Novel N-Doped Carbon Dots/β-Cyclodextrin Nanocomposites for Enantioselective Recognition of Tryptophan Enantiomers

Carbon Dots in Enantioselective Sensing

Chirality has a crucial effect on clinical, chemical and biological research since most bioactive compounds are chiral in the natural world. It is thus important to evaluate the enantiomeric ratio (or the enantiopurity) of the selected chiral analytes. To this purpose, fluorescence and electrochemical sensors, in which a chiral modifier is present, are reported in the literature. In this review, fluorescence and electrochemical sensors for enantiorecognition, in which chiral carbon dots (CDs) are used, are reported. Chiral CDs are a novel zero-dimensional carbon-based nanomaterial with a graphitic or amorphous carbon core and a chiral surface. They are nanoparticles with a high surface-to-volume ratio and good conductivity. Moreover, they have the advantages of good biocompatibility, multi-color emission, good conductivity and easy surface functionalization. Their exploitation in enantioselective sensing is the object of this review, in which several examples of fluorescent and electrochemical sensors, containing chiral CDs, are analyzed and discussed. A brief introduction to the most common synthetic procedures of chiral CDs is also reported, evidencing strengths and weaknesses. Finally, consideration concerning the potential challenges and future opportunities for the application of chiral CDs to the enantioselective sensing world are outlined.

Electrochemical Sensing Platform Based on Carbon Dots for the Simultaneous Determination of Theophylline and Caffeine in Tea

A simple and selective method for the determination of caffeine (CAF) and theophylline (THEO) has been developed for a glassy carbon electrode (GCE) modified with a composite including carbon dots (CDs) and chitosan (CS). To our knowledge, there are no previous studies that analyze a CDs-modified GCE for the presence of CAF and THEO. The electrochemical behavior of a GCE modified with a CDs-CS composite was studied in acidic medium by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Considering the sensor analytical parameters, the same linear concentrations range was found for CAF and THEO ranging from 1 × 10-5 to 5 × 10-3 mol L-1 with the same detection limit (LOD) of 1 × 10-6 mol L-1. The reproducibility and repeatability data were satisfactory in terms of RSD%. Moreover, the storage stability was evaluated, evidencing good results whatever the experimental conditions used. The developed sensor was applied for the simultaneous determination of CAF and THEO in tea and drug, and results were compared with those obtained with HPLC-ESI-MS in SIR mode as an independent method optimized on purpose. The electrochemical sensor presents the undoubled advantages in terms of cheapness, portability, and ease of use, since it does not require skilled personnel.

Genetically engineered bacterium-modified magnetic particles assisted chiral recognition and colorimetric determination of D/L-tryptophan in millets

Chiral recognition of enantiomers has always been a thorny issue since they exhibit the same properties under an achiral environment. Herein, polydopamine-functionalized magnetic particles (MP@PDA) were synthesized to immobilize the genetically engineered bacterium Escherichia coli DH5α (MP@PDA-E. coli). L-tryptophan (Trp) instead of D-Trp can be stereo-specifically degraded by tryptophanase in E. coli. The degradation product indole reacts with 4-dimethylaminobenzaldehyde to generate a rose-red adduct. Thus, MP@PDA-E. coli was employed to fabricate a chiral colorimetric method for chiral recognition and determination of L-Trp. The method averts the purification of tryptophanase. More importantly, tryptophanase demonstrates excellent enantioselective ability for L-Trp. The method can not only quantitatively detect L-Trp but also realize the measurement of the enantiomer percentage in the enantiomeric mixture. The feasibility was verified by detecting L-Trp in millet samples from different origins. Furthermore, a portable device was fabricated to make the method more convenient.

Highly Efficient versus Null Electrochemical Enantioselective Recognition Controlled by Achiral Colinkers in Homochiral Metal-Organic Frameworks

Chiral materials capable of electrochemical enantiomeric recognition are highly desirable for many applications, but it is still very challenging to achieve high recognition efficiency for lack of the knowledge of structure-property relationships. Here, we report the completely distinct enantiomeric recognition related to slightly different achiral colinkers in isomorphic homochiral metal-organic frameworks with the same chiral linker. Cu-TBPBe, for which the achiral colinker has two pyridyl rings connected by ─CH═CH─, shows excellent enantioselectivity and sensitivity for electrochemical recognition of l-tryptophan (Trp) with a detection limit of 3.16 nM. The l-to-d ratio of differential pulse voltammetric (DPV) currents reaches 53, which is much higher than the values (2-14) reported for previous electrochemical sensors. By contrast, Cu-TBPBa, in which the achiral colinker has -CH₂-CH₂- between pyridyl rings, is incapable of discrimination between l-Trp and d-Trp. Structural and spectral analyses suggest that the achiral conjugated colinker and the chiral moieties around it cooperate to produce a chiral pocket in favor of enantioselective adsorption through multiple hydrogen-bonding and π-π stacking interactions. The work demonstrated that Cu-TBPBe can be used to fabricate reliable electrochemical sensors for ultrasensitive quantification of Trp enantiomers in racemic mixtures and in complex biological systems such as urine. The work also highlights that an achiral coligand can be of vital importance in determining enantiomeric discrimination, opening up a new avenue for the design of chiral sensing materials.

Ligand as Buffer for Improving Chemical Stability of Coordination Polymers

Chemical stability is one of the key concerns in coordination polymers (CPs). However, technologies to protect CPs against acidic or alkaline aqueous environments have yet to be implemented. Herein we demonstrate an approach for improving the pH stability by utilizing the ligand salt as buffering site to modify the unsaturated coordination sites of CPs. For the selective one-dimensional CP Eu-d-DBTA (d-H₂DBTA = d-O,O'-dibenzoyltartaric acid) with a pH stability range of 6-8, the introduction of the ligand salt Na-d-DBTA extends the pH stability interval from 3 to 11. Crystallographic structure data reveal the formation of a Eu/Na-d-DBTA dynamic structure with Na-d-DBTA buffer sites on the Eu-O cluster of the Eu-d-DBTA skeleton. Benefiting from the dynamic single-crystal-to-single-crystal transformation, the buffer sites protect the skeleton from the impact of the acidic or alkaline aqueous environment. In addition, Eu/Na-d-DBTA produces stable photoluminescence properties and selective responses toward l-tryptophan (l-Trp) and further toward l-lysine (l-Lys) over the whole buffer capacity range of 3-11. Noticeably, other Ln/Na-d-DBTA CPs and star metal-organic frameworks also exhibit pH stability improvement when the ligand-as-buffer technology is used, which is significant for developing advanced inorganic-organic hybrid materials with superior functionality.

Efficient Removal of Siloxane from Biogas by Using β-Cyclodextrin-Modified Reduced Graphene Oxide Aerogels

In this study, β-cyclodextrin-modified reduced graphene oxide aerogels (β-CD-rGOAs) were synthesized via a one-step hydrothermal method and were used to remove hexamethyldisiloxane (L2) from biogas. The β-CD-rGOAs were characterized by the Brunner–Emmet–Teller technique, using Fourier-transform infrared spectroscopy, Raman spectrometry, scanning electron microscopy (SEM), contact angle measurements, and X-ray diffraction. The results of the characterizations indicate that β-CD was grafted onto the surface of rGOAs as a cross-linking modifier. The β-CD-rGOA had a three-dimensional, cross-linked porous structure. The maximum breakthrough adsorption capacity of L2 on β-CD-rGOA at 273 K was 111.8 mg g⁻¹. A low inlet concentration and bed temperature facilitated the adsorption of L2. Moreover, the β-CD-rGOA was regenerated by annealing at 80 °C, which renders this a promising material for removing L2 from biogas.

Electrochemical Amino Acid Sensing: A Review on Challenges and Achievements

The rapid growth of research in electrochemistry in the last decade has resulted in a significant advancement in exploiting electrochemical strategies for assessing biological substances. Among these, amino acids are of utmost interest due to their key role in human health. Indeed, an unbalanced amino acid level is the origin of several metabolic and genetic diseases, which has led to a great need for effective and reliable evaluation methods. This review is an effort to summarize and present both challenges and achievements in electrochemical amino acid sensing from the last decade (from 2010 onwards) to show where limitations and advantages stem from. In this review, we place special emphasis on five well-known electroactive amino acids, namely cysteine, tyrosine, tryptophan, methionine and histidine. The recent research and achievements in this area and significant performance metrics of the proposed electrochemical sensors, including the limit of detection, sensitivity, stability, linear dynamic range(s) and applicability in real sample analysis, are summarized and presented in separate sections. More than 400 recent scientific studies were included in this review to portray a rich set of ideas and exemplify the capabilities of the electrochemical strategies to detect these essential biomolecules at trace and even ultra-trace levels. Finally, we discuss, in the last section, the remaining issues and the opportunities to push the boundaries of our knowledge in amino acid electrochemistry even further.

Upcycling of exhausted reverse osmosis membranes into value-added pyrolysis products and carbon dots

Polymeric reverse osmosis (RO) membranes are widely used worldwide for production of fresh water from various sources, primarily ocean desalination. However, with limited service life, exhausted RO membrane modules often end up as plastic wastes disposed of predominantly by landfilling. It is imperative to find a feasible way to upcycle end-of-life RO membrane modules into valuable products. In this paper, the feasibility of RO membrane recycling via pyrolysis and subsequent conversion of resulting char into carbon dots (CDs) through H₂O₂-assisted hydrothermal method was investigated. RO membrane module pyrolysis at 600 °C produced oil (28 wt%), non-condensable gas (17 wt%), and char (22 wt%). While oil and gas can serve as fuel and chemical feedstock due to rich hydrocarbon content, char was found a suitable precursor for the synthesis of functional CDs. The resulting CDs doped with N (4.8%) and S (1.8%) exhibited excellent water dispersibility, narrow size distribution of 1.3-6.8 nm, high stability, and strong blue fluorescence with a quantum yield of 6.24%. CDs demonstrated high selectivity and sensitivity towards Fe³⁺ in the range of 0-100 μM with the limit of detection of 2.97 μM and were capable of determining Fe³⁺ in real water samples (tap water and pond water).

da Silva Alves D, Okeke C, Breslin CB. Cyclodextrins as Supramolecular Recognition Systems: Applications in the Fabrication of Electrochemical Sensors

Supramolecular chemistry, although focused mainly on noncovalent intermolecular and intramolecular interactions, which are considerably weaker than covalent interactions, can be employed to fabricate sensors with a remarkable affinity for a target analyte. In this review the development of cyclodextrin-based electrochemical sensors is described and discussed. Following a short introduction to the general properties of cyclodextrins and their ability to form inclusion complexes, the cyclodextrin-based sensors are introduced. This includes the combination of cyclodextrins with reduced graphene oxide, carbon nanotubes, conducting polymers, enzymes and aptamers, and electropolymerized cyclodextrin films. The applications of these materials as chiral recognition agents and biosensors and in the electrochemical detection of environmental contaminants, biomolecules and amino acids, drugs and flavonoids are reviewed and compared. Based on the papers reviewed, it is clear that cyclodextrins are promising molecular recognition agents in the creation of electrochemical sensors, chiral sensors, and biosensors. Moreover, they have been combined with a host of materials to enhance the detection of the target analytes. Nevertheless, challenges remain, including the development of more robust methods for the integration of cyclodextrins into the sensing unit.

Blue luminescent N,S-doped carbon dots encapsulated in red emissive Eu-MOF to form dually emissive composite for reversible anti-counterfeit ink

Lanthanide metal-organic frameworks (Ln-MOFs) have demonstrated great potential in luminescence sensing and optical anti-counterfeiting. High-security anti-counterfeiting technology is of great importance and requires the development of universal luminescent materials with multiple modes of emission and adjustable photoluminescence. Herein, a 3D red light emission microporous europium(iii) metal-organic framework [Eu₃(OH)(1,3-db)₂(H₂O)₄]·3H₂O (1) (1,3-db = 1,3-di(3',5'-dicarboxylpheny) benzene) was constructed from a zigzag [Eu₃(COO)₈] chain and π-electron-rich terphenyl-tetracarboxylate. Notably, the quenched fluorescence of 1 under hydrogen chloride vapor could be recovered upon fuming by a vapor of Et₃N. Most strikingly, the strong blue light emission by nitrogen and sulfur co-doped carbon dots (N,S-CDs) could be encapsulated in 1 to generate a dual-emission composite, namely, N,S-CDs@Eu-MOF, which shows solvent-dependent photoluminescence: N,S-CD-related blue luminescence in water and Eu-MOF-related red emission in organic solvents. Taking advantage of the above unique reversible fluorescent behavior, Eu-MOF and N,S-CDs@Eu-MOF are prepared as fluorescent high-security inks to achieve data encryption and decryption on specific flower patterns.

Carbon dot-based composites for catalytic applications

We summarize the construction methods and influencing factors of CDs-based composites and discuss their catalytic applications, including photocatalysis, chemical catalysis, peroxidase-like catalysis, Fenton-like catalysis and electrocatalysis.

A Solid-state Electrochemiluminescence Sensor for Detecting Glutathione with a Graphite-phase Carbon Nitride/Silica Modified Glassy Carbon Electrode

A solid-state electrochemiluminescence (ECL) sensor for the detection of reduced glutathione (GSH) based on a g-C₃N₄/SiO₂ modified glass carbon electrode (GCE) has been developed in this research. The g-C₃N₄, which is employed as a luminophore, is simply prepared and exhibits an excellent ECL response. Mesoporous silica hollow spheres (SiO₂) with a large specific surface area are introduced here to increase the loading amount of g-C₃N₄. Compared to a g-C₃N₄ modified GCE, the g-C₃N₄/SiO₂ modified GCE displays a much higher ECL intensity. A high enhancement effect on the ECL intensity of g-C₃N₄/SiO₂ modified GCE is obtained in the presence of GSH in the electrolyte. Moreover, the enhanced ECL intensity shows a good linear relationship to the GSH concentration in the range from 1.0 × 10^-7 to 5.0 × 10^-4 M, with a detection limit of 2.0 × 10^-8 M (6.1 ng/mL). Besides, the ECL sensor exhibits a good anti-interference ability and has been successfully applied in the detection of GSH in commercial samples. The proposed sensor provides a promising platform for life science.

Gram-scale synthesis of nitrogen doped graphene quantum dots for sensitive detection of mercury ions and l-cysteine

Sensitive and reliable detection of mercury ions (Hg²⁺) and l-cysteine (l-Cys) is of great significance for toxicology assessment, environmental protection, food analysis and human health. Herein, we present gram-scale synthesis of nitrogen doped graphene quantum dots (N-GQDs) for sensitive detection of Hg²⁺ and l-Cys. The N-GQDs are one-step synthesized using bottom-up molecular fusion in a hydrothermal process with gram-scale yield at a single run. N-GQDs exhibit good structural characteristics including uniform size (∼2.1 nm), high crystallinity, and single-layered graphene thickness. Successful doping of N atom enables bright blue fluorescence (absolute photoluminescence quantum yield of 24.8%) and provides unique selectivity towards Hg²⁺. Based on the fluorescence quenching by Hg²⁺ (turn-off mode), N-GQDs are able to serve as an effective fluorescent probe for sensitive detection of Hg²⁺ with low limit of detection (19 nM). As l-Cys could recover the fluorescence of N-GQDs quenched by Hg²⁺, fluorescent detection of l-Cys is also demonstrated using turn-off-on mode.

One-step and gram-scale synthesis of nitrogen doped graphene quantum dots is realized for their sensitive detection of Hg²⁺ and l-Cys.

A chiral responsive carbon dots-gold nanoparticle complex mediated by hydrogen peroxide independent of surface modification with chiral ligands

Chiral recognition of enantiomers is fundamentally important. In this study, a novel strategy for the chiral discrimination of glucose enantiomers was constructed based on the hydrogen peroxide (H₂O₂)-mediated generation of a carbon dots-gold nanoparticle (C-dots@Au NP) complex independent of surface modification with chiral ligands. H₂O₂ is essential as a reductant to promote the growth of Au NPs from gold salts. Besides, the modification of C-dots with sulfhydryl groups is necessary for its anchoring on the surface of Au NPs. Therefore, in the presence of H₂O₂, the C-dots@Au NP complex can be self-generated from a simple mixture containing C-dots and Au salts. It is worth noting that glucose oxidase can selectively catalyze d-glucose but not l-glucose to generate H₂O₂. In this regard, the chiral recognition process can trigger the formation of the C-dots@Au NP complex. Furthermore, based on the production of reddish Au NPs and the reduction of C-dot fluorescence quenched by Au NPs, the resultant C-dots@Au NP complex enables achieving the chiral discrimination of glucose enantiomers by combining colorimetric and fluorometric assays. Compared with the conventional approaches that use chiral ligands to decorate NPs, the generation of the chiral-responsive C-dots@Au NP complex is much simpler and faster. Upon combination with specific enzymatic reactions that produce a reductive product, the current strategy provides a general approach for the identification of chiral enantiomers.

A label-free and ultrasensitive electrochemical aptasensor for lead(ii) using a N,P dual-doped carbon dot-chitosan composite as a signal-enhancing platform and thionine as a signaling molecule

Herein, a label-free and ultrasensitive electrochemical aptasensor for the determination of lead(ii) (Pb2+) was described. It was based on the application of a N,P dual-doped carbon dot-chitosan (N,P-CD-CS) composite as the signal molecule carrier and an aptamer (APT) as the specific binding probe for Pb2+ that were self-assembled on the surface of a gold electrode (GE). 6-Mercapto-1-hexanol (MCH) was used to block the nonspecific binding sites, and the electro-active molecule thionine (THi) was used as the signaling probe. The differential pulse voltammetry (DPV) response of THi at a rather low working potential of -0.17 V (vs. Ag/AgCl) was used to detect Pb2+. The electrochemical performances of the resulting modified electrode were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Under optimal experimental conditions, the modified electrode exhibited excellent DPV response depending on the concentration of Pb2+ in the 0.01 nM to 10 nM range. The limit of detection was 3.8 pM (at S/N = 3). The modified electrode displayed good reproducibility and excellent stability. It was successfully applied for the determination of Pb2+ in real water samples.

Green, Hydrothermal Synthesis of Fluorescent Carbon Nanodots from Gardenia, Enabling the Detection of Metronidazole in Pharmaceuticals and Rabbit Plasma

Strong fluorescent carbon nanodots (FCNs) were synthesized with a green approach using gardenia as a carbon source through a one-step hydrothermal method. FCNs were characterized by their UV-vis absorption spectra, photoluminescence (PL), Fourier transform infrared spectroscopy (FTIR) as well as X-ray photoelectron spectroscopy (XPS). We further explored the use of as-synthesized FCNs as an effective probe for the detection of metronidazole (MNZ), which is based on MNZ-induced fluorescence quenching of FCNs. The proposed method displayed a wide linear range from 0.8 to 225.0 µM with a correlation coefficient of 0.9992 and a limit of detection as low as 279 nM. It was successfully applied to the determination of MNZ in commercial tablets and rabbit plasma with excellent sensitivity and selectivity, which indicates its potential applications in clinical analysis and biologically related studies.

Molecular recognition of N-acetyltryptophan enantiomers by β-cyclodextrin

The enantioselectivity of β-cyclodextrin (β-CD) towards L- and D-N-acetyltryptophan (NAcTrp) has been studied in aqueous solution and the crystalline state. NMR studies in solution show that β-CD forms complexes of very similar but not identical geometry with both L- and D-NAcTrp and exhibits stronger binding with L-NAcTrp. In the crystalline state, only β-CD–L-NAcTrp crystallizes readily from aqueous solutions as a dimeric complex (two hosts enclosing two guest molecules). In contrast, crystals of the complex β-CD–D-NAcTrp were never obtained, although numerous conditions were tried. In aqueous solution, the orientation of the guest in both complexes is different than in the β-CD–L-NAcTrp complex in the crystal. Overall, the study shows that subtle differences observed between the β-CD–L,D-NAcTrp complexes in aqueous solution are magnified at the onset of crystallization, as a consequence of accumulation of many soft host–guest interactions and of the imposed crystallographic order, thus resulting in very dissimilar propensity of each enantiomer to produce crystals with β-CD.