The capillary adhesion technique: a versatile method for determining the liquid adhesion force and sample stiffness

Advances in Hemostatic Hydrogels That Can Adhere to Wet Surfaces

Currently, uncontrolled bleeding remains a serious problem in emergency, surgical and battlefield environments. Despite the specific properties of available hemostatic agents, sealants, and adhesives, effective hemostasis under wet and dynamic conditions remains a challenge. In recent years, polymeric hydrogels with excellent hemostatic properties have received much attention because of their adjustable mechanical properties, high porosity, and biocompatibility. In this review, to investigate the role of hydrogels in hemostasis, the mechanisms of hydrogel hemostasis and adhesion are firstly elucidated, the adhesion design strategies of hemostatic hydrogels in wet environments are briefly introduced, and then, based on a comprehensive literature review, the studies and in vivo applications of wet-adhesive hemostatic hydrogels in different environments are summarized, and the improvement directions of such hydrogels in future studies are proposed.

Biotemplate Replication of Novel Mangifera indica Leaf (MIL) for Atmospheric Water Harvesting: Intrinsic Surface Wettability and Collection Efficiency

Water shortage has become a global crisis that has posed and still poses a serious threat to the human race, especially in developing countries. Harvesting moisture from the atmosphere is a viable approach to easing the world water crisis due to its ubiquitous nature. Inspired by nature, biotemplate surfaces have been given considerable attention in recent years though these surfaces still suffer from intrinsic trade-offs making replication more challenging. In the design of artificial surfaces, maximizing their full potential and benefits as that of the natural surface is difficult. Here, we conveniently made use of Mangifera indica leaf (MIL) and its replicated surfaces (RMIL) to collect atmosphere water. This research provides a novel insight into the facile replication mechanism of a wettable surface made of Polydimethylsiloxane (PDMS), which has proven useful in collecting atmospheric water. This comparative study shows that biotemplate surfaces (RMIL) with hydrophobic characteristics outperform natural hydrophilic surfaces (DMIL and FMIL) in droplet termination and water collection abilities. Water collection efficiency from the Replicated Mangifera indica leaf (RMIL) surface was shown to be superior to that of the Dry Mangifera indica leaf (DMIL) and Fresh Mangifera indica leaf (FMIL) surfaces. Furthermore, the wettability of the DMIL, FMIL, and RMIL was thoroughly investigated, with the apices playing an important role in droplet roll-off.

Fabrication of Salvinia-inspired surfaces for hydrodynamic drag reduction by capillary-force-induced clustering

For decades, bioinspired functional materials have been attracting the interest of many researchers for their remarkable characteristics. In particular, some plant leaves are well known for their inherent superhydrophobic nature. Salvinia molesta, a free-floating aquatic fern, has egg-beater-shaped hierarchical trichomes on its surface of leaves. Due to the unique structure and complex wettability of the hairs, this plant has the ability to maintain a stable thick air layer upon the structure when it is submerged underwater. Often referred to as the “Salvinia Effect,” this property is expected to be suitable for use in hydrodynamic drag reduction. However, due to the complex shape of the trichome, currently applied fabrication methods are using a three-dimensional printing system, which is not applicable to mass production because of its severely limited productivity. In this work, artificial Salvinia leaf inspired by S. molesta was fabricated using a conventional soft lithography method assisted with capillary-force-induced clustering of micropillar array. The fabrication method suggested in this work proposes a promising strategy for the manufacturing of Salvinia-inspired hydrodynamic drag reduction surfaces.

Salvinia molesta plant has the ability to maintain a stable air layer when submerged underwater due to its specific form. The authors propose here a soft lithography fabrication method of artificial Salvinia leaf assisted with capillary-force induced clustering of micropillar array, for hydrodynamic drag reduction.

Mangifera indica Leaf (MIL) as a Novel Material in Atmospheric Water Collection

Here, Mangifera indica leaves (MILs) have been used to collect atmospheric water for the first time. This novel material has been viewed by mankind as environmental waste and is mostly discarded or incinerated, causing environmental pollution. By turning waste into wealth, MILs have proven resourceful and can help ameliorate the water crisis, especially in tropical countries. The unprecedented water collection result is enough to describe MILs as an ideal material for atmospheric water collection when compared to other natural plants. Both the physical and chemical surface morphologies were extensively characterized. This comparative study shows that MIL surface droplet termination and hydrophilic nature differ from those of other materials, with the apex playing a key role in the roll-off of the droplet. The surface wettability and its interaction with the droplet are of keen interest in this study.

Robust Underwater Air Layer Retention and Restoration on Salvinia-Inspired Self-Grown Heterogeneous Architectures

Salvinia's long-term underwater air layer retention ability has inspired researchers to develop artificial microstructures. However, Salvinia has an exquisite combination of a complicated hollow structure and heterogeneous chemical properties, which makes artificial reproduction beyond the capabilities of traditional fabrication techniques. In addition, under extremely low underpressure conditions, the mechanism of retention and restoration of the underwater air layer of Salvinia remains unclear. Herein, by combining the shape memory polymer "top-constrained self-branching (TCSB)" and hydrophilic SiO₂ microspheres trapping, four-branch hollow microstructures with heterogeneous chemical properties are fabricated. By applying underpressure, the crucial role of hydrophilic apexes is unveiled in air layer restoration. Through the calculation of the surface energy, the underlying mechanism is well interpreted. This study holds great promise for developing Salvinia-inspired artificial structures and reveals the underlying mechanism of the robust air retention and recovery capability of Salvinia leaves in extreme environments.

The impact of raindrops on Salvinia molesta leaves: effects of trichomes and elasticity

The floating leaves of the aquatic fern Salvinia molesta are covered by superhydrophobic hairs (=trichomes) which are shaped like egg-beaters. These trichomes cause high water repellency and stable unwettability if the leaf is immersed. Whereas S. molesta hairs are technically interesting, there remains also the question concerning their biological relevance. S. molesta has its origin in Brazil within a region exposed to intense rainfall which easily penetrates the trichome cover. In this study, drop impact on leaves of S. molesta were analysed using a high-speed camera. The largest portion of the kinetic energy of a rain drop is absorbed by elastic responses of the trichomes and the leaf. Although rain water is mostly repelled, it turned out that the trichomes hamper swift shedding of rain water and some residual water can remain below the 'egg-beaters'. Drops rolling over the trichomes can, however, 'suck up' water trapped beneath the egg-beaters because the energetic state of a drop on top of the trichomes is-on account of the superhydrophobicity of the hairs-much more favourable. The trichomes may therefore be beneficial during intense rainfall, because they absorb some kinetic energy and keep the leaf base mostly free from water.

Air Retention under Water by the Floating Fern Salvinia: The Crucial Role of a Trapped Air Layer as a Pneumatic Spring

The ability of floating ferns Salvinia to keep a permanent layer of air under water is of great interest, e.g., for drag-reducing ship coatings. The air-retaining hairs are superhydrophobic, but have hydrophilic tips at their ends, pinning the air-water interface. Here, experimental and theoretical approaches are used to examine the contribution of this pinning effect for air-layer stability under pressure changes. By applying the capillary adhesion technique, the adhesion forces of individual hairs to the water surface is determined to be about 20 µN per hair. Using confocal microscopy and fluorescence labeling, it is found that the leaves maintain a stable air layer up to an underpressure of 65 mbar. Combining both results, overall pinning forces are obtained, which account for only about 1% of the total air-retaining force. It is suggested that the restoring force of the entrapped air layer is responsible for the remaining 99%. This model of the entrapped air acting is verified as a pneumatic spring ("air-spring") by an experiment shortcircuiting the air layer, which results in immediate air loss. Thus, the plant enhances its air-layer stability against pressure fluctuations by a factor of 100 by utilizing the entrapped air volume as an elastic spring.

3D-Printed Biomimetic Super-Hydrophobic Structure for Microdroplet Manipulation and Oil/Water Separation

Biomimetic functional surfaces are attracting increasing attention for various technological applications, especially the superhydrophobic surfaces inspired by plant leaves. However, the replication of the complex hierarchical microstructures is limited by the traditional fabrication techniques. In this paper, superhydrophobic micro-scale artificial hairs with eggbeater heads inspired by Salvinia molesta leaf was fabricated by the Immersed surface accumulation three dimensional (3D) printing process. Multi-walled carbon nanotubes were added to the photocurable resins to enhance the surface roughness and mechanical strength of the microstructures. The 3D printed eggbeater surface reveals interesting properties in terms of superhydrophobilicity and petal effect. The results show that a hydrophilic material can macroscopically behave as hydrophobic if a surface has proper microstructured features. The controllable adhesive force (from 23 μN to 55 μN) can be easily tuned with different number of eggbeater arms for potential applications such as micro hand for droplet manipulation. Furthermore, a new energy-efficient oil/water separation solution based on our biomimetic structures was demonstrated. The results show that the 3D-printed eggbeater structure could have numerous applications, including water droplet manipulation, 3D cell culture, micro reactor, oil spill clean-up, and oil/water separation.

Fabrication of a superhydrophobic surface with underwater air-retaining properties by electrostatic flocking

The aquatic fern salvinia can retain an air layer on its hairy leaf surface when submerged under water, which is an inspiration for biomimetic applications like drag reduction. In this research, an electrostatic flocking technique is used to produce a hairy surface to mimic the air-trapping performance of the salvinia leaf. Viscose and nylon flocks with different sizes were selected. A volumetric method was established to analyze the air-retaining performance of the flocking samples, Salvinia molesta and lotus leaves as well. Through air volume change analyses, it is found that another factor that can affect the Salvinia molesta air-retaining ability is the curving of the leaf under water. A flocking sample fabricated by a kind of nylon flock is demonstrated to have a comparable air-retaining ability under static conditions as a Salvinia molesta leaf in its flat form.

A flocking sample with underwater air-trapping abilities mimicking the Salvinia molesta leaf was fabricated and evaluated.

Plant Surfaces: Structures and Functions for Biomimetic Innovations

An overview of plant surface structures and their evolution is presented. It combines surface chemistry and architecture with their functions and refers to possible biomimetic applications. Within some 3.5 billion years biological species evolved highly complex multifunctional surfaces for interacting with their environments: some 10 million living prototypes (i.e., estimated number of existing plants and animals) for engineers. The complexity of the hierarchical structures and their functionality in biological organisms surpasses all abiotic natural surfaces: even superhydrophobicity is restricted in nature to living organisms and was probably a key evolutionary step with the invasion of terrestrial habitats some 350-450 million years ago in plants and insects. Special attention should be paid to the fact that global environmental change implies a dramatic loss of species and with it the biological role models. Plants, the dominating group of organisms on our planet, are sessile organisms with large multifunctional surfaces and thus exhibit particular intriguing features. Superhydrophilicity and superhydrophobicity are focal points in this work. We estimate that superhydrophobic plant leaves (e.g., grasses) comprise in total an area of around 250 million km2, which is about 50% of the total surface of our planet. A survey of structures and functions based on own examinations of almost 20,000 species is provided, for further references we refer to Barthlott et al. (Philos. Trans. R. Soc. A 374: 20160191, 1). A basic difference exists between aquatic non-vascular and land-living vascular plants; the latter exhibit a particular intriguing surface chemistry and architecture. The diversity of features is described in detail according to their hierarchical structural order. The first underlying and essential feature is the polymer cuticle superimposed by epicuticular wax and the curvature of single cells up to complex multicellular structures. A descriptive terminology for this diversity is provided. Simplified, the functions of plant surface characteristics may be grouped into six categories: (1) mechanical properties, (2) influence on reflection and absorption of spectral radiation, (3) reduction of water loss or increase of water uptake, moisture harvesting, (4) adhesion and non-adhesion (lotus effect, insect trapping), (5) drag and turbulence increase, or (6) air retention under water for drag reduction or gas exchange (Salvinia effect). This list is far from complete. A short overview of the history of bionics and the impressive spectrum of existing and anticipated biomimetic applications are provided. The major challenge for engineers and materials scientists, the durability of the fragile nanocoatings, is also discussed.

Superhydrophobic hierarchically structured surfaces in biology: evolution, structural principles and biomimetic applications

A comprehensive survey of the construction principles and occurrences of superhydrophobic surfaces in plants, animals and other organisms is provided and is based on our own scanning electron microscopic examinations of almost 20 000 different species and the existing literature. Properties such as self-cleaning (lotus effect), fluid drag reduction (Salvinia effect) and the introduction of new functions (air layers as sensory systems) are described and biomimetic applications are discussed: self-cleaning is established, drag reduction becomes increasingly important, and novel air-retaining grid technology is introduced. Surprisingly, no evidence for lasting superhydrophobicity in non-biological surfaces exists (except technical materials). Phylogenetic trees indicate that superhydrophobicity evolved as a consequence of the conquest of land about 450 million years ago and may be a key innovation in the evolution of terrestrial life. The approximate 10 million extant species exhibit a stunning diversity of materials and structures, many of which are formed by self-assembly, and are solely based on a limited number of molecules. A short historical survey shows that bionics (today often called biomimetics) dates back more than 100 years. Statistical data illustrate that the interest in biomimetic surfaces is much younger still. Superhydrophobicity caught the attention of scientists only after the extreme superhydrophobicity of lotus leaves was published in 1997. Regrettably, parabionic products play an increasing role in marketing.This article is part of the themed issue 'Bioinspired hierarchically structured surfaces for green science'.