Electrochemical Sensors for Detection of Acetylsalicylic Acid

Exploring the potential of 3D-printed solvent activated electrodes for salicylic acid analysis

This study evaluates the electrochemical properties of tetrahydrofuran (THF)-activated 3D-printed polylactic acid-carbon black (PLA-CB) electrodes. The electrodes were characterized using SEM, ATR-FTIR, contact angle measurements, and optical profilometry to assess the effects of THF activation on their surface and chemical properties. A range of redox probes were used to investigate both, outer- and inner-sphere electron transfer processes, providing a comprehensive understanding of the electrode's electrochemical behavior. The activated electrodes were further tested for their ability to determine salicylic acid (SA) using differential pulse voltammetry (DPV). Calibration curves were constructed, and preliminary analyses of SA in cosmetic products, including a face serum and a cream, were performed. Obtained data are critically assessed.

Sustainable Agriculture with LEAFS: a Low-cost Electrochemical Analyzer of Foliage Stress

Sustainable agricultural practices are vital to meet the needs of a rapidly growing global demand for food. Monitoring plant health is crucial for enhancing crop yields. Salicylic acid (SA) is a plant hormone that plays a key role in the defense mechanisms plants employ against various stress factors. Changes in SA levels serve as an indicator that a plant is experiencing stress. Here, we present a low-cost electrochemical sensor fabricated using porous laser-induced graphene material for the measurement of plant stress. It employs square wave voltammetry to monitor SA levels using a wireless potentiostat. The sensor shows a high sensitivity of 144.28 μA/mM to SA, with a linear detection range of 6.6 μM to 200 μM and a limit of detection of 1.44 μM. The surface of the working electrode was modified with Nafion to enable continuous in-situ stress monitoring. The sensor's practicality has been demonstrated through real-time stress monitoring in aloe vera and philodendron hederaceum plant species.

Oxidation of Mesalamine under Phenoloxidase- or Peroxidase-like Enzyme Catalysis

Mesalamine, also called 5-ASA (5-aminosalicylic acid), is a largely used anti-inflammatory agent and is a main choice to treat Ulcerative Colitis. This report is aimed to investigate enzymatic processes involved in the oxidation of mesalamine to better understand some of its side-effects. Oxidation with oxygen (catalyzed by ceruloplasmin) or with hydrogen peroxide (catalyzed by peroxidase or hemoglobin) showed that these oxidases, despite their different mechanisms of oxidation, could recognize mesalamine as a substrate and trigger its oxidation to a corresponding quinone-imine. These enzymes were chosen because they may recognize hydroquinone (a p-diphenol) as substrate and oxidize it to p-benzoquinone and that mesalamine, as a p-aminophenol, presents some similarities with hydroquinone. The UV-Vis kinetics, FTIR and 1H NMR supported the hypothesis of oxidizing mesalamine. Furthermore, mass spectrometry suggested the quinone-imine as reaction product. Without enzymes, the oxidation process was very slow (days and weeks), but it was markedly accelerated with the oxidases, particularly with peroxidase. Cyclic voltammetry supported the hypothesis of the oxidative process and allowed a ranking of susceptibility to oxidizing mesalamine in comparison with other oxidizable drug molecules with related structures. The susceptibility to oxidation was higher for mesalamine, in comparison with Tylenol (acetaminophen) and with aspirin (salicylic acid).

Acid-Base Chemistry Provides a Simple and Cost-Effective Route to New Redox-Active Ionic Liquids

Redox-active ionic liquids (RAILs) hold great promise as high density electrochemical energy storage materials, but are hampered by high costs and low bulk conductivities. In this work, we introduce and electrochemically characterise novel redox-active protic ionic liquids (RAPILs) formed by acid-base neutralisation from cheap and plentiful starting materials. We also demonstrate a novel RAIL-in-IL solvent system for electrochemical characterisation of RAPILs, which enables efficient and cost-effective determination of redox potentials and screening for electrochemical reversibility. Of the redox-active ionic liquids tested in this work, only propylammonium 4-nitrophenylacetate demonstrates completely reversible electrochemistry and preservation of ionic character upon redox cycling under acidic or neutral conditions. Propylammonium 2,5-dihydroxyphenyl-carboxylate also demonstrates two reversible redox processes, but is unstable to oxidation at 0.27 V vs Ag (-0.14 V vs Fc), most likely forming an uncharged benzoquinone species. Using the lessons learned from this prototypical set of RAPILs, we propose design criteria to guide future experimental and computational work.

Biochemical and pathophysiological improvements in rats with thioacetamide induced-hepatocellular carcinoma using aspirin plus vitamin C

BACKGROUND

Hepatocellular carcinoma (HCC) is one of the leading causes of cancer-related death, so we should be concerned and look for effective/less-harmful treatments than chemotherapeutics already clinically in application. Aspirin works well ''in conjunction'' with other therapies for HCC since aspirin can boost the sensitivity of anti-cancer activity. Vitamin C also was shown to have antitumor effects. In this study, we examined the anti-HCC activities of synergistic combination (aspirin and vitamin C) vs. doxorubicin on HCC-bearing rats and hepatocellular carcinoma (HepG-2) cells.

METHODS

In vitro, we evaluated IC₅₀ and selectivity index (SI) using HepG-2 and human lung fibroblast (WI-38) cell lines. In vivo, four rat groups were used: Normal, HCC (intraperitoneally (i.p.) administered 200 mg thioacetamide/kg/twice a week), HCC + DOXO (HCC-bearing rats i.p. administered 0.72 mg doxorubicin (DOXO)/rat/once a week), and HCC + Aspirin + Vit. C (i.p. administered vitamin C (Vit. C) 4 g/kg/day after day concomitant with aspirin 60 mg/kg/orally day after day). We evaluated biochemical factors [aminotransferases (ALT and AST), albumin, and bilirubin (TBIL) spectrophotometrically, caspase 8 (CASP8), p53, Bcl2 associated X protein (BAX), caspase 3 (CASP3), alpha-fetoprotein (AFP), cancer antigen 19.9 (CA19.9), tumor necrosis factor-alpha (TNF-α), and interleukin-6 (IL-6) using ELISA], and liver histopathologically.

RESULTS

HCC induction was accompanied by significant time-dependent elevations in all measured biochemical parameters except the p53 level significantly declined. Liver tissue architecture organization appeared disturbed with cellular infiltration, trabeculae, fibrosis, and neovascularization. Following drug medication, all biochemical levels significantly reversed toward normal, with fewer signs of carcinogenicity in liver tissues. Compared to doxorubicin, aspirin & vitamin C therapy ameliorations were more appreciated. In vitro, combination therapy (aspirin & vitamin C) exhibited potent cytotoxicity (HepG-2 IC₅₀ of 17.41 ± 1.4 µg/mL) and more excellent safety with a SI of 3.663.

CONCLUSIONS

Based on our results, aspirin plus vitamin C can be considered reliable, accessible, and efficient synergistic anti-HCC medication.

Synthesis of New Ester Derivatives of Salicylic Acid and Evaluation of Their COX Inhibitory Potential

Salicylic acid is an NSAID with serious side effects on the GIS. The side effects of salicylic acid on the GIS are slightly reduced by acetylating salicylic acid. 12 new ester analogs of salicylic acid were synthesized with high yields in this study. The chemical structures of the synthesized compounds were characterized by ¹ H-NMR, ¹³ C-NMR, and HRMS spectra. The inhibitory potential of the compounds was evaluated on COXs by in vitro and in silico studies. The COX2 inhibitory activity of the most potent inhibitor MEST1 (IC₅₀ : 0.048 μM) was found to be much higher than the COX2 inhibitory activity of aspirin (IC₅₀ : 2.60 μM). In docking studies, the strongest inhibitor among the compounds synthesized was predicted to be MEST1, with the lowest binding energy. Docking studies revealed that MEST1 extends from the hydrophobic channel to the top of the cyclooxygenase active site, forming various interactions with residues in the binding pocket.

Determination of Salicylic Acid Using a Highly Sensitive and New Electroanalytical Sensor

Background:

A drug sensor (salicylic acid, in this case) was designed and made up of this research. The senor was made by modification of paste electrode (MPE) with CuO-SWCNTs and 1-hexyl-3-methylimidazolium chloride (HMICl). The MPE/CuO-SWCNTs/HMICl showed catalytic activity for the oxidation signal of salicylic acid in phosphate buffer solution.

Methods:

Electrochemical methods were used as a powerful strategy for the determination of salicylic acid in pharmaceutical samples. Aiming at this goal, carbon paste electrode was amplified with conductive materials and used as a working electrode.

Results:

The MPE/CuO-SWCNTs/HMICl was used for the determination of salicylic acid in the concentration range of 1.0 nM – 230 µM using differential pulse voltammetric (DPV) method. At pH=7.0, as optimum condition, the MPE/CuOSWCNTs/HMICl displayed a high-quality ability for the determination of salicylic acid in urine, pharmaceutical serum, and water samples.

Conclusion:

The MPE/CuO-SWCNTs/HMICl was successfully used as a new and high performance working electrode for the determination of salicylic acid at a nanomolar level and in real samples.

A flexible rGO electrode: a new platform for the direct voltammetric detection of salicylic acid

Flexible sensors are of considerable interest for the development of wearable smart miniature devices. This work reported a flexible electrochemical platform based on reduced graphene oxide (rGO) for the detection of salicylic acid (SA). The free-standing and flexible rGO electrode was prepared via a simple extruded process. Dynamic mechanical deformation and bending studies illustrated the resilience and compliance of the flexible electrode against extreme mechanical deformations. Quantitative analysis of SA was performed by using differential pulse voltammetry (DPV) with this flexible rGO electrode. Linearity ranges for SA were obtained from 1.0 × 10^-10 M to 1.0 × 10^-5 M with the detection limit of 2.3 × 10^-11 M (S/N = 3). This strategy provided a new insight into the design and application of flexible electrodes. It will extend the applications of rGO in sensing, bio-electronics and lab-on-chip devices.

An electrochemical sensor based on chitosan capped with gold nanoparticles combined with a voltammetric electronic tongue for quantitative aspirin detection in human physiological fluids and tablets

Inflammatory diseases increase has recently sparked the research interest for drugs diagnostic tools development. At therapeutic doses, acetylsalicylic acid (ASA or aspirin) is widely used for these diseases' treatment. ASA overdoses can however give rise to adverse side effects including ulcers, gastric damage. Hence, development of simple, portable and sensitive methods for ASA detection is desirable. This paper reports aspirin analysis in urine, saliva and pharmaceutical tablet using an electrochemical sensor and a voltammetric electronic tongue (VE-Tongue). The electrochemical sensor was fabricated by self-assembling chitosan capped with gold nanoparticles (Cs + AuNPs) on a screen-printed carbon electrode (SPCE). It exhibits a logarithmic-linear relationship between its response and the ASA concentration in the range between 1 pg/mL and 1 μg/mL. A low detection limit (0.03 pg/mL), good selectivity against phenol and benzoic acid interference, and successful practical application were demonstrated. Qualitative analysis was performed using the VE-Tongue based unmodified metal electrodes combined with two chemometric approaches to classify urine samples spiked with different aspirin concentrations. Partial least squares (PLS) method provided prediction models obtained from the data of both devices with a regression correlation coefficient R² = 0.99. Correspondingly, the SPCE/(Cs + AuNPs) electrochemical sensor and VE-Tongue could be viable tools for biological analysis of drugs.

Electrochemical strategies for gallic acid detection: Potential for application in clinical, food or environmental analyses

Polyphenols are important to human health thus making it interesting and necessary to identify and assess methods for their detection. Gallic acid (GA) is a well-known antioxidant compound, found in tea leaves, various fruits, fruit seeds and in fruit-derived foods and beverages. In this study, to electrochemically detect this compound and assess the potential for GA detection, different analytical conditions at pH values of 5.8, 7 and 8 were tried. Two types of device were used for GA detection: (1) Lazar ORP-146C reduction-oxidation microsensors, coupled with a Jenco device, for estimation of antioxidant capacities of different electroactive media, and (2) screen-printed carbon sensors coupled with a mobile PalmSens device using differential pulse voltammetry (qualitative and quantitative GA determination). These proposed methods were validated by analysing some real samples: wine, green tea, apple juice and serum fortified with GA. Detection was evaluated in terms of specific calibration curves, with low limit of detection (LOD) and limit of quantification (LOQ), low response time, and high sensitivities. The analytical characteristics obtained recommend these methods to be tested on more other types of real samples. Our proposed methods, used in the established conditions of pH, may have further application in other clinical, food or environmental samples analyses in which the results of total antioxidants contents are usually expressed in GA equivalents.

Evaluation of Flavonoid Derivative and Doxorubicin Effects in Lung Cancer Cells (A549) Using Differential Pulse Voltammetry Method

Purpose: Electrochemical measurements have prompted the progress as a consequence of their affectability, cost-affectivity and comparatively short examination time. The aim of this study was the fast evaluation of the effect of chemotherapy compounds on the viability of lung cancer cells (A549) via electrochemical methods. Methods: Cyclic voltammetry (CV) was used as a primary method to distinguish between electrochemical behavior of normal and lung cancer cells. Differential pulse voltammetry (DPV) was employed as a complementary analyses method for the impact of doxorubicin (DOX) and Flavonoid modified drug (FMD) (US patent Application number: 62548886) on Lung cancer cells. Results: Only one oxidative peak, at approximately -0.15 V was detected through DPV method in cancer cell line. While a significant distinguish was not seen in CV. The current intensity (I) was decreased in cancer cells with increasing the DOX and FMD levels (t=99.027, α=0.05, P=0.0000), (t=135.513, α=0.05, P=0.0000), respectively. Conclusion: The movement of cancerous cells towards death through chemotherapy drugs such as DOX and FMD can make distinct and significant changes in the electrochemical behaviors of those cells.

Pencil Graphite Electrodes: A Versatile Tool in Electroanalysis

Due to their electrochemical and economical characteristics, pencil graphite electrodes (PGEs) gained in recent years a large applicability to the analysis of various types of inorganic and organic compounds from very different matrices. The electrode material of this type of working electrodes is constituted by the well-known and easy commercially available graphite pencil leads. Thus, PGEs are cheap and user-friendly and can be employed as disposable electrodes avoiding the time-consuming step of solid electrodes surface cleaning between measurements. When compared to other working electrodes PGEs present lower background currents, higher sensitivity, good reproducibility, and an adjustable electroactive surface area, permitting the analysis of low concentrations and small sample volumes without any deposition/preconcentration step. Therefore, this paper presents a detailed overview of the PGEs characteristics, designs and applications of bare, and electrochemically pretreated and chemically modified PGEs along with the corresponding performance characteristics like linear range and detection limit. Techniques used for bare or modified PGEs surface characterization are also reviewed.

Disposable terbium (III) salicylate complex imprinted membrane using solid phase surface fluorescence method for fast separation and detection of salicylic acid in pharmaceuticals and human urine

In this work, a simple, low cost, selective and sensitive complex imprinted membrane (CIM) for solid-phase fluorescent detection was developed with terbium (III) salicylate as complex template. Terbium-sensitized luminescence was employed for monitoring salicylic acid (SA) based on the fluorescence enhancement effect of benzoic acid derivatives on lanthanide ion Tb (III). The resulting CIM showed good fluorescent response and high selectivity towards SA with Tb as pivot in protic solvents, while demonstrating better analytical performance than the controlled membranes. The optimized adsorption time was 10 min, indicating rapid kinetics of the imprinted membrane. The linear response of CIM to SA was from 0.20 to 10mg/L with limit of detection (LOD) of 0.040 mg/L. The prepared CIM was successfully applied to the analysis of salicylic acid in pharmaceuticals and spiked human urine with recoveries of 80.6%-88.1%. The analytical results of the proposed method were in good agreement with those obtained by high performance liquid chromatography (HPLC) method, indicating that the developed membrane has acceptable practicability for fast determination of SA in real samples.

Stripping Voltammetric Determination of Analgesics in Their Pharmaceuticals Using Nano-Riboflavin-Modified Glassy Carbon Electrode

Cyclic voltammetric behaviors of three analgesics, acetaminophen (AAP), acetylsalicylic acid (ASA), and dipyrone (DP), were studied using nano-riboflavin-modified glassy carbon electrode. One well-defined oxidation peak each for AAP and ASA and three oxidation peaks for DP were observed. The influence of pH, scan rate, and concentration reveals irreversible diffusion controlled reaction. The SEM analysis confirmed good accumulation of the drugs on the electrode surface. Calibration was made under the maximum peak current conditions. The concentration range studied for the determination of drugs was 0.02 to 0.4 μg mL−1for AAP and ASA and 0.025 to 0.4 μg mL−1for DP. The lower limit of detection observed for AAP, ASA, and DP was 0.016, 0.007 μg mL−1, and 0.013 μg mL−1, respectively. The suitability of the method for the determination of these analgesics in pharmaceutical preparations and urine samples was also ascertained.

Anodic Determination of Acetylsalicylic Acid at a Mildly Oxidized Boron-Doped Diamond Electrode in Sodium Sulphate Medium

Differential pulse voltammetry (DPV) and chronoamperometry (CA) were used to detect and determine acetylsalicylic acid (ASA) at a mildly oxidized boron-doped diamond (BDD) electrode in a neutral sodium sulphate solution as supporting electrolyte. ASA determination in unbuffered medium was achieved using neutralized standard and real samples. Over the concentration range of 0.01 mM–0.1 mM, linear calibration plots of anodic current peaks in DPV and anodic currents in CA experiments versus concentration were obtained with very high correlation coefficients and good sensitivity values. The limits of detection were situated around 1 μM. The association of DPV and CA techniques with standard addition method represented a suitable option for the determination of ASA in real samples such as pharmaceutical formulations.

Electrochemical microsensors for the detection of cadmium(II) and lead(II) ions in plants

Routine determination of trace metals in complex media is still a difficult task for many analytical instruments. The aim of this work was to compare three electro-chemical instruments [a standard potentiostat (Autolab), a commercially available miniaturized potentiostat (PalmSens) and a homemade micropotentiostat] for easy-to-use and sensitive determination of cadmium(II) and lead(II) ions. The lowest detection limits (hundreds of pM) for both metals was achieved by using of the standard potentiostat, followed by the miniaturized potentiostat (tens of nM) and the homemade instrument (hundreds of nM). Nevertheless, all potentiostats were sensitive enough to evaluate contamination of the environment, because the environmental limits for both metals are higher than detection limits of the instruments. Further, we tested all used potentiostats and working electrodes on analysis of environmental samples (rainwater, flour and plant extract) with artificially added cadmium(II) and lead(II). Based on the similar results obtained for all potentiostats we choose a homemade instrument with a carbon tip working electrode for our subsequent environmental experiments, in which we analyzed maize and sunflower seedlings and rainwater obtained from various sites in the Czech Republic.

Electrocatalytic activity of salicylic acid on the platinum nanoparticles modified electrode by electrochemical deposition

Platinum nanoparticles (PNP) were deposited on the Pt disk electrode by electrochemical deposition, it was found that salicylic acid (SA) had good electrocatalytic oxidation response at the prepared Pt nanoparticles modified Pt disk electrode (PNP/Pt). Then the modified electrode was used to detect SA in weak alkali condition, it was found that the response current was 9.2 times that of bare Pt disk electrode, and the linear range of detection was 2.0x10(-5) to 5.0x10(-4)M. After that, the electrode was adopted to detect the SA in Zuguangsan, one kind of Chinese medicine, the results showed that the PNP/Pt electrode has low detection limit, high repeatability and stability as SA sensor, could be applied in the detection of SA reliably.

Silver(I) ions ultrasensitive detection at carbon electrodes-analysis of waters, tobacco cells and fish tissues

We used carbon paste electrodes and a standard potentiostat to detect silver ions. The detection limit (3 Signal/Noise ratio) was estimated as 0.5 μM. A standard electrochemical instrument microanalysis of silver(I) ions was suggested. As a working electrode a carbon tip (1 mL) or carbon pencil was used. Limits of detection estimated by dilution of a standard were 1 (carbon tip) or 10 nM (carbon pencil). Further we employed flow injection analysis coupled with carbon tip to detect silver(I) ions released in various beverages and mineral waters. During first, second and third week the amount of silver(I) ions releasing into water samples was under the detection limit of the technique used for their quantification. At the end of a thirteen weeks long experiment the content of silver(I) ions was several times higher compared to the beginning of release detected in the third week and was on the order of tens of nanomoles. In subsequent experiments the influence of silver(I) ions (0, 5 and 10 μM) on a plant model system (tobacco BY-2 cells) during a four-day exposition was investigated. Silver(I) ions were highly toxic to the cells, which was revealed by a double staining viability assay. Moreover we investigated the effect of silver(I) ions (0, 0.3, 0.6, 1.2 and 2.5 μM) on guppies (Poecilia reticulata). Content of Ag(I) increased with increasing time of the treatment and applied concentrations in fish tissues. It can be concluded that a carbon tip or carbon pencil coupled with a miniaturized potentiostat can be used for detection of silver(I) ions in environmental samples and thus represents a small, portable, low cost and easy-to-use instrument for such purposes.

Determination of Vitamin C (Ascorbic Acid) Using High Performance Liquid Chromatography Coupled with Electrochemical Detection

Vitamin C (ascorbic acid, ascorbate, AA) is a water soluble organic compound that participates in many biological processes. The main aim of this paper was to utilize two electrochemical detectors (amperometric - Coulouchem III and coulometric - CoulArray) coupled with flow injection analysis for the detection of ascorbic acid. Primarily, we optimized the experimental conditions. The optimized conditions were as follows: detector potential 100 mV, temperature 25 °C, mobile phase 0.09% TFA:ACN, 3:97 (v/v) and flow rate 0.13 mL·min-1. The tangents of the calibration curves were 0.3788 for the coulometric method and 0.0136 for the amperometric one. The tangent of the calibration curve measured by the coulometric detector was almost 30 times higher than the tangent measured by the amperometric detector. Consequently, we coupled a CoulArray electrochemical detector with high performance liquid chromatography and estimated the detection limit for AA as 90 nM (450 fmol per 5 μL injection). The method was used for the determination of vitamin C in a pharmaceutical preparations (98 ± 2 mg per tablet), in oranges (Citrus aurantium) (varied from 30 to 56 mg/100 g fresh weight), in apples (Malus sp.) (varied from 11 to 19 mg/100 g fresh weight), and in human blood serum (varied from 38 to 78 μM). The recoveries were also determined.

Amperometric Sensor for Detection of Chloride Ions

Chloride ion sensing is important in many fields such as clinical diagnosis, environmental monitoring and industrial applications. We have measured chloride ions at a carbon paste electrode (CPE) and at a CPE modified with solid AgNO₃, a solution of AgNO₃ and/or solid silver particles. Detection limits (3 S/N) for chloride ions were 100 μM, 100 μM and 10 μM for solid AgNO₃, solution of AgNO₃ and/or solid silver particles, respectively. The CPE modified with silver particles is the most sensitive to the presence chloride ions. After that we approached to the miniaturization of the whole electrochemical instrument. Measurements were carried out on miniaturized instrument consisting of a potentiostat with dimensions 35 × 166 × 125 mm, screen printed electrodes, a peristaltic pump and a PC with control software. Under the most suitable experimental conditions (Britton-Robinson buffer, pH 1.8 and working electrode potential 550 mV) we estimated the limit of detection (3 S/N) as 500 nM.

An Electrochemical Detection of Metallothioneins at the Zeptomole Level in Nanolitre Volumes

An Electrochemical Detection of Metallothioneins at the Zeptomole Level in Nanolitre VolumesWe report on improvement of the adsorptive transfer stripping technique (AdTS) coupled with the differential pulse voltammetry Brdicka reaction to determine a thiol-protein. The current technique has been unable to generate reproducible results when analyzing very low sample volumes (nanolitres). This obstacle can be overcome technically by modifying the current transfer technique including cooling step of the adsorbed analyte. We tested the technique on determination of a promising tumour disease marker protein called metallothionein (MT). The detection limit (3 S/N) of MT was evaluated as 500 zeptomoles per 500 nL (1 pM) and the quantification limit (10 S/N) as 1,500 zeptomoles per 500 nL (3 pM). Further, the improved AdTS technique was utilized to analyze blood serum samples from patients with breast cancer. Based on the results obtained it can be concluded that the improved technique can be used to detect a thiolprotein in very low sample volumes and can also prevent interferences during the washing and transferring step.

Lactoferrin Isolation Using Monolithic Column Coupled with Spectrometric or Micro-Amperometric Detector

Lactoferrin is a multifunctional protein with antimicrobial activity and others tohealth beneficial properties. The main aim of this work was to propose easy to usetechnique for lactoferrin isolation from cow colostrum samples. Primarily we utilizedsodium dodecyl sulphate - polyacrylamide gel electrophoresis for isolation of lactoferrinfrom the real samples. Moreover we tested automated microfluidic Experionelectrophoresis system to isolate lactoferrin from the collostrum sample. The welldeveloped signal of lactoferrin was determined with detection limit (3 S/N) of 20 ng/ml. Inspite of the fact that Experion is faster than SDS-PAGE both separation techniques cannotbe used in routine analysis. Therefore we have tested third separation technique, ionexchange chromatography, using monolithic column coupled with UV-VIS detector (LCUV-VIS). We optimized wave length (280 nm), ionic strength of the elution solution (1.5M NaCl) and flow rate of the retention and elution solutions (0.25 ml/min and 0.75 ml/min.respectively). Under the optimal conditions the detection limit was estimated as 0.1 μg/mlof lactoferrin measured. Using LC-UV-VIS we determined that lactoferrin concentrationvaried from 0.5 g/l to 1.1 g/l in cow colostrums collected in the certain time interval up to 72 hours after birth. Further we focused on miniaturization of detection device. We testedamperometric detection at carbon electrode. The results encouraged us to attempt tominiaturise whole detection system and to test it on analysis of real samples of humanfaeces, because lactoferrin level in faeces is closely associated with the inflammations ofintestine mucous membrane. For the purpose of miniaturization we employed thetechnology of printed electrodes. The detection limit of lactoferrin was estimated as 10μg/ml measured by the screen-printed electrodes fabricated by us. The fabricatedelectrodes were compared with commercially available ones. It follows from the obtainedresults that the responses measured by commercial electrodes are app. ten times highercompared with those measured by the electrodes fabricated by us. This phenomenonrelates with smaller working electrode surface area of the electrodes fabricated by us(about 50 %) compared to the commercial ones. The screen-printed electrodes fabricatedby us were utilized for determination of lactoferrin faeces. Regarding to fact that sample offaeces was obtained from young and healthy man the amount of lactoferrin in sample wasunder the limit of detection of this method.

Utilizing of Square Wave Voltammetry to Detect Flavonoids in the Presence of Human Urine

About biological affecting of flavonoids on animal organisms is known less, thus we selected flavonoids, flavanones and flavones, and their glycosides, which were examined as potential inducers of cytochrome(s) P450 when administrated by gavages into experimental male rats. The study was focused on induction of CYP1A1, the major cytochrome P450 involved in carcinogen activation. The data obtained demonstrate the necessity of taking into account not only ability of flavonoids to bind to Ah receptor (induction factor) but also to concentrate on their distribution and metabolism (including colon microflora) in the body. After that we examined certain flavonoids as potential inducers of cytochrome P450, we wanted to suggest and optimize suitable electrochemical technique for determination of selected flavonoids (quercetin, quercitrin, rutin, chrysin and diosmin) in body liquids. For these purposes, we selected square wave voltannetry using carbon paste electrode. Primarily we aimed on investigation of their basic electrochemical behaviour. After that we have optimized frequency, step potential and supporting electrolyte. Based on the results obtained, we selected the most suitable conditions for determination of the flavonoids as follows: frequency 180 Hz, step potential 1.95 mV/s and phosphate buffer of pH 7 as supporting electrolyte. Detection limits (3 S/N) of the flavonoids were from units to tens of nM except diosmin, where the limit were higher than μM. In addition, we attempted to suggest a sensor for analysis of flavonoids in urine. It clearly follows from the results obtained that flavonoids can be analysed in the presence of animal urine, because urine did not influence much the signals of flavonoids (recoveries of the signals were about 90 %).