A Review of Microfiber-Based Temperature Sensors

A capillary-aided microfiber Bragg grating pH sensor for hydrovoltaic technology

Hydrovoltaic is an emerging technology that aims to harvest energy from water flow and evaporation, in which the plasmonic hydrogen ions are generated by the interaction between water and hydrovoltaic device. However, the volume of the water sample for the interaction is usually ultra-small due to the compact size of hydrovoltaic device, making the quantification and characterization of the hydrogen ions in such water sample an elusive goal. To address this issue, a miniature fiber-optic pH probe is proposed using a unilaterally tapered-microfiber Bragg grating. The microfiber Bragg grating has an intrinsic Bragg reflection signal with a narrow linewidth. The fiber probe is functionalized by coating the sodium alginate, which can respond to the variation of pH mediated by the alteration of the hydrophilicity. The rigidity and robustness of microfiber Bragg grating facilitates the encapsulation of the sensor into a sampling capillary, allowing for the detection of trace aqueous sample less than 2 μL. The pH sensitivity of the tapered-μFBG-based sensor is 62.8 p.m./pH (R2 = 0.995) with a limit resolution of 0.096 pH. The sensor performed a practical application in the monitoring and characterization of the hydrovoltaic microdevice, which can generate microcurrent as soaked in the water. This work demonstrates a promising technology in the fields of materials, energy, biology and medicine, in which the detection of the microsamples is inevitable.

Marriage of a Dual-Plasmonic Interface and Optical Microfiber for NIR-II Cancer Theranostics

The use of light as a powerful tool for disease treatment has introduced a new era in tumor treatment and provided abundant opportunities for light-based tumor theranostics. This work reports a photothermal theranostic fiber integrating cancer detection and therapeutic functions. Its self-heating effect can be tuned at ultralow powers and used for self-heating detection and tumor ablation. The fiber, consisting of a dual-plasmonic nanointerface and an optical microfiber, can be used to distinguish cancer cells from normal cells, quantify cancer cells, perform hyperthermal ablation of cancer cells, and evaluate the ablation efficacy. Its cancer cell ablation rate reaches 89% in a single treatment. In vitro and in vivo studies reveal quick, deep-tissue photonic hyperthermia in the NIR-II window, which can markedly ablate tumors. The marriage of a dual-plasmonic nanointerface and an optical microfiber presents a novel paradigm in photothermal therapy, offering the potential to surmount the challenges posed by limited light penetration depth, nonspecific accumulation in normal tissues, and inadvertent damage in current methods. This work thus provides insight for the exploration of an integrated theranostic platform with simultaneous functions in cancer diagnostics, therapeutics, and postoperative monitoring for future practical applications.

Label-Free Biochemical Sensing Using Processed Optical Fiber Interferometry: A Review

Over the last 20 years, optical fiber-based devices have been exploited extensively in the field of biochemical sensing, with applications in many specific areas such as the food processing industry, environmental monitoring, health diagnosis, bioengineering, disease diagnosis, and the drug industry due to their compact, label-free, and highly sensitive detection. The selective and accurate detection of biochemicals is an essential part of biosensing devices, which is to be done through effective functionalization of highly specific recognition agents, such as enzymes, DNA, receptors, etc., over the transducing surface. Among many optical fiber-based sensing technologies, optical fiber interferometry-based biosensors are one of the broadly used methods with the advantages of biocompatibility, compact size, high sensitivity, high-resolution sensing, lower detection limits, operating wavelength tunability, etc. This Review provides a comprehensive review of the fundamentals as well as the current advances in developing optical fiber interferometry-based biochemical sensors. In the beginning, a generic biosensor and its several components are introduced, followed by the fundamentals and state-of-art technology behind developing a variety of interferometry-based fiber optic sensors. These include the Mach-Zehnder interferometer, the Michelson interferometer, the Fabry-Perot interferometer, the Sagnac interferometer, and biolayer interferometry (BLI). Further, several technical reports are comprehensively reviewed and compared in a tabulated form for better comparison along with their advantages and disadvantages. Further, the limitations and possible solutions for these sensors are discussed to transform these in-lab devices into commercial industry applications. At the end, in conclusion, comments on the prospects of field development toward the commercialization of sensor technology are also provided. The Review targets a broad range of audiences including beginners and also motivates the experts helping to solve the real issues for developing an industry-oriented sensing device.

Micromechanically-Powered Rolling Locomotion of a Twisted-Crystal Optical-Waveguide Cavity as a Mobile Light Polarization Rotor

We demonstrate mechanically-powered rolling locomotion of a twisted-microcrystal optical-waveguide cavity on the substrate, rotating the output signal's linear-polarization. Self-assembly of (E)-2-bromo-6-(((4-methoxyphenyl)imino)methyl)-4-nitrophenol produces naturally twisted microcrystals. The strain between several intergrowing, orientationally mismatched nanocrystalline fibres dictates the pitch lengths of the twisted crystals. The crystals are flexible, perpendicular to twisted (001) and (010) planes due to π⋅⋅⋅π stacking, C-H⋅⋅⋅Br, N-H⋅⋅⋅O and C-H⋅⋅⋅O interactions. The twisted crystals in their straight and bent geometries guide fluorescence along their body axes and display optical modes. Depending upon the degree of mechanical rolling locomotion, the crystal-waveguide cavity correspondingly rotates the output signal polarization. The presented twisted-crystal cavity with a combination of mechanical locomotion and photonic attributes unfolds a new dimension in mechanophotonics.

Highly Sensitive Photothermal Fiber Sensor Based on MXene Device and Vernier Effect

A photothermal fiber sensor based on a microfiber knot resonator (MKR) and the Vernier effect is proposed and demonstrated. An MXene Ti₃C₂T_x nanosheet was deposited onto the ring of an MKR using an optical deposition method to prepare photothermal devices. An MXeneMKR and a bare MKR were used as the sensing part and reference part, respectively, of a Vernier-cascade system. The optical and photothermal properties of the bare MKR and the MXeneMKR were tested. Ti₃C₂T_x was applied to a photothermal fiber sensor for the first time. The experimental results showed that the modulation efficiency of the MXeneMKR was 0.02 nm/mW, and based on the Vernier effect, the modulation efficiency of the cascade system was 0.15 nm/mW. The sensitivity was amplified 7.5 times. Our all-fiber photothermal sensor has many advantages such as low cost, small size, and good system compatibility. Our sensor has broad application prospects in many fields. The proposed stable MKR device based on two-dimensional-material modification provides a new solution for improving the sensitivity of optical fiber sensors.

Microscopic imaging along tapered optical fibers by right-angle Rayleigh light scattering in linear and nonlinear regime

The evolution of the light intensity along an optical waveguide is evaluated by analysing far-field right-angle Rayleigh light scattering. The method is based on point by point spectral mapping distributed along the optical waveguide with a micrometric spatial resolution given by a confocal microscope, a high spectral resolution given by a spectrometer, and a high signal-to-noise ratio given by a highly cooled detector. This non-destructive and non-invasive experimental method allows the observation of the general Rayleigh scattering profile of the optical waveguide in a nominal operation, i.e., whatever the power or the wavelength of the light source, and can be applied to micrometer-scale waveguides of several centimeters in length, for which the longitudinal characterization is challenging. Applied to a tapered optical fiber, called nanofiber, with submicrometer final diameter and several centimeters long, the method has proved its capacity to collect different optical characteristics such as optical losses, mode beatings, transition from core-cladding to cladding-air guidance for different modes, localization of punctual defects, leaking of high order modes no longer guided by the fiber. Furthermore, the experimental results are successfully compared to measurements provided by the state-of-the-art Optical Backscatter Reflectometer system, and to numerical simulations. Moreover, coupled to the spectral resolution of the spectrometer, the method have allowed the distributed measurements of the Raman cascading process along the nanofiber, for the first time to our knowledge. The experimental technique developed in this work is complementary to other characterization methods generally focused on the optical parameters of the waveguide input or output. This technique can also be extended to others waveguides whatever its geometry which represents a strong interest for deepen optical characterization of photonics waveguides, or for other optical regimes characterized by spectral evolution of the field propagating along the waveguide.

Effects of Tungsten Disulphide Coating on Tapered Microfiber for Relative Humidity Sensing Applications

Tungsten disulphide (WS₂) is a two-dimensional transition-metal dichalcogenide material that can be used to improve the sensitivity of a variety of sensing applications. This study investigated the effect of WS₂ coating on tapered region microfiber (MF) for relative humidity (RH) sensing applications. The flame brushing technique was used to taper the standard single-mode fiber (SMF) into three different waist diameter sizes of MF 2, 5, and 10 µm, respectively. The MFs were then coated with WS₂ via a facile deposition method called the drop-casting technique. Since the MF had a strong evanescent field that allowed fast near-field interaction between the guided light and the environment, depositing WS₂ onto the tapered region produced high humidity sensor sensitivity. The experiments were repeated three times to measure the average transmitted power, presenting repeatability and sensing stability. Each MF sample size was tested with varying humidity levels. Furthermore, the coated and non-coated MF performances were compared in the RH range of 45–90% RH at room temperature. It was found that the WS₂ coating on 2 µm MF had a high sensitivity of 0.0861 dB/% RH with linearity over 99%. Thus, MF coated with WS₂ encourages enhancement in the evanescent field effect in optical fiber humidity sensor applications.

Wavelength Dependent Graphene Oxide-Based Optical Microfiber Sensor for Ammonia Gas

Ammonia detection in ambient air is critical, given its implication on the environment and human health. In this work, an optical fiber tapered to a 20 µm diameter and coated with graphene oxide was developed for absorbance response monitoring of ammonia at visible (500-700 nm) and near-infrared wavelength regions (700-900 nm). The morphology, surface characteristics, and chemical composition of the graphene oxide samples were confirmed by a field emission scanning electron microscope, an atomic force microscope, X-ray diffraction, and an energy dispersion X-ray. The sensing performance of the graphene oxide-coated optical microfiber sensor towards ammonia at room temperature revealed better absorbance response at the near-infrared wavelength region compared to the visible region. The sensitivity, response and recovery times at the near-infrared wavelength region were 61.78 AU/%, 385 s, and 288 s, respectively. The sensitivity, response and recovery times at the visible wavelength region were 26.99 AU/%, 497 s, and 192 s, respectively. The selectivity of the sensor towards ammonia was affirmed with no response towards other gases.

Thermo-Optical Switching Effect Based on a Tapered Optical Fiber and Higher Alkanes Doped with ZnS:Mn

The paper investigates the effect of thermo-optic switching resulting from the hybrid combination of a tapered optical fiber (TOF) with alkanes doped with nanoparticles of zinc sulfide doped with manganese (ZnS:Mn NP). Presented measurements focused on controlling losses in an optical fiber by modification of a TOF cladding by the alkanes used, characterized by phase change. Temperature changes cause power transmission changes creating a switcher or a sensor working in an ON-OFF mode. Phase change temperatures and changes in the refractive index of the alkane used directly affected power switching. Alkanes were doped with ZnS:Mn NPs to change the hysteresis observed between ON-OFF modes in pure alkanes. The addition of nanoparticles (NPs) reduces the difference between phase changes due to improved thermal conductivity and introduces extra nucleating agents. Results are presented in the wide optical range of 550-1200 nm. In this investigation, hexadecane and heptadecane were a new cladding for TOF. The higher alkanes were doped with ZnS: Mn NPs in an alkane volume of 1 wt.% and 5 wt.%. The thermo-optic effect can be applied to manufacture a thermo-optic switcher or a temperature threshold sensor.

Mechanophotonics: Flexible Single-Crystal Organic Waveguides and Circuits

We present the one-dimensional optical-waveguiding crystal dithieno[3,2-a:2',3'-c]phenazine with a high aspect ratio, high mechanical flexibility, and selective self-absorbance of the blue part of its fluorescence (FL). While macrocrystals exhibit elasticity, microcrystals deposited at a glass surface behave more like plastic crystals due to significant surface adherence, making them suitable for constructing photonic circuits via micromechanical operation with an atomic-force-microscopy cantilever tip. The flexible crystalline waveguides display optical-path-dependent FL signals at the output termini in both straight and bent configurations, making them appropriate for wavelength-division multiplexing technologies. A reconfigurable 2×2-directional coupler fabricated via micromanipulation by combining two arc-shaped crystals splits the optical signal via evanescent coupling and delivers the signals at two output terminals with different splitting ratios. The presented mechanical micromanipulation technique could also be effectively extended to other flexible crystals.

Micro-/Nanofiber Optics: Merging Photonics and Material Science on Nanoscale for Advanced Sensing Technology

Micro-/nanofibers (MNFs) are optical fibers with diameters close to or below the wavelength of the guided light. These tiny fibers can offer engineerable waveguiding properties including optical confinement, fractional evanescent fields, and surface intensity, which is very attractive to optical sensing on the micro-/nano scale. In this review, we first introduce the basics of MNF optics and MNF optical sensors from physical and chemical to biological applications and review the progress and current status of this field. Then, we review and discuss hybrid MNF structures for advanced optical sensing by merging MNFs with functional structures including chemical indicators, quantum dots, dye molecules, plasmonic nanoparticles, 2-D materials, and optofluidic chips. Thirdly, we introduce the emerging trends in developing MNF-based advanced sensing technology for ultrasensitive, active, and wearable sensors and discuss the future prospects and challenges in this exciting research field. Finally, we end the review with a brief conclusion.

Demonstration of the evanescent Kerr effect in optical nanofibers

Optical nanofibers have recently emerged as attractive nanophotonic platforms for many applications ranging from quantum technologies to nonlinear optics, due to both their tight optical confinement and their wide evanescent field. Herein we examine theoretically the optical Kerr effect induced by the evanescent field of a silica nanofiber surrounded by different nonlinear liquids such as water, ethanol and acetone and we further compare them with air cladding. Our results show that the evanescent Kerr effect significantly dominates the usual Kerr effect inside the silica core for sub-wavelength diameters below 560 nm, using acetone. We further report the observation of the evanescent Kerr effect through surrogate measurements of stimulated Raman-Kerr scattering (SRKS) in an acetone-immersed silica nanofiber. Our findings open the way towards potential applications of optical nanofibers to ultra-sensitive liquid sensing or to enhancing the nonlinear effects through the evanescent field.

A Polymer Asymmetric Mach-Zehnder Interferometer Sensor Model Based on Electrode Thermal Writing Waveguide Technology

This paper presents a novel electrode thermal writing waveguide based on a heating-induced refractive index change mechanism. The mode condition and the electrode thermal writing parameters were optimized, and the output patterns of the optical field were obtained in a series of simulations. Moreover, the effect of various adjustments on the sensing range of the nanoimprint M–Z temperature sensor was analyzed theoretically. A refractive index asymmetry Mach–Zehnder (M–Z) waveguide sensor with a tunable refractive index for a waveguide core layer was simulated with a length difference of 946.1 µm. The optimal width and height of the invert ridge waveguide were 2 μm and 2.8 μm, respectively, while the slab thickness was 1.2 μm. The sensing accuracy was calculated to range from 2.0896 × 10⁴ to 5.1252 × 10⁴ in the 1.51–1.54 region. The sensing fade issue can be resolved by changing the waveguide core refractive index to 0.001 via an electrode thermal writing method. Thermal writing a single M–Z waveguide arm changes its refractive index by 0.03. The sensor’s accuracy can be improved 1.5 times by the proposed method. The sensor described in this paper shows great prospects in organism temperature detection, molecular analysis, and biotechnology applications.

Transmission of optical vortices through fiber loop resonators

In this Letter, we study the propagation of optical vortices (OVs) through the loop resonator (LR) on a multimode fiber. We demonstrate the existence of a special resonance, which is in the inversion of the topological charge of the transmitted OV. Near the resonance, the output orbital angular momentum (OAM) is sensitive to wavelength-scale variations of the LR's optical path length, which can be used for super-efficient OAM control. We also show the feasibility of a combined wavelength and OAM division multiplexing in comb filters on such LRs.

A Temperature Fiber Sensor Based on Tapered Fiber Bragg Grating Fabricated by Femtosecond Laser

A temperature fiber sensor based on tapered fiber Bragg grating (tapered FBG) fabricated by femtosecond laser has been proposed and realized with good reproducibility. Firstly, the fiber taper with 25 μm diameter and 1000 μm length is fabricated by arc-discharge elongation using two standard single-mode fibers. Secondly, two first-order FBGs are fabricated in tapered and non-tapered fiber regions for comparison. Both FBGs are point-by-point direct-written by femtosecond laser, and the grating lengths are 1000 μm. Thirdly, a temperature experiment is performed using a heating chamber, and experimental results show that in the range of 30~350 °C, the temperature sensitivity of the tapered FBG has increased from 11.0 pm/°C to 12.3 pm/°C. The tapered FBG proposed here can be further configured for sensing other parameters in physical, chemical, and biomedical applications.