In vitro biocompatibility and bioactivity of calcium silicate‑based bioceramics in endodontics (Review)

Bioceramics in Endodontics: Limitations and Future Innovations-A Review

Bioceramic materials for endodontic treatments have gradually transformed over the years into materials with enhanced biocompatibility and chemical and mechanical properties compared to earlier generations. In endodontics procedures, these materials are used as restorative material in applications such as root-end fillings, pulp capping, perforations repair, and apexification repair procedures. However, they have far from ideal mechanical and handling properties, biocompatibility issues, aesthetic concerns due to tooth discolouration, limited antibacterial activity, and affordability, which are amongst several key limitations. Notably, bioceramic materials are popular due to their biocompatibility, sealing ability, and durability, consequently surpassing traditional materials such as gutta-percha and zinc oxide-eugenol sealers. A lack of recent advancements in the field, combined with nanomaterials, has improved the formulations of these materials to overcome these limitations. The existing literature emphasises the benefits of bioceramics while underreporting their poor mechanical properties, handling difficulties, cost, and various other drawbacks. The key gaps identified in the literature are the insufficient coverage of emerging materials, narrow scope, limited insights into future developments, and underreporting of failures and complications of the existing materials. Consequently, this review aims to highlight the key limitations of various endodontic materials, primarily focusing on calcium silicate, calcium phosphate, and bioactive glass-based materials, which are the most abundantly used materials in dentistry. Based on the literature, bioceramic materials in endodontics have significantly improved over recent years, with different combinations of materials and technology compared to earlier generations while preserving many of their original properties, with some having affordable costs. This review also identified key innovations that could shape the future of endodontic materials, highlighting the ongoing evolution and advancements in endodontic treatments.

Periapically Extruded Calcium Silicate Cements in Retreated Teeth: A Case Report and Literature Review

Calcium silicate-based materials, known for their bioactive properties, are increasingly being used in endodontic therapy. Accidental extrusion of these materials into the periapical tissue is a relatively common phenomenon that can impede periapical healing. The aim of this article is to present three endodontically retreated case reports with moderate to extensive periapical lesions and to review the literature on this topic. The comprehensive search and analysis of the relevant literature included a review of 51 articles, of which nine case reports/series from 2010 to 2023 were considered. Based on the summarized data, over 80% of the retreated cases showed complete healing of the periapical lesions, while the success rate in initially treated teeth was over 90%. Healing of periapical lesions is the most common therapeutic outcome, even in cases where extrusion occurs. Despite this conclusion, extrusion of materials into periapical tissues should be avoided. Further case reports on the extrusion of calcium silicate-based materials other than MTA are recommended. When evaluating the success rate of periapical healing in such cases, it is recommended to extend the follow-up periods to several years.

Intentional Replantation of C-shaped Mandibular Second Premolar with Radicular Groove

C-shaped roots with radicular grooves are uncommon in mandibular premolars. Bacteria residing in the radicular groove and associated accessory canals can contribute to persistent periradicular infections. Eradicating bacteria in these less accessible areas remains a significant challenge in endodontic procedures. This report describes the successful management of a left mandibular second premolar (#20) with a persistent lesion related to a lingual radicular groove through an intentional replantation procedure. A 31-year-old Chinese male complained of a gum swelling related to tooth #20 which was endodontically treated and crowned 6 years ago. Clinical examination revealed a lingually located sinus tract and a clinically intact crown restoration. The tooth was not tender to percussion or palpation, with probing depths not exceeding 4 mm, and showed physiological mobility. A periapical radiograph showed the lingual sinus tract traced to the mid third of the root, which had an adequate root canal filling and an intact periodontal ligament around the apical region. A cone-beam computed tomography image revealed radiolucency at the mid third region and on the lingual aspect related to the radicular groove of this C-shaped premolar. Intentional replantation was performed due to the location of the mid-root lesion related to the lingual radicular groove. Tooth #20 was extracted atraumatically, a stained radicular groove was identified, cleansed and sealed with Biodentine, and the tooth replanted. At 2.5-year follow-up, the patient was clinically asymptomatic. Tooth #20 presented with normal probing depths and mobility and healing was observed on the cone-beam computed tomography images.

Comparative study of nanohydroxyapatite-emdogain effects on apical papilla stem cell survival and differentiation

BACKGROUND

The study was designed to explore the enhanced impact of nano-hydroxyapatite and emdogain on the survival and osteogenic/odontogenic differentiation of human stem cells isolated from the apical papilla (hSCAPs).

MATERIALS AND METHODS

In this in vitro trial, hSCAPS obtained from intact impacted immature third molars were confirmed to have characteristic cell surface markers, then exposed to nanohydroxyapatite, emdogain, and nanohydroxyapatite coated with emdogain for durations of 1-3 days. The survival of apical papilla stem cells was measured using a methyl thiazolyl tetrazolium assay. The quantitative reverse transcription polymerase chain reaction, alkaline phosphatase activity (ALP) and Alizarin red staining were used to evaluate osteogenic-odontogenic differentiation. Analysis of the data was done using one-way ANOVA, t-test, and Mann-Whitney test (α = 0.05).

RESULTS

At 1-3 days, emdogain exhibited no significant impact on the survival of human stem cells from the apical papilla. In contrast, nanohydroxyapatite (α > 0.05) and nanohydroxyapatite coated with emdogain demonstrated a notable reduction in cell survival compared to the control group (α < 0.05). The expression of dentin sialophosphoprotein, dentin matrix protein 1, and bone sialoprotein genes demonstrated a notable increase in the group treated with nanohydroxyapatite coated with emdogain compared to the other groups (α < 0.05), and furthermore, this group exhibited more pronounced mineralized nodules than the other experimental groups.

CONCLUSION

In contrast to nanohydroxyapatite, Emdogain did not demonstrate a detrimental effect on the survival of hSCAPs. Nanohydroxyapatite, emdogain, and nanohydroxyapatite coated with emdogain increased osteogenic/odontogenic differentiation of hSCAPs.

Physical, chemical and biological properties of MTA Angelus and novel AGM MTA: an in vitro analysis

INTRODUCTION

Mineral trioxide aggregate (MTA) is a calcium silicate-based cement that has changed conventional dental therapeutic approaches. This study aimed to evaluate physical, chemical and biological properties of novel AGM MTA, in comparison with MTA Angelus.

METHODS

The samples were prepared according to the manufacturer's instructions. The initial and final setting times were measured via a Gillmore needle following the ISO 6876:2012 standard. The radiopacity of the materials was evaluated against an aluminium step wedge on the basis of the ISO 6876 and 13,116 standards. The pH changes were measured at intervals of 3, 6, 24, 72, 96 and 144 h postimmersion in Hank's solution and calcium ion release was analysed after 168 h of immersion via inductively coupled plasma optical emission spectroscopy (ICP‒OES). Moreover, the cytotoxicity was assessed through the MTT assay on human dental pulp stem cells (hDPSCs) after 24 and 72 h of exposure to the set/fresh status of various dilutions of MTA extracts, following the ISO 10993-12 standard.

RESULTS

No significant difference was found between the initial setting times of the two materials (Angelus: 11.0 ± 1.0 min, AGM: 10.3 ± 1.5 min); however, MTA Angelus demonstrated a significantly shorter final setting time. Both materials met the minimum radiopacity requirements according to the ISO 6876 standard, with MTA Angelus exhibiting greater radiopacity than AGM MTA. Both materials created an alkaline environment without presenting any differences in each time point and AGM MTA released significantly greater amounts of calcium ions. In the cytotoxicity assessment, while the diluted extracts of both materials did not elicit any cytotoxic effects, the nondiluted samples, after 72 h of exposure, as well as the 30-min set AGM MTA after 24 h of exposure, were shown to be cytotoxic.

CONCLUSIONS

In conclusion, MTA Angelus presented a faster setting time and lower cytotoxicity, while AGM MTA demonstrated greater calcium ion release. However, both materials presented clinically acceptable properties and AGM MTA could be a potential alternative to MTA Angelus. However, further clinical studies are required to confirm its application.

Effect of Manipulation Methods and Storage Environments on the Microstructural, Chemical, and Mechanical Properties of Calcium-Enriched Mixture Cement

This study aimed to evaluate the impact of different manipulation methods and storage environments on the microstructural, chemical, and mechanical properties of calcium-enriched mixture (CEM) cement. Four sample groups were examined, including nondried (ND-I) and dried (D-I) groups placed directly in an incubator, dried samples stored in phosphate-buffered saline (PBS) (D-P), and dried samples stored in distilled water (D-W). Various analyses, including Vickers microhardness, compressive strength, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS) were conducted after incubating the samples for 7 days. The data were analyzed by Shapiro-Wilk, Levene, independent t, one-way ANOVA, and Tukey HSD tests. Key findings include the ND-I group exhibited a significantly longer setting time but the lowest microhardness and compressive strength. D-P showed the highest microhardness, while D-W displayed the highest compressive strength. FTIR analysis revealed vibration modes related to (PO4)3- ions and Si compounds in all groups, with dried groups showing more vibrations of (PO4)3- ions and OH groups, and D-P and D-W groups displayed vibration modes of (CO3)2- ions. XRD analysis indicated increased tri/dicalcium silicate reflections in CEM groups exposed to PBS or distilled water. D-I and D-W groups presented hexagonal or rectangular cubic and needle-like crystals, while D-P showed a homogeneous globular structure covered with fine crystals. The order of the weight percentage of major elemental constituents of D-P group was oxygen, calcium, phosphorus, zirconium, barium, carbon, silicon, and sulfur. Incremental placement, drying each increment, and exposing CEM to PBS/tissue fluids result in a faster set and more tolerant cement with a more uniform microstructure. The formation of hydroxyapatite can occur on the surface of the set cement.

Effects of Adding Tricalcium Silicate Nanoparticles to the Universal G2 Bond Adhesive as Self-Etch Mode on the Shear Bond Strength to the Orthodontic Bracket

OBJECTIVE

This study investigated the effects of adding tricalcium silicate nanoparticles (TCSNp) to the universal G2 bond adhesive (G2BU) in self-etch (SE) mode on shear bond strength (SBS) to orthodontic brackets, cytotoxicity, and degree of conversion (DC).

MATERIAL AND METHODS

A total of 176 human teeth were divided into four groups based on TCSNp concentration in G2BU adhesive: 0% (control), 1%, 3%, and 5%. The G2BU adhesive consists of a hydrophilic primer (P) and a hydrophobic bonding agent (2B). TCSNp were added to the 2B component by mixing 0.1, 0.3, and 0.5 g of TCSNp with 9.9, 9.7, and 9.5 g of 2B, respectively. SBS was assessed after 24 h of water storage and 5000 thermocycles using a universal testing machine. Cytotoxicity was evaluated using the MTT assay on rat embryo fibroblast cells, and DC was measured using fourier-transform infrared spectroscopy. Statistical analysis included one-way ANOVA and Tukey's post-hoc test, with significance set at p < 0.05.

RESULTS

After 24 h, mean SBS values were 15.58 MPa (control), 13.66 MPa (1% TCSNp), 15.99 MPa (3% TCSNp), and 12.04 MPa (5% TCSNp). After 5000 thermocycles, SBS values decreased to 12.91 MPa (control), 12.42 MPa (1% TCSNp), 11.11 MPa (3% TCSNp), and 10.21 MPa (5% TCSNp). ANOVA showed significant differences between groups (p < 0.05), except between the control and 3% TCSNp groups. Cell viability increased with higher TCSNp concentrations, with significant differences at 72 h between control and 5% TCSNp groups (p = 0.014). Mean DC values were 51.66% (control), 49.33% (1% TCSNp), 49.66% (3% TCSNp), and 48% (5% TCSNp). ANOVA indicated no significant differences between groups.

CONCLUSIONS

Adding TCSNp to G2BU in SE mode maintains clinically acceptable SBS levels and enhances cytocompatibility. Higher TCSNp concentrations may reduce SBS and DC slightly. Further studies are needed to evaluate long-term effects.

Evaluation of the Effect of Nanosilver and Bismuth oxide on the Radiopacity of a Novel Hydraulic Calcium Silicate-based Endodontic Sealer: An In vitro Study

Background and Aim

A wide range of dental materials have incorporated the concept of nanotechnology into their composition to enhance their physical and antimicrobial properties. In this pretext, silver nanoparticles (AgNPs) are among the most commonly used nanoparticles which are exceptionally noteworthy for their role in medical applications as an antibacterial agent. Another essential, desirable physical characteristic of all endodontic cements is their radiopacity, while in similar context, various radiopacifying agents such as bismuth oxide, barium sulfate, and even AgNPs have been incorporated in endodontic sealers to enhance their physical properties. The aim of the present study was to assess whether the incorporation of AgNPs and 10% bismuth oxide imparted the required radiopacity to the novel cement material (Nano CS) as per the requirement and standards laid by the International Organization for Standardization (ISO) guidelines and whether it complied with the ISO 6876:2001 specifications to achieve the necessary norms.

Materials and Methods

The structural characteristics of the novel cement material (Nano CS) were observed using energy-dispersive X-ray analysis under a Zeiss Gemini 500 Field Emission Scanning Electron Microscope, while radiopacity of the test material (Nano CS) was assessed with the help of an aluminum (Al) step-wedge using a nondestructive testing method following ISO guidelines. The optical density of the test material (Nano CS) was tested with the specimens of mineral trioxide aggregate (MTA) as the standard cement material along with the specimens of enamel and dentin that were 1 mm thick, and Al of appropriate thickness with the desired and equivalent radiopacity.

Results

The findings of the present study suggested MTA to have higher radiopacity index equivalent to 4.56 ± 0.00 mm thickness of Al when compared to the test material (Nano CS) (2.78 ± 0.01 mm thickness of Al) and enamel (4.09 ± 0.01 mm thickness of Al) and dentin (2.01 ± 0.01 mm thickness of Al) specimens. Furthermore, the radiopacity index of test material (Nano CS) was found to be more when compared to dentin, though, less when compared to the enamel specimens with the results being statistically highly significant (P < 0.001).

Conclusion

The addition of nanosilver and bismuth oxide to the test material (Nano CS) imparted characteristic radiopacity, though the required specifications laid down by the ISO standards were not achieved. Increasing the concentration of the additives used might be considered to bring in the required radiopacity without having a significant impact on the physical and biological properties of the test material (Nano CS) intended to be used for endodontic applications.

Biocompatibility and pro-mineralization effects of premixed calcium silicate-based materials on human dental pulp stem cells: An in vitro and in vivo study

Premixed calcium silicate-based materials have recently been developed and are recommended for a wide range of endodontic procedures, including vital pulp therapy. This study investigated the in vitro biocompatibility and pro-mineralization effect and in vivo reparative dentin formation of EndoSequence Root Repair Material, EndoSequence BCRRM, Bio-C Repair, and Well-pulp PT. Both fresh and set extracts had no detrimental effect on the growth of human dental pulp stem cells. The fresh extracts had a higher calcium concentration than the set extracts and induced considerably greater mineralized nodule formation. EndoSequence Root Repair Material had the longest setting time, whereas Bio-C Repair had the shortest. When these materials were applied to exposed rat molar pulps, mineralized tissue deposition was found at the exposure sites after 2 weeks. These results indicate that the premixed calcium silicate-based materials tested could have positive benefits for direct pulp capping procedures.

Silicon impacts collagen remodelling and mineralization by human dental pulp stem cells in 3D pulp-like matrices

OBJECTIVES

Silicon-releasing biomaterials are widely used in the field of dentistry. However, unlike bone, very little is known about the role of silicon on dental tissue formation and repair. This study investigates the influence of silicic acid on the survival, differentiation and mineralizing ability of human dental pulp stem cells (hDPSCs) in 3D pulp-like environments METHODS: Dense type I collagen hydrogels seeded with hDPSCs were cultured over 4 weeks in the presence of silicic acid at physiological (10 μM) and supraphysiological (100 μM) concentrations. Cell viability and proliferation were studied by Alamar Blue and live/dead staining. The collagen network was investigated using second harmonic generation imaging. Mineral deposition was monitored by histology and scanning electron microscopy. Gene expression of mineralization- and matrix remodeling-associated proteins was studied by qPCR.

RESULTS

Presence of silicic acid did not show any significant influence on cell survival, metabolic activity and gene expression of key mineralization-related proteins (ALP, OCN, BSP). However, it induced enhanced cell clustering and delayed expression of matrix remodeling-associated proteins (MMP13, Col I). OPN expression and mineral deposition were inhibited at 100 μM. It could be inferred that silicic acid has no direct cellular effect but rather interacts with the collagen network, leading to a modification of the cell-matrix interface.

SIGNIFICANCE

Our results offer advanced insights on the possible role of silicic acid, as released by pulp capping calcium silicates biomaterials, in reparative dentine formation. More globally, these results interrogate the possible role of Si in pulp pathophysiology.

Efficacy of various techniques in calcium silicate-based intracanal medicament removal: a micro-CT analysis

The purpose of this study was to evaluate the efficacy of different techniques in removing calcium silicate intracanal medicament (Bio-C Temp). Forty human single-canaled premolars were randomly distributed into five groups (n = 8). All root canals were instrumented, then filled with Bio-C Temp. Following 1-week incubation, the intra-canal medicament was removed using one of five techniques according to tooth group: conventional syringe irrigation, Endo Activator, passive ultrasonic irrigation (PUI), ProTaper Universal F3 and XP-endo Finisher (XPF). Micro-CT scanning was performed before and after removal of Bio-C Temp. All techniques significantly reduced the volume of Bio-C Temp (p < 0.001) without reaching complete elimination. The percentage of Bio-C Temp removed was significantly higher in the XPF group (98.2%) compared to conventional syringe irrigation (70.6%), the Endo Activator (75.7%), and the ProTaper Universal (76.6%). There was no significant difference between the XPF and PUI (95.1%) groups. None of the removal techniques were able to completely remove Bio-C Temp from the root canal. However, XPF was the most effective method, but was not statistically significant when compared to PUI. Clinical Relevance: This study demonstrated that both XPF and PUI outperform conventional irrigation in removing Bio-C Temp intracanal medicament.

Apoptotic effects of biodentine, calcium-enriched mixture (CEM) cement, ferric sulfate, and mineral trioxide aggregate (MTA) on human mesenchymal stem cells isolated from the human pulp of exfoliated deciduous teeth

BACKGROUND

Preservation of primary teeth in children is highly important. Pulpotomy is a commonly performed treatment procedure for primary teeth with extensive caries. Thus, biocompatibility of pulpotomy agents is highly important. Biodentine, calcium enriched mixture (CEM) cement, ferric sulfate, and mineral trioxide aggregate (MTA) Angelus are commonly used for this purpose. Thus, this study aimed to assess the apoptotic effects of Biodentine, CEM cement, ferric sulfate, and MTA on stem cells isolated from the human pulp of exfoliated deciduous teeth.

METHODS

In this in-vitro, experimental study, stem cells isolated from the human pulp of exfoliated deciduous teeth were exposed to three different concentrations of Biodentine, CEM cement, ferric sulfate, and MTA for different time periods. The cytotoxicity of the materials was evaluated by flow cytometry using the annexin propidium iodide (PI) kit. Data were analyzed by ANOVA and Tukey's test at P<0.05 level of significance.

RESULTS

All four tested materials induced significantly greater apoptosis compared with the control group. The difference in cell apoptosis caused by the first concentration of ferric sulfate and MTA was not significant at 24 hours. In other comparisons, the cytotoxicity of ferric sulfate was significantly lower than that of other materials. Biodentine showed higher cytotoxicity than MTA at first; but this difference faded over time. The cytotoxicity of CEM cement was comparable to that of MTA. The highest cell viability was noted at 24 hours in presence of the minimum concentration of ferric sulfate. The lowest cell viability was noted at 72 hours in presence of the maximum concentration of CEM cement.

CONCLUSIONS

In comparison with other materials, ferric sulfate showed minimum cytotoxicity; the cytotoxicity of the three cements was comparable. It appears that the concentration of ferric sulfate and the composition of cements are responsible for different levels of cytotoxicity.

A 3D printed ultra-short dental implant based on lattice structures and ZIRCONIA/Ca2SiO4 combination

Additive Manufacturing (AM) enables the generation of complex geometries and controlled internal cavities that are so interesting for the biomedical industry due to the benefits they provide in terms of osseointegration and bone growth. These technologies enable the manufacturing of the so-called lattice structures that are cells with different geometries and internal pores joint together for the formation of scaffold-type structures. In this context, the present paper analyses the feasibility of using diamond-type lattice structures and topology optimisation for the re-design of a dental implant. Concretely, a new ultra-short implant design is proposed in this work. For the manufacturing of the implant, digital light processing additive manufacturing technique technology is considered. The implant was made out of Nano-zirconia and Nano-Calcium Silicate as an alternative material to the more common Ti6Al4V. This material combination was selected due to the properties of the calcium-silicate that enhance bone ingrowth. The influence of different material combination ratios and lattice pore sizes were analysed by means of FEM simulation. For those simulations, a bio-material bone-nanozirconia model was considered that represents the final status after the bone is integrated in the implant. Results shows that the mechanical properties of the biocompatible composite employed were suitable for dental implant applications in dentistry. Based on the obtained results it was seen that those designs with 400 μm and 500 μm pore sizes showed best performance and led to the required factor of safety.

Bioactive ceramic-based materials: beneficial properties and potential applications in dental repair and regeneration

Bioactive ceramics, primarily consisting of bioactive glasses, glass-ceramics, calcium orthophosphate ceramics, calcium silicate ceramics and calcium carbonate ceramics, have received great attention in the past decades given their biocompatible nature and excellent bioactivity in stimulating cell proliferation, differentiation and tissue regeneration. Recent studies have tried to combine bioactive ceramics with bioactive ions, polymers, bioactive proteins and other chemicals to improve their mechanical and biological properties, thus rendering them more valid in tissue engineering scaffolds. This review presents the beneficial properties and potential applications of bioactive ceramic-based materials in dentistry, particularly in the repair and regeneration of dental hard tissue, pulp-dentin complex, periodontal tissue and bone tissue. Moreover, greater insights into the mechanisms of bioactive ceramics and the development of ceramic-based materials are provided.

Evaluation of Antimicrobial Properties, Cell Viability, and Metalloproteinase Activity of Bioceramic Endodontic Materials Used in Vital Pulp Therapy

This study aimed to evaluate the antimicrobial properties, cell viability, and matrix metalloproteinase (MMP) inhibition capacity of several endodontic materials aimed at vital pulp therapy: Pro Root MTA®, EndoSequence®, Biodentine®, MTA Angelus®, TheraCal LC®, and BioC Repair®. The materials were prepared according to the manufacturer's instructions. Antimicrobial tests were conducted using a microcosm biofilm model, cell viability was assessed using murine fibroblasts (L929), and MMP activity was analyzed through electrophoresis. The results showed that BioC Repair®, Biodentine®, and EndoSequence® exhibited similar antimicrobial properties, while MTA Angelus® and ProRoot MTA® had inferior results but were comparable to each other. In terms of cell viability, no significant differences were observed among the materials. EndoSequence® demonstrated the highest MMP inhibition capacity. In conclusion, BioC Repair®, Biodentine®, EndoSequence®, and TheraCal® showed better antimicrobial properties among the tested materials. The materials did not exhibit significant differences in terms of cytotoxicity. However, EndoSequence® displayed superior MMP inhibition capacity.

Bioceramic versus traditional biomaterials for endodontic sealers according to the ideal properties

Odontology, as a scientific discipline, continuously collaborates with biomaterials engineering to enhance treatment characteristics and patients' satisfaction. Endodontics, a specialized field of dentistry, focuses on the study, diagnosis, prevention, and treatment of dental disorders affecting the dental pulp, root, and surrounding tissues. A critical aspect of endodontic treatment involves the careful selection of an appropriate endodontic sealer for clinical use, as it significantly influences treatment outcomes. Traditional sealers, such as zinc oxide-eugenol, fatty acid, salicylate, epoxy resin, silicone, and methacrylate resin systems, have been extensively used for decades. However, advancements in endodontics have given rise to bioceramic-based sealers, offering improved properties and addressing new challenges in endodontic therapy. In this review, a classification of these materials and their ideal properties are presented to provide evidence-based guidance to clinicians. Physicochemical properties, including sealing ability, stability over time and space, as well as biological properties such as biocompatibility and antibacterial characteristics, along with cost-effectiveness, are essential factors influencing clinicians' decisions based on individual patient evaluations.

Analysis of the cytotoxicity and bioactivity of CeraSeal, BioRoot™ and AH Plus® sealers in pre-osteoblast lineage cells

BACKGROUND

The objective of the present study was to evaluate in vitro the cytotoxicity and bioactivity of various endodontic sealers (CeraSeal, BioRoot™ and AH Plus®) in pre-osteoblast mouse cells (MC3T3 cells).

METHODS

MC3T3 cells (ATCC CRL-2594) were plated in 1 × 104 cells/well in 96-well plates in contact with endodontic sealers at concentrations of 1:10 and 1:100. Cell viability was evaluated by MTT assay after 24 and 48 h. In addition, sealer bioactivity was measured by RT-PCR for mediator of inflammation (Tnf, Ptgs2) and mineralization (Runx2, Msx1, Ssp1 and Dmp1) after 24 h and by Alizarin Red S Assay of mineralization after 28 days. Data were analyzed using one-way ANOVA followed by the Tukey's post-test at a significance level of 5%.

RESULTS

BioRoot™ presented 24-hour cytotoxicity (p < 0.05) at 1:10 concentration. In the period of 48 h, no endodontic cement was cytotoxic to the cells compared to the control (p > 0.05). TNF-α gene expression was induced by AH Plus® (p < 0.05), while Ptgs2 was induced by the CeraSeal and BioRoot™ (p < 0.05). The expression of Runx2 was stimulated by BioRoot™ and AH Plus® (p < 0.05). In contrast, the expression of Dmp-1 Dmp1 was higher for the CeraSeal and BioRoot™ (p < 0.05). Nonetheless, the sealers did not impact the formation of mineralization nodules (p > 0.05).

CONCLUSION

CeraSeal, BioRoot™ and AH Plus® sealers were not cytotoxic to MC3T3 cells within 48 h, but differentially induced the expression of genes related to inflammation and mineralization without impacting biomineralization by the cells.

A novel simplified approach for endodontic retrograde surgery in short single-rooted teeth

BACKGROUND

High technical thresholds, long operative times, and the need for expensive and specialized equipment impede the widespread adoption of endodontic microsurgery in many developing countries. This study aimed to compare the effects of a simplified, cost-effective, and time-efficient surgical approach involving orthograde obturation using biological ceramic material greater than 6 mm combined with apicoectomy for single-rooted teeth with short lengths with those of the conventional and current standard methods.

MATERIALS AND METHODS

Forty-five premolars equally categorized into three groups: conventional surgery group, standard surgery group, and modified surgery group. A µCT scan was used to calculate the volume of voids. A micro-leakage test and scanning electron microscope (SEM) were performed to assess the sealing effect. Additionally, four cases of chronic periapical periodontitis in the anterior region were selected, and the patients received either the modified approach or the standard surgery for endodontic microsurgery.

RESULTS

The volumes of voids in the apical 0-3 mm of the modified group and the standard group were comparable. The micro-leakage test and SEM examination demonstrated closely bonded fillings in the dentinal walls in both the modified surgery group and standard surgery group. The outcomes of the preliminary application of this modified procedure on patients were successful at the time of the follow-up cutoff.

CONCLUSIONS

The modified surgery group exhibited similar root canal filling and apical sealing abilities with the standard procedure for single-rooted teeth with short lengths (< 20 mm). The preliminary application of this modified surgical procedure achieved favorable results.

Evaluation of the genotoxicity, cytotoxicity, and bioactivity of calcium silicate-based cements

BACKGROUND

As calcium silicate-based cements (CSCs) have found success in various vital pulp therapy applications, several new CSC products have emerged. This study aimed to assess the genotoxicity, cytotoxicity, and bioactivity of four CSCs by comparing the newly introduced materials Bio MTA+ and MTA Cem with previously studied materials, Biodentine and NeoMTA.

METHODS

Genotoxicity was evaluated using the micronucleus (MN) assay in human peripheral blood lymphocyte cells, measuring MN frequency and nuclear division index (NDI). Cytotoxicity was assessed in human dental pulp stem cells through the Water-Soluble Tetrazolium Salt-1 (WST-1) colorimetric assay. Bioactivity was determined by ELISA, measuring the levels of angiogenic and odontogenic markers (BMP-2, FGF-2, VEGF, and ALP). Statistical analyses included ANOVA, Dunnet and Sidak tests, and Wald chi-square test. (p < .05).

RESULTS

The MN frequency in the groups was significantly lower than that in the positive control group (tetraconazole) (p < .05). NDI values decreased with increasing concentration (p < .05). Bio MTA+ and NeoMTA showed decreased cell viability at all concentrations in 7-day cultures (p < .01). All materials increased BMP-2, FGF-2, and VEGF levels, with Biodentine and NeoMTA showing the highest levels of BMP-2 and FGF-2 on day 7. Biodentine displayed the highest VEGF levels on day 7. Biodentine and NeoMTA groups exhibited significantly higher ALP activity than the Bio MTA+ and MTA Cem groups by day 7.

CONCLUSION

Bio MTA+ and MTA Cem demonstrated no genotoxic or cytotoxic effects. Moreover, this study revealed bioactive potentials of Bio MTA+ and MTA Cem by enhancing the expression of angiogenic and osteogenic growth factors.

Modern methods and materials used to treat root perforation: effectiveness comparison

This study aims to experimentally compare the efficacy of different endodontic materials (iRoot BP Plus, Biodentine, MTA, Rootdent, and Trioxide) in the treatment of pulpitis and perforations on extracted tooth specimens. Additionally, the study aims to investigate the influence of iRoot BP Plus endodontic material on the regenerative processes following pulp amputation in laboratory animals. The secondary goal is to evaluate the effect of iRoot BP Plus on the restoration process in laboratory animals after pulp removal. The study presents a micropermeability analysis of the selected biomaterials performed on a sample of 50 single-rooted apical teeth in 2022. All teeth underwent endodontic treatment. Changes in molar morphology were investigated with eight laboratory animals (rabbits, 3 months old, all males) after simulated pulp removal and subsequent treatment with the iRoot BP Plus biomaterials. iRoot BP Plus appeared to be more effective in retrograde apical root filling than other biomaterials, as evidenced by its higher sealing effect. An experiment involving animal participants revealed the presence of protective adaptive mechanisms, which manifested in the form of an inflammatory process within 6 weeks after the dental pulp was removed. The connective tissue replaced the necrosis, and new capillaries began to form intensively. These dental outcomes suggest that iRoot BP Plus enables hermetical sealing in tooth restoration with good adhesion. Thus, it may have the ability to promote more active tissue regeneration after pulp removal.

Comparative Evaluation of Push-out Bond Strength of Three Different Root Canal Sealers: An In Vitro Study

AIM

The aim of this present study was to compare the dislodgement resistance of calcium silicate-based sealer, zinc oxide sealer, and a new sealer combining both zinc oxide and calcium silicate-based sealer in vitro.

MATERIALS AND METHODS

60 single-rooted human teeth were instrumented with F3 Protaper Gold. All endodontic canals were filled using gutta percha cones using the cold lateral condensation technique in combination using one of the mentioned sealers (n = 20 per group). The teeth were divided into three groups: group A consisted of Sealite® Ultra, group B consisted of K-Sealer®, and group C consisted of BioRoot® RC. After 2 months of incubation (37°C, 100% humidity) and after cutting out 2 mm from the most apical portion of the root apex, six slices of 1 mm thickness were generated. Mechanical dislodgement resistance was examined using a universal pressure-testing machine and the push-out bond strength (POBS) was calculated. Specimens were examined under 20× magnification to define the bond failure mode. Statistical analysis was executed using ANOVA, post hoc Turkey test for pairwise comparisons and Kruskal-Wallis tests.

RESULTS

The POBS of BioRoot® was significantly higher than the POBS of the two other sealers with a mean of 10.54 MPa ± 2.10 and 5.73 MPa ± 2.34, respectively (p < 0.001). Sealite® and K-Sealer® showed similar results in the median and coronal part. K-Sealer® revealed highest POBS compared with Sealite® in the apical part (p < 0.05).

CONCLUSION

The POBS of the zinc oxide and calcium silicate-based sealer was significantly lower compared with calcium silicate. Sealite® and K-Sealer® exhibited almost same results. BioRoot showed the highest POBS of all sealers.

CLINICAL SIGNIFICANCE

The current study was needed to evaluate the bond strength of three different cements to dentinal walls, by evaluating their respective POBS in vitro. The findings of this study may provide guidance for the clinician in the selection of an adequate endodontic sealer that guarantees an enhanced adhesive seal between the Gutta-percha and the dentinal canal walls. How to cite this article: Makhlouf MP, El Helou JD, Zogheib CE, et al. Comparative Evaluation of Push-out Bond Strength of Three Different Root Canal Sealers: An In Vitro Study. J Contemp Dent Pract 2024;25(1):15-19.

In vivo cytotoxicity analysis of bioceramic root canal sealers on zebrafish embryo

Background

This study evaluated the cytotoxicity of four bioceramic root canal sealers (RCSs) in vivo. The embryonic zebrafish characteristics, such as mortality, survival, hatching, and general morphology, served as the parameters for assessing cytotoxicity.

Methods

The RCSs, namely GuttaFlow Bioseal, MTA Fillapex, CeraSeal Bioceramic, and iRoot SP, were mixed according to the manufacturer's guidelines. The extract solution was prepared by immersing the set RCS into 1X dilution of E3 solution. Then, the extract solution was delivered into a Petri dish where zebrafish embryos were allowed to develop. Cytotoxicity was evaluated 24, 48, 72, and 96 hours after fertilization.

Results

The Kruskal-Wallis test showed that except for GuttaFlow Bioseal, the mortality, survival, and hatching of zebrafish embryos for the remaining three bioceramic RCSs were significantly different from the negative controls (P<0.05). Significant differences were also evident in the mortality, survival, and hatching of zebrafish embryos between GuttaFlow Bioseal and three other RCSs (P<0.05).

Conclusion

GuttaFlow Bioseal was less cytotoxic than other bioceramics RCSs; MTA Fillapex, CeraSeal Bioceramic root canal sealer, and iRoot SP root canal sealer exhibited comparable cytotoxicity.

Clinical application of calcium silicate-based bioceramics in endodontics

Pulp treatment is extremely common in endodontics, with the main purpose of eliminating clinical symptoms and preserving tooth physiological function. However, the effect of dental pulp treatment is closely related to the methods and materials used in the process of treatment. Plenty of studies about calcium silicate-based bioceramics which are widely applied in various endodontic operations have been reported because of their significant biocompatibility and bioactivity. Although most of these materials have superior physical and chemical properties, the differences between them can also have an impact on the success rate of different clinical practices. Therefore, this review is focused on the applications of several common calcium silicate-based bioceramics, including Mineral trioxide aggregate (MTA), Biodentine, Bioaggregate, iRoot BP Plus in usual endodontic treatment, such as dental pulp capping, root perforation repair, regenerative endodontic procedures (REPs), apexification, root-end filling and root canal treatment (RCT). Besides, the efficacy of these bioceramics mentioned above in human trials is also compared, which aims to provide clinical guidance for their clinical application in endodontics.

Impact of corticosteroid administration on the response of exposed dental pulp to capping with bioactive cements-experimental study on mongrel dogs

BACKGROUND

Corticosteroids are commonly used as a treatment for a variety of pathological conditions, however, systemic corticosteroid administration has adverse effects including impaired immune response and wound healing. Such complications may affect pulp healing after direct pulp capping. The current study evaluated the influence of corticosteroids on the healing ability of exposed dogs' dental pulps after direct pulp capping (DPC) with bioactive materials.

METHODS

Ten healthy male dogs were assigned randomly into two groups, 5 dogs each: group I represent the control group which did not receive any medication, and group II was given corticosteroid for 45 days before DPC and till the dogs were euthanized (n = 75 teeth for each group). Following mechanical exposure, the pulps were randomly capped with either Ca(OH)2, MTA, or Biodentine. The pulpal tissues' reaction to the capping materials was evaluated 65 days postoperatively according to the following parameters: calcific bridge formation, pulpal inflammation, pulp necrosis, and bacterial infiltration.

RESULTS

The corticosteroid-treated group revealed no significant difference compared to the control group concerning the pulp healing response (P > 0.05). Both Biodentine and MTA-treated specimens revealed significant differences with Ca(OH)2-treated specimens (P < 0.05) which displayed a superior positive effect of both MTA and Biodentine to Ca(OH)2 regarding all the parameters.

CONCLUSIONS

Direct pulp capping technique whenever indicated in subjects treated with corticosteroid immunosuppressive drugs like prednisone performed well in aseptic conditions especially when capped with bioactive materials.

Ex Vivo Osteogenesis Induced by Calcium Silicate-Based Cement Extracts

Calcium silicate-based cements are used in a variety of clinical conditions affecting the pulp tissue, relying on their inductive effect on tissue mineralization. This work aimed to evaluate the biological response of calcium silicate-based cements with distinct properties-the fast-setting Biodentine™ and TotalFill^® BC RRM™ Fast Putty, and the classical slow-setting ProRoot^® MTA, in an ex vivo model of bone development. Briefly, eleven-day-old embryonic chick femurs were cultured for 10 days in organotypic conditions, being exposed to the set cements' eluates and, at the end of the culture period, evaluated for osteogenesis/bone formation by combining microtomographic analysis and histological histomorphometric assessment. ProRoot^® MTA and TotalFill^® extracts presented similar levels of calcium ions, although significantly lower than those released from Biodentine^TM. All extracts increased the osteogenesis/tissue mineralization, assayed by microtomographic (BV/TV) and histomorphometric (% of mineralized area; % of total collagen area, and % of mature collagen area) indexes, although displaying distinct dose-dependent patterns and quantitative values. The fast-setting cements displayed better performance than that of ProRoot^® MTA, with Biodentine^TM presenting the best performance, within the assayed experimental model.

Cytotoxicity and Mineralization Activity of Calcium Silicate-Based Root Canal Sealers Compared to Conventional Resin-Based Sealer in Human Gingival Fibroblast Cells

Background

Root canal obturation is performed by gutta-percha cones and sealer. Therefore, these materials, specially sealers, must be biocompatible. This study investigated the cytotoxicity and mineralization activity of two calcium silicate-based sealers (Endoseal MTA and Ceraseal) and an epoxy resin-based sealer (AH26).

Materials and Methods

In this experiment, the cytotoxicity of Endoseal MTA, Ceraseal, and AH26 on human gingival fibroblast cells was examined using Methyl-Thiazol-Tetrazolium assay at time intervals of 24, 48, 72, and 120 hr. The mineralization activity of sealers was evaluated by Alizarin red staining assay. Prism, ver.3, software was used to perform statistical tests. One-way analysis of variance analysis, followed by Tukey's test, was used to determine the group differences. P-values < 0.05 were considered statistically significant.

Results

Cytotoxicity of sealers decreased gradually (P < 0.0001). AH26 showed the highest level of cytotoxicity (P < 0.001). In terms of cytotoxicity, no considerable differences were observed between the two-calcium silicate-based sealers (P > 0.05). AH26 showed the lowest mineralization activity (P < 0.0001). Among the calcium silicate-based sealers, mineralization and formation of calcium nodules were more frequently observed in the Endoseal MTA group (P < 0.001).

Conclusion

The examined calcium silicate-based sealers had less cytotoxicity and higher mineralization activity than the resin-based sealer (AH26). There was negligible difference between the cytotoxicity of the two-calcium silicate-based, but the cell mineralization caused by Endoseal MTA was higher.

Bioceramics in Endodontics: Updates and Future Perspectives

Bioceramics, with excellent bioactivity and biocompatibility, have been widely used in dentistry, particularly in endodontics. Mineral trioxide aggregate (MTA) is the most widely used bioceramic in endodontics. Recently, many new bioceramics have been developed, showing good potential for the treatment of endodontic diseases. This paper reviews the characteristics of bioceramics and their applications in various clinical endodontic situations, including root-end filling, root canal therapy, vital pulp therapy, apexification/regenerative endodontic treatment, perforation repair, and root defect repair. Relevant literature published from 1993 to 2023 was searched by keywords in PubMed and Web of Science. Current evidence supports the predictable outcome of MTA in the treatment of endodontic diseases. Although novel bioceramics such as Biodentine, EndoSequence, and calcium-enriched mixtures have shown promising clinical outcomes, more well-controlled clinical trials are still needed to provide high-level evidence for their application in endodontics. In addition, to better tackle the clinical challenges in endodontics, efforts are needed to improve the bioactivity of bioceramics, particularly to enhance their antimicrobial activity and mechanical properties and reduce their setting time and solubility.

Comparative Evaluation of Physicomechanical Properties and Antimicrobial Activity of White Portland Micro- and Nanoparticulate Peruvian Cement, Mineral Trioxide Aggregate, and Neomineral Trioxide Aggregate

AIM

To compare the surface microhardness, compressive strength, and antimicrobial activity of white Portland nanoparticle and microparticle Peruvian cement, mineral trioxide aggregate (MTA), and neomineral trioxide aggregate (NeoMTA) at 24 hours and 28 days.

MATERIALS AND METHODS

Twenty specimens were prepared for each group of cement microparticulated powder (PCm), nanoparticulated cement (PCn), MTA, and NeoMTA to be evaluated at two different times, 24 hours and 28 days for the surface microhardness test and compressive strength. For the antimicrobial activity tests, another 20 specimens were prepared for each group of cement where they were subdivided into two subgroups according to the different periods at 24 hours and 48 hours. For the surface microhardness and compressive strength, the specimens, and the cement groups were mixed according to the manufacturer's instructions and transferred to a cylindrical polyethylene mold of 6-mm diameter and 4-mm height. The compressive strength test was conducted using a universal testing machine. Moreover, the agar diffusion technique was to evaluate the antibacterial and antifungal activity of the American Type Culture Collection (ATCC) Enterococcus faecalis and Candida albicans. Finally, the data were statistically analyzed.

RESULTS

The highest microhardness values for the 24-hour subgroup were recorded for NeoMTA cement (16.99 ± 2.02), followed by MTA, PCn, and PCm, respectively. As for the 28-day subgroup, PCn cement (41.64 ± 3.20) presented the highest microhardness, followed by NeoMTA, PCm, and MTA, respectively, with statistically significant differences among them. The compressive strength of both subgroups 24 hours and 28 days exhibited the highest mean for PCn (41.3 ± 4.29, 65.74 ± 3.06), followed by PCm, NeoMTA, and the lowest value for MTA cement. Finally, for the antimicrobial activity, the highest mean for the 24-hours and 48-hours subgroup was recorded for NeoMTA cement (17.6 ± 1.26, 17.8 ± 1.44), followed by PCn, PCm, and the lowest value for MTA, with significant differences between them.

CLINICAL SIGNIFICANCE

It is highly recommended, Portland cement (PC) as a viable substitute since it has very similar components and properties, but at a lower cost.

CONCLUSION

Regardless of the evaluation time, PCn produced higher surface microhardness and compressive strength; however, NeoMTA showed higher antimicrobial activity.

Real-time evaluation of the biocompatibility of calcium silicate-based endodontic cements: An in vitro study

INTRODUCTION

An ideal filling material should hermetically seal the communication pathways between the canal system and surrounding tissues. Therefore, during the last few years, the development of obturation materials and techniques to create optimal conditions for the proper healing of apical tissues has been a focus of interest. The effects of calcium silicate-based cements (CSCs) on periodontal ligament cells have been investigated, and promising results have been obtained. To date, there are no reports in the literature that have evaluated the biocompatibility of CSCs using a real-time live cell system. Therefore, this study aimed to evaluate the real-time biocompatibility of CSCs with human periodontal ligament cells (hPDLCs).

METHODOLOGY

hPDLC were cultured with testing media of endodontic cements for 5 days: TotalFill-BC Sealer, BioRoot RCS, Tubli-Seal, AH Plus, MTA ProRoot, Biodentine, and TotalFill-BC RRM Fast Set Putty. Cell proliferation, viability, and morphology were quantified using real-time live cell microscopy with the IncuCyte S3 system. Data were analyzed using the one-way repeated measures (RM) analysis of variance multiple comparison test (p < .05).

RESULTS

Compared to the control group, cell proliferation in the presence of all cements was significantly affected at 24 h (p < .05). ProRoot MTA and Biodentine lead to an increase in cell proliferation; there were no significant differences with the control group at 120 h. In contrast, Tubli-Seal and TotalFill-BC Sealer inhibited cell growth in real-time and significantly increased cell death compared to all groups. hPDLC co-cultured with sealer and repair cements showed a spindle-shaped morphology except with cements Tubli-Seal and TotalFill-BC Sealer where smaller and rounder cells were obtained.

CONCLUSIONS

The biocompatibility of the endodontic repair cements performed better than the sealer cements, highlighting the cell proliferation of the ProRoot MTA and Biodentine in real-time. However, the calcium silicate-based TotalFill-BC Sealer presented a high percentage of cell death throughout the experiment similar to that obtained.

In vitro evaluation of the sealing ability of combined use of iRoot BP Plus and iRoot SP for root-end filling

OBJECTIVES

The aim of this in vitro study was to evaluate the sealing ability of combined application of iRoot BP Plus Root Repair Material (BP-RRM) and iRoot SP Injectable Root Canal Sealer (SP-RCS) for root-end filling.

MATERIAL AND METHODS

A total of 120 extracted human teeth were used in this study and were randomly divided into four groups. The BP-RRM+SP-RCS group included teeth retro-filled with combined use of BP-RRM and SP-RCS (n=45), and the BP-RRM group included teeth retro-filled by BP-RRM alone (n=45). Teeth without root-end preparation and filling were equally divided into positive control (n=15) and negative control (n=15). The apical sealing ability was evaluated by micro-CT analysis, dye penetrant examination, bacterial leakage test, and glucose leakage test.

RESULTS

Micro-CT analysis showed that the total void fraction of BP-RRM+SP-RCS group was significantly lower than that of BP-RRM group, particularly at the coronal 1/3 segment of the retro-filled roots. Consistently, the maximum linear depth of dye leakage in BP-RRM+SP-RCS group was less than that of BP-RRM group. Bacterial leakage test showed that the microbial leakage in BP-RRM+SP-RCS group was significantly less than that in BP-RRM group. However, no significant difference in glucose leakage between BP-RRM+SP-RCS group and BP-RRM group was observed.

CONCLUSION

Combined use of BP-RRM and SP-RCS for root-end filling promotes apical sealing in vitro.

CLINICAL RELEVANCE

Combined use of BP-RRM and SP-RCS for root-end filling exhibited better apical sealing as compared to BP-RRM alone in vitro, and this may help reducing technical sensitivity and promoting clinical efficiency during endodontic microsurgery.

Fast-Setting Calcium Silicate-Based Pulp Capping Cements-Integrated Antibacterial, Irritation and Cytocompatibility Assessment

Calcium silicate-based cements (CSCs) are endodontic materials widely used in vital pulp-capping approaches. Concerning the clinical application, the reduced set time and pre-mixed formulations are relevant characteristics during the operative management of pulpal exposure, aiming to optimise the work time and improve cross-infection/asepsis control. Additionally, clinical success seems to be greatly dependent on the biological performance of the materials that directly contact the living pulp. As such, this work approaches an integrative biological characterisation (i.e., antibacterial, irritation, and cytocompatibility assays) of three fast-setting CSCs-Biodentine^TM, TotalFill^® BC RRM™ Fast Putty, and Theracal LC^®. These cements, after setting for 24 h, presented the expected topography and elemental composition (assessed by scanning electron microscopy, coupled with EDS analysis), in accordance with the information of the manufacturer. The set cements displayed a significant and similar antibiofilm activity against S. mutans, in a direct contact assay. Twenty-four-hour eluates were not irritant in the standardised CAM assay, but elicited distinct dose- and time-dependent cytotoxicity profiles on fibroblastic cells-i.e., Biodentine was devoid of toxicity, TotalFill presented a slight dose-dependent initial toxicity that was easily overcome, and Theracal LC was deleterious at high concentrations. When compared to long-setting ProRoot MTA cement, which highlighted the pursued integrative approach, Biodentine presented a similar profile, but TotalFill and Theracal LC displayed a poorer performance regarding antibiofilm activity/cytocompatibility features, and Theracal LC suggested eventual safety concerns.

Functional engineering strategies of 3D printed implants for hard tissue replacement

Three-dimensional printing technology with the rapid development of printing materials are widely recognized as a promising way to fabricate bioartificial bone tissues. In consideration of the disadvantages of bone substitutes, including poor mechanical properties, lack of vascularization and insufficient osteointegration, functional modification strategies can provide multiple functions and desired characteristics of printing materials, enhance their physicochemical and biological properties in bone tissue engineering. Thus, this review focuses on the advances of functional engineering strategies for 3D printed biomaterials in hard tissue replacement. It is structured as introducing 3D printing technologies, properties of printing materials (metals, ceramics and polymers) and typical functional engineering strategies utilized in the application of bone, cartilage and joint regeneration.

Scientific production on silicate-based endodontic materials: evolution and current state: a bibliometric analysis

OBJECTIVES

To perform a bibliometric analysis on silicate-based biomaterials in endodontics; to elucidate the evolution and distribution of scientific production regarding research on these biomaterials, the authors and institutions involved, and the most used descriptors/keywords in this field.

MATERIALS AND METHODS

A general advanced broad search was performed in Web of Science Core Collection, using the terms "Silicate" and "Endod*." By means of the "Analyze Results" and "Citation Analysis" tools from Web of Science, bibliometric data were extracted. Bibliometric networks on co-authorship and keyword co-occurrence were illustrated using VOSviewer software tool.

RESULTS

Research in the field of silicate-based endodontic materials in endodontics has followed an exponential crescent tendency over the period between 1995 and 2020. Two major co-authorship networks lead the research production in the field, headed by Gandolfi MG and Prati C, and Rodríguez-Lozano FJ and Forner L; respectively. "Mineral trioxide aggregate," "MTA", "Biocompatibility," "Biodentine," and "In vitro" were the terms with the highest occurrence. The modal study type in this research area are laboratory studies, representing 77.7% of the total number of records. The relationship between keywords illustrates the recent tendency to assess biological properties of MTA and Biodentine, which could be extrapolated to other silicate-based materials.

CONCLUSIONS

The results from the present study highlight the exponential increase and distribution of scientific production on silicate-based materials in endodontics, along with the modal keywords used as descriptors and the major authorship networks involved. The predominance of laboratory studies in this research field reinforces the need for clinical studies, to extrapolate the reported performance and characteristics of silicate-based materials into the clinical setting.

CLINICAL RELEVANCE

The present study may aid the clinician's continuing education and evidence-based practice by providing knowledge and facilitating the literature search on the field of silicate-based biomaterials in endodontics.

Response of periodontal ligament stem cells to lipopolysaccharide and calcium silicate-based materials

This study was conducted to assess the in vitro response of human periodontal ligament stem cells (hPDLSCs) to bacterial lipopolysaccharide (LPS) activation and application of three calcium silicate-based materials (CSBM): Bio-C Sealer, MTA Fillapex and Cimmo HP. Characterization of the CSBM was performed by FTIR (n = 3). Extracts of Bio-C Sealer, MTA Fillapex and Cimmo HP were prepared and diluted (1:1, 1:4 and 1:16). Culture of hPDLSCs was established and treated or not with LPS from Escherichia coli (1 µg/mL) for 7 days. MTT assay was used to assess cell viability at 24, 48 and 72 h (n = 9). Alkaline phosphatase (ALP) activity was indirectly assayed at day 7 (n = 5). TNF-α and Il -1 0 cytokines were quantified by ELISA at 24h-cell supernatants (n = 6). Data were analyzed by ANOVA and Tukey's test (α = 0.05). The cell viability of the LPS-activated hPDLSCs were higher than untreated control (p < 0.05). The application of CSBM affected the cell viability of untreated and LPS-activated cells (p < 0.05). ALP activity was higher for Bio-C Sealer and Cimmo HP in untreated and LPS-activated cells, respectively (p < 0.05). Application of CSBM normalized the TNF-α secretion in the LPS-activated cells (p < 0.05). Only MTA Fillapex in untreated hPDLSCs presented higher values of Il -1 0 (p < 0.05). Taken collectively, the results suggests that the simulation of the inflammatory process by LPS affect the in vitro response the hPDLSCs to the application of the CSBM.

Efficacy of Oregano Essential Oil Extract in the Inhibition of Bacterial Lipopolysaccharide (LPS)-Induced Osteoclastogenesis Using RAW 264.7 Murine Macrophage Cell Line—An In-Vitro Study

Gram-negative, anaerobic bacterias are predominate in periapical infections. The bacterial lipopolysaccharide (LPS) initiates the process of inflammation and periapical bone resorption. Usage of various medicaments retards or inactivates the bacterial endotoxin (LPS). However, the results are not highly effective. In recent years, owing to antimicrobial resistance, the shift from conventional agents to herbal agents has been increased tremendously in research. Keeping this in mind, the present study was formulated to evaluate the efficacy of oregano essential oil in inhibiting bacterial LPS- induced osteoclastogenesis. Four different concentrations (0 ng/mL, 25 ng/mL, 50 ng/mL, and 100 ng/mL) of oregano essential oil extract were added into 96-well culture plate. Under light microscope, quantification of osteoclast cells was performed. One-way ANOVA with post-hoc Tukey test was carried out on SPSS v21. A significant reduction (p < 0.001) in the osteoclast was observed in the experimental groups compared to no oregano essential oil extract (control). A dose-dependent significant reduction (p < 0.001) in osteoclast formation was observed among the experimental groups, with lesser osteoclast seen in group IV with 100 ng/mL of oregano essential oil extract. Thus, it can be concluded that oregano essential oil extract can be utilized as a therapeutic agent that can target bacterial LPS-induced osteoclastogenesis. However, randomized controlled studies should be conducted to assess the potential use of this extract in the periapical bone resorption of endodontic origin.

Comparative Biological Properties and Mineralization Potential of 3 Endodontic Materials for Vital Pulp Therapy: Theracal PT, Theracal LC, and Biodentine on Human Dental Pulp Stem Cells

INTRODUCTION

The aim of this study was to assess the biological properties and mineralization potential of the new Theracal PT (Bisco Inc, Schaumburg, IL) compared with its predecessor Theracal LC (Bisco Inc) and the hydraulic silicate-based cement Biodentine (Septodont, Saint-Maur-des-Fossés, France) on human dental pulp stem cells (hDPSCs) in vitro.

METHODS

Standardized sample discs were obtained for each material (n = 30) together with 1:1, 1:2, and 1:4 material eluates. Previously characterized hDPSCs were cultured with the different materials in standardized conditions, and the following assays were performed: a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, a wound healing assay, Annexin-V-FITC and 7-AAD staining (BD Biosciences, San Jose, CA), reactive oxygen species production analysis, cell adhesion and morphology evaluation via scanning electron microscopy and immunofluorescence, quantification of the expression of osteo/odontogenic markers via real-time quantitative reverse-transcriptase polymerase chain reaction, and alizarin red S staining. Statistical significance was established at P < .05.

RESULTS

All of the tested dilutions of Theracal LC exhibited a significantly higher cytotoxicity and reactive oxygen species production (P < .001) and a lower cell migration rate than the control group (hDPSCs cultured in growth medium without material extracts) at all of the measured time points (P < .001). Both 1:4 Theracal PT and Biodentine-treated hDPSCs exhibited similar levels of cytocompatibility to that of the control group, a significant up-regulation of at least 1 odontogenic marker (Biodentine: dentin sialophosphoprotein (P < .05); Theracal PT: osteonectin and runt-related transcription factor 2 [P < .001]), and a significantly higher mineralized nodule formation (P < .001).

CONCLUSIONS

The newly introduced TheraCal PT offers an improved in vitro cytocompatibility and mineralization potential on hDPSCs compared with its predecessor, TheraCal LC, and comparable biological properties to Biodentine.