Photocatalytic Dye Degradation and Bio-Insights of Honey-Produced α-Fe2O3 Nanoparticles

Thermally synthesized hematite (α-Fe2O3) nanoparticles as efficient photocatalyst for visible light dye degradation

In recent years, water pollution has become a pressing global issue because of the continuous release of organic dyes from various industries. Therefore, finding an easy way to remove these harmful dyes from water has drawn the attention of researchers. This study investigates the removal of toxic Rose Bengal (RB) dye using hematite nanoparticles as a visible light photocatalyst without any additive. It is observed that by controlling particle size, quantity of the nanoparticles and reaction temperature, the dye degradation can be improved up to 95.33% with a half-life of 26 min. To understand photodegradation kinetic behavior, the Langmuir-Hinshelwood kinetic equation can be employed. The scavenger test indicated that the OH* radicals majorly led to the photodegradation process. The reaction rate values strongly depended on the size, quantity of the nanoparticles and reaction temperature. Controlling the optimizing condition, faster reaction rate (k = 0.027 min-1) can be achieved as compared to earlier reports. It is also noted that the change in the degradation efficiency of the reused catalyst is negligible when compared to the fresh one. Here, the dye degradation mechanism is discussed. Overall, this study reveals that hematite nanoparticles can be used as efficient photocatalyst for dye degradation applications by optimizing the controlling factors. These observations provide novel perspectives on the development of effective and sustainable photocatalytic technologies for pollution control and water treatment applications.

A Novel Fabrication of Hematite Nanoparticles via Recycling of Titanium Slag by Pyrite Reduction Technology

An enormous quantity of titanium slag has caused not merely serious environment pollution, but also a huge waste of iron and sulfur resources. Hence, recycling iron and sulfur resources from titanium slag has recently been an urgent problem. Herein, hematite nanoparticles were fabricated through a pyrite reduction approach using as-received titanium slag as the iron source and pyrite as the reducing agent in an nitrogen atmosphere. The physicochemical properties of the hematite nanoparticles were analyzed using multiple techniques such as X-ray diffraction pattern, ultraviolet-visible spectrophotometry, and scanning electron microscopy. The best synthesis conditions for hematite nanoparticles were found at 550 °C for 30 min with the mass ratio of 14:1 for titanium slag and pyrite. The results demonstrated that hematite nanoparticles with an average particle diameter of 45 nm were nearly spherical in shape. The specific surface area, pore volume, and pore size estimated according to the BET method were 19.6 m2/g, 0.117 cm3/g, and 0.89 nm, respectively. Meanwhile, the fabricated hematite nanoparticles possessed weak ferromagnetic behavior and good absorbance in the wavelength range of 200 nm-600 nm, applied as a visible light responsive catalyst. Consequently, these results show that hematite nanoparticles formed by the pyrite reduction technique have a promising application prospect for magnetic material and photocatalysis.

Exploring the diverse performance of nickel and cobalt spinel ferrite nanoparticles in hazardous pollutant removal and gas sensing performance

A simple sol-gel combustion process was employed for the creation of MFe2O4 (M=Ni, Co) nanoparticles. The synthesized nanoparticles, acting as both photocatalysts and gas sensors, were analyzed using various analytical techniques. MFe2O4 (M=Ni, Co) material improved the degradation of methylene blue (MB) under UV-light irradiation, serving as an enhanced electron transport medium. UV-vis studies demonstrated that NiFe2O4 achieved a 60% degradation, while CoFe2O4 nanostructure exhibited a 76% degradation efficacy in the MB dye removal process. Furthermore, MFe2O4 (M=Ni, Co) demonstrated chemosensitive-type sensor capabilities at ambient temperature. The sensor response and recovery times for CoFe2O4 at a concentration of 100 ppm were 15 and 20, respectively. Overall, the synthesis of MFe2O4 (M=Ni, Co) holds the potential to significantly improve the photocatalytic and gas sensing properties, particularly enhancing the performance of CoFe2O4. The observed enhancements make honey MFe2O4 (M=Ni, Co) a preferable choice for environmental remediation applications.

Nanoparticles-mediated entomotoxicology: lessons from biologica

Nanotechnology has grown in importance in medicine, manufacturing, and consumer products. Nanoparticles (NPs) are also widely used in the field of insect pest management, where they show a variety of toxicological effects on insects. As a result, the primary goal of this review is to compile and evaluate available information on effects of NPs on insects, by use of a timely, bibliometric analysis. We also discussed the manufacturing capacity of NPs from insect tissues and the toxic effects of NPs on insects. To do so, we searched the Web of Science database for literature from 1995 to 2023 and ran bibliometric analyses with CiteSpace© and Bibliometrix©. The analyses covered 614 journals and identified 1763 relevant documents. We found that accumulation of NPs was one of the top trending topics. China, India, and USA had the most published papers. The most overall reported models of insects were those of Aedes aegypti (yellow fever mosquito), Culex quinquefasciatus (southern house mosquito), Bombyx mori (silk moth), and Anopheles stephensi (Asian malaria mosquito). The application and methods of fabrication of NPs using insect tissues, as well as the mechanism of toxicity of NPs on insects, were also reported. A uniform legal framework is required to allow nanotechnology to fully realize its potential while minimizing harm to living organisms and reducing the release of toxic metalloid nanoparticles into the environment.

Synthesis, Characterization, and Biological Properties of Iron Oxide Nanoparticles Synthesized from Apis mellifera Honey

Green approaches for nanoparticle synthesis have emerged as biocompatible, economical, and environment-friendly alternatives to counteract the menace of microbial drug resistance. Recently, the utilization of honey as a green source to synthesize Fe2O3-NPs has been introduced, but its antibacterial activity against one of the opportunistic MDR pathogens, Klebsiella pneumoniae, has not been explored. Therefore, this study employed Apis mellifera honey as a reducing and capping agent for the synthesis of iron oxide nanoparticles (Fe2O3-NPs). Subsequent to the characterization of nanoparticles, their antibacterial, antioxidant, and anti-inflammatory properties were appraised. In UV-Vis spectroscopic analysis, the absorption band ascribed to the SPR peak was observed at 350 nm. XRD analysis confirmed the crystalline nature of Fe2O3-NPs, and the crystal size was deduced to be 36.2 nm. Elemental analysis by EDX validated the presence of iron coupled with oxygen in the nanoparticle composition. In ICP-MS, the highest concentration was of iron (87.15 ppm), followed by sodium (1.49 ppm) and other trace elements (<1 ppm). VSM analysis revealed weak magnetic properties of Fe2O3-NPs. Morphological properties of Fe2O3-NPs revealed by SEM demonstrated that their average size range was 100-150 nm with a non-uniform spherical shape. The antibacterial activity of Fe2O3-NPs was ascertained against 30 clinical isolates of Klebsiella pneumoniae, with the largest inhibition zone recorded being 10 mm. The MIC value for Fe2O3-NPs was 30 µg/mL. However, when mingled with three selected antibiotics, Fe2O3-NPs did not affect any antibacterial activity. Momentous antioxidant (IC50 = 22 µg/mL) and anti-inflammatory (IC50 = 70 µg/mL) activities of Fe2O3-NPs were discerned in comparison with the standard at various concentrations. Consequently, honey-mediated Fe2O3-NP synthesis may serve as a substitute for orthodox antimicrobial drugs and may be explored for prospective biomedical applications.

UV-Light-Driven Photocatalytic Dye Degradation and Antibacterial Potentials of Biosynthesized SiO2 Nanoparticles

The present work shows the obtainment of biosynthesized SiO2 with the aid of Jasminum grandiflorum plant extract and the study of its photocatalytic ability in dye degradation and antibacterial activity. The obtained biosynthesized SiO2 nanoparticles were characterized using X-ray diffractometer analysis, Fourier transform infrared spectroscopy analysis, ultraviolet–visible diffuse reflectance spectroscopy, field-emission scanning electron microscope with energy-dispersive X-ray analysis, transmission electron microscopy and X-ray photoelectron spectroscopy. The UV-light irradiated photocatalytic activity of the biosynthesized SiO2 nanoparticles was examined using methylene blue dye solution. Its reusability efficiency was determined over 20 cycles and compared with the commercial P-25 titanium dioxide. The bacterial resistivity of the biosynthesized SiO2 nanoparticles was examined using S. aureus and E. coli. The biosynthesized SiO2 nanoparticles showed a high level of crystallinity with no impurities, and they had an optimum crystallite size of 23 nm, a bandgap of 4 eV, no Si-OH groups and quasi-spherical shapes with Si-2p at 104 eV and O-1s at 533 eV. Their photocatalytic activity on methylene blue dye solution could reach 90% degradation after 40 min of UV light exposure, and their reusability efficiency was only 4% less than that of commercial P-25 titanium dioxide. At the concentration of 100 μg/mL, the biosynthesized SiO2 nanoparticles could allow the resistivity of E. coli to become borderline to the resistant range of an antibiotic called Amikacin.

An Analysis of the Toxicity, Antioxidant, and Anti-Cancer Activity of Cinnamon Silver Nanoparticles in Comparison with Extracts and Fractions of Cinnamomum Cassia at Normal and Cancer Cell Levels

In this work, the extract of cinnamon bark was used for the green synthesis of cinnamon-Ag nanoparticles (CNPs) and other cinnamon samples, including ethanolic (EE) and aqueous (CE) extracts, chloroform (CF), ethyl acetate (EF), and methanol (MF) fractions. The polyphenol (PC) and flavonoid (FC) contents in all the cinnamon samples were determined. The synthesized CNPs were tested for the antioxidant activity (as DPPH radical scavenging percentage) in Bj-1 normal cells and HepG-2 cancer cells. Several antioxidant enzymes, including biomarkers, superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GPx), glutathione-S-transferase (GST), and reduced glutathione (GSH), were verified for their effects on the viability and cytotoxicity of normal and cancer cells. The anti-cancer activity depended on apoptosis marker protein levels (Caspase3, P53, Bax, and Pcl2) in normal and cancerous cells. The obtained data showed higher PC and FC contents in CE samples, while CF showed the lowest levels. The IC₅₀ values of all investigated samples were higher, while their antioxidant activities were lower than those of vitamin C (5.4 g/mL). The CNPs showed lower IC₅₀ value (55.6 µg/mL), whereas the antioxidant activity inside or outside the Bj-1 or HepG-2 was found to be higher compared with other samples. All samples execrated a dose-dependent cytotoxicity by decreasing the cells' viability percent of Bj-1 and HepG-2. Similarly, the anti-proliferative potency of CNPs on Bj-1 or HepG-2 at different concentrations was more effective than that of other samples. Higher concentrations of the CNPs (16 g/mL) showed greater cell death in Bj-1 (25.68%) and HepG-2 (29.49%), indicating powerful anti-cancer properties of the nanomaterials. After 48 h of CNPs treatment, both Bj-1 and HepG-2 showed significant increases in biomarker enzyme activities and reduced glutathione compared with other treated samples or untreated controls (p < 0.05). The anti-cancer biomarker activities of Caspas-3, P53, Bax, and Bcl-2 levels were significantly changed in Bj-1 or HepG-2 cells. The cinnamon samples were significantly increased in Caspase-3, Bax, and P53, while there were decreased Bcl-2 levels compared with control.

Photocatalytic Organic Contaminant Degradation of Green Synthesized ZrO2 NPs and Their Antibacterial Activities

The green synthesis of metal oxide nanoparticles is an efficient, simple, and chemical-free method of producing nanoparticles. The present work reports the synthesis of Murraya koenigii-mediated ZrO2 nanoparticles (ZrO2 NPs) and their applications as a photocatalyst and antibacterial agent. Capping and stabilization of metal oxide nanoparticles were achieved by using Murraya koenigii leaf extract. The optical, structural, and morphological valance of the ZrO2 NPs were characterized using UV-DRS, FTIR, XRD, and FESEM with EDX, TEM, and XPS. An XRD analysis determined that ZrO2 NPs have a monoclinic structure and a crystallite size of 24 nm. TEM and FESEM morphological images confirm the spherical nature of ZrO2 NPs, and their distributions on surfaces show lower agglomerations. ZrO2 NPs showed high optical absorbance in the UV region and a wide bandgap indicating surface oxygen vacancies and charge carriers. The presence of Zr and O elements and their O=Zr=O bonds was categorized using EDX and FTIR spectroscopy. The plant molecules’ interface, bonding, binding energy, and their existence on the surface of ZrO2 NPs were established from XPS analysis. The photocatalytic degradation of methylene blue using ZrO2 NPs was examined under visible light irradiation. The 94% degradation of toxic MB dye was achieved within 20 min. The antibacterial inhibition of ZrO2 NPs was tested against S. aureus and E. coli pathogens. Applications of bio-synthesized ZrO2 NPs including organic substance removal, pathogenic inhibitor development, catalysis, optical, and biomedical development were explored.

Photocatalytic and Antibacterial Activity of CoFe2O4 Nanoparticles from Hibiscus rosa-sinensis Plant Extract

Biogenic CoFe₂O₄ nanoparticles were prepared by co-precipitation and Hibiscus rosa sinensis plant leaf was used as a bio-reductant of the nanoparticle productions. The biosynthesized CoFe₂O₄ nanoparticles were characterized by XRD, FTIR, UV, VSM, and SEM via EDX analysis. The cubic phase of biosynthesized CoFe₂O₄ nanoparticles and their crystallite size was determined by XRD. The Co-Fe-O bonding and cation displacement was confirmed by FTIR spectroscopy. The presence of spherically-shaped biosynthesized CoFe₂O₄ nanoparticles and their material were confirmed by SEM and TEM via EDX. The super-paramagnetic behaviour of the biosynthesized CoFe₂O₄ nanoparticles and magnetic pulse was established by VSM analysis. Organic and bacterial pollutants were eradicated using the biosynthesized CoFe₂O₄ nanoparticles. The spinel ferrite biosynthesized CoFe₂O₄ nanoparticles generate radical and superoxide ions, which degrade toxic organic and bacterial pollutants in the environment.