Gold Electrodes Modified with Calix[4]arene for Electrochemical Determination of Dopamine in the Presence of Selected Neurotransmitters

Novel An Efficient Fluorescent Probe Based on Calix[4]triazacrown-5 With Naphthalimide Group for Co2+, Cd2+ and Dopamine Detection

A novel naphthalimide-substituted calix[4]triazacrown-5 (Nap-Calix) at cone conformation was designed and synthesized to employ as a fluorescent probe, which enables the simultaneously detection of Co2+ and Cd2+ metal ions as well as dopamine (DA). 1H-NMR, 13C-NMR, ESI-MS and elemental analysis techniques were carried out to characterize its structure. Cation binding property of Nap-Calix against various metal ions such as Ba2+, Co2+, Ni2+, Pb2+, Zn2+, and Cd2+ exhibited that the sensor selectively binds to Co2+ and Cd2+ metal ions with a remarkable affinity. Introduction of Co2+ and Cd2+ metal ions to a solution of Nap-Calix in DMF/water (1:1, v/v) resulted with a new emission band at 370 nm when excited at 283 nm. In addition, the fluorescence sensing affinity of the probe Nap-Calix against a catecholamine neurotransmitter (dopamine) was investigated in a wide range of concentration of DA (0-0.1 mmol L-1) in 50% DMF/PBS (pH = 5.0). The fluorescence intensity of Nap-Calix, with excitation/emission peaks at 283/327 nm, is highly enhanced by DA. It was also observed that Nap-Calix exhibits excellent fluorescence behavior towards DA with a very low detection limit as 0.21 µmol L-1.

Flow-Through Amperometric Biosensor System Based on Functionalized Aryl Derivative of Phenothiazine and PAMAM-Calix-Dendrimers for the Determination of Uric Acid

A flow-through biosensor system for the determination of uric acid was developed on the platform of flow-through electrochemical cell manufactured by 3D printing from poly(lactic acid) and equipped with a modified screen-printed graphite electrode (SPE). Uricase was immobilized to the inner surface of a replaceable reactor chamber. Its working volume was reduced to 10 μL against a previously reported similar cell. SPE was modified independently of the enzyme reactor with carbon black, pillar[5]arene, poly(amidoamine) dendrimers based on the p-tert-butylthiacalix[4]arene (PAMAM-calix-dendrimers) platform and electropolymerized 3,7-bis(4-aminophenylamino) phenothiazin-5-ium chloride. Introduction of the PAMAM-calix-dendrimers into the electrode coating led to a fivefold increase in the redox currents of the electroactive polymer. It was found that higher generations of the PAMAM-calix-dendrimers led to a greater increase in the currents measured. Coatings consisted of products of the electropolymerization of the phenothiazine with implemented pillar[5]arene and PAMAM-calix-dendrimers showing high efficiency in the electrochemical reduction of hydrogen peroxide that was formed in the enzymatic oxidation of uric acid. The presence of PAMAM-calix-dendrimer G2 in the coating increased the redox signal related to the uric acid assay by more than 1.5 times. The biosensor system was successfully applied for the enzymatic determination of uric acid in chronoamperometric mode. The following optimal parameters for the chronoamperometric determination of uric acid in flow-through conditions were established: pH 8.0, flow rate 0.2 mL·min-1, 5 U of uricase per reactor. Under these conditions, the biosensor system made it possible to determine from 10 nM to 20 μM of uric acid with the limit of detection (LOD) of 4 nM. Glucose (up to 1 mM), dopamine (up to 0.5 mM), and ascorbic acid (up to 50 μM) did not affect the signal of the biosensor toward uric acid. The biosensor was tested on spiked artificial urine samples, and showed 101% recovery for tenfold diluted samples. The ease of assembly of the flow cell and the low cost of the replacement parts make for a promising future application of the biosensor system in routine clinical analyses.

Synthesis and validation of ultrasensitive stripping voltammetric sensor based on polypyrrole@ZnO/Fe3O4 core-shell nanostructure for picomolar detection of artesunate and dopamine drugs

A stripping voltammetric sensor for ultrasensitive detection of artesunate (ART) and dopamine HCl (DA) has been successfully developed using a Ppy@ZnO/Fe₃O₄ core-shell nanocomposite ([PZM])-modified carbon paste sensor (MCPS). Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, dynamic light scattering, Brunauer-Emmett-Teller surface area method, and high-resolution transmission electron microscopy were used to characterize the physicochemical properties of the nanomaterials. Noteworthily, the morphology of [PZM] reveals a spherical core-shell nanostructure with an increase in the average diameter range of 20-37.5 nm (specific surface area (SSA) of 28.5 m² g^-1 (0.0247 cm³ g^-1)) when compared with the average diameter range 7.5-15.7 nm (SSA of 5.43 m² g^-1 (0.0111 cm³ g^-1)) of ZnO/Fe₃O₄[ZM]. The [PZM] MCPS provided the best electroactive surface area (0.078 cm²) and the least electrocatalytic activity (R_st = 370 Ω). Furthermore, the MCPS showed low detection limits (LODs) of 0.092 pg mL^-1 (0.24 pM) and 0.0046 pg mL^-1 (0.03 pM) for ART and DA, respectively. Moreover, LODs were found to be 0.029 pg mL^-1 (0.75 pM) and 0.014 pg mL^-1 (0.09 pM) for ART mixed with 0.7 pM of DA (ART₁) and DA in the presence of 2.0 pM of ART drug (DA₁), respectively. In addition, the MCPS revealed a proper repeatability, reproducibility, and storage stability (93.5-90.48%). During the routine analysis, the [PZM] MCPS detected ART and DA concentrations in human urine, without interference.

Electrochemical detection of an antibiotic drug chloramphenicol based on a graphene oxide/hierarchical zinc oxide nanocomposite

Electrochemical detection of chloramphenicol (CAP) based on a graphene oxide hierarchical zinc oxide nanocomposite.