, 72 filaments, 11 µm diameter each) and ultra-fine multifilament (UFPET, 700 filaments, 3 µm diameter each) polyethylene meshes for biocompatibility in subcutaneous implantation in rats. Adhesion formation was analyzed in the IPOM position in rabbits. Geometrically identical mono-filamentous polypropylene (PP) Bard Soft® PP meshes were used for comparison. Histologic and immune-histologic foreign body reactions were assessed in 48 rats after 7 or 21 days (four mesh types, with two different mesh types per rat; n = 6 per mesh type). Additionally, two different mesh types each were placed in the IPOM position in 24 rabbits to compile the Diamond peritoneal adhesion score after the same timeframes. The biocompatibility and adhesion score differences were analyzed with the Kruskal–Wallis nonparametric statistical test. (3) Results: Overall, FPET and, especially, UFPET showed significantly smaller foreign body granulomas compared to PP meshes. Longer observation periods enhanced the differences. Immunohistology showed no significant differences in the cellular immune response and proliferation. UFPET demonstrated significantly reduced peritoneal adhesion formation compared to all other tested meshes after 21 days. (4) Conclusions: Overall, FPET and, especially, UFPET demonstrated their suitability for IPOM hernia meshes in animal models by improving major aspects of the foreign body reaction and reducing adhesion formation.

Antimicrobial Meshes for Hernia Repair: Current Progress and Perspectives

Recent advances in the development of biomaterials have given rise to new options for surgery. New-generation medical devices can control chemical breakdown and resorption, prevent post-operative adhesion, and stimulate tissue regeneration. For the fabrication of medical devices, numerous biomaterials can be employed, including non-degradable biomaterials (silicone, polypropylene, expanded polytetrafluoroethylene) or biodegradable polymers, including implants and three-dimensional scaffolds for tissue engineering, which require particular physicochemical and biological properties. Based on the combination of new generation technologies and cell-based therapies, the biocompatible and bioactive properties of some of these medical products can lead to progress in the repair of injured or harmed tissue and in tissue regeneration. An important aspect in the use of these prosthetic devices is the associated infection risk, due to the medical complications and socio-economic impact. This paper provides the latest achievements in the field of antimicrobial surgical meshes for hernia repair and discusses the perspectives in the development of these innovative biomaterials.

Latest Trends on the Attenuation of Systemic Foreign Body Response and Infectious Complications of Synthetic Hernia Meshes

Throughout the past few years, hernia incidence has remained at a high level worldwide, with more than 20 million people requiring hernia surgery each year. Synthetic hernia meshes play an important role, providing a microenvironment that attracts and harbors host cells and acting as a permanent roadmap for intact abdominal wall reconstruction. Nevertheless, it is still inevitable to cause not-so-trivial complications, especially chronic pain and adhesion. In long-term studies, it was found that the complications are mainly caused by excessive fibrosis from the foreign body reaction (FBR) and infection resulting from bacterial colonization. For a thorough understanding of their complex mechanism and providing a richer background for mesh development, herein, we discuss different clinical mesh products and explore the interactions between their structure and complications. We further explored progress in reducing mesh complications to provide varied strategies that are informative and instructive for mesh modification in different research directions. We hope that this work will spur hernia mesh designers to step up their efforts to develop more practical and accessible meshes by improving the physical structure and chemical properties of meshes to combat the increasing risk of adhesions, infections, and inflammatory reactions. We conclude that further work is needed to solve this pressing problem, especially in the analysis and functionalization of mesh materials, provided of course that the initial performance of the mesh is guaranteed.

A Polymer-Biologic Hybrid Hernia Construct: Review of Data and Early Experiences

Surgical mesh reinforcement of the human abdominal wall has been found to reduce the chance of recurrence in hernia repairs. While traditionally polymer meshes have been used in hernia repair, alternative mesh options have been engineered to prevent the inflammatory foreign body response invoked by polymers. A reinforced tissue matrix (RTM) mesh has been developed by embedding a polymer within a decellularized extracellular matrix. This combination has been attributed to the recruitment of host cells, a pro-healing response, and attenuation of the foreign body response. This has been observed to lead to the regeneration of functional tissue within the repair site that is reinforced by the polymer to offload abdominal pressures over time. This manuscript presents the review of OviTex, an RTM, in several types of hernia repair. The authors have found that the use of RTM in hernia repair is effective in preventing foreign body response, promoting wound healing, and providing reinforcement to lower the risk of hernia recurrence.

Functionalized Strategies and Mechanisms of the Emerging Mesh for Abdominal Wall Repair and Regeneration

Meshes have been the overwhelmingly popular choice for the repair of abdominal wall defects to retrieve the bodily integrity of musculofascial layer. Broadly, they are classified into synthetic, biological and composite mesh based on their mechanical and biocompatible features. With the development of anatomical repair techniques and the increasing requirements of constructive remodeling, however, none of these options satisfactorily manages the conditional repair. In both preclinical and clinical studies, materials/agents equipped with distinct functions have been characterized and applied to improve mesh-aided repair, with the importance of mesh functionalization being highlighted. However, limited information exists on systemic comparisons of the underlying mechanisms with respect to functionalized strategies, which are fundamental throughout repair and regeneration. Herein, we address this topic and summarize the current literature by subdividing common functions of the mesh into biomechanics-matched, macrophage-mediated, integration-enhanced, anti-infective and antiadhesive characteristics for a comprehensive overview. In particular, we elaborate their effects separately with respect to host response and integration and discuss their respective advances, challenges and future directions toward a clinical alternative. From the vastly different approaches, we provide insight into the mechanisms involved and offer suggestions for personalized modifications of these emerging meshes.

Development of electrospun core-shell polymeric mat using poly (ethyl-2) cyanoacrylate/polyurethane to attenuate biological adhesion on polymeric mesh implants

Poly (ethyl-2) cyanoacrylate was used to create an adhesion-free biocompatible non-woven material reinforced by polyurethane core via a co-axial electrospinning set-up. The effect of relative humidity (RH) of (18, 30, 40, 60, and 68) % on the electrospinning process was examined, and found that in order to achieve well defined core-shell fiber structure, the optimal RH was 18%. If the RH is >18%, a phenomenon called Taylor cone cyclic destabilization occurs, which results in unfavorable surface and mechanical properties of the mat. The developed composite electrospun mat has the potential to be used in medical devices, such as repairing the viscera layer for intraperitoneal hernia mesh implants, which require the attenuation of biological elements, and adequate mechanical properties.

Polypropylene mesh for hernia repair with controllable cell adhesion/de-adhesion properties

Herein, a versatile bilayer system, composed by a polypropylene (PP) mesh and a covalently bonded poly(N-isopropylacrylamide) (PNIPAAm) hydrogel, is reported. The cell adhesion mechanism was successfully modulated by controlling the architecture of the hydrogel in terms of duration of PNIPAAm grafting time, crosslinker content, and temperature of material exposure in PBS solutions (below and above the LCST of PNIPAAm). The best in vitro results with fibroblast (COS-1) and epithelial (MCF-7) cells was obtained with a mesh modified with a porous iPP-g-PNIPAAm bilayer system, prepared via PNIPAAm grafting for 2 h at the lowest N,N'-methylene bis(acrylamide) (MBA) concentration (1 mM). Under these conditions, the detachment of the fibroblast-like cells was 50% lower than that of the control, after 7 days of cell incubation, which represents a high de-adhesion of cells in a short period. Moreover, the whole system showed excellent stability in dry or wet media, proving that the thermosensitive hydrogel was well adhered to the polymer surface, after PP fibre activation by cold plasma. This study provides new insights on the development of anti-adherent meshes for abdominal hernia repair.

Biological Scaffolds for Abdominal Wall Repair: Future in Clinical Application?

Millions of abdominal wall repair procedures are performed each year for primary and incisional hernias both in the European Union and in the United States with extremely high costs. Synthetic meshes approved for augmenting abdominal wall repair provide adequate mechanical support but have significant drawbacks (seroma formation, adhesion to viscera, stiffness of abdominal wall, and infection). Biologic scaffolds (i.e., derived from naturally occurring materials) represent an alternative to synthetic surgical meshes and are less sensitive to infection. Among biologic scaffolds, extracellular matrix scaffolds promote stem/progenitor cell recruitment in models of tissue remodeling and, in the specific application of abdominal wall repair, have enough mechanical strength to support the repair. However, many concerns remain about the use of these scaffolds in the clinic due to their higher cost of production compared with synthetic meshes, despite having the same recurrence rate. The present review aims to highlight the pros and cons of using biologic scaffolds as surgical devices for abdominal wall repair and present possible improvements to widen their use in clinical practice.