Theoretical study on β-cyclodextrin inclusion complexes with propiconazole and protonated propiconazole

β-Cyclodextrin Catalyzed, One-Pot Multicomponent Synthesis and Antimicrobial Potential of N-Aminopolyhydroquinoline Derivatives

In the present report, we have described the synthesis of N-aminopolyhydroquinoline (N-PHQ) derivatives using highly efficient β-cyclodextrin (β-CD) as a catalyst by the Hantzsch condensation of substituted aromatic aldehydes, dimedone, and hydrazine hydrate in one pot. The reactions were completed in a shorter time without the generation of any other byproduct. The synthesized N-PHQs were washed thoroughly with distilled water and recrystallized with ethanol to get highly purified products (as crystals). The structure of the synthesized N-PHQs was established by using advanced spectroscopic techniques like FT-IR, NMR (1H, 13C, DEPT, COSY, and HSQC), ESI-MS, and Elemental Analyzer. The N-PHQs derivatives demonstrated moderate to excellent resistance against the tested strains (both fungal as well as bacterial). The presence of polar groups, which are able to form H-bonds, attached to the phenyl ring like -NO2 (4b and 4c), and -OMe (4i, 4j, and 4k) exhibits excellent activity, which is comparable to standard drugs, amoxicillin and fluconazole.

The Effect of Alkali Iodide Salts in the Inclusion Process of Phenolphthalein in β-Cyclodextrin: A Spectroscopic and Theoretical Study

The formation of the inclusion complex between β-cyclodextrin (CD) and phenolphthalein (PP) was investigated by means of UV-Vis and FT-IR spectroscopies. The thermodynamic parameters were calculated in the absence and presence of LiI, KI, NaI and CsI iodide salts. The enthalpy change during the formation was found to be negative for all solutions with iodide salts. The enthalpy change was found to decrease in the sequence no salt > NaI > KI> CsI > LiI. Moreover, it was observed that with increasing salt concentration enthalpy decreases monotonically. The interaction between the two molecules was mostly attributed to hydrogen bonding and Van der Waals interactions. Thermodynamic properties revealed that electrostatic forces also contribute when LiI is present in solutions. A molecular docking study was performed to elucidate the docking between phenolphthalein and cyclodextrin. The FT-IR spectra of CD, PP and the CD-PP complex were recorded to establish the formation of the inclusion complex. Semi-empirical and DFT methods were utilized to study theoretically the complexation process and calculate the IR vibrational spectra. The adequate agreement between theoretical and experimental results supports the proposed structural model for the CD-PP complexation.

Improving Lurasidone Hydrochloride's Solubility and Stability by Higher-Order Complex Formation with Hydroxypropyl-β-cyclodextrin

The biopharmaceutical classification system groups low-solubility drugs into two groups: II and IV, with high and low permeability, respectively. Most of the new drugs developed for common pathologies present solubility issues. This is the case of lurasidone hydrochloride-a drug used for the treatment of schizophrenia and bipolar depression. Likewise, the stability problems of some drugs limit the possibility of preparing them in liquid pharmaceutical forms where hydrolysis and oxidation reactions can be favored. Lurasidone hydrochloride presents the isoindole-1,3-dione ring, which is highly susceptible to alkaline hydrolysis, and the benzisothiazole ring, which is susceptible to a lesser extent to oxidation. Herein, we propose to study the increase in the solubility and stability of lurasidone hydrochloride by the formation of higher-order inclusion complexes with hydroxypropyl-β-cyclodextrin. Several stoichiometric relationships were studied at between 0.5 and 3 hydroxypropyl-β-cyclodextrin molecules per drug molecule. The obtained products were characterized, and their solubility and stability were assessed. According to the obtained results, the formation of inclusion complexes dramatically increased the solubility of the drug, and this increased with the increase in the inclusion ratio. This was associated with the loss of crystalline state of the drug, which was in an amorphous state according to infrared spectroscopy, calorimetry, and X-ray analysis. This was also correlated with the stabilization of lurasidone by the cyclodextrin inhibiting its recrystallization. Phase solubility,¹H-NMR, and docking computational characterization suggested that the main stoichiometric ratio was 1:1; however, we cannot rule out a 1:2 ratio, where a second cyclodextrin molecule could bind through the isoindole-1,3-dione ring, improving its stability as well. Finally, we can conclude that the formation of higher-order inclusion complexes of lurasidone with hydroxypropyl-β-cyclodextrin is a successful strategy to increase the solubility and stability of the drug.

In Search of Preferential Macrocyclic Hosts for Sulfur Mustard Sensing and Recognition: A Computational Investigation through the New Composite Method r2SCAN-3c of the Key Factors Influencing the Host-Guest Interactions

Sulfur mustard (SM) is a harmful warfare agent that poses a serious threat to human health and the environment. Thus, the design of porous materials capable of sensing and/or capturing SM is of utmost importance. In this paper, the interactions of SM and its derivatives with ethylpillar[5]arene (EtP[5]) and the interactions between SM and a variety of host macrocycles were investigated through molecular docking calculations and non-covalent interaction (NCI) analysis. The electronic quantum parameters were computed to assess the chemical sensing properties of the studied hosts toward SM. It was found that dispersion interactions contributed significantly to the overall complexation energy, leading to the stabilization of the investigated systems. DFT energy computations showed that SM was more efficiently complexed with DCMP[5] than the other hosts studied here. Furthermore, the studied macrocyclic containers could be used as host-based chemical sensors or receptors for SM. These findings could motivate experimenters to design efficient sensing and capturing materials for the detection of SM and its derivatives.

Cyclodextrin mediated controlled release of edaravone from pH-responsive sodium alginate and chitosan based nanocomposites

The objective of the study is to enhance the aqueous solubility and stability of edaravone, a free radical scavenger drug. Inclusion complexes of edaravone with β-cyclodextrin were prepared by microwave irradiation and physical mixture method and confirmation of inclusion complexes were investigated by different analytical techniques such as FT-IR, ROESY, DSC, and ¹H NMR. pH-sensitive nanocomposites based on chitosan (CH), sodium alginate (ALG), and bentonite (BN) were synthesized. To get the maximum percentage swelling different reaction parameters that are responsible for the synthesis of the nanocomposite were optimized and characterized by various techniques such as FESEM, EDS, XRD, and FT-IR. To regulate the drug delivery, inclusion complexes were directly loaded into the CH/ALG hydrogel, and CH/ALG/BN nanocomposite and release studies were evaluated at different pH environments. The solubility of edaravone was investigated by phase solubility and the graph results in a typical A_L type behavior, suggesting the formation of a 1:1 stoichiometry inclusion complex. The comparative evaluation of drug release was explored by kinetic models. Controlled release of drug was achieved from CH/ALG/BN nanocomposite in comparison to CH/ALG hydrogel. The exploratory kinetic investigation revealed that β-CD plays a critical role in the drug release process by influencing polymer relaxation, resulting in slow release.

New Antifungal Compound: Impact of Cosolvency, Micellization and Complexation on Solubility and Permeability Processes

Poor solubility of new antifungal of 1,2,4-triazole class (S-119)—a structural analogue of fluconazole in aqueous media was estimated. The solubility improvement using different excipients: biopolymers (PEGs, PVP), surfactants (Brij S20, pluronic F-127) and cyclodextrins (α-CD, β-CD, 2-HP-β-CD, 6-O-Maltosyl-β-CD) was assessed in buffer solutions pH 2.0 and pH 7.4. Additionally, 2-HP-β-CD and 6-O-Maltosyl-β-CD were proposed as promising solubilizers for S-119. According to the solubilization capacity and micelle/water partition coefficients in buffer pH 7.4 pluronic F-127 was shown to improve S-119 solubility better than Brij S20. Among biopolymers, the greatest increase in solubility was shown in PVP solutions (pH 7.4) at concentrations above 4 w/v%. Complex analysis of the driving forces of solubilization, micellization and complexation processes matched the solubility results and suggested pluronic F-127 and 6-O-Maltosyl-β-CD as the most effective solubilizing agents for S-119. The comparison of S-119 diffusion through the cellulose membrane and lipophilic PermeaPad barrier revealed a considerable effect of the lipid layer on the decrease in the permeability coefficient. According to the PermeaPad, S-119 was classified as a highly permeated substance. The addition of 1.5 w/v% CDs in donor solution moves it to low-medium permeability class.

Comparative analysis of solubilization and complexation characteristics for new antifungal compound with cyclodextrins. Impact of cyclodextrins on distribution process

From a pharmaceutical standpoint, cyclodextrin-based products have deservedly gained substantial market share due to their ability to improve undesirable physicochemical properties of drugs. In this study the solubility of a potenial antifungal compound (L-173) has been improved essentially by addition of β-cyclodextrin (β-CD), 2-hydroxypropyl-β-cyclodextrin (HP-β-CD), and heptakis(2,6-di-O-methyl)-β-cyclodextrin (DM-β-CD) in aqueous solutions (pH 2.0 and pH 7.4) at 298.15-313.15 K. The phase solubility diagrams were constructed. The stoichiometric ratio of the complexes was determined as 1:1. The stability constants of L-173 with all three CDs in acidic medium belong to the range optimal for the improvement of the bioavailability of hydrophobic drugs. DM-β-CD was assigned as the best solubilizer for L-173. The driving forces of the solubilization and complexation process were revealed by evaluating the thermodynamic parameters. The distribution behavior of L-173 in the 1-octanol/buffer and 1-hexane buffer systems at pH 2.0 and pH 7.4 in the presence of different CDs concentrations was studied. The reduction of the distribution coefficients with the increasing of CD concentration was detected due to complex formation. Based on the analysis of the solubility-distribution relationship, the L-173 partitioning between the biological tissues and penetration through the biological membranes in case when cyclodextrins are used as solubilizers was evaluated, and the optimal CD concentrations were proposed.

Theoretical Modeling of Long-Time Drug Release from Nitrosalicyl-Imine-Chitosan Hydrogels through Multifractal Logistic Type Laws

Drug release is a complex phenomenon due to the large number of interdependent side effects that occur simultaneously, involving strong nonlinear dynamics. Therefore, since their theoretical description is difficult in the classical mathematics modelling, we have built a theoretical model based on logistic type laws, validated by the correlations with the experimental data, in a special case of drug release from hydrogels. The novelty of our approach is the implementation of multifractality in logistic type laws, situation in which any chaotic system, characterized by a small number of nonlinear interactions, gets memory and, implicitly, characterization through a large number of nonlinear interactions. In other words, the complex system polymer-drug matrix becomes “pseudo-intelligent.”

Mass Spectrometry as a Complementary Approach for Noncovalently Bound Complexes Based on Cyclodextrins

An important and well-designed solution to overcome some of the problems associated with new drugs is provided by the molecular encapsulation of the drugs in the cyclodextrins (CDs) cavity, yielding corresponding inclusion complexes (ICs). These types of non-covalent complexes are of current interest to the pharmaceutical industry, as they improve the solubility, stability and bioavailability of the guest molecules. This review highlights several methods for cyclodextrin ICs preparation and characterization, focusing mostly on the mass spectrometry (MS) studies that have been used for the detection of noncovalent interactions of CDs inclusion complexes and binding selectivity of guest molecules with CDs. Furthermore, the MS investigations of several ICs of the CD with antifungal, antioxidants or fluorescent dyes are presented in greater details, pointing out the difficulties overcome in the analysis of this type of compounds.

Multifunctional magnetic cargo-complexes with radical scavenging properties

Core-shell magnetic nanoparticle synthesis offers the opportunity to engineering their physical properties for specific applications when the intrinsic magnetic properties can be associated with other interesting ones. The purpose of this study was to design, synthesize, and characterize core-shell magnetic nanoparticles that mimic superoxide dismutase activity offering the possibility of guidance and therapeutic action. We proposed, for the first time, the synthesis and characterization of the nanocarriers comprised of magnetite nanoparticles functionalized with branched polyethyleneimine of low molecular weight (1.8 kDa) permitting the loading of the protocatechuic acid or its inclusion complex with anionic sulfobutylether-β-cyclodextrin for active drug delivery, in order to combine the useful properties of the magnetite and the protocatechuic acid antioxidant effect. NMR and DSC analyses confirmed the formation of the inclusion complex between sulfobutylether-β-cyclodextrin and protocatechuic acid, while structural and compositional analyses (FT-IR, TEM, XRD) revealed the synthesis of the multifunctional magnetic systems. Due to the possibility of being formulated as blood system injectable suspensions, antioxidant activity (using DPPH test) and cytotoxicity (using MTS assay on normal human dermal fibroblasts cells) were also measured, showing adequate properties to be used in biomedical applications. Moreover, we proposed a nanocarrier that would be able to load unstable active principles and with very low solubility in biological fluids to increase their biological ability.

Simultaneous removal of five triazole fungicides from synthetic solutions on activated carbons and cyclodextrin-based adsorbents

In this study, an adsorption-oriented process for the removal of fungicides from polycontaminated aqueous solutions was applied. To remove triazole fungicides from aqueous mixtures of propiconazole (PROPI), tebuconazole (TEBU), epoxiconazole (EPOXI), bromuconazole (BROMU) and difenoconazole (DIFENO), several materials used as adsorbents were compared using batch experiments, namely two conventional activated carbons (ACs) and five nonconventional cross-linked cyclodextrin (CD)-based materials (α-CDP, β-CDP, γ-CDP, αβγ-CDP mixture, and hydroxypropyl-β-CDP). This article presents the abatements obtained. As expected, ACs exhibited the highest levels of triazole fungicide removal: the treatment lowered the five azoles by more than 99%, and adsorption was non-selective. Concerning CD-based materials employed for the first time for the removal of fungicides from polycontaminated aqueous solutions, results were interesting in particular for hydroxypropyl-β-CDP: 1 g of adsorbent placed in 1 L of solution containing 1 mg of each of five triazoles (5 mg in total) was able to remove over half of the fungicide amount (2.97 mg). The order obtained was the following: BROMU << PROPI ≅ EPOXI < TEBU << DIFENO. This indicates that, in the mixture studied, strong competition prevailed among fungicides for the binding sites.

Synthesis, antimicrobial and anticonvulsant screening of small library of tetrahydro-2H-thiopyran-4-yl based thiazoles and selenazoles

Synthesis and investigation of antimicrobial activity of 22 novel thiazoles and selenazoles derived from dihydro-2H-thiopyran-4(3H)-one are presented. Additionally, anticonvulsant activity of six derivatives is examinated. Among the derivatives, compounds 4a-f, 4i, 4k, 4 l, 4n, 4o-s and 4v have very strong activity against Candida spp. with MIC = 1.95-15.62 μg/ml. In the case of compounds 4a-f, 4i, 4k, 4 l, 4n, 4o, 4r and 4s, the activity is very strong against some strains of Candida spp. isolated from clinical materials, with MIC = 0.98 to 15.62 μg/ml. Additionally, compounds 4n-v are found to be active against Gram-positive bacteria with MIC = 7.81-62.5 μg/ml. The results of anticonvulsant screening reveal that compounds 4a, 4b, 4m and 4n demonstrate a statistically significant anticonvulsant activity in the pentylenetetrazole model, whereas compounds 4a and 4n showed protection in 6-Hz psychomotor seizure model. Noteworthy, none of these compounds impaired animals' motor skills in the rotarod test. We also performed quantum chemical calculation of interaction and binding energies in complex of 4a with cyclodextrin.

Inclusion complexes of propiconazole nitrate with substituted β-cyclodextrins: the synthesis and in silico and in vitro assessment of their antifungal properties

Inclusion complexes with sulfobutylether-β-cyclodextrin, β-cyclodextrin sulphated sodium salt and monochlorotriazinyl-β-cyclodextrin were characterized and assessed for antifungal activity and cytotoxicity.

Species distribution and susceptibility profile to fluconazole, voriconazole and MXP-4509 of 551 clinical yeast isolates from a Romanian multi-centre study

This is the first multi-centre study regarding yeast infections in Romania. The aim was to determine the aetiological spectrum and susceptibility pattern to fluconazole, voriconazole and the novel compound MXP-4509. The 551 isolates were identified using routine laboratory methods, matrix-assisted laser desorption ionisation time-of-flight mass spectrometry (MALDI-TOF MS) and DNA sequence analysis. Susceptibility testing was performed using the European Committee for Antimicrobial Susceptibility Testing (EUCAST) method and breakpoints. The yeasts originated from superficial infections (SUP, 51.5 %), bloodstream infections (BSI, 31.6 %) and deep-seated infections (DEEP, 16.9 %), from patients of all ages. Nine genera and 30 species were identified. The 20 Candida species accounted for 94.6 % of all isolates. C. albicans was the overall leading pathogen (50.5 %). Lodderomyces elongisporus is reported for the first time as a fungaemia cause in Europe. C. glabrata and Saccharomyces cerevisiae, as well as the non-Candida spp. and non-albicans Candida spp. groups, showed decreased fluconazole susceptibility (<75 %). The overall fluconazole resistance was 10.2 %. C. krusei accounted for 27 of the 56 fluconazole-resistant isolates. The overall voriconazole resistance was 2.5 % and was due mainly to C. glabrata and C. tropicalis isolates. Fluconazole resistance rates for the three categories of infection were similar to the overall value; voriconazole resistance rates differed: 4 % for BSI, 3.2 % for DEEP and 1.4 % for SUP. The antifungal activity of MXP-4509 was superior to voriconazole against C. glabrata and many fluconazole-resistant isolates. There was a large percentage of non-albicans Candida isolates. A large part of the high fluconazole resistance was not acquired but intrinsic, resulting from the high percentage of C. krusei.

Host-guest complexes of calix[4]tubes--prediction of ion selectivity by quantum chemical calculations VI

The selectivity of the bis(calix[4]arene)tetraethylene abbreviated as calix[4]tube for the endohedral complexation of alkali and alkaline earth metal ions, was predicted on the basis of structures and complex formation energies computed with three different quantum chemical methods: DFT LANL2DZp)/LANL2DZp), PM3/SPASS, and PM6. A comparison with published X-ray structures demonstrated that the most reliable results were achieved applying DFT calculations. The complexation of K⁺ and Ba²⁺ is most favorable, followed by the encapsulation of Rb⁺ and Sr²⁺, respectively. The flexibility of the tube, described by the torsion angles associated with the ethylene linkages between the calix[4]arene units and phenyl rings intersecting the plane of the four methylene carbon atoms, also makes an important contribution to its selectivity. In general, the cavity size is similar to [2.2.2] and [N2N2N2], the cryptands with the largest cavities previously studied in our group applying a similar protocol.

Host-guest complexes of mixed glycol-bipyridine cryptands: prediction of ion selectivity by quantum chemical calculations, part V

The selectivity of the cryptands [2.2.bpy] and [2.bpy.bpy] for the endohedral complexation of alkali, alkaline-earth and earth metal ions was predicted on the basis of the DFT (B3LYP/LANL2DZp) calculated structures and complex-formation energies. The cavity size in both cryptands lay between that for [2.2.2] and [bpy.bpy.bpy], such that the complexation of K(+), Sr(2+) and Tl(3+) is most favorable. While the [2.2.bpy] is moderately larger, preferring Rb(+) complexation and demonstrating equal priority for Sr(2+) and Ba(2+), the slightly smaller [2.bpy.bpy] yields more stable cryptates with Na(+) and Ca(2+). Although the CH2-units containing molecular bars fixed at the bridgehead nitrogen atoms determine the flexibility of the cryptands, the twist angles associated with the bipyridine and glycol building blocks also contribute considerably.