Feasibility and Accuracy of Thoracolumbar Pedicle Screw Placement Using an Augmented Reality Head Mounted Device

Comparing Different Registration and Visualization Methods for Navigated Common Femoral Arterial Access-A Phantom Model Study Using Mixed Reality

Mixed reality (MxR) enables the projection of virtual three-dimensional objects into the user's field of view via a head-mounted display (HMD). This phantom model study investigated three different workflows for navigated common femoral arterial (CFA) access and compared it to a conventional sonography-guided technique as a control. A total of 160 punctures were performed by 10 operators (5 experts and 5 non-experts). A successful CFA puncture was defined as puncture at the mid-level of the femoral head with the needle tip at the central lumen line in a 0° coronary insertion angle and a 45° sagittal insertion angle. Positional errors were quantified using cone-beam computed tomography following each attempt. Mixed effect modeling revealed that the distance from the needle entry site to the mid-level of the femoral head is significantly shorter for navigated techniques than for the control group. This highlights that three-dimensional visualization could increase the safety of CFA access. However, the navigated workflows are infrastructurally complex with limited usability and are associated with relevant cost. While navigated techniques appear as a potentially beneficial adjunct for safe CFA access, future developments should aim to reduce workflow complexity, avoid optical tracking systems, and offer more pragmatic methods of registration and instrument tracking.

Accuracy of augmented reality-assisted pedicle screw placement: a systematic review

OBJECTIVE

Conventional freehand methods of pedicle screw placement are associated with significant complications due to close proximity to neural and vascular structures. Recent advances in augmented reality surgical navigation (ARSN) have led to its adoption into spine surgery. However, little is known regarding its overall accuracy. The purpose of this study is to delineate the overall accuracy of ARSN pedicle screw placement across various models.

METHODS

A systematic review was conducted of Medline/PubMed, Cochrane and Embase Library databases according to the PRISMA guidelines. Relevant data extracted included reports of pedicle screw placement accuracy and breaches, as defined by the Gertzbein-Robbins classification, in addition to deviation from pre-planned trajectory and entry point. Accuracy was defined as the summation of grade 0 and grade 1 events per the Gertzbein-Robbins classification.

RESULTS

Twenty studies reported clinically accurate placed screws. The range of clinically accurate placed screws was 26.3-100%, with 2095 screws (93.1%) being deemed clinically accurate. Furthermore, 5.4% (112/2088) of screws were reported as grade two breaches, 1.6% (33/2088) grade 3 breaches, 3.1% (29/926) medial breaches and 2.3% (21/926) lateral breaches. Mean linear deviation ranged from 1.3 to 5.99 mm, while mean angular/trajectory deviation ranged 1.6°-5.88°.

CONCLUSION

The results of this study highlight the overall accuracy of ARSN pedicle screw placement. However, further robust prospective studies are needed to accurately compare to conventional methods of pedicle screw placement.

Machine Learning in Spine Surgery: A Narrative Review

Artificial intelligence and machine learning (ML) can offer revolutionary advances in their application to the field of spine surgery. Within the past 5 years, novel applications of ML have assisted in surgical decision-making, intraoperative imaging and navigation, and optimization of clinical outcomes. ML has the capacity to address many different clinical needs and improve diagnostic and surgical techniques. This review will discuss current applications of ML in the context of spine surgery by breaking down its implementation preoperatively, intraoperatively, and postoperatively. Ethical considerations to ML and challenges in ML implementation must be addressed to maximally benefit patients, spine surgeons, and the healthcare system. Areas for future research in augmented reality and mixed reality, along with limitations in generalizability and bias, will also be highlighted.

Augmented reality in spine surgery - past, present, and future

BACKGROUND CONTEXT

Augmented reality (AR) is increasingly recognized as a valuable tool in spine surgery. Here we provides an overview of the key developments and technological milestones that have laid the foundation for AR applications in this field. We also assess the quality of existing studies on AR systems in spine surgery and explore potential future applications.

PURPOSE

The purpose of this narrative review is to examine the role of AR in spine surgery. It aims to highlight the evolution of AR technology in this context, evaluate the existing body of research, and outline potential future directions for integrating AR into spine surgery.

STUDY DESIGN

Narrative review.

METHODS

We conducted a thorough literature search to identify studies and developments related to AR in spine surgery. Relevant articles, reports, and technological advancements were analyzed to establish the historical context and current state of AR in this field.

RESULTS

The review identifies significant milestones in the development of AR technology for spine surgery. It discusses the growing body of research and highlights the strengths and weaknesses of existing investigations. Additionally, it presents insights into the potential for AR to enhance spine surgical education and speculates on future applications.

CONCLUSIONS

Augmented reality has emerged as a promising adjunct in spine surgery, with notable advancements and research efforts. The integration of AR into the spine surgery operating room holds promise, as does its potential to revolutionize surgical education. Future applications of AR in spine surgery may include real-time navigation, enhanced visualization, and improved patient outcomes. Continued development and evaluation of AR technology are essential for its successful implementation in this specialized surgical field.

Recent Updates on Minimally Invasive Spine Surgery: Techniques, Technologies, and Indications

A number of minimally invasive spine surgeries (MISSs) have been developed to address the drawbacks of open spine surgery. Their advantages include small skin incisions, reduction in tissue damage, quick recovery, and short hospital stay. However, the clinical outcomes are comparable to open surgery. There was a cap on the number of indications that could be set for all spinal illnesses. The indications for MISSs have been expanding owing to mechanical and technological advances in medical equipment. Thus, this review presents the various MISSs developed to date, surgical indications, surgical techniques, and their advantages and disadvantages.

Extended Reality in Neurosurgical Education: A Systematic Review

Surgical simulation practices have witnessed a rapid expansion as an invaluable approach to resident training in recent years. One emerging way of implementing simulation is the adoption of extended reality (XR) technologies, which enable trainees to hone their skills by allowing interaction with virtual 3D objects placed in either real-world imagery or virtual environments. The goal of the present systematic review is to survey and broach the topic of XR in neurosurgery, with a focus on education. Five databases were investigated, leading to the inclusion of 31 studies after a thorough reviewing process. Focusing on user performance (UP) and user experience (UX), the body of evidence provided by these 31 studies showed that this technology has, in fact, the potential of enhancing neurosurgical education through the use of a wide array of both objective and subjective metrics. Recent research on the topic has so far produced solid results, particularly showing improvements in young residents, compared to other groups and over time. In conclusion, this review not only aids to a better understanding of the use of XR in neurosurgical education, but also highlights the areas where further research is entailed while also providing valuable insight into future applications.

Augmenting Performance: A Systematic Review of Optical See-Through Head-Mounted Displays in Surgery

We conducted a systematic review of recent literature to understand the current challenges in the use of optical see-through head-mounted displays (OST-HMDs) for augmented reality (AR) assisted surgery. Using Google Scholar, 57 relevant articles from 1 January 2021 through 18 March 2022 were identified. Selected articles were then categorized based on a taxonomy that described the required components of an effective AR-based navigation system: data, processing, overlay, view, and validation. Our findings indicated a focus on orthopedic (n=20) and maxillofacial surgeries (n=8). For preoperative input data, computed tomography (CT) (n=34), and surface rendered models (n=39) were most commonly used to represent image information. Virtual content was commonly directly superimposed with the target site (n=47); this was achieved by surface tracking of fiducials (n=30), external tracking (n=16), or manual placement (n=11). Microsoft HoloLens devices (n=24 in 2021, n=7 in 2022) were the most frequently used OST-HMDs; gestures and/or voice (n=32) served as the preferred interaction paradigm. Though promising system accuracy in the order of 2–5 mm has been demonstrated in phantom models, several human factors and technical challenges—perception, ease of use, context, interaction, and occlusion—remain to be addressed prior to widespread adoption of OST-HMD led surgical navigation.

Comparison of three imaging and navigation systems regarding accuracy of pedicle screw placement in a sawbone model

3D-navigated pedicle screw placement is increasingly performed as the accuracy has been shown to be considerably higher compared to fluoroscopy-guidance. While different imaging and navigation devices can be used, there are few studies comparing these under similar conditions. Thus, the objective of this study was to compare the accuracy of two combinations most used in the literature for spinal navigation and a recently approved combination of imaging device and navigation system. With each combination of imaging system and navigation interface, 160 navigated screws were placed percutaneously in spine levels T11-S1 in ten artificial spine models. 470 screws were included in the final evaluation. Two blinded observers classified screw placement according to the Gertzbein Robbins grading system. Grades A and B were considered acceptable and Grades C-E unacceptable. Weighted kappa was used to calculate reliability between the observers. Mean accuracy was 94.9% (149/157) for iCT/Curve, 97.5% (154/158) for C-arm CBCT/Pulse and 89.0% for CBCT/StealthStation (138/155). The differences between the different combinations were not statistically significant except for the comparison of C-arm CBCT/Pulse and CBCT/StealthStation (p = 0.003). Relevant perforations of the medial pedicle wall were only seen in the CBCT group. Weighted interrater reliability was found to be 0.896 for iCT, 0.424 for C-arm CBCT and 0.709 for CBCT. Under quasi-identical conditions, higher screw accuracy was achieved with the combinations iCT/Curve and C-arm CBCT/Pulse compared with CBCT/StealthStation. However, the exact reasons for the difference in accuracy remain unclear. Weighted interrater reliability for Gertzbein Robbins grading was moderate for C-arm CBCT, substantial for CBCT and almost perfect for iCT.

Mixed-Reality-Assisted Puncture of the Common Femoral Artery in a Phantom Model

Percutaneous femoral arterial access is daily practice in a variety of medical specialties and enables physicians worldwide to perform endovascular interventions. The reported incidence of percutaneous femoral arterial access complications is 3–18% and often results from suboptimal puncture location due to insufficient visualization of the target vessel. The purpose of this proof-of-concept study was to evaluate the feasibility and the positional error of a mixed-reality (MR)-assisted puncture of the common femoral artery in a phantom model using a commercially available navigation system. In total, 15 MR-assisted punctures were performed. Cone-beam computed tomography angiography (CTA) was used following each puncture to allow quantification of positional error of needle placements in the axial and sagittal planes. Technical success was achieved in 14/15 cases (93.3%) with a median axial positional error of 1.0 mm (IQR 1.3) and a median sagittal positional error of 1.1 mm (IQR 1.6). The median duration of the registration process and needle insertion was 2 min (IQR 1.0). MR-assisted puncture of the common femoral artery is feasible with acceptable positional errors in a phantom model. Future studies should aim to measure and reduce the positional error resulting from MR registration.