The Development of Lyophilized Loop-mediated Isothermal Amplification Reagents for the Detection of Coxiella burnetii

Advanced Lyophilised Loop Mediated Isothermal Amplification (L-LAMP) based point of care technique for the detection of dengue virus

Dengue virus infects millions of the people globally each year and its diagnosis remains a challenge. Conventionally used diagnostic methods are complex and time consuming. LAMP technique is a potential alternative for diagnosis of dengue virus. The benefits of LAMP are its ease and ability, as it does not require an expensive equipment and results are effortlessly visualized by the naked eye. However, it does not aid as point of care technique owing to need of contamination free area, deep freezer for chemical storage and primer self amplification. Each small modification in LAMP method bring it towards an ideal point of care technique. An advanced lyophilized loop mediated isothermal amplification (L-LAMP) was developed in which the dye was dried on the cap and reaction reagents was lyophilized at the bottom of the tube to overcome the common hurdles of LAMP technique. The technique was able to diagnose disease within 35 min with 4U of Bst polymerase. The least concentration of dye required was 1000×. Result given by the seminested reverse transcriptase polymerase chain reaction (RT-PCR) and L-LAMP with enzyme linked immuno sorbent assay (ELISA) were compared using Chi square test. The L-LAMP showed 100 % specificity and 92 % sensitivity with respect ELISA and was found better than RT-PCR which showed 100 % specificity and 88 % sensitivity. There was no cross reactivity of primers with other disease like malaria caused by Plasmodium falciparum and P. vivax and with viral disease chikungunya. L-LAMP has dynamic potential as point of care technique.

Evaluation of the stability of lyophilized loop-mediated isothermal amplification reagents for the detection of Coxiella burnetii

Coxiella burnetii, the causative pathogen for Q fever, is an obligate intracellular bacterium and designated as a biosafety level 3 agent. Detection and quantification of the bacteria with conventional culturing methods is time-consuming and poses significant health risks. Polymerase chain reaction (PCR)-based assays have been developed for detecting C. burnetii and could provide rapid diagnosis. However, they require specialized equipment, including a cold chain for PCR reagents that maintains their stability during storage and transport. These requirements limit the advantage of PCR-based methods, especially in resource-limited areas.

Previously, we had developed a lyophilized loop-mediated isothermal amplification (LAMP) assay to detect the presence of C. burnetii. To simplify and improve this assay, the reagents for the LAMP assay and the detecting reagent, SYBR green, were lyophilized together. The stability of the lyophilized reagents was evaluated by measuring changes in detection limit for plasmid DNA encoding a C. burnetii gene upon storage at 4 °C, 25 °C, or 37 °C. Our data indicate that the lyophilized reagents remain stable for 24 months when stored at 4 °C, 28 days at 25 °C, and 2 days at 37 °C. This improved LAMP assay can be easily performed in a simple water bath or heating block. The stability at ambient temperature, the simplicity of assay procedure, and the availability of low cost equipment make this method ideal for use in resource-limited settings where Q fever is endemic.

A simple check valve for microfluidic point of care diagnostics

Check valves are often essential components in microfluidic devices, enabling automated sample processing for diagnostics at the point of care. However, there is an unmet need for a check valve design that is compatible with rigid thermoplastic devices during all stages of development-from initial prototyping with a laser cutter to final production with injection molding. Here, we present simple designs for a passive, normally closed check valve that is manufactured from commonly available materials with a CO₂ laser and readily integrated into prototype and production thermoplastic devices. The check valve consists of a thermoplastic planar spring and a soft elastomeric pad that act together to seal against fluid backflow. The valve's cracking pressure can be tuned by modifying the spring's planar geometry and thickness. Seal integrity is improved with the addition of a raised annular boss beneath the elastomeric pad. To demonstrate the valve's usefulness, we employ these valves to create a finger-operated on-chip reagent reservoir and a finger-actuated pneumatic pump. We also apply this check valve to passively seal a device to enable portable detection of RNA from West Nile virus in a laser-cut device.