Investigation into the effect of varied functional biointerfaces on silicon nanowire MOSFETs

Nano-Brush Structure for Rapid Label-Free Differentiation of Alzheimer's Disease Stages and Direct Capture of Neuron-Derived Exosomes from Human Blood Plasma

The measurement of the neurofilament light chain (NFL) in human blood plasma/serum is a promising liquid biopsy for Alzheimer's disease (AD) diagnosis, offering advantages over conventional neuroimaging techniques recommended in clinical guidelines. Here, a controllable nano-brush structure comprising upstanding silicon nanowires coated with indium tin oxide was employed as the sensing substrate. This nano-brush structure was modified with an NFL antibody (NFLAb) via silane coupling and then further connected as the extended gate in a field-effect transistor (EGFET). Notable signal differences emerged within a 2 min timeframe, enabling the label-free differentiation in human blood plasmas among four distinct cohorts: healthy controls, subjective cognitive decline, mild cognitive impairment, and dementia due to AD. Our study indicates that achieving a surface roughness exceeding 400 nm on the modified nano-brush structure enables the effective electrical sensing in our EGFETs. These distinct electrical responses measured via the NFLAb-modified nano-brush EGFETs can be attributed to the combined effects of the captured NFLs and NFL-specific neuron-derived exosomes (NDEs) found in dementia patients, as confirmed by electron spectroscopy for chemical analysis, atomic force microscopy, and scanning electron microscopy. Finally, the potential of quantitatively detecting NDEs on the NFLAb-modified nano-brush structure was demonstrated using spiked solutions containing NFL-specific NDEs from IMR-32 neuroblast cells, wherein concentration-dependent changes were observed in the EGFETs output signal. Our findings show that the NFLAb-modified nano-brush EGFET enables rapid, label-free differentiation between healthy individuals and patients at varying stages of AD.

Hybrid Silicon Nanowire Devices and Their Functional Diversity

In the pool of nanostructured materials, silicon nanostructures are known as conventionally used building blocks of commercially available electronic devices. Their application areas span from miniaturized elements of devices and circuits to ultrasensitive biosensors for diagnostics. In this Review, the current trends in the developments of silicon nanowire-based devices are summarized, and their functionalities, novel architectures, and applications are discussed from the point of view of analog electronics, arisen from the ability of (bio)chemical gating of the carrier channel. Hybrid nanowire-based devices are introduced and described as systems decorated by, e.g., organic complexes (biomolecules, polymers, and organic films), aimed to substantially extend their functionality, compared to traditional systems. Their functional diversity is explored considering their architecture as well as areas of their applications, outlining several groups of devices that benefit from the coatings. The first group is the biosensors that are able to represent label-free assays thanks to the attached biological receptors. The second group is represented by devices for optoelectronics that acquire higher optical sensitivity or efficiency due to the specific photosensitive decoration of the nanowires. Finally, the so-called new bioinspired neuromorphic devices are shown, which are aimed to mimic the functions of the biological cells, e.g., neurons and synapses.

Photoluminescence Lifetime Based Investigations of Linker Mediated Electronic Connectivity Between Substrate and Nanoparticle

The evolution of systems based on nanoparticles as the main component seems to be a self-accelerating process during the last five decades. Hence, an overview across this field gets more and more challenging. It is sometimes rewarding to focus on the fundamental physical phenomenon of the electronic interconnection between the different building blocks of the obtained devices. Therefore, the investigation of charge transport among the utilized particles and their substrate is one of the mandatory steps in the development of semiconductor nanoparticle based devices like e.g., sensors and LEDs. The investigation of the influence of tunneling barriers on the properties of nanoparticle-functionalized surfaces is a challenging task. The different basic influences on the charge transport dynamics are often difficult to separate from each other. Non-invasive and easily viable experiments are still required to resolve the charge distributing mechanisms in the systems. In the presented work, we want to focus on thin and transparent indium tin oxide (ITO) layers covered glass slides since this substrate is frequently utilized in nanoelectronics. CdSe/CdS nanorods (NRs) are applied as an optically addressable probe for the electronic surface states of the conductive glass. The presented experimental design provides the proof of electronic interconnections in ITO coated glass/linker/NR electrodes via easy reproducible functionalization and polishing experiments. UV/Vis absorption and photoluminescence (PL) lifetime measurements revealed changes in the optical properties caused by differences in the charge carrier dynamics between the system. Our work is focused on the modification of charge carrier dynamics due to the application of linker molecules with different functional groups like (3-mercaptopropyl)methoxysilane (MPTMS) and (3-aminopropyl)trimethoxysilane (APTMS). The presented observations are explained with a simple kinetic model.

Nanowire-Based Sensors for Biological and Medical Applications

Nanomaterials such as nanowires, carbon nanotubes, and nanoparticles have already led to breakthroughs in the field of biological and medical sensors. The quantum size effects of the nanomaterials and their similarity in size to natural and synthetic nanomaterials are anticipated to improve sensor sensitivity dramatically. Nanowires are considered as key nanomaterials because of their electrical controllability for accurate measurement, and chemical-friendly surface for various sensing applications. This review covers the working principles and fabrication of silicon nanowire sensors. Furthermore, we review their applications for the detection of viruses, biomarkers, and DNA, as well as for drug discovery. Advances in the performance and functionality of nanowire sensors are also surveyed to highlight recent progress in this area. These advances include the improvements in reusability, sensitivity in high ionic strength solvent, long-term stability, and self-powering. Overall, with the advantages of ultra-sensitivity and the ease of fabrication, it is expected that nanowires will contribute significantly to the development of biological and medical sensors in the immediate future.

Non-Faradaic electrical impedimetric investigation of the interfacial effects of neuronal cell growth and differentiation on silicon nanowire transistors

Silicon nanowire field-effect transistor (SiNW FET) devices have been interfaced with cells; however, their application for noninvasive, real-time monitoring of interfacial effects during cell growth and differentiation on SiNW has not been fully explored. Here, we cultured rat adrenal pheochromocytoma (PC12) cells, a type of neural progenitor cell, directly on SiNW FET devices to monitor cell adhesion during growth and morphological changes during neuronal differentiation for a period of 5-7 d. Monitoring was performed by measuring the non-Faradaic electrical impedance of the cell-SiNW FET system using a precision LCR meter. Our SiNW FET devices exhibited changes in impedance parameters during cell growth and differentiation because of the negatively charged cell membrane, seal resistance, and membrane capacitance at the cell/SiNW interface. It was observed that during both PC12 cell growth and neuronal differentiation, the impedance magnitude increased and the phase shifted to more negative values. However, impedance changes during cell growth already plateaued 3 d after seeding, while impedance changes continued until the last observation day during differentiation. Our results also indicate that the frequency shift to above 40 kHz after growth factor induction resulted from a larger coverage of cell membrane on the SiNWs due to distinctive morphological changes according to vinculin staining. Encapsulation of PC12 cells in a hydrogel scaffold resulted in a lack of trend in impedance parameters and confirmed that impedance changes were due to the cells. Moreover, cytolysis of the differentiated PC12 cells led to significant changes in impedance parameters. Equivalent electrical circuits were used to analyze the changes in impedance values during cell growth and differentiation. The technique employed in this study can provide a platform for performing investigations of growth-factor-induced progenitor cell differentiation.

Selective and Reversible Binding of Thiol-Functionalized Biomolecules on Polymers Prepared via Chemical Vapor Deposition Polymerization

We use chemical vapor deposition polymerization to prepare a novel dibromomaleimide-functionalized polymer for selective and reversible binding of thiol-containing biomolecules on a broad range of substrates. We report the synthesis and CVD polymerization of 4-(3,4-dibromomaleimide)[2.2]paracyclophane to yield nanometer thick polymer coatings. Fourier transformed infrared spectroscopy and X-ray photoelectron spectroscopy confirmed the chemical composition of the polymer coating. The reactivity of the polymer coating toward thiol-functionalized molecules was confirmed using fluorescent ligands. As a proof of concept, the binding and subsequent release of cysteine-modified peptides from the polymer coating were also demonstrated via sum frequency generation spectroscopy. This reactive polymer coating provides a flexible surface modification approach to selectively and reversibly bind biomolecules on a broad range of materials, which could open up new opportunities in many biomedical sensing and diagnostic applications where specific binding and release of target analytes are desired.