Love Wave Sensors with Silver Modified Polypyrrole Nanoparticles for VOCs Monitoring

Recent Advances in SAW Sensors for Detection of Cancer Biomarkers

Surface acoustic wave (SAW) sensor technology is a promising approach to diagnosing cancer through the detection of cancer biomarkers due to its high sensitivity, potential label-free operation, and fast response times, and, fundamentally, because it is a non-invasive technique in comparison with the current traditional diagnostic techniques for cancer. This review focuses on this application, and for this purpose, the recent literature on cancer biomarkers detected by this advanced technology has been compiled, including that on volatile organic compounds (VOCs) from exhaled breath and larger biomolecules such as proteins, DNA, and microRNAs in body fluids, which demonstrates its great versatility. The conventional techniques for cancer biomarker detection in biofluids, such as ELISA, PCR, SPR, and UV absorbance, exhibit limitations including high costs, slow response times, a reduced sensitivity, the need for specialized instrumentation, and the requirement for highly trained personnel. Different SAW sensor configurations are discussed with attention paid to their specific properties, wave propagation modes, and suitability for different environments. Detailed studies are reviewed, highlighting biomarkers for lung, colorectal, prostate, breast, and ovarian cancer diagnostics, as well as the detection of circulating tumor cells and cancerous cell growth. This review identifies current challenges, including optimizing sensitivity, addressing environmental interferences, and the need for clinical validation. Finally, future research directions are proposed, emphasizing the use of VOC biomarkers and the integration of SAW technology into hybrid systems and microfluidic platforms to enable the creation of scalable, non-invasive diagnostic tools for the detection of cancer in early stages, and, in this way, to minimize the morbidity and mortality associated with this disease.

Advances in 2D Materials Based Gas Sensors for Industrial Machine Olfactory Applications

The escalating development and improvement of gas sensing ability in industrial equipment, or "machine olfactory", propels the evolution of gas sensors toward enhanced sensitivity, selectivity, stability, power efficiency, cost-effectiveness, and longevity. Two-dimensional (2D) materials, distinguished by their atomic-thin profile, expansive specific surface area, remarkable mechanical strength, and surface tunability, hold significant potential for addressing the intricate challenges in gas sensing. However, a comprehensive review of 2D materials-based gas sensors for specific industrial applications is absent. This review delves into the recent advances in this field and highlights the potential applications in industrial machine olfaction. The main content encompasses industrial scenario characteristics, fundamental classification, enhancement methods, underlying mechanisms, and diverse gas sensing applications. Additionally, the challenges associated with transitioning 2D material gas sensors from laboratory development to industrialization and commercialization are addressed, and future-looking viewpoints on the evolution of next-generation intelligent gas sensory systems in the industrial sector are prospected.

CuMoO4 nanorods-based acetone chemiresistor-enabled non-invasive breathomic-diagnosis of human diabetes and environmental monitoring

A nano-enabled low-trace monitoring system for acetone has the potential to revolutionize breath omics-based non-invasive diagnosis of human diabetes and environmental monitoring technologies. This unprecedented study presents the state-of-the-art facile and economic template-assisted hydrothermal route to fabricate novel CuMoO₄ nanorods for room temperature breath and airborne acetone detection. Physicochemical attribute analysis reveals the formation of crystalline CuMoO₄ nanorods with diameters ranging from 90 to 150 nm, and an optical band gap of approximately 3.87 eV. CuMoO₄ nanorods-based chemiresistor demonstrates excellent acetone monitoring performance, with a sensitivity of approximately 33.85 at a concentration of 125 ppm. Acetone detection is rapid, with a response time of 23 s and fast recovery within 31 s. Furthermore, the chemiresistor exhibits long-term stability and selectivity towards acetone, compared to other interfering volatile organic compounds (VOCs) commonly found in human breath such as ethanol, propanol, formaldehyde, humidity, and ammonia. The linear detection range of acetone from 25 to 125 ppm achieved by the fabricated sensor is well-suited for human breath-based diagnosis of diabetes. This work represents a significant advancement in the field, as it offers a promising alternative to time-consuming and costly invasive biomedical diagnostics, with the potential for application in cleanroom facilities for indoor contamination monitoring. The utilization of CuMoO₄ nanorods as sensing nanoplatform opens new possibilities for the development of nano-enabled, low-trace acetone monitoring technologies for non-invasive diabetes diagnosis and environmental sensing applications.

Equivalent Circuit Model Extraction for a SAW Resonator: Below and above Room Temperature

In this work, a SAW resonator is characterized in terms of admittance (Y-) parameters in the temperature range spanning from 0 °C to 100 °C, with the aim of highlighting how its physical properties are affected by the temperature change. A lumped-element equivalent-circuit model is used to represent the device under test at the considered temperature conditions and a parameters extraction process based on a Lorentzian fitting is developed for the determination of the equivalent-circuit elements in the investigated temperature range. A very good agreement is observed between the performed measurements and the model simulations. The characterization process and the subsequent equivalent-circuit parameters extraction at different temperature values are described and discussed.

Theoretical analysis of the absorption of CO2 and CO on pristine and Al-doped C3B

Real-time detection of CO2 and CO is of great importance because CO2 is a major cause of global warming and CO endangers the human nervous and cardiovascular systems.

VOCs Sensing by Metal Oxides, Conductive Polymers, and Carbon-Based Materials

This review summarizes the recent research efforts and developments in nanomaterials for sensing volatile organic compounds (VOCs). The discussion focuses on key materials such as metal oxides (e.g., ZnO, SnO2, TiO2 WO3), conductive polymers (e.g., polypyrrole, polythiophene, poly(3,4-ethylenedioxythiophene)), and carbon-based materials (e.g., graphene, graphene oxide, carbon nanotubes), and their mutual combination due to their representativeness in VOCs sensing. Moreover, it delves into the main characteristics and tuning of these materials to achieve enhanced functionality (sensitivity, selectivity, speed of response, and stability). The usual synthesis methods and their advantages towards their integration with microsystems for practical applications are also remarked on. The literature survey shows the most successful systems include structured morphologies, particularly hierarchical structures at the nanometric scale, with intentionally introduced tunable "decorative impurities" or well-defined interfaces forming bilayer structures. These groups of modified or functionalized structures, in which metal oxides are still the main protagonists either as host or guest elements, have proved improvements in VOCs sensing. The work also identifies the need to explore new hybrid material combinations, as well as the convenience of incorporating other transducing principles further than resistive that allow the exploitation of mixed output concepts (e.g., electric, optic, mechanic).

Novel quaternary oxide semiconductor for the application of gas sensors with long-term stability

In this paper, quaternary oxide semiconductor was applied as sensing material for the fabrication of gas sensors. One-step solvothermal method was utilized to synthesize the sensing material. Various characterization methods including XRD, XPS, SEM, HRTEM were employed to analyze the composition and structure of the sensing material. Composite composed of CuInW₂O₈ and CuWO₄ was successfully prepared at last characterized by XRD result. The SEM result revealed the structure of the sensing material: nanoparticles assembled spindle-like nanostructure with ~200 nm long axis and ~60 nm short axis. Sensor based on the spindle-like nanostructures was systemically tested to acquire the information about the sensing properties. The sensor exhibited responses to acetone at the operating temperatures from 190 to 275 °C. The results showed that the sensor was more sensitive to acetone compared with other gases at the optimal operating temperature of 210 °C. The response of the sensor was also tested under the relative humidity from 25 RH% to 95 RH% at the operating temperature of 210 °C. The response variation was only 13.9%, demonstrating that the sensor possessed strong anti-humidity ability. It was worth noting that the sensor showed acceptable long-term stability compared with other acetone sensors. The gas sensing mechanism was also discussed here. This work might provide ideas for the development of novel sensitive materials for the application of gas sensors.

Nanostructured Metal Oxide-Based Acetone Gas Sensors: A Review

Acetone is a well-known volatile organic compound that is widely used in different industrial and domestic areas. However, it can have dangerous effects on human life and health. Thus, the realization of sensitive and selective sensors for recognition of acetone is highly important. Among different gas sensors, resistive gas sensors based on nanostructured metal oxide with high surface area, have been widely reported for successful detection of acetone gas, owing to their high sensitivity, fast dynamics, high stability, and low price. Herein, we discuss different aspects of metal oxide-based acetone gas sensors in pristine, composite, doped, and noble metal functionalized forms. Gas sensing mechanisms are also discussed. This review is an informative document for those who are working in the field of gas sensors.