Small molecule immunosensing using surface plasmon resonance

Recent Advances on Rapid Detection Methods of Steroid Hormones in Animal Origin Foods

Animal-derived foods constitute a crucial source of nutrients for humans. The judicious application of steroid hormones in the breeding process can serve multiple purposes, including growth promotion, weight gain, and anti-inflammatory effects, among others. However, excessive misuse poses a considerable risk to both food safety and consumer health. Currently, the primary means of detecting steroid hormones involve liquid chromatography, gas chromatography, and their combination with mass spectrometry. These methods necessitate advanced instrumentation, intricate pretreatment procedures, and the expertise of specialized laboratories and technicians. In recent years, the swift evolution of analytical science, technology, and instrumentation has given rise to various rapid detection techniques for steroid hormone residues, providing a robust technical foundation for ensuring food safety. This review commences by delineating the roles of steroid hormones, the associated residue hazards, and the pertinent residue restriction standards. Subsequently, it delves deeply into the analysis of the most recent rapid detection techniques for steroid hormones, ultimately culminating in an assessment of the challenges currently confronting the field, along with an exploration of potential future advancements. We sincerely hope that this review will inspire and provide valuable insights to the pertinent researchers.

Detection of estradiol with a digital immunoassay using an anti-immunocomplex antibody and single-molecule observation of gold nanoparticles

Gold nanoparticles (AuNPs) have been widely applied to molecular sensors due to their optical properties. We previously reported a molecular detection by observing the scattered light of AuNPs at a single nanoparticle level using dark field microscopy (DFM). Recently, a molecular detection method using digital immunoassay has been reported, taking advantage of the characteristics of DFM. However, the digital immunoassays reported so far have been performed by a conventional sandwich immunoassay, which is difficult to apply to the detection of small molecules. In this study, with the aim of small molecule detection, we developed a digital immunoassay method using an anti-immunocomplex antibody that specifically recognizes immunocomplexes of small molecules with antibodies. The number of AuNPs modified with anti-immunocomplex antibody bound to immunocomplex of estradiol and anti-estradiol antibody was counted at a single nanoparticle level using DFM. We demonstrated for the first time that estradiol molecule can be detected by digital immunoassay using DFM and an anti-immunocomplex antibody with a detection sensitivity of 1 pg/mL.

Isothermal titration calorimetry and surface plasmon resonance methods to probe protein-protein interactions

Isothermal titration calorimetry (ITC) and surface plasmon resonance (SPR) are two commonly used methods to probe biomolecular interactions. ITC can provide information about the binding affinity, stoichiometry, changes in Gibbs free energy, enthalpy, entropy, and heat capacity upon binding. SPR can provide information about the association and dissociation kinetics, binding affinity, and stoichiometry. Both methods can determine the nature of protein-protein interactions and help understand the physicochemical principles underlying complex biochemical pathways and communication networks. This methods article discusses the practical knowledge of how to set up and troubleshoot these two experiments with some examples.

Neuroactive Steroids, Toll-like Receptors, and Neuroimmune Regulation: Insights into Their Impact on Neuropsychiatric Disorders

Pregnane neuroactive steroids, notably allopregnanolone and pregnenolone, exhibit efficacy in mitigating inflammatory signals triggered by toll-like receptor (TLR) activation, thus attenuating the production of inflammatory factors. Clinical studies highlight their therapeutic potential, particularly in conditions like postpartum depression (PPD), where the FDA-approved compound brexanolone, an intravenous formulation of allopregnanolone, effectively suppresses TLR-mediated inflammatory pathways, predicting symptom improvement. Additionally, pregnane neurosteroids exhibit trophic and anti-inflammatory properties, stimulating the production of vital trophic proteins and anti-inflammatory factors. Androstane neuroactive steroids, including estrogens and androgens, along with dehydroepiandrosterone (DHEA), display diverse effects on TLR expression and activation. Notably, androstenediol (ADIOL), an androstane neurosteroid, emerges as a potent anti-inflammatory agent, promising for therapeutic interventions. The dysregulation of immune responses via TLR signaling alongside reduced levels of endogenous neurosteroids significantly contributes to symptom severity across various neuropsychiatric disorders. Neuroactive steroids, such as allopregnanolone, demonstrate efficacy in alleviating symptoms of various neuropsychiatric disorders and modulating neuroimmune responses, offering potential intervention avenues. This review emphasizes the significant therapeutic potential of neuroactive steroids in modulating TLR signaling pathways, particularly in addressing inflammatory processes associated with neuropsychiatric disorders. It advances our understanding of the complex interplay between neuroactive steroids and immune responses, paving the way for personalized treatment strategies tailored to individual needs and providing insights for future research aimed at unraveling the intricacies of neuropsychiatric disorders.

Delineation of functional subdomains of Huntingtin protein and their interaction with HAP40

The huntingtin (HTT) protein plays critical roles in numerous cellular pathways by functioning as a scaffold for its many interaction partners and HTT knock out is embryonic lethal. Interrogation of HTT function is complicated by the large size of this protein so we studied a suite of structure-rationalized subdomains to investigate the structure-function relationships within the HTT-HAP40 complex. Protein samples derived from the subdomain constructs were validated using biophysical methods and cryo-electron microscopy, revealing they are natively folded and can complex with validated binding partner, HAP40. Derivatized versions of these constructs enable protein-protein interaction assays in vitro, with biotin tags, and in cells, with luciferase two-hybrid assay-based tags, which we use in proof-of-principle analyses to further interrogate the HTT-HAP40 interaction. These open-source biochemical tools enable studies of fundamental HTT biochemistry and biology, will aid the discovery of macromolecular or small-molecule binding partners and help map interaction sites across this large protein.

Crystal structure of tubulin-barbigerone complex enables rational design of potent anticancer agents with isoflavone skeleton

BACKGROUND

Isoflavones possess many biological activities, including anti-inflammatory and anticancer effects. Microtubules (composed of αβ-tubulin heterodimers) are described as one possible cellular target of some of these isoflavones. However, the binding of tubulin to isoflavones has not been extensively studied, and until now, no crystal structure of the tubulin-isoflavone complex has been solved, and details of the isoflavone-tubulin interaction remain elusive.

PURPOSE

Barbigerone is an isoflavone mainly found in the genus Milletti, such as the edible leguminous plant Millettia ferruginea, with anticancer activity. This study aims to confirm the cellular target of barbigerone and to study its anticancer mechanism.

METHOD

Surface plasmon resonance assays and X-ray crystallography were used to study the interaction of barbigerone with tubulin protein. Immunofluorescence, in-cell and in vitro tubulin polymerization assays were employed to investigate the mechanism. MTT assays, cell clonal formation assays, wound healing assays, tube formation assays and H460 xenograft models were conducted to evaluate the in vitro and in vivo anticancer activities of barbigerone and one of its derivatives, 0412.

RESULTS

Here, we found that barbigerone binds to tubulin to inhibit tubulin polymerization. Moreover, we solved the X-ray crystal structure of the tubulin-barbigerone complex at 2.33 Å resolution, which unambiguously determined the orientation and position of barbigerone in the colchicine-binding site. Illuminated by the X-ray data, we synthetized and obtained a more active isoflavone, 0412. Both barbigerone and 0412 inhibit cancer cell proliferation, tubulin polymerization, migration of HeLa cells and capillary-like tube formation of HUVECs, induce G2/M phase cell cycle arrest and apoptosis, and exhibit anticancer activity in an H460 xenograft model.

CONCLUSION

In all, through biochemical and X-ray crystal structure results, we identified tubulin as the cellular target of one isoflavone, barbigerone, and proved that the tubulin-barbigerone complex plays a guiding role in obtaining a more active compound, 0412. These studies provide a crucial research basis for the development of isoflavones as anticancer candidate compounds.

Theoretical and experimental study of a highly sensitive SPR biosensor based on Au grating and Au film coupling structure

A high-sensitivity surface plasmon resonance (SPR) sensor based on the coupling of Au grating and Au film is investigated through simulations and experiments. The SPR sensor is designed by using a hybrid method composed of genetic algorithm (GA) and rigorous coupled wave analysis (RCWA). The numerical results indicate the sensor has an angular sensitivity of 397.3°/RIU (refractive index unit), which is approximately 2.81 times higher than the conventional Au-based sensor and it is verified by experiments. Theoretical analysis, by finite-difference time-domain (FDTD) method, demonstrates the co-coupling between surface plasmon polaritons (SPPs) propagating on the surface of Au film and localized surface plasmons (LSPs) in the Au grating nanostructure, improving the sensitivity of the SPR sensor. According to the optimized structural parameters, the proposed sensor is fabricated using e-beam lithography and magnetron sputtering. In addition, the proposed sensor is very sensitive to the detection of small molecules. The limit of detection (LOD) for okadaic acid (OA) is 0.72 ng/mL based on an indirect competitive inhibition method, which is approximately 38 times lower than the conventional Au sensor. Such a high-sensitivity SPR biosensor has potential in the applications of immunoassays and clinical diagnosis.

Performance Enhancement of SPR Biosensor Using Graphene–MoS2 Hybrid Structure

We investigate a high-sensitivity surface plasmon resonance (SPR) biosensor consisting of a Au layer, four-layer MoS₂, and monolayer graphene. The numerical simulations, by the transfer matrix method (TMM), demonstrate the sensor has a maximum sensitivity of 282°/RIU, which is approximately 2 times greater than the conventional Au-based SPR sensor. The finite difference time domain (FDTD) indicates that the presence of MoS₂ film generates a strong surface electric field and enhances the sensitivity of the proposed SPR sensor. In addition, the influence of the number of MoS₂ layers on the sensitivity of the proposed sensor is investigated by simulations and experiments. In the experiment, MoS₂ and graphene films are transferred on the Au-based substrate by the PMMA-based wet transfer method, and the fabricated samples are characterized by Raman spectroscopy. Furthermore, the fabricated sensors with the Kretschmann configuration are used to detect okadaic acid (OA). The okadaic acid–bovine serum albumin bioconjugate (OA-BSA) is immobilized on the graphene layer of the sensors to develop a competitive inhibition immunoassay. The results show that the sensor has a very low limit of detection (LOD) of 1.18 ng/mL for OA, which is about 22.6 times lower than that of a conventional Au biosensor. We believe that such a high-sensitivity SPR biosensor has potential applications for clinical diagnosis and immunoassays.

Evaluation of Structural and Optical Properties of Graphene Oxide-Polyvinyl Alcohol Thin Film and Its Potential for Pesticide Detection Using an Optical Method

In the present work, graphene oxide (GO)–polyvinyl alcohol (PVA) composites thin film has been successfully synthesized and prepared by spin coating techniques. Then, the properties and morphology of the samples were characterized using Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-Vis), and atomic force microscopy (AFM). Experimental FTIR results for GO–PVA thin film demonstrated the existence of important functional groups such as -CH2 stretching, C=O stretching, and O–H stretching. Furthermore, UV-Vis analysis indicated that the GO–PVA thin film had the highest absorbance that can be observed at wavelengths ranging from 200 to 500 nm with a band gap of 4.082 eV. The surface morphology of the GO–PVA thin film indicated the thickness increased when in contact with carbaryl. The incorporation of the GO–PVA thin film with an optical method based on the surface plasmon resonance (SPR) phenomenon demonstrated a positive response for the detection of carbaryl pesticide as low as 0.02 ppb. This study has successfully proposed that the GO–PVA thin film has high potential as a polymer nanomaterial-based SPR sensor for pesticide detection.

Nanoarchitectonics for Abused-Drug Biosensors

Rapid, accessible, and highly accurate biosensors for the detection of addictive and abused drugs are needed to reduce the adverse personal and societal impacts of addiction. Modern sensors that utilize next-generation technologies, e.g., nanobiotechnology and nanoarchitectonics, have triggered revolutionary progress in the field as they allow accurate detection and tracking of trace levels of major classes of drugs. This paper reviews advances in the field of biosensors for the detection of commonly abused drugs, both prescribed such as codeine and morphine, and illegal narcotics like cocaine.

Analysis of the surface plasmon resonance interferometric imaging performance of scanning confocal surface plasmon microscopy

Here, we apply rigorous coupled-wave theory to analyze the optical phase imaging performance of scanning confocal surface plasmon microscope. The scanning confocal surface plasmon resonance microscope is an embedded interferometric microscope interfering between two integrated optical beams. One beam is provided by the central part around the normal incident angle of the back focal plane, and the other beam is the incident angles beyond the critical angle, exciting the surface plasmon. Furthermore, the two beams can form an interference signal inside a confocal pinhole in the image plane, which provides a well-defined path for the surface plasmon propagation. The scanning confocal surface plasmon resonance microscope operates by scanning the sample along the optical axis z, so-called V(z). The study investigates two imaging modes: non-quantitative imaging and quantitative imaging modes. We also propose a theoretical framework to analyze the scanning confocal surface plasmon resonance microscope compared to non-interferometric surface plasmon microscopes and quantify quantitative performance parameters including spatial resolution and optical contrast for non-quantitative imaging; sensitivity and crosstalk for quantitative imaging. The scanning confocal SPR microscope can provide a higher spatial resolution, better sensitivity, and lower crosstalk measurement. The confocal SPR microscope configuration is a strong candidate for high throughput measurements since it requires a smaller sensing channel than the other SPR microscopes.

Plasmonic mode coupling and thin film sensing in metal-insulator-metal structures

Optical sensors based on surface plasmon resonance (SPR) in the attenuated total reflection (ATR) configuration in layered media have attracted considerable attention over the past decades owing to their ability of label free sensing in biomolecular interaction analysis, and highly sensitive detection of changes in refractive index and thickness, i.e. the optical thickness, of thin film adsorbates (thin film sensing). Furthermore, SPR is highly sensitive to the refractive index of the medium adjacent to the bare metal, and it allows for bulk sensing as well. When deposited at the metal/air interface, an adsorbed layer disturbs the highly localized, i.e. bound, wave at this interface and changes the plasmon resonance to allow for sensing in angular or wavelength interrogation and intensity measurement modes. A high degree of sensitivity is required for precise and efficient sensing, especially for biomolecular interaction analysis for early stage diagnostics; and besides conventional SPR (CSPR), several other configurations have been developed in recent years targeting sensitivity, including long-range SPR (LRSPR) and waveguide-coupled SPR (WGSPR) observed in MIM structures, referred here to by MIM modes, resulting from the coupling of SPRs at I/M interfaces, and Fano-type resonances occurring from broad and sharp modes coupling in layered structures. In our previous research, we demonstrated that MIM is better than CSPR for bulk sensing, and in this paper, we show that CSPR is better than MIM for thin film sensing for thicknesses of the sensing layer (SL) larger than 10 nm. We discuss and compare the sensitivity of CSPR and MIM for thin film sensing by using both experiments and theoretical calculations based on rigorous electromagnetic (EM) theory. We discuss in detail MIM modes coupling and anti-crossing, and we show that when a thin film adsorbate, i.e. a SL), is deposited on top of the outermost-layer of an optimized MIM structure, it modifies the characteristics of the coupled modes of the structure, and it reduces the electric field, both inside the SL and at the SL/air interface, and as a result, it decreases the sensitivity of the MIM versus the CSPR sensor. Our work is of critical importance to plasmonic mode coupling using MIM configurations, as well as to optical bio- and chemical-sensing.

The Role of Surface Chemistry in the Efficacy of Protein and DNA Microarrays for Label-Free Detection: An Overview

The importance of microarrays in diagnostics and medicine has drastically increased in the last few years. Nevertheless, the efficiency of a microarray-based assay intrinsically depends on the density and functionality of the biorecognition elements immobilized onto each sensor spot. Recently, researchers have put effort into developing new functionalization strategies and technologies which provide efficient immobilization and stability of any sort of molecule. Here, we present an overview of the most widely used methods of surface functionalization of microarray substrates, as well as the most recent advances in the field, and compare their performance in terms of optimal immobilization of the bioreceptor molecules. We focus on label-free microarrays and, in particular, we aim to describe the impact of surface chemistry on two types of microarray-based sensors: microarrays for single particle imaging and for label-free measurements of binding kinetics. Both protein and DNA microarrays are taken into consideration, and the effect of different polymeric coatings on the molecules' functionalities is critically analyzed.

Emergent Biosensing Technologies Based on Fluorescence Spectroscopy and Surface Plasmon Resonance

The purpose of this work is to provide an exhaustive overview of the emerging biosensor technologies for the detection of analytes of interest for food, environment, security, and health. Over the years, biosensors have acquired increasing importance in a wide range of applications due to synergistic studies of various scientific disciplines, determining their great commercial potential and revealing how nanotechnology and biotechnology can be strictly connected. In the present scenario, biosensors have increased their detection limit and sensitivity unthinkable until a few years ago. The most widely used biosensors are optical-based devices such as surface plasmon resonance (SPR)-based biosensors and fluorescence-based biosensors. Here, we will review them by highlighting how the progress in their design and development could impact our daily life.

An electrochemical biosensing platform for progesterone hormone detection using magnetic graphene oxide

In recent times, graphene and its derivatives have turned out to be emerging nanomaterials as transducers to promote electron transport in the field of biosensing using electrochemical techniques. In electrochemical biosensing strategies, key factors such as signal amplification, stability, and sensitivity are necessary for attaining improved sensor performance. In the present work, we synthesized magnetic nanocomposites of graphene oxide and employed them as an electrode material for the loading of bio receptors. The increased surface area with high electric conductance enhanced the sensor's response. The immobilization of progesterone (PGN) antibodies on the modified electrode-sensing surface led to a hindered electron transport that decreased the current response. The developed electrochemical immunosensor assembled successfully in a stepwise process using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) studies along with the electrochemical impedance spectroscopy (EIS) analysis. The current response decreased linearly with the increased progesterone (PGN) concentration range of 0.01 pM-1000 nM with excellent detection limits of 0.15 pM (DPV) and 0.17 pM (CV) under optimal experimental conditions. The label-free electrochemical immunosensor has shown a promising platform for rapid and direct analysis of PGN due to its high sensitivity, selectivity, stability, and repeatability in water samples.

Insights into the Membranolytic Activity of Antimalarial Drug-Cell Penetrating Peptide Conjugates

Conjugation of TP10, a cell-penetrating peptide with intrinsic antimalarial activity, to the well-known antimalarial drugs chloroquine and primaquine has been previously shown to enhance the peptide's action against, respectively, blood- and liver-stage malaria parasites. Yet, this was achieved at the cost of a significant increase in haemolytic activity, as fluorescence microscopy and flow cytometry studies showed the conjugates to be more haemolytic for non-infected than for Plasmodium-infected red blood cells. To gain further insight into how these conjugates distinctively bind, and likely disrupt, membranes of both Plasmodium-infected and non-infected erythrocytes, we used dynamic light scattering and surface plasmon resonance to study the interactions of two representative conjugates and their parent compounds with lipid model membranes. Results obtained are herein reported and confirm that a strong membrane-disruptive character underlies the haemolytic properties of these conjugates, thus hampering their ability to exert selective antimalarial action.

Nanostructured Biosilica of Diatoms: From Water World to Biomedical Applications

Diatoms—unicellular photosynthetic algae—are promising natural sources of nanostructured silica. These microorganisms produce in their membrane approximately a highly ordered porous cell wall called a frustule as protection from environmental stress. Diatom frustules consist of hydrated silica that show peculiar properties including biocompatibility, tailorable surface chemistry, chemical inertness, and thermal stability. Frustules harvested from aquatic ecosystems or diatomaceous fossil sediments represent an excellent cost-effective source of biosilica for a broad range of biomedical applications. The porous ultrastructure of the frustules displays a large surface area available for coating with various biomolecules through different functionalization methods. In this review article, we highlight the main features of diatom biosilica and present some of the most advantageous properties that support the employment of frustules in the field of drug delivery, biosensing, and regenerative medicine. In particular, it is offered an insight into the most common functionalization strategies through which diatom physicochemical properties can be modified and tailored according to the described field of application.

Revealing the Kinetic Advantage of a Competitive Small-Molecule Immunoassay by Direct Detection

Small-molecule detection in an immunoassay format generally employs competition or labeling. A novel direct-detection label-free primary immunoassay utilizing second harmonic generation (SHG) has been developed and the utility of the method has been demonstrated for several small-molecule narcotics. Specifically, the binding of morphine, methadone, and cocaine to antimorphine, antimethadone, and anticocaine antibodies was measured by SHG, allowing binding affinities and rates of dissociation to be obtained. The SHG primary immunoassay has provided the first kinetic measurements of small-molecule hapten interactions with a receptor antibody. The kinetics reveal for the first time that competitive immunoassays achieve their selectivity by taking advantage of the kinetics of association and dissociation of the labeled and unlabeled target and nontarget small-molecule to the capture antibody. In particular, the induced fit of the target small-molecule to their antibody pairs prolongs their residence time, while the nontarget small-molecule dissociate rapidly in comparison.

Fast Detection of 2,4,6-Trinitrotoluene (TNT) at ppt Level by a Laser-Induced Immunofluorometric Biosensor

The illegal use of explosives by terrorists and other criminals is an increasing issue in public spaces, such as airports, railway stations, highways, sports venues, theaters, and other large buildings. Security in these environments can be achieved by different means, including the installation of scanners and other analytical devices to detect ultra-small traces of explosives in a very short time-frame to be able to take action as early as possible to prevent the detonation of such devices. Unfortunately, an ideal explosive detection system still does not exist, which means that a compromise is needed in practice. Most detection devices lack the extreme analytical sensitivity, which is nevertheless necessary due to the low vapor pressure of nearly all explosives. In addition, the rate of false positives needs to be virtually zero, which is also very difficult to achieve. Here we present an immunosensor system based on kinetic competition, which is known to be very fast and may even overcome affinity limitation, which impairs the performance of many traditional competitive assays. This immunosensor consists of a monolithic glass column with a vast excess of immobilized hapten, which traps the fluorescently labeled antibody as long as no explosive is present. In the case of the explosive 2,4,6-trinitrotoluene (TNT), some binding sites of the antibody will be blocked, which leads to an immediate breakthrough of the labeled protein, detectable by highly sensitive laser-induced fluorescence with the help of a Peltier-cooled complementary metal-oxide-semiconductor (CMOS) camera. Liquid handling is performed with high-precision syringe pumps and chip-based mixing-devices and flow-cells. The system achieved limits of detection of 1 pM (1 ppt) of the fluorescent label and around 100 pM (20 ppt) of TNT. The total assay time is less than 8 min. A cross-reactivity test with 5000 pM solutions showed no signal by pentaerythritol tetranitrate (PETN), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX). This immunosensor belongs to the most sensitive and fastest detectors for TNT with no significant cross-reactivity by non-related compounds. The consumption of the labeled antibody is surprisingly low: 1 mg of the reagent would be sufficient for more than one year of continuous biosensor operation.

Mesenchymal Stem Cells: A New Generation of Therapeutic Agents as Vehicles in Gene Therapy

In recent years, mesenchymal stem cells (MSCs) as a new tool for therapeutic gene delivery in clinics have attracted much attention. Their advantages cover longer lifespan, better isolation, and higher transfection efficiency and proliferation rate. MSCs are the preferred approach for cell-based therapies because of their in vitro self-renewal capacity, migrating especially to tumor tissues, as well as anti-inflammatory and immunomodulatory properties. Therefore, they have considerable efficiency in genetic engineering for future clinical applications in cancer gene therapy and other diseases. For improving therapeutic efficiency, targeted therapy of cancers can be achieved through the sustained release of therapeutic agents and functional gene expression induction to the intended tissues. The development of a new vector in gene therapy can improve the durability of a transgene expression. Also, the safety of the vector, if administered systemically, may resolve several problems, such as durability of expression and the host immune response. Currently, MSCs are prominent candidates as cell vehicles for both preclinical and clinical trials due to the secretion of therapeutic agents in several cancers. In the present study, we discuss the status of gene therapy in both viral and non-viral vectors along with their limitations. Throughout this study, the use of several nano-carriers for gene therapy is also investigated. Finally, we critically discuss the promising advantages of MSCs in targeted gene delivery, tumor inhibition and their utilization as the gene carriers in clinical situations.

Portable and field-deployed surface plasmon resonance and plasmonic sensors

Plasmonic sensors are ideally suited for the design of small, integrated, and portable devices that can be employed in situ for the detection of analytes relevant to environmental sciences, clinical diagnostics, infectious diseases, food, and industrial applications. To successfully deploy plasmonic sensors, scaled-down analytical devices based on surface plasmon resonance (SPR) and localized surface plasmon resonance (LSPR) must integrate optics, plasmonic materials, surface chemistry, fluidics, detectors and data processing in a functional instrument with a small footprint. The field has significantly progressed from the implementation of the various components in specifically designed prism-based instruments to the use of nanomaterials, optical fibers and smartphones to yield increasingly portable devices, which have been shown for a number of applications in the laboratory and deployed on site for environmental, biomedical/clinical, and food applications. A roadmap to deploy plasmonic sensors is provided by reviewing the current successes and by laying out the directions the field is currently taking to increase the use of field-deployed plasmonic sensors at the point-of-care, in the environment and in industries.

Molecularly imprinted polymer-based bioelectrical interfaces with intrinsic molecular charges

For enzyme-/antibody-free and label-free biosensing, a molecularly imprinted polymer (MIP)-based membrane with phenylboronic acid (PBA) molecules, which induces the change in the density of molecular charges based on the small biomolecule–PBA diol binding, has been demonstrated to be suitable for the bioelectrical interface of biologically coupled gate field-effect transistor (bio-FET) sensors. MIP-coated gate FET sensors selectively detect various small biomolecules such as glucose, dopamine, sialic acid, and oligosaccharides without using labeled materials. In particular, the well-controlled MIP film by surface-initiated atom transfer radical polymerization (SI-ATRP) contributes to the quantitative analysis of small biomolecule sensing, resulting in potentiometric Langmuir isotherm adsorption analysis by which the parameters such as the binding affinity between small biomolecules and MIP cavities are evaluated. Also, the output electrical signal of even a random MIP-coated gate FET sensor is quantitatively analyzed using the bi-Langmuir adsorption isotherm equation, showing the adsorption mechanism of small biomolecules onto the template-specific MIP membrane. Thus, a platform based on the MIP bioelectrical interface for the bio-FET sensor is suitable for an enzyme-/antibody-free and label-free biosensing system in the fields of clinical diagnostics, drug discovery, the food industry, and environmental research.

A molecularly imprinted polymer (MIP)-based membrane with phenylboronic acid (PBA) molecules, which induces the change in the density of molecular charges, is suitable for the bioelectrical interface of field-effect transistor (FET) sensors.

SNAPS: Sensor Analytics Point Solutions for Detection and Decision Support Systems

In this review, we discuss the role of sensor analytics point solutions (SNAPS), a reduced complexity machine-assisted decision support tool. We summarize the approaches used for mobile phone-based chemical/biological sensors, including general hardware and software requirements for signal transduction and acquisition. We introduce SNAPS, part of a platform approach to converge sensor data and analytics. The platform is designed to consist of a portfolio of modular tools which may lend itself to dynamic composability by enabling context-specific selection of relevant units, resulting in case-based working modules. SNAPS is an element of this platform where data analytics, statistical characterization and algorithms may be delivered to the data either via embedded systems in devices, or sourced, in near real-time, from mist, fog or cloud computing resources. Convergence of the physical systems with the cyber components paves the path for SNAPS to progress to higher levels of artificial reasoning tools (ART) and emerge as data-informed decision support, as a service for general societal needs. Proof of concept examples of SNAPS are demonstrated both for quantitative data and qualitative data, each operated using a mobile device (smartphone or tablet) for data acquisition and analytics. We discuss the challenges and opportunities for SNAPS, centered around the value to users/stakeholders and the key performance indicators users may find helpful, for these types of machine-assisted tools.

Thin Films Sensor Devices for Mycotoxins Detection in Foods: Applications and Challenges

Mycotoxins are a group of secondary metabolites produced by different species of filamentous fungi and pose serious threats to food safety due to their serious human and animal health impacts such as carcinogenic, teratogenic and hepatotoxic effects. Conventional methods for the detection of mycotoxins include gas chromatography and high-performance liquid chromatography coupled with mass spectrometry or other detectors (fluorescence or UV detection), thin layer chromatography and enzyme-linked immunosorbent assay. These techniques are generally straightforward and yield reliable results; however, they are time-consuming, require extensive preparation steps, use large-scale instruments, and consume large amounts of hazardous chemical reagents. Rapid detection of mycotoxins is becoming an increasingly important challenge for the food industry in order to effectively enforce regulations and ensure the safety of food and feed. In this sense, several studies have been done with the aim of developing strategies to detect mycotoxins using sensing devices that have high sensitivity and specificity, fast analysis, low cost and portability. The latter include the use of microarray chips, multiplex lateral flow, Surface Plasmon Resonance, Surface Enhanced Raman Scattering and biosensors using nanoparticles. In this perspective, thin film sensors have recently emerged as a good candidate technique to meet such requirements. This review summarizes the application and challenges of thin film sensor devices for detection of mycotoxins in food matrices.

Plasmonic Biosensor Based on Vertical Arrays of Gold Nanoantennas

Implementing large arrays of gold nanowires as functional elements of a plasmonic biosensor is an important task for future medical diagnostic applications. Here we present a microfluidic-channel-integrated sensor for the label-free detection of biomolecules, relying on localized surface plasmon resonances. Large arrays (∼1 cm²) of vertically aligned and densely packed gold nanorods to receive, locally confine, and amplify the external optical signal are used to allow for reliable biosensing. We accomplish this by monitoring the change of the optical nanostructure resonance in the presence of biomolecules within the tight focus area above the nanoantennas, combined with a surface treatment of the nanowires for a specific binding of the target molecules. As a first application, we detect the binding kinetics of two distinct DNA strands as well as the following hybridization of two complementary strands (cDNA) with different lengths (25 and 100 bp). Upon immobilization, a redshift of 1 nm was detected; further backfilling and hybridization led to a peak shift of additional 2 and 5 nm for 25 and 100 bp, respectively. We believe that this work gives deeper insight into the functional understanding and technical implementation of a large array of gold nanowires for future medical applications.

Collecting and processing samples in remote and dangerous places: the Environmental Sample Processor as a case study

Collecting water samples in remote or dangerous places can help identify chemical spills, discover clandestine weapons production, or determine if there has been natural or human-caused biological contamination of waterways. These collections can be expensive or put humans at risk due to the nature of the locale or the detection target. Such sample collection challenges are similar to those faced in oceanography, where accessibility and the physical realities of remoteness, corrosiveness, and pressure, place severe requirements on instrumentation, especially for unattended operations over long periods of time. The Monterey Bay Aquarium Research Institute (MBARI) has been at the forefront of developments that push forward sample collection and processing capabilities in the ocean. Specifically, the development of the environmental sample processor (ESP), a microbiology laboratory-in-a-can, has allowed extended presence with high frequency sampling. When deployed, the ESP filters water to collect particles, then either preserves those particles, or creates a homogenate for molecular analysis. Originally designed for detecting harmful algae blooms and the toxins they produce, the ESP now has expanded analytical capabilities. A newer version of the ESP is now being tested on an autonomous underwater vehicle, providing never-before-seen mobility and unprecedented access to the top 300 m of the ocean.

Potentiometric Adsorption Isotherm Analysis of a Molecularly Imprinted Polymer Interface for Small-Biomolecule Recognition

In this paper, we report a direct and quantitative analytical method of small-biomolecule recognition with a molecularly imprinted polymer (MIP) interface, taking advantage of the potentiometric principle of a field-effect transistor (FET) sensor, which enables the direct detection of ionic charges without using labeling materials such as fluorescent dyes. The interaction of low-molecular-weight oligosaccharides such as paromomycin and kanamycin with the MIP interface including phenylboronic acid (PBA) was directly and quantitatively analyzed from the electrical signals of an MIP-coated FET sensor. In particular, the change in the potential response of the FET sensor was derived on the basis of the multi-Langmuir adsorption isotherm equations, considering the change in the molecular charges of PBA caused by the adsorption equilibrium of the analytes with the vinyl PBA-copolymerized MIP membrane. Thus, the potentiometric adsorption isotherm analysis can elucidate the formation of selective binding sites at the MIP interface. The electrochemical analysis of the functional biointerface used in this study supports the design and construction of sensors for small biomarkers.

High-speed plasmonic modulator in a single metal layer

Plasmonics provides a possible route to overcome both the speed limitations of electronics and the critical dimensions of photonics. We present an all-plasmonic 116-gigabits per second electro-optical modulator in which all the elements-the vertical grating couplers, splitters, polarization rotators, and active section with phase shifters-are included in a single metal layer. The device can be realized on any smooth substrate surface and operates with low energy consumption. Our results show that plasmonics is indeed a viable path to an ultracompact, highest-speed, and low-cost technology that might find many applications in a wide range of fields of sensing and communications because it is compatible with and can be placed on a wide variety of materials.

A non-competitive surface plasmon resonance immunosensor for rapid detection of triazophos residue in environmental and agricultural samples

The wide application of an organophosphate pesticide triazophos raises concern on the environmental pollution and the potential risk to human health. Thus, it is crucial to regularly monitor triazophos residue in the environment and agro-products. Herein we described a non-competitive immunoassay for trace detection of triazophos using a direct surface plasmon resonance (SPR) biosensor. Two anti-triazophos monoclonal antibodies (mAbs) were immobilized on the sensor chip and characterized by SPR-based kinetic analysis. The mAb with relatively slow dissociation rate was used for direct immunosensing of triazophos. The biosensor assay showed a high specificity and a low detection limit of 0.096ngmL^-1 to triazophos, with the linear detection range of 0.98-8.29ngmL^-1. Under the optimal condition, the sensor chip could be regenerated for 160cycles at least. Moreover, the sensitive method was applied to determine triazophos in the spiked environmental water and agricultural products, as well as in unknown real-life samples (including Chinese cabbage, cucumber, and apple). Desirable results demonstrated that the newly-developed immunosensor could be used as a rapid, convenient, and reliable tool to regularly monitor triazophos and meet the detection requirement of its maximum residue limits.

Functionalized gold nanoparticle-enhanced competitive assay for sensitive small-molecule metabolite detection using surface plasmon resonance

A functionalized gold nanoparticle-enhanced competitive assay was developed to overcome the sensitivity challenge associated with direct SPR sensing of small-molecule metabolites.

Gold Nanoparticles Used as Protein Scavengers Enhance Surface Plasmon Resonance Signal

Although several researchers had reported on methodologies for surface plasmon resonance (SPR) signal amplification based on the use of nanoparticles (NPs), the majority addressed the sandwich technique and low protein concentration. In this work, a different approach for SPR signal enhancement based on the use of gold NPs was evaluated. The method was used in the detection of two lectins, peanut agglutinin (PNA) and concanavalin A (ConA). Gold NPs were functionalized with antibodies anti-PNA and anti-ConA, and these NPs were used as protein scavengers in a solution. After being incubated with solutions of PNA or ConA, the gold NPs coupled with the collected lectins were injected on the sensor containing the immobilized antibodies. The signal amplification provided by this method was compared to the signal amplification provided by the direct coupling of PNA and ConA to gold NPs. Furthermore, both methods, direct coupling and gold NPs as protein scavengers, were compared to the direct detection of PNA and ConA in solution. Compared to the analysis of free protein, the direct coupling of PNA and ConA to gold NPs resulted in a signal amplification of 10-40-fold and a 13-fold decrease of the limit of detection (LOD), whereas the use of gold NPs as protein scavengers resulted in an SPR signal 40-50-times higher and an LOD 64-times lower.

Biosensors for the Diagnosis of Celiac Disease: Current Status and Future Perspectives

Celiac disease (CD) is an autoimmune enteropathy initiated and sustained by the ingestion of gluten in genetically susceptible individuals. It is caused by a dysregulated immune response toward both dietary antigens, the gluten proteins of wheat, rye, and barley, and autoantigens, the enzyme tissue transglutaminase (TG2). The small intestine is the target organ. Although routine immunochemical protocols for a laboratory diagnosis of CD are available, faster, easier-to-use, and cheaper analytical devices for CD diagnosis are currently unavailable. This review focuses on biosensors, consisting of a physicochemical transducer and a bioreceptor, as promising analytical tools for diagnosis of CD and other diseases. Examples of recently developed biosensors as well as expectations for future lines of research and development in this field are presented.

Development of a QCM-D biosensor for Ochratoxin A detection in red wine

Ochratoxin A (OTA), a highly toxic compound, is one of the most widely spread mycotoxins that contaminates a large variety of agricultural commodities. Due to its presence in the food chain, it imposes a hazard on both human and animal health. Therefore, there is a need for precise, fast and simple methods for toxin quantification. Herein, a novel sensor based on a quartz crystal microbalance with dissipation monitoring (QCM-D) and antibodies for specific analyte recognition was developed for rapid and sensitive detection of OTA in red wine. The combination of indirect competitive assay with QCM-D gives a straightforward device, which can simultaneously measure frequency (Δf) and dissipation (ΔD) changes resulting in detailed information about the mass attached to the sensor surface as well as conformational changes, viscoelastic properties and the hydration state of the film. Small molecules (such as OTA) suffer from poor LOD due to the high concentration of primary antibody needed to generate adequate signal. In the present study, amplification of the QCM-D signal was obtained by applying secondary antibodies conjugated with gold nanoparticles (AuNPs). Thanks to this, a linear detection range of 0.2-40ngmL^-1 has been achieved with an excellent LOD of 0.16ngmL^-1, which is one order of magnitude lower than LOD specified by European Union legislation concerning the limit of OTA in food. Moreover, a matrix effect (caused by the occurrence of polyphenols in wine) and associated non-specific interactions with the sensor surface was completely eliminated by a simple pre-treatment of the wine with the addition of 3% poly(vinylpyrrolidone) (PVP).

Competitive inhibition assay for the detection of progesterone in dairy milk using a fiber optic SPR biosensor

Analytical methods that are often used for the quantification of progesterone in bovine milk include immunoassays and chromatographic techniques. Depending on the selected method, the main disadvantages are the cost, time-to-result, labor intensity and usability as an automated at-line device. This paper reports for the first time on a robust and practical method to quantify small molecules, such as progesterone, in complex biological samples using an automated fiber optic surface plasmon resonance (FO-SPR) biosensor. A FO-SPR competitive inhibition assay was developed to determine biologically relevant concentrations of progesterone in bovine milk (1-10 ng/mL), after optimizing the immobilization of progesterone-bovine serum albumin (P4-BSA) conjugate, the specific detection with anti-progesterone antibody and the signal amplification with goat anti-mouse gold nanoparticles (GAM-Au NPs). The progesterone was detected in a bovine milk sample with minimal sample preparation, namely ½ dilution of the sample. Furthermore, the developed bioassay was benchmarked against a commercially available ELISA, showing excellent agreement (R² = 0.95). Therefore, it is concluded that the automated FO-SPR platform can combine the advantages of the different existing methods for quantification of progesterone: sensitivity, accuracy, cost, time-to-result and ease-of-use.

Microfluidic Surface Plasmon Resonance Sensors: From Principles to Point-of-Care Applications

Surface plasmon resonance (SPR) is a label-free, highly-sensitive, and real-time sensing technique. Conventional SPR sensors, which involve a planar thin gold film, have been widely exploited in biosensing; various miniaturized formats have been devised for portability purposes. Another type of SPR sensor which utilizes localized SPR (LSPR), is based on metal nanostructures with surface plasmon modes at the structural interface. The resonance condition is sensitive to the refractive index change of the local medium. The principles of these two types of SPR sensors are reviewed and their integration with microfluidic platforms is described. Further applications of microfluidic SPR sensors to point-of-care (POC) diagnostics are discussed.

Chemical Sniffing Instrumentation for Security Applications

Border control for homeland security faces major challenges worldwide due to chemical threats from national and/or international terrorism as well as organized crime. A wide range of technologies and systems with threat detection and monitoring capabilities has emerged to identify the chemical footprint associated with these illegal activities. This review paper investigates artificial sniffing technologies used as chemical sensors for point-of-use chemical analysis, especially during border security applications. This article presents an overview of (a) the existing available technologies reported in the scientific literature for threat screening, (b) commercially available, portable (hand-held and stand-off) chemical detection systems, and (c) their underlying functional and operational principles. Emphasis is given to technologies that have been developed for in-field security operations, but laboratory developed techniques are also summarized as emerging technologies. The chemical analytes of interest in this review are (a) volatile organic compounds (VOCs) associated with security applications (e.g., illegal, hazardous, and terrorist events), (b) chemical "signatures" associated with human presence, and

Biosensors and nanobiosensors for therapeutic drug and response monitoring

Review of different biosensors and nanobiosensors increasingly used in therapeutic drug monitoring (TDM) for pharmaceutical drugs with dosage limitations or toxicity issues and for therapeutic response monitoring.

Advances in explosives analysis--part I: animal, chemical, ion, and mechanical methods

The number and capability of explosives detection and analysis methods have increased substantially since the publication of the Analytical and Bioanalytical Chemistry special issue devoted to Explosives Analysis (Moore and Goodpaster, Anal Bioanal Chem 395(2):245-246, 2009). Here we review and critically evaluate the latest (the past five years) important advances in explosives detection, with details of the improvements over previous methods, and suggest possible avenues towards further advances in, e.g., stand-off distance, detection limit, selectivity, and penetration through camouflage or packaging. The review consists of two parts. This part, Part I, reviews methods based on animals, chemicals (including colorimetry, molecularly imprinted polymers, electrochemistry, and immunochemistry), ions (both ion-mobility spectrometry and mass spectrometry), and mechanical devices. Part II will review methods based on photons, from very energetic photons including X-rays and gamma rays down to the terahertz range, and neutrons.

Chemical sensing with nanoparticles as optical reporters: from noble metal nanoparticles to quantum dots and upconverting nanoparticles

A wide variety of biological and medical analyses are based on the use of optical signals to report specific molecular events. Thanks to advances in nanotechnology, various nanostructures have been extensively used as optical reporters in bio- and chemical assays. This review describes recent progress in chemical sensing using noble metal nanoparticles (gold and silver), quantum dots and upconverting nanoparticles. It provides insights into various nanoparticle-based sensing strategies including fluorescence/luminescence resonance energy transfer nanoprobes as well as activatable probes sensitive to specific changes in the biological environment. Finally we list some research challenges to be overcome in order to accelerate the development of applications of nanoparticle bio- and chemical sensors.

Direct determination of a small-molecule drug, valproic Acid, by an electrically-detected microcantilever biosensor for personalized diagnostics

Direct, small-molecule determination of the antiepileptic drug, valproic acid, was investigated by a label-free, nanomechanical biosensor. Valproic acid has long been used as an antiepileptic medication, which is administered through therapeutic drug monitoring and has a narrow therapeutic dosage range of 50-100 μg·mL-1 in blood or serum. Unlike labeled and clinically-used measurement techniques, the label-free, electrical detection microcantilever biosensor can be miniaturized and simplified for use in portable or hand-held point-of-care platforms or personal diagnostic tools. A micromachined microcantilever sensor was packaged into the micro-channel of a fluidic system. The measurement of the antiepileptic drug, valproic acid, in phosphate-buffered saline and serum used a single free-standing, piezoresistive microcantilever biosensor in a thermally-controlled system. The measured surface stresses showed a profile over a concentration range of 50-500 μg·mL-1, which covered the clinically therapeutic range of 50-100 μg·mL-1. The estimated limit of detection (LOD) was calculated to be 45 μg·mL-1, and the binding affinity between the drug and the antibody was measured at around 90 ± 21 μg·mL-1. Lastly, the results of the proposed device showed a similar profile in valproic acid drug detection with those of the clinically-used fluorescence polarization immunoassay.